Scientific Atlanta D9022, delay D9032?

Similar Questions

• DBC-N790W / Scientific Atlanta Explorer 8300HDC [ERROR]

  When I run an HDMI cable out of the box of cable on my Sony KDL 55HX750 TV, Brighthouse works perfectly. When I connect the HDMI cable out of the cable box ITS 1 of my HBD - N790W Blu Ray input, then use an HDMI cable from the outside on the Sony Blu - Ray, I get this error:

  "Error display HDMI-019 incompatibility".

  I tried different cables, tried to shoot to the top of the box cable before and after the Blu Ray and TV, I tried different ports, and I tried Brighthouse support... nothing works. The Blu Ray is connected to the Internet and it has downloaded all the updates.

  I got this combo for less than 2 weeks - shipped directly from Sony.

  Any ideas?

  "High-bandwidth Digital Content Protection" or HDCP.
  What this means, it is to make a termination device that is HDCP compatible than handshakes with the device source, or in other words, television must handshake with the decoder.
  HDMI has been around for several years, but it still isn't a perfect system and updates the firmware do all the time to improve compatibility. Whatever his reason boxes seem not to be difficult.
  I assume that you have no problem reading from a disc?
  Make sure you have the latest firmware of your TV.
  Unplug all equipment and then connect the HDMI cables, as some connection information is preserved even when turned off.
  Start by turning on the TV and would "start".
  Turn on the Blu ray and would "start". Make sure that 'Quick Start' turned 'OFF '.
  Power on the cable box with the Blu ray via HDMI connection.
  What happen now when you turn on the decoder?
  If it works then try your sequence of normal power. If it isn't...
  I have a box of SA who dislikes my Samsung TV, but when I connect through my Onkyo receiver it works fine.
  You will never have this combination to work properly. The 8300HDC has been around for several years and should have stable firmware but can never work with your Blu - ray player.
  You should maybe try another brand of Blu ray or connect the decoder directly to your TV and audio feed to the Blu ray.

• Scientific Atlanta with Cisco digital signs

  Hi Tomas.

  Wanted to ask you, if I want to play a DMD presentation with live food through digital signs, I need license digital casting too, or just simply create a playlist with source multicast UDP when you use the encoder of SA?

  I see that in DMD, there is this "TV company" option and all the info that I found for him, it's Digital Cast of an object. Can you please clarify this?

  You have no guide for streaming live stream for digital retailers.

  Thank you very much

  Maxim

  Maxim,

  
  

  There are two ways to view the streams live on the

  digital signs:

  
  

  * Use the CAST operator and display channels

  (requires a DISTRIBUTION license)

  
  

  * Use a playlist with asset UDP in the playlist

  
  

  * Use DMD and introduce the active UDP media selection

  
  

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

• Punkbuster Satellite A100-192 - Call of Duty 4 - questions

  I bought call of duty 4 for play online and I m unable to play due to problems with the punkbuster client.
  PunkBuster installs with the game itself, but the service does not start.
  He thought maybe something to do with the game, so I decided to try another game which uses punkbuster. I decided to try America s army (aa was chosen because it's free) and the same problem occurred. PunkBuster service has not started.

  I ve started looking for solutions and I've tried a good number of them.
  I first thought that maybe kaspersky 6 is causing the problem so I deleted (first time I stopped it, not help) and did a clean install of the game. That did not help either.
  Then I thought that maybe it's my network device causing this (Scientific - Atlanta Webstar 2000 cable modem), nope.
  Maybe my network device I use 2 days a week (even if it was obvious that this was not the problem)... zyxel P-660HW-D3 (adsl router). Nothing has changed.

  I used the punkbuster web ticket to send them a query, but after three weeks, there is still no response.

  Other things I've tried (without success):
  -tried to fix punkbuster, in which case the punkbuster has been broken, with the latest version of pbsetup.exe from evenbalance site, also tried to repair with pbsvc.exe
  -clean installation (a clean install in fact because I used youruninstaller 2008 to uninstall the previous installation) of the game without the punkbuster, new installation of the punkbuster, added play in manually.
  -tried to run punkbuster from inside, the game using the console

  Is my model s Toshiba Satellite A100-192 and its system requirements are:
  Intel dual core 2.0 GHz
  1.5 GB OF RAM
  Mobility radeon ATI x 1600 (256 MB)
  etc...
  Running Windows XP home SP2
  Basically, the games work very well in single player mode (bright cod4 settings means, aao) is not a sort of plug system problem.

