Scratch the disk paths do not stick.

Similar Questions

• The shortcut error message: the specified path is not; Maybe reinstall Firefox whenever I want to use.

  When I install Firefox, it works very well. Installation does not include a shortcut on my desktop, then when I try to start it again, I go to "all programs." Next, I get the message "the specified path does not exist. I think it has something to do with the confusion between two hard disks. C: drive, a small SSD, contains the operating system and other software. D: drive is my data disc, contains other applications, photos, music, etc. The way referred to in the error message is D:\Program Files (x 86) \Mozilla Firefox\firefox.exe.

  Firefox does not have the ability to choose a disk for installation. Is it possible that it is automatically installed on the C: drive, the shortcut continues to send on the D: drive?

  If you have any ideas or suggestions, I'd like to hear them.

  Using your file browser, look for Firefox in c:\Program Files (x 86)
  After, look in other files of the program (x 86)

  Once you find it, click with the right button on Firefox.exe and create a shortcut.
  Move it to your desktop. It work?

  Note: In the creation of shortcuts, you can without spaces. Instead of use;
  c:\Program Files (x 86), you should use; "c:\Program Files (x 86)".

• Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

  I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

  I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

  I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

  The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

  I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

  The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

  SOLUTION

  It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

  There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

  (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

  (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

  If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

  The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

  That's all.

• You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

• Script to add a domain user to the local Administrators group raises the error "the network path is not found."

  I have a Windows Server 2008 R2 domain and a Windows XP Pro workstation that has been attached to the domain and then disconnected. I am trying to create a VBS script to add a domain user to the local Administrators group.

  I log on my computer as a local administrator and run the following script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim OUser: Set oUser = GetObject ("WinNT://domainname/username")
  oGroup.Add (oUser.ADsPath)

  This script returns the error "the network path is not found."

  However, I am able to go into control panel > user accounts > enter the user name and the domain name > click Next... > choose the administrators of the 'other' group and the user name will be added to the local Admin group.

  The same script runs without error if it is launched after logon on the workstation with a domain administrator account.

  How can I get my script runs without error, when you are logged into the workstation as a local administrator?

  Best regards, Andy

  The code that I used came from here. If the syntax of the Add method is passed to oUser.ADsPAth to "WinNT: / /" & domainname & "/" & username, the script works correctly.

  Therefore, the modified script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim strUser: strUser = "WinNT://domainname/username."
  oGroup.Add strUser

  Thanks to Qasim Zaidi to show the code of work here.

  Best regards, Andy

• Windows Defender: the specified path does not exist.

  What happens if when I have on windows defender, he said

  C: / Program Files/Windows Defender/MSASCui.exe
  the specified path does not exist.
  Check the path and then try again.

  Hello

  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Right click on your icon - properties - Shortcut tab and compare your configuration to the one above.

  This is the equivalent of:

  ' C:\Program Files\Windows Defender\MSASCui.exe "'

  Note the space before the P and the / slashes in your. Rob - bicycle - Mark Twain said it is good.

• Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

  Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

  error message for a memory card has it printed

  Hello

  ·        Have you been able to print from memory card sooner?

  ·        How are you connected to the computer from which you are trying to print?

  This occurs when a computer uses the network map to connect to another computer to share files.

  To fix this problem, do one or more of the following methods.

   

  Method 1: Control equipment

  (a) ensure that the computer with file sharing turned on.

  (b) ensure that a hub network or router is powered.

  (c) ensure that the cables are well connected.

  If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

  Method 2: Ensure that network resources are properly shared

  Share a folder on a drive, then connect to the shared drive, follow these steps.

  Step 1:

  To make a folder that is located on the accessible hard drive on another computer, follow these steps.

  (a) right click onStart and then click Explorer .

  (b) right click on the folder you want to share, clickshare , and then click share this folder .

  Step 2:

  To connect to the shared folder from another computer, follow the steps below.

  (a) clickStart , then click run .

  (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

  (c) clickOK .

