EA3500 not detected during installation

Similar Questions

• Local storage not detected during installation

  Just got some new guests to, HP DL380 G7s... Using Smart Array P410i controller.

  When I boot on the CD to begin the installation, it is only to see my CF storage, none of my local storage.

  • Physically, there are two 146 GB drives in raid 1 + 0.  Of these 2 physical disks, there is a logical drive in RAID 1 + 0.  After that he did not detect the storage, I deleted the logical drive and recreated, with no change in the result.
    
  • BIOS is configured to use the first SA P410i controller.
    
  • HIS P410i appears in the VMware HCL for each version of 3.5 to 5 U2.
    
  • Am in the process of the firmware released May 5, 2011 download, but these servers came pre-assembled with a burn-in already made, and I guess the firmware is already aware of this latest version - will certainly know when download ends.
    

  I'm obviously doing something ridiculous and stupid, but I don't see what I'm doing wrong.

  It's basically not much you can do wrong and what you write on the configuration of the RAID that everything should be good. Can you confirm that the logical volume is detected by the RAID controller during startup?

  When you install ESXI volume - although local - probably will see the place under the remote storage. You can also confirm that it is not at all clear?

  André

• NB100 - 11G - HARD drive not detected during installation of Windows XP

  I have a Toshiba NB100 - 11G with Win XP Home and a 160 GB HD RAM upgraded 1 024 to 2 GB. Recently, I tried to install Win Pro SP3. However, it did not work and the message was that the hard drive was not recognized. I have no problem restoring with the provided Toshiba Recovery CD (which has Win XP Home).

  Does anyone have an idea why I couldn't install Win XP Pro? Could it be related to my RAM upgrade? (The only thing I changed.)

  Thanks for a response. Sincerely, Allan.

  Hello

  The problem is that you integrate the driver SATA Windows XP can detect the internal HARD drive. Otherwise, you get a blue screen or the HARD drive is not detected.

  With the help of nLite (freeware tool), you can create a new drive to install XP with SATA driver package. This is described here:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  If you have any other questions, you can also see similar forum topics. You can find hundreds of threads here in the forum about it.

• Photosmart Premium C309G not detected during installation with wired network connection on Win 7 64 bit

  During the installation of the drivers and software on Windows 7 Home Premium 64-bit computer laptop, (previously upgraded from Vista), the installation software can't find the Photosmart Premium C309G, even if I provide IP address, that is on the same subnet. Same printer installed on three other computers on the same network for Windows XP. It is possible to find via windows 7 Add Printer function by using the appropriate base driver, but then if I try to print, it cannot print the test page, printing garbage, after much time and erases never status "printing" in the queue until I manually cancel. There is an Ethernet cable on the home network.

  The first thing to check is your firewall.  Disable the Windows Firewall and the firewall of your security system and try the installation again.

  If you had this printer installed on Vista, you can simply add this patch.  It's only for the patch software Vista works on Win 7, so if this is not the case, do not take into account.

• Visual Studio Express from 2012 for Web not detected during installation.

  I installed Visual Studio Express 2012 for the Web and need to install the Oracle for Visual Studio development tools, but when I run the Setup ODT, it captures any installation of visual studio.
  
  Is there a work around for this issue, or should I change to a different version of Visual Studio?

  Hello

  You will need to install a full version of Visual Studio. By the readme:

  http://www.Oracle.com/technetwork/topics/dotnet/downloads/install112030-1440546.html
  
  Note: The Visual Studio Express editions are not supported with Oracle development tools. However, ODP.NET is supported with Visual Studio Express Edition.
  

  So, you can still use the things ODP and code "manually" to access the database, but the Oracle development tools will not work.

  Greg

• Tecra S3 - HDD was not detected during the intallation of win7

  Hello

  I have Tecra S3 PTS30E, serial No. is 17023153 H.

  Now installed windows xp, I want to install Win7, but the HARD drive is not detected during installation. Windows xp works with this HARD drive.

  Why this problem?

  Please help me on this problem.

  Hello

  Tecra S3 supports RAID. Therefore, you need to install the RAID driver
  When installing XP, you will need to press F6 to add the RAID driver.