  My guess is that somehow punkbuster service conflicts with some Toshiba Utilities and therefore does not start.

  If you please try to use punkbuster as search mode client in any search engine and you will find several tips on does not work/client punkbuster. Because of this I really do not think that it has something to do with the Toshiba laptop.

  To be honest, your question is for the support of Activision.

• VISA lib parallel query the former instrument 488

  I looked around to see if there is an answer for this, but I can't seem to find. I want to use the VISA library to communicate with an Amplitude of Phase Scientific Atlanta 1780 receiver, and I need to be able to read the status byte parallel survey (a special status byte is made available only through parallel survey, not poll serial). I was not able to find a function in the VISA library that can do. Is there a function I am missing, or is there another way to do it?

  Thank you

  Victor

  Documentation so that it should have been included when you installed the driver NOR-488. 2.

  Because, in my experience, the parallel survey is rarely used, very low level function, it is possible that it does not have visa. Conversion to series survey to see your instrument is a possible workaround.

• Setting up Port Forwarding on both routers E2000 for the Slingbox PRO - HD

  I bought recently a Slingbox PRO - HD and the software of the iPad in HD mode on my iPad when I'm away from home.  When I install the Slingbox using their setup program web-based, he pointed out that I don't have my network configured to optimize performance for the visualization of the internet, which is what I need for the iPad.  I think that I don't have the port forwarding for port 5001 set up properly on my system.  I can connect successfully to my Slingbox away from home on my iPad and my laptop, but the performance is indeed poor.

  I have a modem cable and two routers E2000.  The first E2000 is connected to a modem cable into my home office and the second E2000 is in my home theater.  I used Cisco Connect on separate computers to configure two routers.  Here are the details:

  Cable modem:
  Scientific Atlanta
  Model DPX2203 series
  Part number 4006351
  "Ethernet" connected to the "Internet" Router 1 connection.

  Router 1:
  Cisco Linksys
  Model E2000
  IP 192.168.1.1
  Wireless enabled.
  'Internet' connected to the modem cable.
  Connections 'Ethernet ':
  1 Seagate drive network storage
  2 desktop PC
  3 desktop PC
  4. the Router 2

  Router 2:
  Cisco Linksys
  Model E2000
  IP 192.168.2.1
  Wireless enabled
  'Internet' connected Router 1 "Ethernet 4'.
  Connections 'Ethernet ':
  1 Slingbox PRO - HD
  2 desktop PC
  3 A / V Receiver
  4 Blu - ray player

  How to configure the port forwarding for Slingbox PRO - HD on port 5001?  Also, what is the best way to configure two routers E2000 so that I can use as wireless access points?

  Thanks in advance for your suggestions.

  I would recommend using the second E2000 as an access point only. Which simplifies and facilitates also the transmission much:

  0 unplug the E2000 second the first. Connect a computer to the second E2000. Open the web interface to http://192.168.2.1/
  1. change the address LAN IP of the second E2000 to 192.168.2.1. on 192.168.1.2.
  2. turn off the DHCP server on the same page.
  3. save the settings.
  4. disconnect the computer and son, one of the LAN ports of the second E2000 for the first E2000.

  For other ports LAN to get an ethernet switch.

  Now, all you have to do is to set up the port forwarding on the first E2000.

• New Internet Service, do I need to reset the router E2500?

  I had used temporarily my router E2500 to work with a wireless broadband source by connecting it to a Cradlepoint CTR500.

  Now I will connect the E2500 to run (and ongoing) with Time Warner Roadrunner using a modem cable Scientific Atlanta WebSTAR DCP 2100. Given that I'm changing the source of the internet, do I need to reset the E2500 to factury default values, and then perform a new installation using the Cisco Connect software?

  The cable modem is currenlty connected via an ethernet straight cable to the PC. I had read that remove the ethernet connection and the cable from the cable modem and the modem powered off for 10 minutes will cause the modem to "forget" the PC's MAC address.  Once connect it MAC address of the PC had been "forgotten", the ethernet cable from the modem to the router, which make the modem pick up the router's MAC address and eliminate the need to clone the MAC address of the PC. Does this sound correct?

