script of root.sh in CRS (Grid Installation)

RDBMS version: 10.2.0.4.0, 11.2.0.2
Operating system: Solaris 5.10 SPARC

I have 2 questions about running root.sh were made at the end of the installation of CRS.

* 1 *. Which is the only task the more important than fact root.sh?

In my opinion: on the first node, root.sh Initialise the OCR.
On the remaining nodes, root.sh adds new nodes to the OCR. Would you guys agree with it?

* 2 *. Are there major differences between executions of root.sh 10.2.0.4.0 and 11.2.0.2

1.) is not a most important task. If something is missing to root.sh your cluster is not ready to go.
What is an OCR, if voting disks are not formatted and the cluster cannot communicate.
What is an OCR, if the interconnection of cluster has not been configured correctly.
What is an OCR, if services were not enrolled in inittab
etc.etc...

Especially in 10.2, since if the root.sh did not work on the last node, the cluster never had "fatal" mode, so all features of cluster actually wasn't there.

(2.) a lot...
a.) one difference is that now the root.sh calls a perl script, which can be rerun (rootcrs.pl) for the clusterconfiguration
(b) with 11.2.0.2, you can restart root.sh because root.sh now has control points.
(c.) to 11.2 should any more to run sequentally. After you run it on the first node, you can run it in parallel on all the nodes of rest.
(d.) now the root.sh on node already configures the cluster, all others root.sh do only an addNode...
e.) it configures ASM (has not done in 10.2)
f.) it creates a CSR (not nonexistent in point 10.2)
g.) it configures negotiators (new feature of 11.2)

These are just a few things...

Concerning
Sebastian

Tags: Database

Similar Questions

  • Oracle 11 g RAC 2: the problem of the script running root.sh

    People,

    Hello. I want to install Oracle 11 g RAC 2 with 2 Virtual Machines (rac1 and rac2 which BONES are Oracle Linux 5.6) VMPlayer and according to the tutorial

    http://appsdbaworkshop.blogspot.com/2011/10/11gr2-RAC-on-Linux-56-using-VMware.html

    I've been installing grid Infrastructure using runInstaller from step 1 to step 9/10 in rac1 and rac2 VM.

    Now, I run the root.sh script in VM rac1 and rac2 as below:


    [root@rac1 /] # /u01/app/grid/root.sh

    Output:

    ... ...

    CRS-4123: ohasd begins

    FATAL: Module not found oracleoks
    FATAL: Module not found oracleadvm
    FATAL: Module not found oracleacfs

    ACFS-9121: failure of /dev/asm/.asm_ctl_spec detection
    ACFS-9310: ADVM/ACFS installation failed.
    ACFS-9311: not all components were detected after installation

    ... ...

    'UpdateNodeList' succeeded.
    [root@rac1 /] #.




    [root@rac2 /] # /u01/app/grid/root.sh

    Output:

    ... ...

    CRS-4123: ohasd begins

    FATAL: Module not found oracleoks
    FATAL: Module not found oracleadvm
    FATAL: Module not found oracleacfs

    ACFS-9121: failure of /dev/asm/.asm_ctl_spec detection
    ACFS-9310: ADVM/ACFS installation failed.
    ACFS-9311: not all components were detected after installation

    ... ...

    Beginning of the resource 'ora.asm_init' failed.
    Cannot start the ASM.
    Failed to start Oracle Clusterware battery.
    [root@rac2 /] #.


    As seen the above output, rac1 and rac2 get the same problems. In addition, rac2 does not stack Clusterware and ASM. So, I have 2 questions:

    First of all, the common problem for rac1 and rac2:

    (1) "oracleoks, oracleadvm, oracleacfs" module not found
    2)/dev/ASM/.asm_ctl_spec not detected
    (3) ADVM/ACFS installation failed

    These 3 factors affect grid and Installation of the database later? If so, how to solve these problems?

    Second, how to start Clusterware and ASM battery in rac2?


    Thank you.

    you have 2 options:

    1 OEL 5.6 comes with 2 nuclei, the original Red Hat and UEK Oracle, you can not use UEK

    or one I recommend:

    2. improve the grid Infrastructure,
    * 11.2.0.3.1 * (patch 13348650, released a month ago 1) supports ACF on UEK (starting with 2.6.32.200 IIRC)

  • root.sh failed during the installation of the grid to the CCR of Oracle11g R2

    Hello Oracle gurus

    I actually install the Oracle11g r2 RAC with suite post Articles...
    http://www.Oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnLinuxUsingNFS.php

    My environment:
    Linux Redhat5.5 64-bit
    Developing CARS Oracle11g r2 installation using 2 nodes

    cat/etc/hosts
    [root@aaarac1 ~] # cat/etc/hosts
    # Do not remove the next line, or various programs
    # requiring a network functionality will fail.
    127.0.0.1 localhost localhost.localdomain localhost
    : 1 localhost6.localdomain6 localhost6
    #Public
    10.106.1.246 aaarac1
    10.106.1.247 aaarac2
    #Private
    192.168.0.101 aaarac1-priv
    192.168.0.102 aaarac2-priv
    #Virtual
    10.106.1.251 aaarac1-vip
    10.106.1.252 aaarac2-vip
    # SCAN
    10.106.1.244 rac-scan
    #Nas
    10.106.1.246 nas1

    -----------------------------------------------------------------------------------


    [root@aaarac1 ~] # sh /u01/app/oraInventory/orainstRoot.sh
    Change the permissions of/u01/app/oraInventory.
    Addition of read, write permissions for the group.
    Removal of read, write, execute permissions for everyone.

    Changing groupname of/u01/app/oraInventory to oinstall.
    The execution of the script is complete.
    [root@aaarac1 ~] #.
    [root@aaarac1 ~] #.
    [root@aaarac1 ~] # sh /u01/app/11.2.0/grid/root.sh
    Run the script root.sh from Oracle 11 g...