  Here the driver I found on the page of the European driver Toshiba

  [Driver RAID Tecra S3 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 195 & selSeries = 335 & selProduct = 596 & STAS hortMod = 431 & language = 13 & selOS = 10 & selType = 262 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 262 & page = 1 & ID = 43966 & OSI D = 10 & driverLanguage = 42]

• HP LaserJet P1102: USB not recognized during installation of HP LaserJet P1102

  I have a Sony Vaio VPCEH computer laptop with Windows 7 and when I run the disk I got with the printer on my laptop, that the installation procedure works in what concerns the section "Install printer Software". When you are prompted to turn on the printer and connect the cable USB to the laptop it says 'USB not recognized '.  I tried all 4 slots USB into my laptop but the USB still appears as an unknown device with an exclamation point in a yellow triangle. I searched internet solutions and tried to uninstall the unknown device in Device Manager and restart the installation with the disc, I also tried clicking on the unknown device driver software update but it says the software driver is up to date and still, it shows as an unknown device and is not recognized. I also tried to uninstall the HP software from the disc on my laptop and that reinstall but nothing has worked. I felt for over 2 weeks now and have not been able to use it because of this problem and I really need for University, so I would be very happy if someone could please give me a solution to this problem

  Hi @Janemaguire,

  Have you tried another USB cable?

  Because the printer is not detected on the Mac, it may be the USB port of the printer.

  What happened when you tried to install the printer on Mac?

  Error messages?

  What is the model Laserjet P1102w?

  Let me know. Thank you.

• VMNet1 and VMNet8 were not created during installation

  Hello

  I installed VMWare Player 4.0.4 on a 64-bit Windows 7 host.

  I use XUbuntu 11.10 as the guest operating system, and in the settings of the virtual machine, the network is configured for NAT.

  I run a Web server on the guest in port 3020 operating system and I'm unable to connect from a browser, I opened in windows.

  In the browser, navigate to: http://192.168.132.128:3020 / where 192.168.132.128 is the ip address of comments as indicated by/sbin/ifconfig.

  I suspect that the problem is the fact that I don't have an adapter VMNet1 and VMNet8.

  In some ways, they were not created during the installation.

  How to re-install these adapters?

  Thanks in advance,

  Ido

  • At the changes I made (the address of ip subnet of 10.0.0.0 vmnet8 and vmnet8 IP gateway for 10.0.0.138 chaning) correct?

  If the physical LAN subnet use 10.0.0.0 then no VMnet8 change to this subnet is bad.  It is also wrong to affecting also the VMnet gateway IP address in the same IP as physical LAN Gateway IP address.  The local physical network and VMnet8 (NAT) are supposed to be completely distinct and different from the IP addresses, the subnet mask, gateway IP address, etc.   Use the restore default in the virtual network Editor to fix your incorrect configurations.

  • Should I just the adapter VMNet8 if I use NAT? (currently in the "Network Sharing Center" I have LAN and VMNet8)

  If you try to run a Web server in a Virtual Machine and you want to be able to access if the host beyond and you have a physical router that the host is connected to then assign just NIC of the virtual machine that is connected by a bridge and it will be a counterpart on the physical LAN.  Also in the virtual network editor change VMnet0 auto to a specific host NIC as the automatic bypass does not always work correctly.

  • Is there something I can do to solve the speed problems I experience in the guest operating system?

  I would like to start using the button restore default in the virtual network and then editor change change VMnet0 from auto to a specific host NIC and then the value of the Network Adapter to the Virtual Machine, connected by a bridge.   (Bridged using guess your able to do so)

  If you use NAT then do with it properly configured and that you use Port Forwarding as necessary in the virtual network for VMnet8 Editor.

  ==========

  As well as your using VMware Player, however, read Chapter 5, setting up the network connections, by Using VMware Workstation in order to have a better understanding of the Infrastructure virtual VMware.  (Note: not everything in Chapter 5 will apply to VMware Player.)

• Support for the NETWORK card not detected during Setup

  I try to install vSphere Hypervisor 6.0.  He said there was no detected network devices.  I found the NETWORK provider interface card and ID of device in ESXi console.  I then found his page in the VMware Compatibility Guide. The page indicates 6.0 is supported and this is the Inbox.  No idea what could be causing this error?

  Edit: I can't seem to get the hyperlink in this text editor, I can not paste links.  So, here's a screenshot of the page of network cards

  

  Ah, what is more likely is that 6.0 does not have the appropriate drivers for the game chips and bus system so it does not detect the network interface cards because it does not actually detect parts of the motherboard.

  There were a lot of older drivers removed in 6.0 which enabled 5.5 and below to work on the server not hardware. You the best solution is to install vmware workstation and install it inside the workstation for testing.

• Equium U400-145 - HARD drive not detected during XP installation

  I am trying to install XP on a new HDD on my Equim U400-145.

  However, during the installation of XP it says that the installation program "found no hard drives installed on your computer.

  The HARD drive is seen in BIOS and I checked in another system, and it works fine.

  Anyone can shed some light?

  Before installing Windows XP, you need the Intel Storage Manager. All other drivers and tools, you need only after installation.

