Screen Fatal Error C000021a - blue 0xc0000006

Similar Questions

• Fatal error c000021a system

  original title: ERROR

  Hello

  Ran the upgrade from XP to Windows 7.

  Blue screen

  STOP: c000021a {fatal system error}

  The initial session process or the process of the finished system unexpectedly with a status of 0 x 00000000 (0 x 00100410)

  The system has been shut down

  WHAT should I do? I need your help desperately!

  TX André but I have tried to reboot from the CD rom, but without success. The blue screen and error even arrives.

  It looks like the faulty RAM for me.

  Please download memtest86 + [1] write a new bootable CD (use a CD - RW if possible) of ISO (download and use ImgBurn [2] for this), restart your PC and scan your RAM 4-5 h to find errors.

  André

  [1] http://www.memtest.org/download/4.10/memtest86+-4.10.iso.zip
  [2] http://www.imgburn.com/index.php?act=download

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Fatal error C000021a 0xC0000354 after the installation of security updates, October 12, 2010

  I installed the updates of windows on October 12, 2010 and also improved the adobe acobate security update security this week.  Got a fatal error code I listed above... when I reboot the screen was frozen... loved this blue screen... now what... microsoft help me with this one?

  Hello
   
  I suggest you try the steps in the article.
  http://support.Microsoft.com/kb/156669

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• While to my desktop screen; the error on blue screen appeared... STOP: Ox0000000c5 (Ox00000002, Ox00000001, Ox00000004, Ox805515A1)

  Original title: in my desktop screen. the BSOD appeared...

  Hello everyone,

  While to my desktop screen (don't remember if I was doing anything however), the BSOD appears, indicating the system stopped to avoid any damage occurs.

  The following was then shown (exactly as you see):

  STOP: Ox0000000c5 (Ox00000002, Ox00000001, Ox00000004, Ox805515A1)

  Then a memory dump has been launched.

  The only way to get rid of the blue screen was to unplug the computer from the power source, then turn it back on.  After reboot, "error reporting box" appears asking if I wanted to report this error to Microsoft I did), then closed the box.  Almost immediately after, the computer I connected to the Internet to a site that says "Microsoft error report" in the upper left corner of the screen.

  Then, there was some additional information about the page displayed on some system functions in my computer does not.  I was directed to click on a link to the so-called "Roxio...?  & then asked to download, "Pxengine 4_18_16A.exe.  (Provided by Sonic Solutions, version 1.13.37.0, created on 20/07/2009).

  This is now a 5th time a blue screen appeared during 5 days.  This time, the only difference is in the codes and being redirected to the page described above to download something I've never heard of and have no idea of what it is supposed to do.

  I would appreciate any information that someone has just what it is.  I'm simply puzzled.

  Thank you very much in advance!

  Hello

  1. don't you make changes on the computer before this problem?

  2 do you have software Roxio installed on the computer? If so, then Uninstall the software and check.

  You can also check if the problem persists in the clean boot state.

• Computer stops with a blue screen with error fatal when the iPhone is connected

  I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

  First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

  My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

  I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

  Thank you.

  Hi 1980ckc,

  1. have you tried to connect the iPhone to a different USB port?

  You can check out the apple support link and check if it hleps:

  iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

  http://support.Apple.com/kb/TS1502

  Also check out the apple discussion link:

  http://discussions.Apple.com/message.jspa?MessageID=10339681

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows xp error c000021a

  When I connect my laptop I have a system fatal error c000021a

  computer does not start!

  Help, please

  Hello

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe. When the Windows NT kernel detects that or the other of these processes has stopped, it shuts down the system and triggers the STOP 0xC000021A error. This error may have several causes. Among them are the following:

  ·        Incompatible system files have been installed.

  ·        A Service Pack installation has failed.

  ·        A backup program used to restore a hard drive does not correctly restore files that may have been in use.

  ·        An incompatible third-party program has been installed.

  I suggest you to follow the steps mentioned in the article below and let us know your progress.

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L650 - blue screen, event tracing fatal error

  Hello! Good morning / evening depending on where you are!

  I have a L - 650 Satellite nearly 3 years, wortking on Windows 10, updated regularly.
  Since August 2015 a blue screen appears saying "Fatal error tracing Event" or "unhandled exception". then black screen "Press ctrl + Alt + Delete" so familiar to the born of the users BACK. Ant I have to reboot.