    The following environment variables are defined as:
    ORACLE_OWNER = oracle
    ORACLE_HOME = /u01/app/11.2.0/grid

    Enter the full path of the local bin directory: [usr/local/bin]:
    Copying dbhome to usr...
    Copying oraenv to usr...
    Copying coraenv to usr...


    Creating/etc/oratab file...
    Entries will be added to the/etc/oratab file according to the needs of
    Assistant configuration database when a database is created
    Finished to turn the generic part of the root.sh script.
    Now root product-specific actions will be performed.
    2011-08-04 02:48:32: the analysis of the host name
    2011-08-04 02:48:32: verification of superuser privileges
    2011-08-04 02:48:32: user has superuser privileges
    The file of configuration settings using: /u01/app/11.2.0/grid/crs/install/crsconfig_params
    Create the trace directory
    ADD LOCAL MODE
    Creating OCR keys for the user "root", "root"... privgrp
    Successful operation.
    portfolio of root
    Cannot save the portfolio at /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/root
    root cert portfolio
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/root
    export certificate root
    ICP-02002: could not open the wallet. Check the password.
    portfolio for peer
    Cannot save the portfolio at /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer
    Pocket player profile
    Cannot save the portfolio at /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/prdr
    portfolio of PA
    Cannot save the portfolio at /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa
    portfolio peer keys
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer
    portfolio PA keys
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa
    cert request peer
    ICP-02002: could not open the wallet. Check the password.
    PA cert request
    ICP-02002: could not open the wallet. Check the password.
    CERT peer
    ICP-02002: could not open the wallet. Check the password.
    CERT PA
    ICP-02002: could not open the wallet. Check the password.
    peer TP root cert
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer
    CERT of profile TP root drive
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/prdr
    PA TP root cert
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa
    CERT of peers pa TP
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer
    CERT of peers PA TP
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa
    CERT of pa TP player profile
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/prdr
    profile peer player TP CERT
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/prdr
    CERT user peer
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer
    CERT user PA
    ICP-02003: unable to load the wallet at: /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/root/b64certificate.txt ' does not exist
    Cannot set permissions on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/root/b64certificate.txt: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/root/b64certificate.txt ' does not exist
    Cannot set property on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/root/b64certificate.txt: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer/cert.txt ' does not exist
    Cannot set permissions on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer/cert.txt: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer/cert.txt ' does not exist
    Cannot set property on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer/cert.txt: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer/cwallet.sso ' does not exist
    Cannot set permissions on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer/cwallet.sso: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer/cwallet.sso ' does not exist
    Cannot set property on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/peer/cwallet.sso: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/prdr/cwallet.sso ' does not exist
    Cannot set permissions on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/prdr/cwallet.sso: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/prdr/cwallet.sso ' does not exist
    Cannot set property on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/prdr/cwallet.sso: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa/cert.txt ' does not exist
    Cannot set permissions on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa/cert.txt: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa/cert.txt ' does not exist
    Cannot set property on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa/cert.txt: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa/cwallet.sso ' does not exist
    Cannot set permissions on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa/cwallet.sso: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa/cwallet.sso ' does not exist
    Cannot set property on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/pa/cwallet.sso: Inappropriate ioctl for device
    The path ' / u01/app/11.2.0/grid/gpnp/aaarac1/wallets/prdr/cwallet.sso ' does not exist
    Cannot set permissions on /u01/app/11.2.0/grid/gpnp/aaarac1/wallets/prdr/cwallet.sso: Inappropriate ioctl for device
    Errors occurred when negotiators portfolios/permissions property setting.
    Creating Oracle GPnP portfolios failed for aaarac1 to the /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 4130.
    [root@aaarac1 ~] #.


    Concerning
    Hitgon

    Thank you, Tom

    http://www.Oracle-base.com/forums/viewtopic.php?f=1&t=12840

    Concerning
    Hitesh gondalia

  • root.sh failed during the installation of RAC11.2g

    Dear,

    I try to install RAC 11.2 (version of the grid Infrastructure is 11.2.0.1) on both nodes of linux (OS version is 2.6.39 - 400.215.10.el5uek Oracle Linux 5.11)

    SELinux + Firewall is stopped, ASM works fine (listdisks and querydisk has my drives correctly), ping between two nodes on public and private IPs is OK, the hosts file, configured for good.

    Owner of the DSO is grid user, and this user is the same used during the installation of the grid infrastructure.

    # /sbin/modinfo oracleasm
filename:       /lib/modules/2.6.39-400.215.10.el5uek/kernel/drivers/block/oracleasm/oracleasm.ko
description:    Kernel driver backing the Generic Linux ASM Library.
author:         Joel Becker <[email protected]>
version:        2.0.8
license:        GPL
srcversion:     28484D2A43A6D981AAB9246
depends:        
vermagic:       2.6.39-400.215.10.el5uek SMP mod_unload modversions 
parm:           use_logical_block_size:Prefer logical block size over physical (Y=logical, N=physical [default]) (bool)

    Installation was fine, no errors or warnings until running root.sh, the result was:


    # /opt/app/grid/product/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...

The following environment variables are set as:
    ORACLE_OWNER= grid
    ORACLE_HOME=  /opt/app/grid/product/11.2.0/grid

Enter the full pathname of the local bin directory: [/usr/local/bin]: 
   Copying dbhome to /usr/local/bin ...
   Copying oraenv to /usr/local/bin ...
   Copying coraenv to /usr/local/bin ...


Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2015-04-20 17:06:03: Parsing the host name
2015-04-20 17:06:03: Checking for super user privileges
2015-04-20 17:06:03: User has super user privileges
Using configuration parameter file: /opt/app/grid/product/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE 
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
  root wallet
  root wallet cert
  root cert export
  peer wallet
  profile reader wallet
  pa wallet
  peer wallet keys
  pa wallet keys
  peer cert request
  pa cert request
  peer cert
  pa cert
  peer root cert TP
  profile reader root cert TP
  pa root cert TP
  peer pa cert TP
  pa peer cert TP
  profile reader pa cert TP
  profile reader peer cert TP
  peer user cert
  pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
acfsroot: ACFS-9301: ADVM/ACFS installation can not proceed:

acfsroot: ACFS-9302: No installation files found at /opt/app/grid/product/11.2.0/grid/install/usm/EL5/x86_64/2.6.18-8/2.6.18-8.el5uek-x86_64/bin.

CRS-2672: Attempting to start 'ora.gipcd' on 'node01'
CRS-2672: Attempting to start 'ora.mdnsd' on 'node01'
CRS-2676: Start of 'ora.gipcd' on 'node01' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'node01' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'node01'
CRS-2676: Start of 'ora.gpnpd' on 'node01' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'node01'
CRS-2676: Start of 'ora.cssdmonitor' on 'node01' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'node01'
CRS-2672: Attempting to start 'ora.diskmon' on 'node01'
CRS-2676: Start of 'ora.diskmon' on 'node01' succeeded
CRS-2676: Start of 'ora.cssd' on 'node01' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'node01'
CRS-2676: Start of 'ora.ctssd' on 'node01' succeeded

DiskGroup DATA creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15130: diskgroup "DATA" is being dismounted


Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/app/grid/product/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2673: Attempting to stop 'ora.asm' on 'node01'
CRS-2677: Stop of 'ora.asm' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'node01'
CRS-2677: Stop of 'ora.ctssd' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'node01'
CRS-2677: Stop of 'ora.cssdmonitor' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'node01'
CRS-2677: Stop of 'ora.cssd' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'node01'
CRS-2677: Stop of 'ora.gpnpd' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'node01'
CRS-2677: Stop of 'ora.gipcd' on 'node01' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'node01'
CRS-2677: Stop of 'ora.mdnsd' on 'node01' succeeded
Initial cluster configuration failed.  See /opt/app/grid/product/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_node01.log for details


    I found the rootcrs_node01.log file:

    2015-04-20 17:06:20: Removing "/etc/rc.d/rc3.d/S96ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc3.d/S96ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
2015-04-20 17:06:20: Failed to remove file: 
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc5.d/S96ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc5.d/S96ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
2015-04-20 17:06:20: Failed to remove file: 
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc0.d/K19ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc0.d/K19ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
2015-04-20 17:06:20: Failed to remove file: 
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc1.d/K19ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc1.d/K19ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
2015-04-20 17:06:20: Failed to remove file: 
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc2.d/K19ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc2.d/K19ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
2015-04-20 17:06:20: Failed to remove file: 
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc4.d/K19ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc4.d/K19ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
2015-04-20 17:06:20: Failed to remove file: 
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: Removing "/etc/rc.d/rc6.d/K19ohasd"
2015-04-20 17:06:20: Removing file /etc/rc.d/rc6.d/K19ohasd
2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2015-04-20 17:06:20: Failed to remove file: 
2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2015-04-20 17:06:20: The file ohasd has been successfully linked to the RC directories


    What did I miss?


    Kindly advice...

    Best regards

    Hello

    It seems some problems with the drive carrier

    Create DiskGroup DATA failed with the following message is displayed:

    ORA-15018: diskgroup cannot be created.

    ORA-15130: diskgroup 'DATA' is currently disassembled

    Check below link, seems a similar question:

    ASM error in root.sh createdisk

    Thank you

    Monowar

  • Oracle 11g Grid Installation Getting Stuck during the installation in VirtualBox

    Hello friends,

    I try to install Oracle 11 g grid in two of the nodes that I configured in VirtualBox with OEL6 as the operating system.

    I did all pre-installation tasks and was ready to install the package in the grid, but I'm stuck at somepoint (to be precise 65%, where the /u01/app/11.2.0/grid files must be moved to node 2). I have waited long, but it's not far at all.

    This, I tried three times but still no use.

    My System Configuration is:

    Windows 10 - 64 bit

    i5 - 4200M (4 CPUs) - 2.5 GHz

    8 GB RAM

    The Configuration of the VM:

    Base memory: 3GB

    Processor: 2 processors

    stuck.png

    Please help me with this.

    Thank you

    RT

    It would be mainly due to the firewall - disable them. Reference: Oracle 11 g R2 Grid Infrastructure installation stuck on 65%

  • what disk path is really being checked when grid installation fails with PRVF-9802?

    Update: apparently, it's a false warning, like '... we cannot thoroughly test all combinations of SAN/udev'.

    [grid@rac101: grid] $./runcluvfy.sh stage pre - crsinst - n, rac101, rac102, rac103 - asm - asmdev/dev/prod_ocr1p1, / dev/prod_ocr2p1

    Conducting due diligence to install cluster services

    ...

    Control devices of the ASM...

    ERROR: / dev/prod_ocr1p1

    Storage is not found

    ERROR: / dev/prod_ocr2p1

    Storage is not found

    Checking for shared devices...

    PRVF-5150: / dev/prod_ocr2p1 path is not a valid path on all nodes

    PRVF-5150: / dev/prod_ocr1p1 path is not a valid path on all nodes

    Attributes of UDev search drives ASM began...

    ERROR:

    PRVF-9802: try to get information node udev "rac102" failed

    ERROR:

    PRVF-9802: try to get information node udev "rac101" failed

    ERROR:

    PRVF-9802: try to get information node udev "rac103" failed

    Check failure of UDev attributes for ASM disks

    Devices to check for ASM failed

    ....

