Screen color problems with Dell XPS 15 on battery!

Similar Questions

• Problems with Dell XPS 435 sound

  Hello:

  I have a DELL XPS Studio desktop purchased in 2009 with Vista 64-bit OS. Until 3 days ago, the speakers on my computer worked. These are the original speakers that came with my BOSE Companion 2 multimedia pregnant computer. Initially, the sound was 100%, now it is suddenly down to 40%. I upgraded the speakers Bose one another and I will always have the same problem, my sound quality is reduced from 100 to 40%.

  I checked all sound card drivers and they are up-to-date, I also checked the sound Manager file, and it is also in order. I also did a "sound test" and I can hear the sound on the left & right speakers, the problem is that when I tried to listen to music or listen to video online I hear a very low noise coming out of two speakers, almost like a whisper.

  Can someone give me some tips fix - it.

  Silent in NYCABE

  Hi Nathalie:

  Thanks for your recommendation, I installed several audio drivers which have been recommended on the Dell Diagnostics page, but this has not resolved my problem of sound.  I think I probably need a new sound, in addition to the other parties. My computer is going on 4 years, his begins to fall apart, that I recently bought a replacement.

• Intel Centrino Advanced - N 6235 problems with Dell XPS 12 (Windows Pro 8, "disconnect / media disconnected")

  I recently bought a 12 XPS with windows 8 x 64 preinstalled. I was not able to maintain a stable connection to my WLAN. However, 7 other devices (laptops, etc.) are all connected without problem. Only the troubled computer runs W8. I have the latest drivers for the Centrino chipset and the ProSet (and everything else) download from Dell on March 14. Sometimes it connect, but after a few minutes it disconnects again. Sometimes I media disconnected and other times a limited connection where the DHCP Server data could not be collected. Seems very irrational!

  The configuration is default Dell. Any ideas?

  I downloaded the latest drivers from Intel and a clean installed (actually it didn't work after 3 installs!) I also changed the channel on the router to 11. Now, it seems to work. I suspect that the problem is caused by the driver in W8, but never less the drivers provided by Dell did not

• Problems with my XPS 1530, think it's the hard drive

  I recently had some problems with my xps 1530. The screen freezes quite often. Okey it no worries, I'm really used to it since my last pc was 5 or 6 years ago when I bought a new, but it does not seem to recover after this freez. I have no way to turn it off except by pressing the power butten for several seconds. I'm no expert, but I don't think it's good for the hard drive. And seriously, I'm tired of doing too many times. In any case, I decided to run a disk check, although it usually runs after reboot in this way. When he starts checkup automatically after a reboot, like that, there are only 3 steps. But I had planned a checkup in the my computer section, right click on the c:

  Step 1-3 runs smoothly, step 4 takes a little while, but it comes through. Step 5 stops at 98%. I even tried twice, twice stopped at almost at the same place.

  I don't really know how I could have damaged the drive somehow, the laptop is on my desk since I bought it and I got it late July: s

  Hope for a useful answer, thanks :)

  
  

• blue screen "possible problem with SPCMDCON. SYS

  all about office went< only="" program="" available="" and="" showing="" is="" mcafee=""> bed blue screen "possible problem with SPCMDCON. SYS '.  Hard drive reads accurately but very little available. Get pop up of the AV PROTECTION ONLINE DECLARING PAY 59.95 AND we will solve the problem. also the problem States is due KEYLOGGER ZEUS, please help

  Hello

  1. are you able to boot to the desktop?

  If you are able to boot to the desktop, run the antivirus scan and then run the System File Checker.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If you are not able to boot to the desktop, please start the system in safe mode and follow the steps mentioned above.

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Vista Service pack 2 install problem on Dell XPS M1330 with SSD hard drive

  Hello

  I have a DELL XPS M1330 with Solid State SDD drive. None of the solutions have solved my installation problem including run all the tools to clean up the intall. It restarts after installation, then crosses the restart process, then the States 'installation failed' and then back again.
  Vista Ultimate 32 bit, 24 GHz chip. Nothing else cannot simply install service pack 2.