  I think that you should only read hundreds of discussions here in the forum and check this Toshiba of the area of the FAQ document:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Good luck!

• Solution: The USB floppy drive is not recognized during installation of XP of RAID

  Hello

  This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

  I found the Solution to this problem,

  [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
  requires a driver during the installation, the USB floppy drive is not recognized in all
  installation. When Windows XP searches the driver of the second time, he will not be able to see
  the floppy USB drive drive and prompts the user for the driver (RAID) again.
  The installation will never reach this point. ]

  Solution:

  This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

  Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
  Also note the back of drive sometimes they write (no bootable) avoid this also

  I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
  P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

  The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

  Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

  Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

  USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

  USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

  USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

  The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

  USB\VID_03F0 & PID_2001; HP
  USB\VID_054C & PID_002C; Sony
  USB\VID_057B & PID_0001; YEData
  USB\VID_0409 & PID_0040; NEC
  USB\VID_0424 & PID_0FDC; SMSC

  If you want manual of Installation of Windows Xp Media Center Edition 2005
  then check out my discussion here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

  Thank you for the very interesting topic.
  I think that it s an enemy of information all of you who have the same problem.

  Thanks ;)

• LaserJet Pro P1102w installation problems - USB not recognized during installation

  Struggling to configure the P1102w - using the installation DVD that accompanies it, I go through the steps. When I get to ' turn on the printer, connect the USB cable to the computer ' the printer is not recognized. Is not dismiss it, he just can't get it - it is with Windows 8.1.

  Tried it on another laptop running Windows 7 - same problem. The installer sat on the market "in waiting to connect to the printer via the USB port.  When you connect, Windows recognizes a USB device and tried to install the device - came with an error that could not be recognized and need to contact the manufacturer for the installation files.

  Update Windows, computer rebooted several times, deleted the HP installation files and tried with drivers downloaded from HP website - same problem.

  Any ideas?

  I had the same problem when working on a clients computer.

  (1) it has been infected by viruses, so we had to make a Virus removal on his computer.

  So you want to make sure that your computer is virus-free

  (2) in most Windows 8 HP computers in particular, drivers automatically installs on the computer.

  Check your device manager and click on printers. It will show what is connected.

  On my computer it shows printers >

  HP P1102W

  I had to uninstall it, to install the software. Once I did that the computer was able to recognize the USB cable.

• HP OfficeJet Pro 6968: Printer is not found during installation

  I downloaded the HP Easy Start, and he could not find the printer. My computer and my printer are connected to the same network. The printer is set up and the wireless connection is on.

  Download and read the User Guide on the website of HP here.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6960-all-in-one-printer-series/8289579/model/11161242/manuals

  Learn about how to connect wireless.   It's your complete for installation troubleshooting and all support site.

• License agreements don't is not displayed during installation

  I created and installer in LabVIEW 2011 (64-bit OS with Windows 7).  I added an agreement (rtf) license to my Installer file and it included as indicated below.

  

  The setup.ini file includes a reference to the file and I confirmed that the file exists in the license folder:

  

  

  When I test the installer on my development PC or PC target, my custom license agreement does not display.  I have enabled boxes in the setup.ini file to display the standard EULA of NEITHER, but that will not be displayed.

  My setup.exe file is dated from 21/06/2011.  I checked the previous installers who worked properly and setup.ini files looked like but the setup.exe is dated 01/09/2010.

  All advice is appreciated...

  Hi, SJT,.

  It seems that it is a known problem when using LabVIEW 2011 on Windows XP.

  The suggested workaround is to open the setup.ini of the distribution of construction MDF (Installer) file and rename the section [LicenseTypes] [LicenseTypesX]. Note that you must rename the [LicenseTypes] section, do not LicenseTypeN where N is a number.

  -Nathaniel

• hard drive is not recognized during installation of window

  Hi all

  I recently had some problems with my computer so I decided to erase and install a new OS on it. Initially I had window on my main hard drive, but that is old and broken so I who throw in the trash, and my secondary hard drive (Seagate Barracuda 7200.12) now will be my main for this installation of Windows vista x 64.
  Problem: when I get to the part in order to select the player for window to install on, window does not show that the disc is read, and the driver must be installed.
  I've never had this problem before. so I went into the bios when booting and bios, I see this window is grateful for my hard drive, but for some reason, it does not show when I do installation...
  Help, please...
  Thanks in advance

  Hi tuanhuynh,

  It seems that the Serial ATA driver could not be installed on your computer.

  See the following link and install the Serial ATA driver.

  Install or remove a hard drive

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=200991

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=212667&NewLang=en

  If you have trouble with the Serial ATA driver installation then I suggest you to contact the manufacturer of the system for further assistance.