    [grid@rac101: grid] $ he 's/dev/prod *.

    BRW - rw - 1 grid asmadmin 252, 6 Nov 10:01 5 / dev/prod_ocr1

    BRW - rw - 1 grid asmadmin 252, 17 Nov 10:01 5 / dev/prod_ocr1p1

    BRW - rw - 1 grid asmadmin 252, 5 Nov 13 10:01 / dev/prod_ocr2

    BRW - rw - 1 grid asmadmin 252, 5 Nov 19 10:01 / dev/prod_ocr2p1

    BRW - rw - 1 grid asmadmin 252, 7 Nov 10:01 5 / dev/prod_ocr3

    BRW - rw - 1 grid asmadmin 252, 5 Nov 16 10:01 / dev/prod_ocr3p1

    BRW - rw - 1 grid asmadmin 252, 5 Nov 14 10:01 / dev/prod_vot1

    BRW - rw - 1 grid asmadmin 252, 5 Nov 21 10:01 / dev/prod_vot1p1

    BRW - rw - 1 grid asmadmin 252, 8 Nov 10:01 5 / dev/prod_vot2

    BRW - rw - 1 grid asmadmin 252, 5 Nov 18 10:01 / dev/prod_vot2p1

    BRW - rw - 1 grid asmadmin 252, 15 Nov 10:01 5 / dev/prod_vot3

    BRW - rw - 1 grid asmadmin 252, 20 Nov 10:01 5 / dev/prod_vot3p1

    ...

    [grid@rac101: grid] $ he 's/dev/map

    Total 0

    CRW - rw - 1 root root 10, Nov 5 236 control 10:01

    lrwxrwxrwx 1 root root 11 5 Nov 10:01--> FSSYSDB1... / FSSYSDB1

    lrwxrwxrwx 1 root root 11 5 Nov 10:01--> FSSYSDB2... / FSSYSDB2

    lrwxrwxrwx 1 root root 11 5 Nov 10:01--> FSSYSDB3... / FSSYSDB3

    lrwxrwxrwx 1 root root 11 5 Nov 10:01--> FSSYSDB4... / FSSYSDB4

    lrwxrwxrwx 1 root root 12 5 Nov 10:01--> FSSYSLOG1... / FSSYSLOG1

    lrwxrwxrwx 1 root root 12 5 Nov 10:01--> FSSYSLOG2... / FSSYSLOG2

    lrwxrwxrwx 1 root root 12 5 Nov 10:01--> FSSYSLOG3... / FSSYSLOG3

    lrwxrwxrwx 1 root root 12 6 Nov 10:47 prod_ocr1->... /prod_ocr1

    lrwxrwxrwx 1 root root 14 6 Nov 10:58--> prod_ocr1p1... /prod_ocr1p1

    lrwxrwxrwx 1 root root 12 6 Nov 10:47 prod_ocr2->... /prod_ocr2

    lrwxrwxrwx 1 root root 14 6 Nov 10:48-> prod_ocr2p1... /prod_ocr2p1

    lrwxrwxrwx 1 root root 12 6 Nov 10:48-> prod_ocr3... /prod_ocr3

    lrwxrwxrwx 1 root root 14 6 Nov 10:48-> prod_ocr3p1... /prod_ocr3p1

    lrwxrwxrwx 1 root root 12 5 Nov 10:01--> prod_vot1... /prod_vot1

    lrwxrwxrwx 1 root root 14 5 Nov 10:01--> prod_vot1p1... /prod_vot1p1

    lrwxrwxrwx 1 root root 12 5 Nov 10:01--> prod_vot2... /prod_vot2

    lrwxrwxrwx 1 root root 14 5 Nov 10:01--> prod_vot2p1... /prod_vot2p1

    lrwxrwxrwx 1 root root 12 5 Nov 10:01--> prod_vot3... /prod_vot3

    lrwxrwxrwx 1 root root 14 5 Nov 10:01--> prod_vot3p1... /prod_vot3p1

    lrwxrwxrwx 1 root root 7 5 Nov 10:01--> zero... DM - 2

    lrwxrwxrwx 1 root root 8 Nov 10:01 vg_01-lv_home--> 5... DM - 23

    lrwxrwxrwx 1 root root 7 Nov 10:01 vg_01-lv_root-> 5... DM - 0

    lrwxrwxrwx 1 root root 7 Nov 10:01 vg_01-lv_swap--> 5... DM - 1

    lrwxrwxrwx 1 root root 8 Nov 10:01 vg_01-lv_tmp--> 5... DM - 24

    lrwxrwxrwx 1 root root 8 Nov 10:01 vg_01-lv_u01--> 5... DM - 25

    lrwxrwxrwx 1 root root 8 Nov 10:01 vg_01-lv_var--> 5... DM - 22

    I have found no change in rules multipath.conf or udev that changes ownership here.  I have an alias records in my multipath.conf file, which is NOT readable by the user of network:

    ...

    {multichannel
    WWID 36000d310007cbd00000000000000002c
    alias prod_ocr1
    }
    {multichannel
    WWID 36000d310007cbd00000000000000002d
    alias prod_ocr2
    }
    {multichannel
    WWID 36000d310007cbd00000000000000002e
    alias prod_ocr3
    }

    Also tried to add a uid, gid, multipath.conf mode, but no diff.

    A ran kpartx - a/dev/prod_ocr {1 | 2 | 3} on all nodes. Started several times.

    ....

    [root@rac101: ~] # he 's/dev/oracleasm/discs.