  Thanks in advance for your help

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  =============================

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Is anyone has problems with Dell support - called using micro

  Hello users of the Forum.

  My 2720 xps is not save anything when I use the microphone jack and little record (low volume) anything when I use the microphone. I also have questions about the use of large screen XPS2720 to extend my laptop screen using HDMI from laptop HDMI in the XPS. It does not either. Here is my support issues:

  1 has reached the customer. The person would put me on hold for each 2 questions simple and "research". His answers were vague, and then he said he would transfer me to Office work support as he has managed "inspiron" only! His transfer has failed and abandoned call.

  2. calls on the customer. Voice was smothered at the other end, when I mentioned, so the call dropped!

  3. calls on the customer. The person could not understand what I was trying to make (connect laptop XPS display and audio not sent / mic jack question), he tried to understand the question but kept in interpreting everything that I said mean that I was trying to extend the XPS specification to a monitor. I asked to speak to someone who knows the best product, he informed that he will put the prime contractor, and the abandoned call. Now I'm wondering if there is another meaning to call down when Dell is unable to answer.

  4 called again, the first person who I arrived before also picked up my call, when she heard what I was looking for the resolution, the call dropped.

  I don't know what is happening with Dell technical support. I would like to know if anyone else had experiences similar to my problems, especially when Dell support is unable to successfully respond to the question.  I really prefer to talk to actual dell support person in the United States (instead of people at offshore call center) to get answers to my questions. I tried to download the XPS manual and the link led me to a PDF doc, which indicates that it is the manual of the user, but everything, it's a manual to pay off the system - open lids, replace chipsets, back cover, display etc.. !! Frustrating :-)

  As Mary said, there are 2 ports HDMI on the XPS 2720. If you try to view the screen of the laptop on the XPS 2720, you must use HDMI-In port on the back of the specification XPS (#14 here).

  There are also press the input source selection button (#9) to select the input source. It may take a couple of presses until she "cycles" through all the choices and sees the laptop. So, wait a few seconds between the push to give him a chance to change the input source.

  And you should probably also go into Windows Display options on your laptop and make sure that it is set to use a second monitor...

  EDIT: Link fixed

• Problem with Dell Latitude 2100 (with windows vista) is a driver (file: \windows\system32\drivers\msahci.sys) catch 22, it's that it doesn't have an internal cd-rom

  I have a dell latitude 2100 and when it is consumed first upward it goes to a screen of security and said that is wrong and it is said that the status of this file is 0xc000000f how I could fix this without an installation disk because it does not a cd-rom

  Hi Rick,

  Thanks for posting your query in Microsoft Community!

  The description of your problem, you are facing problems with your Dell Latitude 2100 and receiving tell them an error message which is bad and he said that the status of this file is 0xc000000f. In order to quickly provide a solution, please answer these questions:

  1. What is the exact error message with error code?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you check the drive for errors, and then check if it solves the problem.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

   

  Important: While running chkdsk on the drive, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Note: It may prompt you to insert the Windows installation disc. However, you can use the external DVD player and check.

  Hope this information helps. Answer please if you have any additional questions about the problem you are having and we will be happy to help you further.

• (Redirected) Dell XPS 15 9550 - battery problems

  Have been a customer for a long time of the Dell laptops.  Bought various laptops such as Vostro 1720, XPS Duo 12 etc.

  I bought the XPS 15 9550 on 27 June 2016 after costing a fortune.

  Immediately noticed a problem with the battery life that is loading / unloading quickly.

  The first time, got battery in full in a few minutes.  After recharging, at the beginning he said battery life is 4 hours. But the battery discharged within just two or three hours of time.

  Since then, battery charges to the full in about 30 minutes and ends in less than 2 hours.

  Because my laptop is still under warranty, I raised a ticket of support immediately on June 29, 2016.  Unfortunately until now, I didn't reply to Dell.