  Unplug the power to the modem cable for 30 seconds should be good enough. In regards to the router, you should be able to get without a reset, if it is set to DHCP for the type of internet connection.

• EA3500 not detected during installation

  I had a router (EA3500) wifi linksys n750 chip to use with a scientific atlanta cable modem. Initially, I tried to set up on my girlfriends laptop but because the installation program REQUIRES wifi, she didn't. (the wifi on this laptop is down). He got up to 85% filled including having put in place the SSID and password. but failed to set up the internet connection. So I tried to put up with my laptop instead. I unplugged the modem and router for more than 5 minutes each, and then began the installation program. It reaches 25% and then asked to not be able to detect a linksys router. However, I checked my taskbar, and he said that I was connected to the router under the SSID I had put in place previously. So I tried the option "I have configured my router and want to connect to it", I entered the SSID and the PW, but still he could not connect. I used the reset button on the router for if all right to restore it to factory settings. Now when I try to install it doesn't have the SSID tthat had already together (the router is now identified as "Cisco 00259" or something like that), but it still fails to 25%. He also said that it cannot detect a linksys router. What is going on. I know that the Wifi is working on this laptop. I cycled the modem and the router enough times to be sure that is not the problem. How to spend it?

  Error code: 0x82BF010F
  Error description: No Linksys Router wireless networks were found.
  Model name: EA3500
  Model description: unknown
  Serial number: unknown
  Firmware version: unknown
  Operating system: Windows XP SP 3
  Software version: 2.0.14294.0
  Connection type (WAN): unknown
  IP address (LAN): 192.168.1.1
  IP address (WAN): unknown
  Computer IP address: 192.168.1.146
  

  The Setup program requires no wifi. Connect to the router with an ethernet cable and try again. If installation does not try to connect to the router with a browser to 192.168.1.1 and configure manually. The password will be "admin" without the quotes.

• EPC2203 modem cannot connect to the Mac via USB?

  I searched all threads and you can't find something to solve my problem.

  My ISP sold me the modem Scientific Atlanta EPC2203 cable recently. I can't connect it to my Mac (10.5.7) via ethernet no problem at all. But I can't get a connection via a USB port. The modem operating manual mentions for Mac OS X USB connectivity, but does mention all the details on how to establish the connection: we talk about the installation of PC drivers. Supplied with the modem installation CD only applies to the PC, it seems that I have to take extra steps such as installing a Mac driver? I couldn't find the Mac drivers adapted on internet, then I start to think that this modem is not simply done to connect to the Mac via USB?

  Any help is very appreciated.

  To make your Modem work with USB connectivity, you must install the Modem drivers on your computer. You can try to search for the Drivers that works on the MAC computer or else you can contact the support Tech Atlanta, because they can let you know where you can find the drivers for your Modem. Or well you googled around and you can find the drivers for your Modem which are Compitable MAC.

• WRT54G2 disconnects every 5-7 hours or more...

  I have the WRT54G2 connected to a cable modem 2203 Scientific Atlanta on a 8MB cable connection. The WRT54G2 is wired 2 PCs and use wireless on a 3rd PC. I used the Setup Wizard to install the WRTG54G2, also using Network Magic Pro. All values are default, and I am using WPA2 security and helped the network Network Magic Pro lock. I recently updated the firmware of 1.0.03. After the upgrade of the firmware I have reset the router to the factory settings (through the interface of the browser and the back of the router itself). When I did the reset of the router itself, all computers where power off and disconnect all cables. I reconnected everything, booted up and re-configured the WRT54G2 from scratch. Everything works fine. The problem is that the WRT54G2 disconnects (without any reason) the modem cable every 5-7 hours or more. None of the PC can access the Internet, and I need to turn off the router, wait 10 to 15 seconds, then turn it back on. Everything is fine. Is this normal? What can I do in order to have an internet connection without interruption?

  The router is in line with the modem for over 48 hours now. I'll assume cloning address MAC did the trick. See the link above.

• Problem changing channels in Windows 7 Media Center

  My Windows XP Media Center 2005 machine had a hard drive crash, and so I just replaced with a Windows 7 machine, also with a TV tuner.

  Old set up has worked perfectly, blaster/transmitter infrared has been able to control the cable box - Scientific Atlanta Explorer 2200 to Comcast.

  Set up the new machine, also with the IR Blaster.  New machine can change the channel correctly in 'Live TV'.  It works by pressing a channel upward / channel down, or entering the channel number.