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Somehow, I lost all my windows games. "C:\Program Files\Microsoft Games\Minesweeper (I got just to click on this game) \Minesweeper.exe the specified path does not exist."

  Hello

  Somehow, I lost all my windows games.  I have Windows Vista Home Premium; Internet Exployer 9 & Service Pack 2.  I don't know if you need any information Add ' l to answer my question.  But if anyone can help me, I'll be very grateful.

  I'm not at all computer literate.  So if you answer me, please give me for exact directions.

  I already watched: Control Panel; Programs of devices &; and the box is checked for the 'games '.  I also clicked on the word 'Games' and all games can up and they are all checked.

  When I try to access the games, I get this message:

  C:\Program Files\Microsoft Games\Minesweeper (I got just to click on this game) \Minesweeper.exe the specified path does not exist.  Check the path and try again.  (But I don't know how to check the path!  Can someone help me?

  Thank you, b.

  C:\Program Files\Microsoft Games\Minesweeper (I got just to click on this game) \Minesweeper.exe the specified path does not exist.  Check the path and try again.

  What do you get the message above? You try to put a tick in the box empty for Minesweeper in Windows turn features on or off?

  If you uncheck the box for games, click OK, restart your PC, then check the box for games, press OK and restart again, what happens?

  Is it one bought for PC & that you own, or is it a PC belonging to the company?

• When I try to open a game (Chess Titans, inkball, etc.), I get the following message: "c:\Program Files\Microsoft Games\Chess\Chess.exe the specified path does not exist.

  When I try to open a game (Chess Titans, inkball, etc.), I get the following message: "c:\Program Files\Microsoft Games\Chess\Chess.exe the specified path does not exist.  Check the path and then try again. "Should I do to get my games back so I can play them?  I've tried enabling/disabling of Windows features, but it did nothing.  I also tried to go through the run, but that has not worked.  And, I tried command prompt, but it says that I am not the administrator, who I am.

  Not accessible games

  I haven't had any changes consciously, and the games do not work in any user account.  When I've done sfc/scannow (command prompt) he said that I was not the administrator.  I could learn from another source to solve this problem - in the start menu, right click on the command prompt icon, and then click Run as administrator.  Hope everybody help with this problem.  If you do not have command prompt in your Start menu, any type of command prompt in your search box and it should appear.

  Anyway, my games work now.  Thank you

• Error code: 0 x 80070035 the network path was not found.

  Hi all

  I have 2 systems. In one system, I installed Windows XP Pro SP2 and in another machine I installed Windows Vista Home Basic Edition. The two systems are networked. I am able to access and view the shared folder in Vista the XP system. But when I am trying to access folders in XP since Vista I get the below error:
  Windows cannot access \\hyd02
  Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.
  Error code: 0 x 80070035 the network path was not found.
  
  
  I did the settings below:
  (1) file and printer sharing are enabled in both systems.
  (2) firewall is disabled in the systems.
  (3) in the center of security and network, the network is private.
  and network discovery is enabled, file sharing is enabled, public folder sharing is turned on, printer sharing are enabled and protected by password sharing is
  Off, media sharing turned OFF.
  (4) the name of the task force in both the system is the same.
  Can someone help me solve this error...
  Thank you
  Sylvie G

  Hi Sylvie G

  Thanks for posting on Microsoft Answers.

  Are the same username and password on both systems?
  What is the share name you are trying to do on the XP machine?
  Let's say that the share name is music, you would get to it by typing \\hyd02\music

  Can you do a Test PING since the Vista PC on the XP PC?
  Go to a command prompt and type ping followed by the IP address of the computer XP

  Please post back the results... Thank you Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• An error occored while reconnecting to Z: at \\BRENLEEBOLIN\Public. Microsoft Windows network: the network path was not found. This connection has not been restored,

  A can not access my respect (z), on my Microsoft Windows network, the network path is not found, the connection has not been restored.