  Please can you help solve this battery issue.

  Hi roadsidetree,

  Please repost this to our customer support Forum.

  http://en.community.Dell.com/support-forums/customercare/

• Problems with Dell USB - C (DA200) to the HDMI, VGA, RJ45, USB3 adapter

  Hi all

  I guess I'm a little desperate at 01:45 haha...

  I just got my XPS 13 9350 and it's great. I bought the USB - C DA200 adpater USB3, RJ45, VGA, HDMI. Unfortunately, I have some difficulty with the device. They are listed below:

  (1) plug, computer does not recognize the device. If I right click and uninstall in Device Manager and do a scan 'new material', it works again - but not for long.

  (2) the device and the Realtek gigabit portion to connect and reconnect every second in Device Manager and it's annoying.

  (3) disabling the wireless card/connection really seems to help the unit to connect and it works 100%. ONLY when the wireless adapter is disconnected.

  Basically, windows is to have a real time hard keep this adapter plugged... almost as if he can't recognize it. I tried to install the drivers for the card - nothing. I've updated all the firmware from Dell crush (including the chipset) and the BIOS... nothing. Same thing. If you do a search on google, there are a few discussions on this problem. There is a nice size on Reddit.

  Someone has an idea, what happens? It's a real shame that a beautifully designed and expensive adapter does not work with a Dell computer.

  Thank you, AJ

  In another thread ("XPS 13 9350 - SSD USB C 3.1 - very unstable/not usable '-I can not add links), the following fixed my XPS 13 9550 problem using a drive HARD USB 3.0 with the Dell USB - C for HDMI/VGA/Ethernet/USB3.1 adapter:

  ... the adapter USB - C and WiFi are kind of material and power wise. If you go to the options of the advance of the WiFi adapter and change the WiFi output at 75%, this solves a lot of problems with the connection / disconnection of USB - C questions. Exit at 75% reduction does not affect your connection on wireless networks.

  My HARD drive kept connect/disconnect when you use the adapter, but this correction took care of her.

• Problems with Dell r.620 updated

  Today, I tried to make 3 x updates 3 Dell r.620 as follows:

  • BIOS 2.4.3 to 2.5.2
  • 16.0.24 to 16.5.20 Intel NETWORK card firmware
  • iDRAC Firmware Version to 2.10.10 (iDRAC settings rest 1.65.65.04 Version)

  All 3 of r.620 had identical firmware for starters.

  I applied updates for 3 r.620 systems at the same time through iDRAC Express Web GUI update mechanism.

  On the first 2 systems, the updates worked fine.

  On the last system, I'm in trouble.  When I came back to this system, he has been "priming" and say "entering the lifecycle controller...". "but after half an hour, it does not!  I noticed that whenever I would it boot, he'd do the same thing... "Entering Lifecycle Controller"... then when it is arrived until the moment where Intel Boot Agent initialize, there are two points, then a blank line... then the machine would just stand there.

  Through racadm, I managed to reset the State of the life cycle of the inverter and remove the queue of work hoping I could reflash just updates and everything would be fine.  Now, the system does exactly the same thing, except that it does not seek to enter the controller of life cycle more.  Now, when he's sitting there, he is not "completely" hooked - in other words, if I hit F2 it will say that it is entering the system setup, press F10 he'll say he'll perform a PXE boot... etc... in fact, you can hit all the F keys and he'll say he'll enter system configuration , PXE boot, enter BIOS Boot Menu, etc...