  In October, I had my fixed disk has changed, but the problem persists much less frequently.
  Some forums announce that there is a compatibility issue with W10

  Any information or should I buy a new machine?
  TKS
  Lionel

  Moreover, my new fixed disk is a 15KXTAP8T of TB Toshiba S/N 1 1P2C ICA HDKGB13HZA01 T MODREL MQ01ABD100 REV AAH AA01/AX
  Lionel

• Stop: c000021a {fatal error} the windows logon system process ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000) need help please system does not start

  Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?

  You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.

  When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.

  There should be a copy of winlogon.exe here:

  c:\Windows\System32\dllcache

  Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache.  If you do not see here, search your HARD drive and find one.  Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...

  You just need to replace the file winlogon.exe somehow.

  When you are finished replacing, restart as usual (remove the CD bootable of course).

  With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• After 12/08/2009 updates treatment, an error c000021a fatal, with 0xc0000142 error code

  Running XP Home, SP3 all updates security install through 12/08/2009. After that the last round of updates downloaded and processed, to restart, the machine is looping on a blue screen with c000012a, with code 0xc0000142 error fatal error.  Attempts to use the facilities of repair on the XP install disk fails, the disk can not find a valid installation of XP on the computer.  Use another tool to boot, I see that all the directory structure and the files are still on the C drive as it should.  Secure boot or tries to return to the last known working configuration does not either.

  How can I get out of this situation?

  I don't have access to a registry editor at this point.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  Microsoft.public.windowsupdate discussions

  They will help you in the above Windows Update Newsgroup.

  This Forum is for the Vista updates.

  
  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Stop error code blue screen: STOP: 0x000000F5

  I am a student and I take 2 of my classes online.  As soon as I decided to take my classes online my computer starts to work again. I can't afford to take it to the cause of Squad of geek I'm behind in my classes. It happened already, blue screens, and I was about to start my classes then instead of he sends to a diagnosis, I thought I could solve the problem by simply installing a new hard drive. If that's what I did. About a week later, I got another blue screen and since I had just put the new hard drive and a warranty, I got and they fixed, does not really enter in what the problem was. Now about a month has passed and the dreaded blue screen is back. This time that I wrote all the error codes and everything I did to try to solve the problem. I guess only through diagnostic tests, and to install a new hard drive was a mistake, given that I spent $260 and the problem is not resolved. In any case, I'm sorry I got carried away with the details, but I'm desperate! Last night, I had the first blue screen and read it.  The usual "a problem has been detected and windows were shut down to prevent damage to your computer.

  Then he said (and this was the first and only time I've seen this message) "run a system diagnostic utility supplied by your hardware manufacturer. In particular, to achieve a memory check, and check memory faulty or incompatible. Try to change your video card. "And then the usual"disable any hardware or drivers and software, etc... Technical information: STOP: 0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000).  Then, I started it in safe mode w/network, ran windows memory diagnostic tool and it found nothing. Then I tried Microsoft fix google and I change video card. Ending me upgoing in the properties of my video card to find out information about the pilot. Somehow, I ended up on Intel' support and found a newer driver for my video card, so I downloaded it. But then I got the blue screen again. This time it read; "A problem has been detected etc..  FLTMGR_FILE_SYSTEM with Tech Info STOP: 0x000000F5 (0x0000006E, 0x87AD62F8, 0x87AD62C8, 0x00000000). Can you please tell me what is happening so I can solve this problem once and for all! Or should I just invest in a new computer?   Thank you for your time.

  Hello

  Since this has happened material suspect in particular hard drive and anything
  report (such as the motherboard and wiring) - also, malware or same antivirus/anti -.
  spyware/security programs.

  ------------------------------------

  You have ZoneAlarm or any 3rd party firewall installed? If so, this could be the cause.
  Other antivirus/security programs could be at least partially responsible.

  This fix "could" apply however do not use if you are quite safe.

  Two drivers of platform using WFP (Windows Filtering) causes a computer crash when the
  computer running Windows Vista, Windows 7 or Windows Server 2008
  http://support.Microsoft.com/kb/979278

  Check also:

  The General causes of errors "STOP 0x0000007F" (applies to Vista and Windows 7 as well)
  http://support.Microsoft.com/kb/137539

  ===========================================================

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------

  BCCode: 0x0000007f 7F

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows
  Updates to see if all drivers have been updated it just before what is going on has begun.

  For 7f - this could be a problem of material such as uncomfortable cards or memory, while there are
  other causes. Power electric low could also lead to this. Use the troubleshooters above and below
  and when you get to the drivers and memory sections refer to my next message below and then
  return if necessary troubleshooting services

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
  cable (try not just to close) on both ends if they are accessible and on the device ends if not
  (remove the cables and the resettlement of help them to eliminate minor corrosion).

  If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or your
  Support of the machine system.

