Intel Centrino Advanced - N 6235 problems with Dell XPS 12 (Windows Pro 8, "disconnect / media disconnected")

I recently bought a 12 XPS with windows 8 x 64 preinstalled. I was not able to maintain a stable connection to my WLAN. However, 7 other devices (laptops, etc.) are all connected without problem. Only the troubled computer runs W8. I have the latest drivers for the Centrino chipset and the ProSet (and everything else) download from Dell on March 14. Sometimes it connect, but after a few minutes it disconnects again. Sometimes I media disconnected and other times a limited connection where the DHCP Server data could not be collected. Seems very irrational!

The configuration is default Dell. Any ideas?

I downloaded the latest drivers from Intel and a clean installed (actually it didn't work after 3 installs!) I also changed the channel on the router to 11. Now, it seems to work. I suspect that the problem is caused by the driver in W8, but never less the drivers provided by Dell did not

Tags: Dell Products

Similar Questions

  • 4540 proBook s: Intel Centrino Advanced - N 6235 WLAN card drivers needed

    I have a ProBook s 4540 and accoding to the service manual, I can use the 670292-001 Intel Centrino Advanced - N 6235 WLAN card. I bought one on ebay. Can someone point me in the direction of the link with the service pack that contains the drivers for the wireless card? Thanks in advance for any help.

    Hello:

    Here is the link to the driver for this card...

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229456 & swItemId = ob_125823_1 & swEnvOid = 4059 #tab3

  • Screen color problems with Dell XPS 15 on battery!

    1 week bought a new Dell XPS 15 laptop, rear.

    Config: Intel Core i5, Nvidia GeForece GT 540 M (Optimus) with Intel HD graphics embedded, 8 GB of RAM

    The problem is that the color of the screen looks unreal, the color of the icons fade and look like whitish and 256 bits and faded color mode.

    The main point is that the problem only occurs when the system is running on battery. Is the problem with the Optimus technology?

    I have the latest drivers, it would be my course of action now?

    Hello

    I bought the brand new XPS 15 1 month back and I had same problem

    My features are Core i7 Nvidia GeForece GT 540 M (Optimus) with Intel HD graphics embedded, 8 GB of RAM.

    But I disable the functions of conservation of energy which is shown in the below photo attached and after that I didn't meet with this problem. U should also try and give me feed back to this topic.

    Thankx

  • Problems with Dell XPS 435 sound

    Hello:

    I have a DELL XPS Studio desktop purchased in 2009 with Vista 64-bit OS. Until 3 days ago, the speakers on my computer worked. These are the original speakers that came with my BOSE Companion 2 multimedia pregnant computer. Initially, the sound was 100%, now it is suddenly down to 40%. I upgraded the speakers Bose one another and I will always have the same problem, my sound quality is reduced from 100 to 40%.

    I checked all sound card drivers and they are up-to-date, I also checked the sound Manager file, and it is also in order. I also did a "sound test" and I can hear the sound on the left & right speakers, the problem is that when I tried to listen to music or listen to video online I hear a very low noise coming out of two speakers, almost like a whisper.

    Can someone give me some tips fix - it.

    Silent in NYCABE

    Hi Nathalie:

    Thanks for your recommendation, I installed several audio drivers which have been recommended on the Dell Diagnostics page, but this has not resolved my problem of sound.  I think I probably need a new sound, in addition to the other parties. My computer is going on 4 years, his begins to fall apart, that I recently bought a replacement.

  • Problem with Dell P2715Q and Mac Pro connection

    I have a Mac Pro 2013 with AMD 500, 64 GB RAM graphic card.  I just bought a pair of monitors Dell P2715 Q 4 K after using my 30 "Apple Cinema Display for many years.  Monitors properly function while I actually use and I can manually put the system to sleep (using the option-command-eject) and I'm able to wake the system by pressing the keys on the keyboard.  They work in 60 Hz mode UHD (3840 x 2160) and are connected with the display port (Thunderbolt) mini display port cables with that monitors came.  They are connected to two of the three bus TB. The problem is that when I restart the computer (or stop and start up), the monitors will automatically in their 'power save mode', and the Mac Pro does not seem to recognize that they are there, trendy, so I get two blank screens... no way to connect, because there is no current login screen.  The only way I can actually connect and begin using the computer is to connect an old 23 "Cinema Display, connect, and then connect the two valleys and unplug the 23". Yes, I can leave the computer and he just put the system to sleep, but when I need to close for a software update or the failure, I won't have to drag another monitor comes to start using the Mac Pro.  I have 27 days to return if necessary Dells.  Anyone have any ideas on how to solve this problem?