  I am suspicious it is necessary with a failed NETWORK upgrade card... Here's what I see in the racadm for BIOS swinventory:

  -------------------------------------------------------------------

  ComponentType = BIOS
  ElementName = BIOS
  FQDD = BIOS. Setup.1 - 1
  InstallationDate = NA
  Version Rollback = 2.4.3
  -------------------------------------------------------------------

  ComponentType = BIOS
  ElementName = BIOS
  FQDD = BIOS. Setup.1 - 1
  InstallationDate = NA
  Available version = 2.5.2
  -------------------------------------------------------------------

  ComponentType = BIOS
  ElementName = BIOS
  FQDD = BIOS. Setup.1 - 1
  InstallationDate = 2015-03-12 T 12: 49:29Z
  Current version = 2.4.3
  -------------------------------------------------------------------

  Hmmm... Current version seems to be 2.4.3 with AVAILABLE version 2.5.2.  (which is strange as when starting the machine, it reports the 2.5.2 BIOS)

  and for the NETWORK card:

  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Ethernet Intel(r) 10 P 4 X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 62
  FQDD = NIC. Integrated.1 - 2-1
  InstallationDate = NA
  Rollback Version = 16.5.20
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Ethernet Intel(r) 10 P 4 X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 62
  FQDD = NIC. Integrated.1 - 2-1
  InstallationDate = NA
  Available version = 16.5.20
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Ethernet Intel(r) 10 P 4 X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 62
  FQDD = NIC. Integrated.1 - 2-1
  InstallationDate = 2015-03-13 T 10: 50:01Z
  Current version = 16.0.24
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 64
  FQDD = NIC. Integrated.1 - 3-1
  InstallationDate = NA
  Rollback Version = 16.5.20
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 64
  FQDD = NIC. Integrated.1 - 3-1
  InstallationDate = NA
  Available version = 16.5.20
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 64
  FQDD = NIC. Integrated.1 - 3-1
  InstallationDate = 2015-03-13 T 10: 50:07Z
  Current version = 16.0.24
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 65
  FQDD = NIC. Integrated.1 - 4-1
  InstallationDate = NA
  Rollback Version = 16.5.20
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 65
  FQDD = NIC. Integrated.1 - 4-1
  InstallationDate = NA
  Available version = 16.5.20
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 65
  FQDD = NIC. Integrated.1 - 4-1
  InstallationDate = 2015-03-13 T 10: 50:08Z
  Current version = 16.0.24
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:30
  FQDD = NIC. Slot.3 - 1-1
  InstallationDate = NA
  Rollback Version = 16.5.20
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:30
  FQDD = NIC. Slot.3 - 1-1
  InstallationDate = NA
  Available version = 16.5.20
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:30
  FQDD = NIC. Slot.3 - 1-1
  InstallationDate = 2015-03-13 T 10: 50:03Z
  Current version = 16.0.24
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:31
  FQDD = NIC. Slot.3 - 2-1
  InstallationDate = NA
  Rollback Version = 16.5.20
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:31
  FQDD = NIC. Slot.3 - 2-1
  InstallationDate = NA
  Available version = 16.5.20
  -------------------------------------------------------------------

  ComponentType = FIRMWARE
  ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:31
  FQDD = NIC. Slot.3 - 2-1
  InstallationDate = 2015-03-13 T 10: 50:05Z
  Current version = 16.0.24
  -------------------------------------------------------------------

  If the versions downloaded, but the current version is not the new version.

  I checked in other systems, and it is.

  Now, I tried to go back in idrac7 web GUI and rollback, but it says that it cannot do.
  At the same time, the BIOS boot screen shows the BIOS as being 2.5.2!

  I had a conversation with Dell.  The conclusion was that the motherboard and possibly the network card girl needs to be replaced... somebody's going to come out on Friday to do...  That being said, I'm 99% sure that there is a way to solve this problem by replacing the entire Board.  I 99% sure because I think to solve the problem requires the system to enter the lifecycle controller, which does not now... and no matter what job I can queue through the UI web or racadm won't do much if it cannot access the lifecycle controller.