  But when machine is trying to change the channel to start a new record, or jump off the Media Center Guide, it shows that the first digit, and then displays the cable box '? "and does not change the channel.  So I think it's something that the decoder does not correctly or correctly, interpret or Windows has problems, change the signal.

  I have experimented with different requirements of speed of IR and whether or not he must enter/OK but have not been able to make it work.

  Thoughts of what he must try or change then?

  Thanks for any help.

  Update on my original post.  I "think" I have success.  I am now able to change the channel using the guide and the system can change the channel while recording in the background.

  I went from the Scientific American cable on a 'Digital Transport adapter"box that Comcast sent me.  The manufacturer of the box is listed as "Made in China for Technicolor", and is the model number: DCI105COM1.  The box is extremely

  For the settings, I had to use: 3 digits, enter the channel number and the speed of the middle.

  Let's give it a few weeks and see how it works and if there are differences in quality.

• Cast/EMR integration documentation?

  According to the course of 3 days I became the 'expert' DMS in my organization and Tuesday have to go and set up the cast for someone who has 27 4400 DMP (without remote controls - AWESOME), six 2200 DME and 27 1100 DME.  The thing that that concerns me most is the customer willing to listen to a variety of channels to its DirecTV receivers through his 2200 s in a variety of channels set up through cast.  Unless there is a better way to do it.  Is particularly concerned about the fact that it seems the 2200 s have only 2 entries per encoder and those are composite or s-video or SDI (doc Ref here http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps7063/data_sheet_c78-504500.html table 2) Cisco allegedly put the nomenclature together so surely there was a plan.  Given that I've never done an implementation of the large-scale distribution - I have no idea what the plan is / was.

  I understand how to establish a relationship between the DMM and DME (although our DMM is a non - UCS VM installed for training and there is apparently a few problem with MED and the DMM in this scenario - whatever it is, I only know how * theoretically * implemented).

  So my most important question about the melting is - given this equipment list - can someone deboning a SHOT of him?  Important issues are also - suppose that direcTV output is composite or I can modulate - and I use the EZ-stream interface to start encoding the signal in a digital stream - what will happen?  Is the stream should be sent to their Windows 2008r2 server before be mapped as a distribution channel?  I may have been taught - but remember - the EZ-Stream generated can be mapped directly to a distribution channel?  Or when the DME/DMM relationship is created - streams are mapped to group mcast addresses as they seek to push these channels in real time?  So far I found only-sheets techniques, brochures and information products specific configuraiton - no documentation integration.

  The last two concerns I have about the cast are - without a single remote control - I'll need a xml/web page script (installed on an ip phone or a URL) to control the cast function, once the configuration has been pushed to the DMP.  My memory is that Cisco is not a standard: one in the class, we used was absolutely terrible. Can someone point me to a resource like that?

  My last concern is its completely ridiculous regardless of the true answer - the client I install this for is adamant that the DMP is ONLY for digital signage and the 1100 s are for the delivery of its installation of Cast on each site.  Unless I've misunderstood completely the function of the coders or the DMP, this MUST be incorrect.  I am 99.999% certain all 1100 s are capable of encoding is to NOT decode or management of channels or what anyone and I know I pushed the cast configuration, we have in our lab to the DPM - what is my first rodeo - I need to be ABSOLUTELY SURE that there is not some sort of intent here between the 27 encoders and Cast - anyone know?

  I have other questions - as is at - it a recovery procedure of pw admin and root for DMM?  But I need to get my casting situation recovered.  Thanks for any input.

  DME 2200 will make two channels, the DME 1100 will be 1 channel. In addition, the DPM will not play a live stream WMV - only on videos in one request. WMV format.

  The main purpose of DME is to stream to see the and part NOT signs/Cast.

  You will need other encoders for this. You can watch the most recent acquisition of Cisco (Inlet). They have some very nice encoders. You can also use the scientific atlanta train for this purpose.

  You're right about the encoders - they only encode the stream. They are basically taking a stream video and converted into a format that can be sent to your Ethernet network. It then takes a decoder to convert video for display.

  Regarding the recovery of password, use the PWADMIN account and you can change the password.

  I go back to the Cisco team, and check out what they understand the conditions to be. Cast is perhaps not really the solution they were looking at. Maybe they wanted to video streams on PC and LCD screen just for signalling.