    That Mac has made recognition of the display for a long time consists of sending a query to display at certain times, by asking, "what is your name, and what are your skills? If these screens are asleep, they fail, and then they stay dark.

    These times are:

    shortly after the market.

    upon awakening from sleep

    When inserting the cable end Mac

    Since the Option-(detect poster) button in the display panel.

    Perhaps there is another way, you can arrange to have the display be awake when the Mac it sends the request?

  • Cannot ping the default gateway with Centrino Advanced-N 6235 on XPS 12 but CAN connect to the Internet

    I have a XPS 12 with an Intel Centrino Advanced-N 6235 wireless card.  I can't ping the default gateway with the wireless card.  When I use a USB network adapter, I can ping the default gateway for the wired connection.  I can connect to the Internet and the internal network with the wireless card and can ping other computers on the network.  I am trying to run a program to connect wireless to a projector.  I have two different programs for the two different projectors.  I can connect by cable but not wireless.  I think that the problem is anything that does not make me a ping of the default gateway or something on the wireless card.  I have a 10 latitude with a Broadcom wireless card that is connected to the same access point and can ping the default gateway and can connect wirelessly to two projectors.  They all have two windows 8 Pro.

    I downloaded the new drivers from Dell, uninstalled, reinstalled, tried to update Windows install the drivers, all with no success. Any ideas?

    The solution of the problem by chance.  I was connected to the computer with a different network than what has been used to authenticate user account on the wireless.  When I switched the user account for the user account that was logged on to the computer was the same who authenticate to the wireless, it worked.  Go figure!

  • Can not solve the problems of connection with Wifi (Intel Centrino Advanced - N 6205) card

    The card Wifi on my X 220 (Intel Centrino Advanced - N 6205) gave me so much trouble, I'm about to give up on this and buy another laptop.

    In general, the connection to any hotspot Wifi in any location is quite unreliable. It looks like it is connected for a while.

    And several times a day, sometimes several times per hour, I have to go to the Intel Wifi connection utility and click "Repair" to force the card to renew the IP address. This resets the connection and run for awhile again until I do more.

    In recent weeks, I tried everything I could think of. I uninstalled the drivers, installed the latest drivers from the Lenovo Web site, then tried those on the Intel site. Those who are a little more reliable, but the problem persists.

    If the drivers of card/can't be fixed, is there a chance to get Wifi to work again if I buy another Wifi card and install it? Should which card I try? Can be installed without sending it to Lenovo?

    Any help or ideas is greatly appreciated. Thank you!


  • Cannot detect Wireless-N with Intel Centrino Advanced - N 2230

    Hello

    I have a new laptop, Inspiron 15R 5520, which comes with the Intel Centrino Advanced-N 2230 NIC. It can only detect my wireless-G home network, but not wireless - n. I have another computer that can connect to my wireless-N, then the network works fine. I updated the driver for the greatess and most recent.

    Is this a common problem? Any help is appreciated?

    Thank you

    Raysl

    raysl,

    Adapter Intel® Centrino® Wireless-N 2230 works ONLY n the band 2.4 GHz and Bluetooth.

    Rick

  • HP dv7-7270 envy: module Intel Centrino Advanced-N 6230 WLAN 670691-001

    ENVY of HP dv7 - 7270ca Notebook PC

    Model #: C2H79UA

    I would like to upgrade my laptop to work on the Strip fi wi 5 mhz. Are there any recent changes or updates to this issue?  The last time I checked the module Intel Centrino Advanced-N 6230 WLAN 670691-001 was the only one to try, but I would like to know if it's always an option that will work or is there another method that works?

    I need to move to 5 mhz to enjoy my internet service.

    Hi @Todddo,

    I read your post and I thank you for your response. We always recommend that you buy at HP because it is certified by HP for their computers, tried, documented and tested. If you buy a third-party site, you would do so at your own risk. Our parts to store the site link:http://partsurfer.hp.com

    Our website is: http://store.hp.com

    You could call these numbers, which appear on the Web sites.

    Please check this link out and that could be really useful: http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/HP-7260he-wireless-card-upgrade... 