    Total 0

    BRW - rw - 1 grid asmadmin 8, 240 5 Nov 10:01 FSSYSDB1

    BRW - rw - 1 grid asmadmin 8: 32 Nov 10:01 FSSYSDB2 5

    BRW - rw - 1 Grill asmadmin 65, 0 5 Nov 10:01 FSSYSDB3

    BRW - rw - 1 grid asmadmin 8, 48-5 Nov 10:01 FSSYSDB4

    BRW - rw - 1 Grill asmadmin 65, 128 5 Nov 10:01 FSSYSLOG1

    BRW - rw - 1 grid asmadmin 8, 64-5 Nov 10:01 FSSYSLOG2

    BRW - rw - 1 Grill asmadmin 65, 32 5 Nov 10:01 FSSYSLOG3

    BRW - rw - 1 grid asmadmin 8, 81-5 Nov 10:01 OCRVOTE1

    BRW - rw - 1 Grill asmadmin 65, 49-5 Nov 10:01 OCRVOTE2

    BRW - rw - 1 grid asmadmin 8, 97-5 Nov 10:01 OCRVOTE3

    BRW - rw - 1 Grill asmadmin 65, 65 5 Nov 10:01 OCRVOTE4

    BRW - rw - 1 grid asmadmin 8, 113 5 Nov 10:01 OCRVOTE5

    BRW - rw - 1 Grill asmadmin 65, 81-5 Nov 10:01 OCRVOTE6

    ....

    I did createdisk on all disks, and listdisk is compatible on all nodes:

    [root@rac103 ~] # oracleasm scandisks

    Reload from disk partitions: fact

    Cleaning up stale ASM disks...

    ASM disks scanning system...

    Instantiation of disk 'FSSYSDB2 '.

    Instantiation of disk 'FSSYSDB4 '.

    Instantiation of disk 'FSSYSLOG2 '.

    Instantiation of disk 'OCRVOTE1 '.

    Instantiation of disk 'OCRVOTE3 '.

    Instantiation of disk 'OCRVOTE5 '.

    Instantiation of disk 'FSSYSDB1 '.

    Instantiation of disk 'FSSYSLOG1 '.

    Instantiation of disk 'FSSYSDB3 '.

    Instantiation of disk 'OCRVOTE2 '.

    Instantiation of disk 'FSSYSLOG3 '.

    Instantiation of disk 'OCRVOTE4 '.

    Instantiation of disk 'OCRVOTE6 '.

    ....

    [root@rac101: ~] # oracleasm deletedisk - v/dev/prod_ocr1p1

    Disk "OCRVOTE1" is a valid ASM disk

    Header of drive compensation: oracleasm-writing-label: could not open device ' / dev/oracleasm/disks/OCRVOTE1 ': device or resource busy

    has failed

    Impossible to erase the disk 'OCRVOTE1 '.

    ...

    [root@rac101: ~] # oracleasm OCRVOTE1/dev/prod_ocr1p1 createdisk

    Device "/ dev/prod_ocr1p1" is already tagged for disc ASM 'OCRVOTE1 '.

    ....

    My udev rules are quite simple and readable by the user of network:

    [grid@rac101: grid] $ cat /etc/udev/rules.d/20-UEKasm-oracle.rules

    ENV {nom_DM} == "FSSYSDB?", NAME: = "%E {nom_DM}", OWNER: = "grid", GROUP: = "asmadmin", MODE: = "660".

    ENV {nom_DM} is "FSSYSDB? p? ", NAME: ="%E {nom_DM}", OWNER: ="grid", GROUP: ="asmadmin", MODE: ="660 ".

    ENV {nom_DM} == "FSSYSLOG?", NAME: = "%E {nom_DM}", OWNER: = "grid", GROUP: = "asmadmin", MODE: = "660".

    ENV {nom_DM} is "FSSYSLOG? p? ", NAME: ="%E {nom_DM}", OWNER: ="grid", GROUP: ="asmadmin", MODE: ="660 ".

    ENV {nom_DM} == "prod_ocr?", NAME: = "%E {nom_DM}", OWNER: = "grid", GROUP: = "asmadmin", MODE: = "660".

    ENV {nom_DM} is "prod_ocr? p? ", NAME: ="%E {nom_DM}", OWNER: ="grid", GROUP: ="asmadmin", MODE: ="660 ".

    ENV {nom_DM} == "prod_vot?", NAME: = "%E {nom_DM}", OWNER: = "grid", GROUP: = "asmadmin", MODE: = "660".

    ENV {nom_DM} is "prod_vot? p? ", NAME: ="%E {nom_DM}", OWNER: ="grid", GROUP: ="asmadmin", MODE: ="660 ".

    What did I wrong? Thanks in advance.

    In addition, changed paths drive going on and still fails!

    [grid@rac101: grid] $./runcluvfy.sh stage pre - crsinst - n, rac101, rac102, rac103 - asm - asmdev/dev/oracleasm/disks/OCRVOTE1, / dev/oracleasm/disks/OCRVOTE2

    ....

    Control devices of the ASM...

    Checking for shared devices...

    Peripheral device type

    ------------------------------------  ------------------------

    / dev/oracleasm/Disks/OCRVOTE2 disk

    / dev/oracleasm/Disks/OCRVOTE1 disk

    Consistency check of the owner of the device on all nodes...

    Check the consistency of the owner of the device for ' / dev/oracleasm/disks/OCRVOTE1 ' PASSED

    Check the consistency of the owner of the device for ' / dev/oracleasm/disks/OCRVOTE2 ' PASSED

    Checking consistency of the set of instruments through all nodes...

    Check the consistency of a set of instruments for ' / dev/oracleasm/disks/OCRVOTE1 ' PASSED

    Check the consistency of a set of instruments for ' / dev/oracleasm/disks/OCRVOTE2 ' PASSED

    Consistency check permissions of device on all nodes...

