range of HP envy 4505 printers: printer used online print

Similar Questions

• range of HP envy 7645 printers: printer envy 7645

  I have a printer of hp Envy 7645 and off color. I want to now turn the color option and have not been able to do. Help, please.

  Hi joanne3, I would like to help you get your color work again.
  
  If you disabled color by adjusting the settings of the printer, you can learn how to set this option returns with the manual for this model here.
  
  Try clicking on Print, Scan & Fax, and then set the preferences. You can adjust your default settings here. Refer to page 28 of this manual for more information on the configuration of your default settings.
  
  I would like to know if this helps - happy to solve problems more if it's not.

• range of HP envy 5532 printers: printer will no print only pages and a half newsletter

  Hello. I try to print a copy of the draft of a newsletter, but for some reason any my printer keeps printing page 10 only and a partial print out of the other page (set up is for the spread regarding the newsletters of two pages).  I went through my editor guide and I see that everything is put in place as it should. I had no problems before with impression of the bulletin.

  Hi @bob84, thanks for the reply.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning. I recommend you to download and run the HP print and Scan Doctor If she doesn't fix it automatically Let me know what errors or messages that you receive. 

  If printing and scanning doctor will not work for you, or it does not solve the issue try this;

  1. Click Start, type Services.msc in the search box and press ENTER.

  2. double-click on the Printer Spooler in the Services list.

  3. click on stop , and then click OK.

  4. Click Start, type %WINDIR%\system32\spool\printers in the search box and press Enter, remove all files in this folder.

  5. Click Start, type Services.msc in the search box and press enter.

  6 double click on Printer Spooler from the Services list.

  7. click on start. In the Startup Type list, make sure that Automatic is selected, and then click OK.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP b209a printer range will not connect to router comcast using the WPS button

  HP b209a printer range will not connect to router comcast using the WPS button. I try to use a new Comcast router (technicolor TC8305C). When I try to connect the printer times out and says that no connections are when I check for wireless connections. Yet, when I print the network configuration page, the SSID for the new router is at the top of the list. I reinstalled the software by the support of Comcast, but it did not help.  I'm ideas please help!

  Thank you

  Never use WPS to connect.  If done it should be disabled in the router for security reasons.  Connect manually via the SSID and password following the instructions in the manual.

• are there any current HP printers that use the HP 02 print cartridges? Old printer C6180 goes wrong.

  are there any current HP printers that use the HP 02 print cartridges? Old Photosmart C6180 printer goes wrong and have a lot of cartridges.

  The Site of HP Pageyield lists the following printers compatible with 02 cartridges:

  • " HP Photosmart 8200 printer
  • " Printer HP Photosmart D7100
  • " Printer HP Photosmart D7200
  • " Printer HP Photosmart D7300
  • " Printer HP Photosmart D7400
  • " All-in-one HP Photosmart 3100 Series
  • " HP Photosmart 3200 all-in-one series
  • " All-in-one HP Photosmart 3300 series
  • " HP Photosmart C5100 all-in-one series
  • " HP Photosmart C6100 all-in-one series
  • " HP Photosmart C6200 all-in-one series
  • " HP Photosmart C7100 all-in-one series
  • " HP Photosmart C7200 all-in-One series
  • " HP Photosmart C8100 all-in-one series

  I do not believe there are all the models currently available that use cartridge 02.

  I heard that HP has (had?) a trade-in program for its intact packaging expired cartridges.  See this post for a suggestion.

• HP Envy 4505

  With the printer mode Direct wireless and I - pad info box showing who says that the job was sent to the HP Envy 4505, the job does not print. No idea what I'm doing wrong or is this a malfunction of the printer? Thank you.

  Hi @Brandyis4,

  Welcome to the Forums of HP's Support.  I understand that when I try to print using the wireless network directly from your printer 4505 Envy that you can send a job to print from your iPad, but it never seems to print.

  I have included the Apple AirPrint: The Apple Mobile Device shows work is printing but the printer does not print document.  There the troubleshooting steps to resolve the problem that you are experiencing.

  Please let me know the results.

• HP envy 7640: hp envy 7640 not print not the pictures folder

  HP envy 7640 will print if I type in Notepad and controls hit and p. The problem is when I try to print from the pictures folder, that a window for sending a fax. I can't print anything in the pictures folder.

  Hi dennistomlin,

  Thank you for your answer!

  Please, try the steps in the following order:

  • Uninstall the software.
  • Start the computer in minimum mode.
  • Disable all Antivirus programs.
  • Disable all firewall programs.
  • Create a new user account.
  • Connect to the new user account.
  • To help reinstall the full feature software and drivers.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that these measures are useful!

• HP Envy 5540: Printer Hp Envy 5540 randomly printed the Network Configuration Page

  Hello!

  I bought this printer about a month ago. Set up the connection to the printer wireless with my wifi, and my understanding is that the printer is protected like my wifi and use the same password in order to print something. I kept my printer connected and 'standby mode' since I put in place. The night last at about 23:00 when I was in bed, the printer turned on randomly and printed a "wireless network configuration page" that has had a lot of information, including the IP address and listing my name wifi as well as the names of my neighbors wifi in the surrounding apartments.