    Link 2: https://www.amazon.com/Intel-Centrino-Advanced-N-Wireless-Transfer/dp/B005LAIDOY

    I ask you again to contact a local before the upgrade professional technician so that other issues arise with your computer

    You will need a wifi combo card that supports Bluetooth and wifi. Otherwise, your Bluetooth function could disappear from your computer and you must use an external Bluetooth adapter.

    I hope this helps. I would like to know how this happens. I hope that the problem is solved without

    disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

    Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

    Now carefully and have a wonderful week ahead.

  • Intel Centrino Advanced - N 6205 WLAN causing blue screen (BSOD) on Elitebook 8570w Win 7 SP1 64 bit

    Hello world

    In recent months, I use a 8570w Elitebook.

    I can't tell you when the problem started, but as soon as I unplug the notebook from the power supply and WLAN is enabled, I get a blue screen after a while. Sometimes, but not this oftehn, I encounter this problem even when the laptop is connected to the power and WLAN is enabled.

    I could not determine when exactly this blue screen, but it's certainly the WLAN (Bluetooth is disabled in the BIOS for the moment). It happens most of the time when I'm under two or more virtual machines with VMWare Workstation (version 9.0.2).

    The WIFI card is an Intel Centrino Advanced - N 6205. I tried several drivers (mid-2012 at the latest in April 2013) with a complete uninstall of the previous drivers. Without success. Operating system is Win 7 SP1 64 bit.

    Google helped me a bit and I found an Intel forum where people are describing almost the same problem with these Intel WLAN modules.

    Checked the Knowledge Base of HP and I am just find more messages do not deal with the new modules.

    Should I consider replacing the WLAN (guarantee) card? Someone knows the same issue and was able to find a solution/workaround?

    All opinions are appreciated.

    Thank you
    Jerry

    Hello world

    Finally, I have launched the Intel WLAN module and replaced by a Broadcom module (HP spare part number: 669832-001, Broadcom model: BCM943228HM4L) with the driver version: 6.30.223.228 (05.02.2014).

    This solved my problem of blue screen. Intel (same as last) drivers do not work with the configuration I have on my Elitebook 8570w and I gave up to find an another software/driver associated solution. In recent weeks, I can run multiple virtual machines in VMWare (9.0.4) without problems.

    Hope this information is of help to anyone who is struggeling with the Intel Centrino Advanced-N 6205 WLAN module.

    Cheers, Jerry

  • Intel Centrino Advanced - N 6205 intermittent dropouts

    We have big problems with this particular adapter in our environment. We receive intermittent dropouts. The connection will freeze and stop responding to the point where you have to do a windows repair or restart the adapter to operate again. You can be connected for a whole day without any problem, or it can happen randomly for example after 20 minutes to be connected. Nearby, other devices e.g. an agn intel 5100 and 5300 work perfectly.

    You get no indication that the connection is interrupted and the adapter in the systray looks as if it is still transmitting packets but affecting no. Cisco WCS troubleshoot does no problem. Events in debugging stop and not start again until you do a repair on the machine.

    Support Intel and Lenovo were really unnecessary (they basically do not want to know, supported service), so now I'm on Cisco, just in case it's a configuration problem, which I do not think it is as we have not reported all issues with other guests.

    On the sides of the machine, we have:

    Lenovo x 220 Tablet with adapter mini pci-e Intel Centrino Advanced - N 6205.

    Also happening with Fujitsu T730 tablets also with mini cards pci-e Intel Centrino Advanced-N 6205

    We have tried all versions of driver intel of the last 14.2.0.10 down to the OEM versions provided.

    they are under Windows XP SP3. We have also tried with Windows 7 and get similar questions.

    We use Windows Wireless Zero Configuration, WPA2-AES with PEAP and authentication (computer) against Cisco ACS v5.2 talk to the AD of the machine.

    On the side of wireless infrastructure, we have:

    Cisco 1142N APs (-E - K9) connected to batteries of 3750G w/poe

    The controller is a model of 3750G - 24 - WS - 50 running version 7.0.116.0

    managed by the WCS.

    The wireless, 20 mhz channels on 1,6,11 on the side of 2.4 ghz (N is off), but we have N activated with channel 40 mhz on the 5 GHz with all countries UK channels.

    The machines to connect to up to 300 MB/s and the quality of the signal is excellent. Density of the PA is high enough in the room. DCA, PTC power control and Tx are active and set to automatic.

    Can't think of more in detail to include, but I have ideas that anyone can have.