  I can still access the idrac via web and ssh.  I tried to work on the jobqueue change LegacyBootProto None of PXE, thinking that this MIGHT get rid of the "Intel Boot Manager" prompt, but when the system boots, it does not it:

  racadm view jobqueue
  -------------------------JOB QUEUE------------------------
  [Job ID = JID_285566585779]
  Job Name = configure: NIC. Integrated.1 - 1-1
  Status = on demand
  Start time = [now]
  Timeout = [not Applicable]
  Message = [JCP001: task successfully on demand.]
  ----------------------------------------------------------

  I don't even know whether or not the problem is, really, the Boot Manager.

  I thought about another possibility... If it's Boot Manager... If I disable the NIC daughter through racadm card, then I would immediately lose access to idrac and not be able to return to the previous state, but if the deactivation of the card would let me go further so that I could get back in the lifecycle controller and fix things then maybe it's worth? Don't know.

  Any thoughts?

  Jason.

  Yes. I tried this option.  It's the same thing.  (hang after Intel Boot Agent).

  The motherboard of the server has been replaced, and I am currently re - install the updates... Already updated the BIOS which is come with this (2.2.2) server could not update 2.5.2.  I'm now trying an update of the idrac.  All these problems with the updates are frustrated to no end.

  Jason.

• HELP - color problem with LR3.5

  Hello

  Sorry for my bad English,

  I have Lightroom for a few days, and I discovered that the image file displayed in Lightroom has a yellow color rendering.

  Only a screenshot I did yesterday.

  

  The displayed original file on the same screen on the windows file preview is OK as you can see below.

  

  This file has been generated, it is not an image, it goes from black to white with gray 20 level.

  I reinstall LR, I check the preset when loading the file, I have reset the preset in the part of development, it's always be displayed with this warm tone.

  Does anyone have any idea?

  I thank you very much in advance,

  Vincent

  Vincent,

  This looks like a problem with the monitor profile. To check as the root cause, you can assign a sRGB profile to your monitor and see if the color cast disappears.

  In Windows XP, follow these steps:

  • Click somewhere on your desktop, select "Properties".
  • Select the "Settings" tab and click "Advanced."
  • Select the tab "color management".
  • Click 'Add '.
  • Select the "sRGB Color Space Profile.icm" file in the file list, which should show the directory 'C:\Windows\system32\spool\drivers\color '.
  • Press OK as many times as necessary to close the display properties

  This assigns the sRGB profile to your monitor, and you can check if the color cast is gone. This isn't a permanent solution, however, you will need to calibrate your monitor using a hardware calibration device.

  Beat

• problems with Dell Inspiron 15 3000 series-3543

  5th generation of the model; I7; 8 GB of ram,

  Starting time is, it's up to 60 years or a little more sometimes.

  Have already disabled all startup programs outside of anti virus and malware analyzed.

  Stand up black screen when starting. The game is already in repair twice when clean install windows first and 10, then windows 8.1 has been done.

  Also having problems with the touchpad. latest version of the driver has been installed.

  Please help.

  

  If all your troubleshooting fails, you can use the windows 8.1 tool to refresh your PC without affecting your files. Please click on the link below:

  www.YouTube.com/watch

• Problem with DELL Inspiron 3521 audio!

  Hello

  I bought this laptop DELL Inspiron 3521 sometimes back and I am facing a problem with the audio. I had the experience that I use only. Audio keeps switching from left to right and sometimes works only on one side. Initially, I thought that it was a problem with my headphones but I tried with several headphones and still I have experienced the same problem. But the speakers of the laptop works very well. Could this be a problem with the audio port? Can someone help me on this.

  Thank you

  Umesh

  umeshjaishankar

  Could this be a problem with the audio port?

  Hello, Daniel. How to determine who must pass the native Windows audio driver Realtek audio driver. If you don't have the driver from Realtek, you can get it from the Inspiron 3521 support page.

  1. open Device Manager (type devmgmt.msc in the box of Windows search).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  If the headphone does not work correctly when you use the Realtek or driver audio native then it's a hardware problem.

  If it works fine with the native driver but not the Realtek driver, then the Realtek driver is buggy. In this case let me know which operating system your laptop and I'll see if there is a Realtek driver different, that you can use.