    Check the consistency of the device permissions for ' / dev/oracleasm/disks/OCRVOTE1 ' PASSED

    Check the consistency of the device permissions for ' / dev/oracleasm/disks/OCRVOTE2 ' PASSED

    Consistency check of the size of the unit on all nodes...

    Check the consistency of the size of the unit to ' / dev/oracleasm/disks/OCRVOTE1 ' PASSED

    Check the consistency of the size of the unit to ' / dev/oracleasm/disks/OCRVOTE2 ' PASSED

    Attributes of UDev search drives ASM began...

    ERROR:

    PRVF-9802: try to get information node udev "rac102" failed

    ERROR:

    PRVF-9802: try to get information node udev "rac101" failed

    ERROR:

    PRVF-9802: try to get information node udev "rac103" failed

    Check failure of UDev attributes for ASM disks

    Devices to check for ASM spent

    ...

    Post edited by: user10501000

    ... so we ignored the error and it installed fine.

  • Script or command to determine the ESX installation date

    Hello

    I was responsible for getting the date of installation of each ESX host in my infrastructure. Y at - it a script or the cmdlet that is used to determine this information. I have looked around, but discovered nothing. Any help is greatly appreciated.

    G

    As I know there is no property that gives you the installdate.

    There are alternatives, but all do not give a solution that will always return the correct date.

    I prefer to look for the oldest statistical data for the host

    -This requires that statistical data are retained indefinitely

    -If the host has not added to the vCenter immediately after installation, the returned date might be off significantly.

    -due to a bug in the cmdlet Get-Stat, I use the QueryPerf method instead of the cmdlet Get-Stat

    $esx = Get-VMHost MyEsx $perfMgr = Get-View (Get-View ServiceInstance).content.perfManager
$spec = New-Object VMware.Vim.PerfQuerySpec $spec.StartTime = (Get-Date).AddYears(-2)
$spec.Entity = $esx.ExtensionData.MoRef
$metric = New-Object VMware.Vim.PerfMetricId $metric.counterId = 2 $metric.instance = "" $spec.MetricId += $metric $stats = $perfMgr.QueryPerf($spec)

Write-Host $stats[0].SampleInfo[0].Timestamp

    The script assumes that it must be less than 2 years since the host was installed, but you can easily change that by changing the setting to the AddYears method.

  • 11.2.0.3 grid Installation fails during verification of the NTP

    I want to install Oracle on RedHat 5.5 11.2.0.3
    My Installation seems to be failing when the next NTP check. However, each host in the cluster run NTP with x - option (for orientation of time).
    ntpd - x u ntp:ntp Pei /var/run/ntpd.pid


    INFO: *********************************************
    NEWS: Protocol NTP (Network Time): this task checks the synchronization schedule cluster on clusters that use the Protocol NTP (Network Time).
    INFO: Severity: CRITICAL
    INFO: OverallStatus:VERIFICATION_FAILED
    INFO: -----------------------------------------------

    I crossed the /etc/ntp.conf and etc/init.d/ntpd, and they are the same on all nodes of the cluster. I don't know what I'm missing here.
    Any help would be appreciated.

    Thank you

    Hello

    right 11 GR 2 requires no ntp server (although always recommended).

    Unfortunately the check-in facility, do not see if NTP is running, but will also look for/etc/ntp.conf. So in addition to kill and by disabling the ntp, you must rename/etc/ntpd.conf.

    Sebastian

  • Control of grid installation Questions

    Start planning for Grid Control install to manage multiple test databases. All databases work on x 86-64 RHEL 4 and oracle 10.2.0.4. Have a new Windows 2003 server running eVision CARD server software available for the drafting of reports, which is mainly used during normal office hours. Nothing else will work on this server. I intend to install the Grid control for servers in database of test on the Windows machine. If successful, I have a similar server I'll install the production control Grid. Two questions: 1. any reason why the control grid can not share a server with other software? and 2. Should I install control grid of 10g or 11g? Grid control is compatible with lower versions? We are planning to upgrade to db 11 GR 1 material later this year.

    Thank you
    Curt Swartzlander
    S/N

    Ozark DBA wrote:
    Anurag

    Do you know if 10g Grid Control monitors a database 11g as well? It seems that 10g Release 5 is the latest version of the grid. Now I can not find download 11g grid.

    Hello

    Yes 10g grid control can monitor 11 g databases.

    Concerning
    Anurag

  • error in one of the scripts of mover of data during the installation of campus solution

    Hello world
    This is my first attempt to install one of the products of peoplesoft
    I install HCM 9.0 on windows 2008 64-bit, oracle 11g
    I am now in task called a 7-16-9: PeopleTools system data update
    I ran pt849tls.dms with success
    but pt850tls.dms failed with the error:

    File: Data error MoverSQL. Stmt #: 0 error Position: 25 back: 904 - ORA-00904: "PT_RETENTIONDAYS": invalid identifier
    Failure of SQL stmt:UPDATE PS_PRCSSYSTEM SET PT_RETENTIONDAYS = RETENTIONDAYS
    Error: Error execute SQL for UPDATE PS_PRCSSYSTEM SET PT_RETENTIONDAYS = RETENTIONDAYS

    Is there a script that I missed?
    I followed the instructions step by step
    Thanks for your help,

    Did you run the sql script generated by the generation of project successfully (it is not rel849un.sql and rel850un.sql either)?

    Nicolas.