  I'm trying to understand why this printed, because I certainly did not do. Anyone have access to my wifi, or has someone may simply try to print something and selected my printer as it should appear on the "list available connections on the computer of anyone, given that the printer is turned on? How could they print this sheet of network configuration if my printer is password protected?

  I'm mostly concerned about someone who has access to my internet if they could print this page somehow, but maybe it happened just when they tried to connect to it, and it did not work while trying to fix MY printer?

  I would appreciate any idea on the issue.

  Thank you!

  Hi @printerprob5540,

  Welcome to the HP Forums!

  I saw your post on how your HP Envy 5540 randomly print a Network Configuration Page. I'm happy to help with this problem!

  I find it very strange considering the only way to print the Network Configuration Page, AFAIK, is with the following steps:

  • Make sure that there are size A4 or US Letter, unused, plain paper in the feeder.
  • On the printer Panel, drag the screen to the left and then press Setup.
  • Touch tools.
  • Drag upward on the screen and then tap Network Configuration report.
  • A Network Configuration Page prints up to three pages of information.
  Figure: Example of a Network Configuration Page

• HP Envy 4500: Repeat Printing Documents

  Hi all

  I have recently, in the last six months, plug a HP Envy 4500 series all-in-one printer as a gift for my parents. Apparently, he has a problem where it printed a document several times (despite asking only one copy) and will continue to print it whenever the printer is on.

  On my advice, my parents followed the instructions of RESUMES provided here , but it made no difference to the problem. My hunch would be to reset the printer, but of course the menu aboard is unvailable while it's printing. Someone has any advice on what to do to solve the problem?

  Many thanks in advance,

  D.

  Hi @Darius89,

  Welcome to the HP Forums!

  I see that your HP Envy 4500 continually prints an earlier document that was printed. I'm happy to discuss this issue for you!

  Just to clarify, if you leave off the computer and turn on the printer, the printer still print the same document?

  Is this document something that has been printed from the computer? Or is it an alignment page perhaps?

  In the meantime, please try a hard reset by following the instructions contained in this message, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  Hope to hear from you soon and thank you for posting!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• HP Envy 5530: Since upgrading to windows 10, my laptop cannot see my HP Envy 5530 iwireless printer

  I have upgraded to Windows 10, since then my pc can't find my HP Envy 5530 wireless printer. I downloaded some sort of doctor scanning HP according to a previous post on this forum, but it does not work and my pc cannot see my printer yet. Please can someone help? My laptop is a Levono Idepad.

  Hey @Rayprinterman,

  I see that you have some problems with printing to your craving 5530 e - all - in - one printer after upgrade to Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off.
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Close any programs you have open on your PC.
  5. In your search type in printers bar and open devices and printers.
  6. Right-click on any icon of your printer listed.
  7. Click on remove the instrument.
  8. Repeat for all other icons of your printer listed.
  9. Click Add printer, and follow the prompts to add a new queue for your printer.

  Please let me know the results after following the above. If this allows you to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Current printers that use cartridges HP 60XL

  I am looking to buy a new all-in-one printer.  I have three cartridges 60XL brand new and unopened and let me know which printers will take these cartridges.  I sent to HP, but have had no response and so I was hoping someone on the forum may be able to help me with a list of model numbers.

  Thanks in advance.

  Hello

  There are 13 products/printers that use 60 HP and HP 60XL on the following list:

  http://WWW8.HP.com/au/en/products/OAS/product-detail.html?OID=3564753#! tab = compatible_hosts

  Note: does not just in your country.

  Kind regards.

• HP Envy 4500: Cannot print with the new Wifi

  I have a new Netgear09 router and everything connected correctly. My HP Envy 4500 wireless printer has been a success with the wizard, and I printed out the specs very well. My computer (Windows Vista) is connected to the Internet fine... but when I try to print a document from the computer it continually-error. What Miss me? I am able to print from my Ipad... but not the PC.

  Welcome to the HP community @Dmk3,

  I understand that you can't print from your Windows Vista system to your desire of 4500 from the evolution of your router. I would like to help!

  Try running the print and Scan of the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Please send me the results.

  Try to print again, and if there are problems or errors, please tell me what they say precisely and I'll read them for you! Also ensure that you are trying to print outs in addition to a program.

  Best wishes to you!

  Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

• ENVY 4500: My printer ENVY 4500 guard disconnection (no WiFi)

  My ENVY 4500 guard printer disconnect sporatically. One minute I can print correctly, either the printer could not be reached. The printer status "the printer is not connected.

  This continues to be of all devices, not only my iMAC. I tried my laptop, my iPad, iPhone. Same story. When it fires, he died for all devices. I tried to reinstall the printer, tried to restart, unplug. Nothing seems to fix.

  If I print the report directly from the printer during this time, it says everything is connected and no problems found (see attached image).

  Then after awhile, like an hour or two later, all of a sudden the printer will spit on all the prints that were in the queue.

  I contacted support and they connected to the printer and reset some settings, and it started working, then a week later he did it again. She continues to do maybe once a week or more.