• DMS reading 5.2 and direct power on the DMP

  Hi all

  Is it possible to play a live (e.g. from a DME) stream directly to the DMP through digital signs?

  Thank you.

  The DME supports the following formats of live-streaming:

  -Microsoft Windows Media

  MPEG-4/H.264

  The Cisco 4400 G Digital media player integrates with the Cisco Digital Media Manager to offer:

  Support of the video codec based on standards with MP3 and MPEG - 4 Part 10, MPEG1 and MPEG2, audio, all delivered in MPEG-2 TS in UDP (User Datagram) or RTP over RTSP (RTP over TCP) Protocol in both and high-definition standard (SD and HD, respectively) formats

  The key here is MPEG-2 TS.  The DME encoders do not do this.

  Options:

  -Buy an encoder (IE. Scientific Atlanta) that supports MPEG-2 TS.

  -Use a transcoder to INGEST will allow it Windows since DME media and

  Transcode Live of WMV to MPEG-2 TS Stream flow.

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

• How let labview to check the string is in Scientific Notation.

  Hey all,.

  I want to labview to convert a worksheet string in a table. It's easy using the tool 'chain of worksheet to the table '. The only problem I have is that I get the string from a RS232 device and the critical moment arrives.

  Example:

  If I read the data from the buffer it gives me:

  1.50337800E + 00 + 1.70316300E + 00 for both channels, it is converted and accepted

  If there is a slight delay, I get:

  + 1.50337800E + 00 + 1.70316

  It is also accepted because + 1.70316 is also recognized as a number.

  How can program labview to check each number he reads is according to Scientific Notation?

  Thank you

  This regex seems to work for me, for all cases, I've tried:

  [+/-]\d+\.\d+[Ee][+/-]\d+

  Note that it is very restrictive and only follows the shape of ±n.nnnE±mm

• lsdaq does not list my PXI-6289 (Scientific Linux 5.5)

  Hi, I'm new to both NOR and Linux, but I just got to get our (PXI-6289) M Series DAQ to work. The computer running Scientific Linux 5.5 and DAQmx both DAQmx Base already installed. It is connected to the chassis PXI-1036-controller PXI-8336.

  But lsdaq can't find anything:

  $ lsdaq
  --------------------------------
  Detect of National Instruments DAQ devices
  Find the following materials:
  --------------------------------

  Even if everything seems connected otherwise:

  # nilsdev
  OR PXI-6289: "Dev1".
  OR PXI-6289: "Dev3" [absent]
  OR PXI-6289: 'PXI1Slot6' [absent]

  # nipxiconfig-l

  List of identifications:

  Frame 1 (PXI-1036)
  Slot 1: PXI - MXI-4 kit
  Slot 5: PXI-6289 (PXI5::12:INSTR)

  Any ideas on what I might try next? Any other information that might be useful for me to post?

  Thank you!

  Hello world

  I would like to clarify some things in case there was any confusion.

  DAQmx 8.0.1 was released for Linux [1], but my recommendation for the PXI-6289 is to use DAQmx 8.0.2 [2] and not DAQmx Base (the latest version is now 3.6 [3]). Both DAQmx 8.0.2 and DAQmx 3.6 support the 6289, but DAQmx offers better performance and exposes the full set of features of the material. DAQmx Base performs all types of measure, but does not implement the less popular features (like the trigger delay, delay clock sample, routing subsystem, etc.). The best time to use DAQmx Base on Linux is hardware DAQ USB because it is the only rider OR that supports these devices.

  Finally, about the release of the list: ask the command nilsdev DAQmx what material he has under his control and lsdaq done the same for DAQmx Base. As with any OS, that a driver can associate with each device and DAQmx will anticipate DAQmx Base when enumering devices since it has full support for hardware. Thus, nilsdev seen the 6259 since DAQmx had taken possession and lsdaq reported nothing since there is no connected USB devices.

  [1] NEITHER DAQmx 8.0.1 for Linux
  http://Joule.NI.com/nidu/CDs/view/p/ID/1194/lang/en

  [2] NEITHER DAQmx 8.0.2 for Linux
  http://Joule.NI.com/nidu/CDs/view/p/ID/2322/lang/en

  [2] NEITHER DAQmx Base 3.6 for Linux
  http://Joule.NI.com/nidu/CDs/view/p/ID/3434/lang/en