  ----------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or adouble foul(an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
  • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
  • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
  • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault

  CAUSE

  0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

  A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

  Solve the problem

  Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

  The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

  Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

  Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menuof Advanced Options , select thelast known good Configuration option. This option is most effective when you add a single driver or service at a time.

  Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

  If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

  Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

  BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
  * 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

  -----------------------------------------------------------------------------------------------------------------------

  BCCode: F5 0x000000F5

  The most common cause of this problem is a problem of hard disk or hardware connected to the drive
  as the mother/controller card and cabling. Other possible causes include antispyware/antivirus/security programs.

  Bug Check 0xF5: FLTMGR_FILE_SYSTEM

  Bug FLTMGR_FILE_SYSTEM control has a value of 0x000000F5. This indicates that a fatal error has occurred in the Filter Manager.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support.
  To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  FLTMGR_FILE_SYSTEM settings

  The following settings are displayed on the blue screen. Parameter 1 indicates the type of violation. The meaning of the other parameters depends on the value of parameter 1.

  See this link for the parameters or the Faultwire link below.
  http://msdn.Microsoft.com/en-us/library/ff560383 (v = VS. 85) .aspx

  Cause

  The cause of the problem is indicated by the value of parameter 1. See the table in the settings section.

  
  Resolution

  If parameter 1 is 0 x 66, you can debug this problem by checking that your minifilter driver recorded a reminder after the operation for this operation. The current operation are in the structure of recall data. (See parameter 2). Use of the ! fltkd.cbd the debugger extension.

  If parameter 1 is 0 x 67, you must verify that you do not have a leak pool unpaginated somewhere in the system.

  If parameter 1 is equal to 0x6A, make sure that your minifilter driver does not refer to this file object (see parameter 2) to get a handle at any time during the processing of your minifilter of this operation.

  If parameter 1 is equal to 0x6B or 0x6C, then a State internal unrecoverable error has occurred causing the operating system bug control.

  If parameter 1 is equal to 0x6D, make sure that your minifilter driver does not call FltReleaseContext too many times the specific context (see parameter 2).

  If parameter 1 is equal to 0x6E, make sure your minifilter driver does not call FltReferenceContext after the context has been removed (see parameter 2).

  BCCode: F5 0x000000F5<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/FLTMGR-file-system-0x000000F5-* 1242.html

  ============================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error IRQL_NOT_LESS_OR_EQUAL blue screen

  Hello

  I just bought HP Pavlion dm4 1209tx and I get an Error IRQL_NOT_LESS_OR_EQUAL blue screen. It occurs usually when I play music or watch videos. Initially the system will just hang, then the blue screen appears. I'm just a beginner so any help will be greatly appreciated.

  Thank you!

  I was able to update the driver, thanks to you!

  So far, the system is not suspended yt or givng me a blue screen. I really hope that I won't get any more problem.

  Once again, thank you!

• Satellite A350 - blue screen with error message

  At the start of windows7, I get a blue screen with error message 0 x 0000116.

  Can someone help please?

  It looks like a graphics driver is a troublemaker. Try to reinstall a graphics driver in SafeMode (f8 at startup). Read this article for more information:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/eb584685-6b8b-4ad7-B6CC-ae5ee78095fb

  It is for VISTA but should be the same for win 7 too.

• Blue screen with error message

  Product name: HP Media Center M7250n desktop PC

  Product #ED842aa-aba

  I get a blue screen with error messages asking if this is the first time I get the error and then at the end it says: it is dumping memory. I would wipe my hard drive and reinstall XP but my system is out of warranty and HP gives me a recovery CD. What are my options.

  Hello

  If you are looking to purchase a set of recovery disc for your system, you can visit the site http://www.restoredisks.com/.

  NOTE: This site is not the HP website and it's a third-party site where they provide the recovery for different computer manufacturers disk (they charge for discs).

• my computer turns off, no code error, no blue screen

  my computer restarts auto no code error, no blue screen, it might be the drivers that I have installed or?  What can I do to solve this problem or found out how to solve this problem

  Hello Shelly,

  Drivers could easily be the cause - or it could be quite a few other things.

  I recommend a restore of the system to a restore point before you did what you did (when it was working fine).  If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  Good luck!

  Kosh

• HP Pavilion dv7-2160ed - blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  And I also noticed that some hardware is not installed to properliy:

  1 base system device:
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  Device base system 2:
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  3 base system device:
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  unknown device 1
  ACPI\ENE0100
  * ENE0100

  unknown device 2
  ACPI\HPQ0004
  * HPQ0004

  Can someone help me with this problem?

  Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.