    Hi all

    I wanted to shed light on this topic. We are aware of a problem with connection on the Intel 6205 legs specifically. The problem will be resolved in the drivers Intel 15.1. The cause has to do with omission of the acknowledgement of receipt a package when the MFP Infrastructure is enabled, then the current workaround is to disable the MFP infrastructure.

    If you can, please try to disable Infrastructure MFP and test connectivity from the client.

    -config wps infrastructure disable mfp

    Kind regards

    -Pat

  • Code of Intel Centrino Advanced-N 6200 AGN 43

    I'm having a similar problem as a guy in another thread here. However, these generic answers did not help, I tried them all several times for weeks.

    The problem persists. This equipment is installed in my Toshiba Satellite A665, running Windows 7 Home Premium 64-bit. Here is my report of the problem:
    This adapter creates two "Microsoft Miniport adapters WiFi" without which the adapter does not work correctly. Sometimes, if you use the laptop for an extended period of time (4 + hours usually) miniport adapters get the point yellow exclamation and during the inspection, they spit on a code 43, and I lost the internet connection.
    I found a way to work around this problem, to fix it without having to restart the notebook: open Device Manager, click on ' Intel Centrino Advanced - N 6200 AGN and turn her off. " There are usually 3-4 turns of this manual reset to solve the problem.
    Run the troubleshooter Wireless does the same thing: resets the adapter, but does not solve the problem.
    • I ran the windows update, everything is up-to-date.
    • I searched drivers, everything is up-to-date.
    • Problems running windows wireless has no effect.
    • I uninstalled and reinstalled the device a dozen times, without success.
    • I disabled network adapter power management settings.
    • I moved and changed ISP, internet dial-up SPEED, modem, router, etc., and it STILL happens. Firmware is updated.
    Nothing has worked. It appears here and on the Intel site looking around, there are a few problems with this adapter and windows 7 64-bit. I don't know where the problem lies, but the problem exists.
    If no help other than what I mentioned that I did already here would be appreciated, and if it is impossible to help, pointing me in the right direction would help as well.
    Thank you.

    I found that my neighbors have the same router channel as I did.  After changing my router and the channel on the adapter, speedtest.net showed the immediate fix.

  • Where can I get Intel Centrino Advanced-N + WiMAX 6250

    Original title - DELL Inspiron mini

    You can download the following Intel Centrino Advanced-N + WiMAX 6250 what site

    Hi, Anthony.

    What version of Windows are you using?

    If you cannot locate the Dell downloads for your device, try to Download Intel Center.

  • HP ENVY m6-1125dx and Intel Centrino Advanced - N 6230

    I want to Exchange my (Ralink RT5390R 802.11b/g/n) wireless card Intel Centrino Advanced - N 6230, but the manual for the laptop shows the part number compatible for the intel centrino is 670691-001. When I google 670691-001 sometimes as something else.

    My laptop is C2N76UA

    Help!

    The user manual is listed as compatible with your device. It seems to me that the part number in not correct.

  • Problem with the installation of Windows XP on the Satellite A200-1RK

    Hello!
    I ve you have a problem with my laptop.
    I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
    Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
    Why?
    Can someone help me?

    Maybe I can use drivers from another laptop A200 series, but which?

    Hello
    a good explanation how to install XP on a SATA machine can be found here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

    Welcome and good luck

Maybe you are looking for

  • Keyboard on my Portege 4010 problems

    Out of the blue, I have keyboard problems on my portege 4010. I have bad start up and now that I have, I can't access some of the problems, the keys get stuck, funny noises... beeps all the symptoms of a questionable keyboard. What I can do, otherwis

  • Focusrite with iMAc

    Hi, I would like to connect focusrite saffire pro40 to iMac. Saffire ends with firewire 400. I can only find firewire800 adapter Thunderbolt. What is the solution please? see you soon

  • Appearance of the SONY Internet Player NSZ - GS7 logo then black screen, no signal.

    NSZ - GS7 unable to connect to the TV without connection for SONY installation logo then only black screen no signal. Help, please? I bought this player online, the initial Setup was easy... connected wireless to the network, combined with distance a

  • Vista sticks to the Welcome screen

    Hi, I read some of the posts that people put here and I can not find an answer for my problem, my friend has a computer laptop sony vaio and when she takes care of vista, it sticks to the Welcome screen, I got him to try to connect by using safe mood

  • 995c driver required for windows 7 64-bit and vista 64-bit

    Need help, can't find drivers for my printer.