  The PC called BrenLeeBolin is actually shot?  It is physically on the network?  Can you go to the BrenLeeBolin PC and see if the Z:\ drive is actually still there and readable / write?

• network error 0 x 80070035 that the network path was not found.

  I have problem of network with Win7 pro. When I click on my network folder links to my LAN I geterror 0 x 80070035 the network path was not found.

  The network has been set up for 4 months, it includes 3 PC, so far the only problems have been minor, such that the network links, which restart a system endangered has been necessary to update the network and worked.

  The 2 other PC can see and access each other and see and access PC Win7 Pro troubled, but troubled PC Win7 Pro can even happen to its own network without theerror records 0 x 80070035 the network path is not found, arise.

  After hours of checking, I have found no resolution, but as I restored it the PC several times, sometimes service reappearing for a while.
  In my search for possible causes, I opened the Device Manager with the selected hidden devices, under network adapters and found189 instances of card Microsoft 6to4.
  I don't have 3 PC's networked! Anyone know if it is a normal number for Win7 or I found part of an anomaly.

  Any suggestions?

  c.Maresca

  Thank you for your comments.

  In the search for a solution to my problem of network Win7 Pro, that I've been on all the settings you mentioned before that I posted my question and no problem, everything is as it is necessary to have a comprehensive network and the network was very good except the occasional missing links, which I described in my original post. The only addition to the configuration of PC from the network has been initially implemented has been automatic updates to update from Ms.

  The good news is that, as I studied it to the maximum, I found 2 messages in the network forum Win7 which combined provided the solution for my problem with the network.

  As I did research on it, I noticed that a lot of people have similar problems of network. I know that there are many reasons of connectivity issues, as well as the solutions are specific problems, but if other users of the network are affected by the problem of multiple card Microsoft 6to4 and local network error 0 x 80070035 that the network path is not found, the solution I found worked for me.

  If you want to see more respond to this stream.

  c.Maresca

• When you try to access an external drive shared by MAC from Windows, I get an error Code: 0 x 80070035 - the network path was not found

  Original title:

  I'm unable to access an external drive that I have connected to a mac on my home network.  I can access all the files on the mac itself, but when I try to connect to the external drive, windows 7 gives the error Code: 0 x 80070035 - the network path was not found.  The external drive is set to share on the Mac, but Windows 7 always gives me error.

  Hi Comicsancturn,

  Follow the troubleshooting steps in this thread to solve the error 0 x 80070035.

  Let us know if that helps.

• Error code 0 x 80070035 that the network path was not found.

  OT: error code 0 x 80070035
  My wife and I have 3 computers all running Win 7 64 bit. Two jobs and the third is a laptop. My desktop or laptop computer I can access any folder of each machine. However, when I try to click on my wife under 'Network' computer I get the message "Windows cannot access\\wife_desktop." When I click 'See details' it displays "error code 0 x 80070035. The network path was not found. "I'm running out of things to try.  I tried to use my desktop computer and notebook to help me check the installation on my wife's computer. I have updated owner and security settings in both car and system, as well as temporarily disable the firewall. Any suggestions would be greatly appreciated.

  Hello

  Method 1: Run the network troubleshooter and check out what he has to say.

  See the links below:
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters
  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Make sure network discovery is enabled on the laptop computer, by default the State network discovery is disabled. If network discovery is off, please take the following steps to turn on.

  (a) click Start.
  (b) click on Control Panel.
  (c) click on network and sharing Center.
  (d) click on the arrow to drop down next to the network discovery.
  (e) click on the option, turn on network discovery.
  (f) click on apply.
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Method 2: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off 
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  See the following link: http://social.technet.microsoft.com/Forums/nb-NO/w7itpronetworking/thread/028a3d13-f571-49e0-abe7-1ca61fb92082

• I need a copy of the invoice and by the provided path is not available

  I need a copy of the invoice and by the provided path is not available

  Hi Jander,

  Please contact the support for the same thing: contact customer service

  Kind regards

  Akshay