    Published by: Gasparotto N on April 12, 2010 11:36

  • Failed to start oracle-ohasd, error: ioctl inappropriate for the ohasd device was able to start to roothas.pl

    Hello

    I am trying to install the Oracle 11.2.0.1 on Oracle Linux 7.0 database 64-bit deployed on VirtualBox. I'll put up a single on making ASM instance database so the grid on a stand-alone server installation. I launched the installer of grid with YES. When I run the script from root

    /U01/app/grid/product/11.2.0/grid/root.sh

    I get the following error:

    Default: no such file or directory for the command/sbin/initctl start oracle-ohasd

    Failed to start oracle-ohasd, error: Inappropriate ioctl for device

    ohasd could not start: ioctl inappropriate for this device, /u01/app/grid/product/11.2.0/grid/crs/install/roothas.pl line 296

    After installing Oracle Linux 7.0 there is no/etc/init and also no/sbin/initctl created automatically under Linux. I don't know if these directories need to be created automatically or not?

    I googled this problem. Most of the solutions is like this:

    """"""""""""""""""""""""""""""""""""""""""""""

    Hello

    Problem is indeed due to the incompatibility of the upstart/init. Here are the average working:

    1) proceed with the installation as usual until root.sh invocation.

    (2) prior to root.sh edition $GRID_HOME/crs/install/s_crsconfig_lib.pm, go to line 1173 (you should find a code like: if ($srv eq 'ohasd') {# OHASD Start).

    (3) insert a following code snippet before starting the game OHASD (line 1173)

    My $UPSTART_OHASD_SERVICE = 'oracle-ohasd. "

    My $INITCTL = "/ sbin/initctl;

    ($status, @output) = system_cmd_capture ("$INITCTL start $UPSTART_OHASD_SERVICE");

    If (0! = $status)

    {

    error ("' cannot start $UPSTART_OHASD_SERVICE, error: $! '");

    return $FAILED;

    }

    (4) create a file /etc/init/oracle-ohasd.conf with the following content inside

    # Start OHASD oracle

    start the runlevel [35]

    Stop the runlevel [. 35]

    respawn

    exec /etc/init.d/init.ohasd run > / dev/null 2 > & 1 </dev/null

    (5) call root.sh

    (6) complete the installation.

    If you have already run root.sh (unsuccessfully), simply roll back:

    $GRID_HOME/crs/install/roothas.pl - deconfig - force - verbose

    Make changes above and continue.

    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

    The part above is not the solution!

    How to solve the problem?

    Thank you!!!

    11.2.0.1 is not supported on RHEL7, even on RHEL6, you must install at least 11.2.0.3.

    You can see the matrix certification Oracle Support for Linux look at this document: master Note Linux OS requirements for database server (Doc ID 851598.1)

    Kind regards

    Oscar

  • accidentally ran root.sh as installation of cluster grid in node 2. Now, node 1 has + ASM2 instance and node 2 has + ASM1

    Version of the OS is redhat 5

    Network cluster version is 11.2.0.4.2.

    I accidentally fell root.sh as cluster grid facility in node 2. Now, node 1 has + ASM2 instance and node 2 has + ASM1.

    I bet that node 1 is not the primary node now. How to fix this?

    Urgent help please. I have to go forward to the installation of the db.  It is a prod environment.

    Appreciate your help.

    Hello

    Unconfigure and reconfigure the clusterware.

    as root

    (1) ' $GRID_HOME/crs/install/rootcrs.pl - deconfig-force "on Node2

    (2) "$GRID_HOME/crs/install/rootcrs.pl - deconfig - force - lastnode" on node1

    (3) run root.sh on node1

    (4) run root.sh on node2

    See you soon,.

    Krisz

  • I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

    I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

    It's my environment:

    VM VirtualBox

    OS: Linux to Oracle 7

    RAM: 2G

    CPU: 1 outlet | 2 carrots

    OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.

    Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure

    Installation type: SServer tandalone.

    The installation user: uid = 501 (oracle)

    installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.

    Put ASM implementation with Linux e/s Standard (No. ASMLib).


    The virtual machine has 3 disks attached.


    Features: / dev/sdb, / dev/sdc, / dev/sdd


    I ran to related records:


    # / bin / / dev/raw/raw1 gross/dev/sdb1

    # / bin / / dev/raw/raw2 gross/dev/sdc1

    # / bin / / dev/raw/raw3 gross/dev/sdd1


    # raw - qa

    / dev/RAW/raw1: linked main 8, minor 17

    / dev/RAW/raw2: linked main 8, minor 33

    / dev/RAW/raw3: linked main 8, minor 49


    Also, I have configured the following command to set permanent configuration:

    #vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules

    ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".

    ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".

    ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".

    # set permissions on these discs for the owner of the Oracle user.

    ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "


    NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.


    BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb

    BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1

    BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc

    BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1

    BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd

    BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1


    This happens whenever I restart the server.


    But authorities are good when I run # ls - lrt/dev/raw/raw *.


    CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl

    CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1

    CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2

    CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3


    Problem: when running script $GRID_HOME/root.sh.

    Adding Clusterware entries to inittab

    ohasd could not start

    Cannot start the Clusterware. Last 20 lines of the trace log alert:

    2015 08-19 02:15:24.442:

    [client (7260)] CRS-2101: the RSC has been formatted using version 3.

    2015 08-19 02:15:28.238:

    [client (7283)] CRS-1001: the OCR has been formatted using version 3.

    ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4

    failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install

    Please help me.

    Geraldo Peralta

    Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931

    Under the Options deprecated for Oracle RAC 11 g Release 2:

    "Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »

    Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/

    HTH,
    Brian

  • OCP Studies - installation of Infrastructure of grid for ASM - Pt 2 Please Help

    You all have been great so far, I've had this problem for a few days and tried to fix it without success. I pray that you all can help me. I try to install the grid Infrastructure. In the Setup program, there are two scripts that must be run. One runs great, the second root.sh does not work. It is the newspaper of the root.sh script:

    [grid root@mytest] #./root.sh

    Running Oracle 11 g root script...