  I don't know what to do more. Anyone have any ideas?

  

  Hi @valiik,

  I wonder, have you tried to set a static IP address? Your HP printer static IP address assignment

  Please let me know.

• Size of partition on interval range partitioned Table happens when SYSDATE is used in a Where Clause

  We have tables interval range partitioned on a DATE, with a partition for each day column - very standard and straight out of doc Oracle.

  A 3rd party application queries the tables to find the number of rows based on the date range that is located on the column used for the partition key.

  This application uses the date range specified from the current date - i.e. for last two days would be «...» StartDate > SYSDATE-2 "- but the partition size is irrelevant and the explain command plan shows that each partition is included."

  In presenting the request uses the date in a variable partition size location and query table is obviously much better.

  DB is 11.2.0.3 on RHEL6, and default settings - i.e. nothing that could influence the behavior of the optimizer to something unusual.

  I can't work on why this would be the case. It is very easy to reproduce with cases of simple test below.

  I would be very interested to hear any views on why it's that way and if anything can be done to allow the size of the partition to work with a query including SYSDATE because it would be difficult to get the application code has changed.

  In addition to make a case to change the code, I need an explanation of why query using SYSDATE is not advisable and I know this information.

  (1) create a simple partitioned table

  CREATETABLE part_test
     (id                      NUMBER NOT NULL,
      starttime               DATE NOT NULL,
      CONSTRAINT pk_part_test PRIMARY KEY (id)) 
  PARTITION BY RANGE (starttime) INTERVAL (NUMTODSINTERVAL(1,'day')) (PARTITION p0 VALUES LESS THAN (TO_DATE('01-01-2013','DD-MM-YYYY')));
  

  (2) fill in the rows of the table 1 million distributed among 10 partitions

  BEGIN
      FOR i IN 1..1000000
      LOOP
          INSERT INTO part_test (id, starttime) VALUES (i, SYSDATE - DBMS_RANDOM.value(low => 1, high => 10));
      END LOOP;
  END;
  /
  EXEC dbms_stats.gather_table_stats('SUPER_CONF','PART_TEST');
  

  (3) to query the Table of data from the last 2 days using SYSDATE in paragraph

  EXPLAIN PLAN FOR 
  SELECT  count(*) 
  FROM    part_test
  WHERE   starttime >= SYSDATE - 2;
  

  -------------------------------------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time | Pstart. Pstop |

  -------------------------------------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |           |     1.     3 ×  7895 (1) | 00:00:01 |       |       |

  |   1.  GLOBAL TRI |           |     1.     3 ×            |          |       |       |

  |   2.   RANGE OF PARTITION ITERATOR.           |   111K |   867K |  7895 (1) | 00:00:01 |   KEY | 1048575.

  |*  3 |    TABLE ACCESS FULL | PART_TEST |   111K |   867K |  7895 (1) | 00:00:01 |   KEY | 1048575.

  -------------------------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):

  ---------------------------------------------------

  3 - filter("STARTTIME">=SYSDATE@!-2)

  (4) now do the same query, but with SYSDATE - 2 presented as a literal value.

  This query returns the same response but very different cost.

  EXPLAIN PLAN FOR
  SELECT count(*) 
  FROM part_test
  WHERE starttime >= (to_date('23122013:0950','DDMMYYYY:HH24MI'))-2;
  

  -------------------------------------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time | Pstart. Pstop |

  -------------------------------------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |           |     1.     8.   131 (0) | 00:00:01 |       |       |

  |   1.  GLOBAL TRI |           |     1.     8.            |          |       |       |

  |   2.   RANGE OF PARTITION ITERATOR.           |   111K |   867K |   131 (0) | 00:00:01 |   356 . 1048575.

  |*  3 |    TABLE ACCESS FULL | PART_TEST |   111K |   867K |   131 (0) | 00:00:01 |   356 | 1048575.

  -------------------------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):

  ---------------------------------------------------

  3 filter ("STARTTIME" > = TO_DATE (' 2013-12-21 09:50 ',' syyyy-mm-dd hh24:mi:ss'))))

  Thank you in anticipation

  Jim

  sysdate is not constant and its value may change from time optimization of execution; but the optimizer can deduce that he will be a known running value and then produce a plan that will make the size of partition running.  This is the meaning of 'KEY' in the column pstart – the partition of departure will be known at run time and the size of partition will take place in order to eliminate the previous partitions.

  Concerning

  Jonathan Lewis

• ENVY 4524: Cannot print 4524 WANT using MAC CAPITAN

  I recently bought a new HP ENVY 4524 and can't print. I followed all the instructions that I can find, and when I try to send a document to print it just isn't. It will say "printing" and "finished printing" but nothing happened!  I upgraded my OS to El Capitan, set up on my wifi and checked there is a good connection and turned off the firewall, I can print from my I pad.  I would be grateful for any advice solve it please.
  Thank you

  Hello

  Try to remove the printer and then add it again by opening the Preferences tab and then selecting «printers & scanners»

  From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.

  This is often useful if you have trouble establishing a connection.