    The following environment variables are defined as:

    ORACLE_OWNER = oracle

    ORACLE_HOME = / home/mytestapp/oracle/grid

    Enter the full path of the local bin directory: [/ usr/local/bin]:

    Copying dbhome to usr...

    Copying oraenv to usr...

    Copying coraenv to usr...

    Creating/etc/oratab file...

    Entries will be added to the/etc/oratab file according to the needs of

    Assistant configuration database when a database is created

    Finished to turn the generic part of the script in root.

    Now root product-specific actions will be performed.

    Using the settings configuration file: / home/mytestapp/oracle/grid/src/install/crsconfig_params

    Create the trace directory

    ADD LOCAL MODE

    Creating OCR keys for the user 'oracle', privgrp 'oinstall '...

    Successful operation.

    LOCAL ONLY MODE

    Successfully accumulated necessary OCR keys.

    Creating OCR keys for the user "root", "root"... privgrp

    Successful operation.

    CRS-4664: node mytest pinned successfully.

    Adding to inittab demon

    ohasd could not start

    Cannot start the Clusterware. Last 20 lines of the trace log alert:

    2014-06-29 13:46:27.533

    [client (6031)] CRS-2101: the RSC has been formatted using version 3.

    2014-06-29 13:46:29.371

    [client (6055)] CRS-1001: OCR has been formatted using version 3.

    [client (6091)] CRS - 10001:CRS - 6021: no msg for no: crs-6021 [l] [unlimited]

    ohasd could start to /home/mytestapp/oracle/grid/crs/install/roothas.pl line 325.

    / Home/mytestapp/Oracle/Grid/perl/bin/perl-I/home/mytestapp/oracle/grid/perl/lib-I/home/mytestapp/oracle/grid/src/install failed running /home/mytestapp/oracle/grid/crs/install/roothas.pl

    When I'm adding inittab demon, it hangs for about 2 to 3 minutes then it goes down and im not sure why, all please help me

    Thank you very much

    Hey you guys,

    Thanks, I thought of her late last night. After a lot of research and to see pieces everywhere, I went to the Oracle Documentation and to make my OS was not compatiable with the version of the grid Infrastructure. I have been using Linux 5.2 and I used 11.2.0.2. I decideed to do a new installation with Linux 6.5 and 11.2.0.3 it worked like a charm. Once again thank you for everything you do!

  • Installation of the Infrastructure of grid and patchwork of power supply

    Version of the GRID: 11.2.0.3, 11.2.0.2
    Platform: AIX 6.1

    Found a similair in a spiral position in OTN on. But couldn't find the answer here; That is why this announcement

    We install the grid using the GUI installation program grid. When you perform a new installation of the Infrastructure of grid 11.2.0.2 or 11.2.0.3 in a new server, I want to apply its latest PSU as well. When should I do this task PSU?
    A. Should I apply the GI PSU after the entire Grid installation is successfully completed ?
or
B. Should I apply the GI PSU just before running the root.sh ?
      ie. when the installer prompts you to run root.sh (see the screenshot below)
            http://husnusensoy.files.wordpress.com/2009/10/camtasiastudio351.png
      At this stage(before running root.sh) the GI binaries are in place . So , I can apply the PSU on these binaries? Right?
    Should I follow option A or B above?

    Hello

    Should a. I apply the PSU IM after the installation of the grid ends successfully?

    Yes, you must complete the successful installation and after apply PSU

    B. can I apply the PSU im just before you run the root.sh?
    That is to say. When the installation program prompts to run root.sh (see the screenshot below)
    http://husnusensoy.files.WordPress.com/2009/10/camtasiastudio351.PNG
    At this point (before you run the root.sh script) GI binaries are in place. So, can I apply the power supply on these binaries? Right?

    Yes, you must complete (close) runInstaller after root.sh, so you can ask the PSU, because if you start with YES opatch (runInstaller) runs the inventory will be locked.

    Also, you have an opportunity to decide if you want to use the software upgrades during the Installation.

    YES can install updates patch reviews, requirements system updates (hardware, operating system settings and packages of core) for the operating systems supported and other important updates that can help ensure that your installation is going smoothly. Oracle recommends that you enable the software updates during the installation.

    If you choose to enable the software updates, and then during installation you must provide valid My Oracle Support username and password during installation, so that YES can download the latest updates, or you must provide a path to the location of a software updates package you downloaded previously.

    If you plan to run the installation in a secure data center, so you can download updates before you start the installation by starting YES on a system that has Internet access to download update mode. To start YES to download updates, enter the following command:

    $ ./runInstaller -downloadUpdates

    Provide My Oracle Support user name and password and provide the parameters of the proxy if necessary. After downloading the updates, transfer the update file to a directory on the server where you plan to run the installation.

    Kind regards
    Levi Pereira

Maybe you are looking for

  • V5 - 573 leaves g USB port not recognize devices

    Hy. my USB port left I does not. It's loaded, but not to recognize the devices. tried it with the mouse, usb, external hard drive, flash drive all numb. but the power is there. I see the light on the external hard drive if pluged in. any suggestions?

  • I get a RunDLL error when I start my computer

    Original title: performance DLL I get a RunDLL error when I start my computer.  It happened for 5 days now.  The error that says: There was a problem starting C:\Users\Nathan\AppData\Local\Temp\AxIndmin.dll The specified module could not be found

  • Updated spell checking to update for Windows Mail

    Please tell me if there is a checker set to update to version 6 from Windows Mail.  I would like to than the one that is included in MS Word, which will highlight the words that are misspelled as I type and will be good self.  When replying, please s

  • blink crusor abnormally when I open Word 2007

    blink crusor abnormally when I open Word 2007

  • my windows Defender does not work...

    my windows defender is not opening at all. something of "error code: 0x80070005" is coming. If someone please give me a good suggestion...