Script to save the file and close without user Interaction

Similar Questions

• Error message: to restore enough memory for programs running, save the file and then close or restart all programs

  It said "restore enough memory for programs to operate correctly, save the file and then close or restart all open programs".

  I changed the size of paging and says always the same, I have 1.5 GB free RAM, but don't know how to find or what to do 'virtual memory '.  Have windows 7.

  I started the safemode and run also memory dignostics and nothing found, please help, cannot afford to take a shop or get a new computer, I'm using another pc.

  I was recommended to download and. Run 'hitmanpro3'... but if anyone has had this problem and solved it or know how, please help!

  Thank you

  Hello

  Please contact Microsoft Community.

  I understand that you receive an error related to the lack of virtual memory. This error message appears when running any program that requires more memory your computer has, or running in the background, Windows manages the system memory by saving the data between physical memory and virtual memory. In order to help you better, please provide us with the following information:

  What is the brand and model of your computer?

  I suggest you follow the methods and check them off below if this solves the problem.

  Method 1: Clean boot

  A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can determine what elements of the normal starting procedure problems.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the clean boot, follow the section How do I reset the computer to start as usual after a clean boot troubleshooting under more information in the article to put your computer to normal startup.

  Method 2: Prevention of insufficient memory problems

  Follow the steps mentioned in the link and the check, it solves the problem. Follow the evolution of the size of the virtual memory section

  http://Windows.Microsoft.com/en-us/Windows/preventing-low-memory-problems#1TC=Windows-7

  Method 3: Virus Scan

  Microsoft Safety Scanner is a free burner that can be used to analyze a system for computer viruses and other forms of malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information: Windows optimize for better performance

  Hope this information helps. Response with status so that we can help you.

• Save jpeg files and close script

  Hi all

  I am very new to scripting (from this morning) and struggling to get my head round if the following is possible. My apologies if I'm missing something basic.

  I wish I could have a script that opens a jpeg image, insert the name of the file on the image, save as a jpeg and close.

  I managed to find examples of this and currently have a script that will open the image, insert the name of the file and save the file - but as a photoshop document. I am also very keen on the images I need to process about 200 images in a closing time and and at present can do a little at a time.

  I inserted what I have so far below... Any help would be appreciated.

  /*

  Description:

  This script is a script of model that will

  open and process a folder of images

  */

  turn on double click of the

  Macintosh Finder or Windows Explorer

  #target photoshop

  Make Photoshop the frontmost application

  where we double clicked on the file

  app.bringToFront ();

  ///////////////////////////

  SET - UP.

  ///////////////////////////

  A list of file extensions to ignore, keep them lower case

  gFilesToSkip = Array ("db", "xmp", "thm", 'txt', 'doc', 'md0', "tb0", "adobebridgedb", "adobebridgedbt", "bc", "bct");

  POPs open a dialog box to the user of

  Select the documents folder to process

  var inputFolder is Folder.selectDialog ("select a folder of documents to process");.

  ///////////////////////

  HAND / /.

  //////////////////////

  Open a folder of Images

  OpenFolder();

  display the path to a folder on exit

  Alert (outputFolder);

  ///////////////////////////

  FUNCTIONS.

  ///////////////////////////

  Given to open a folder of files,

  function {OpenFolder()

  var filesOpened = 0;

  List of files of the var = inputFolder.getFiles ();

  for (var i = 0; i < fileList.length; i ++) {}

  Make sure that all the files in the folder are compatible with PS

  If (instanceof file in the list of files [i] & &! .hidden fileList [i] & &!) IsFileOneOfThese (list of files [i], gFilesToSkip)) {}

  Open (fileList [i]);

  filesOpened ++;

  /////////////////////////////////////

  Put all your processing functions....

  /////////////////////////////////////

  var originalUnits = app.preferences.rulerUnits

  app.preferences.rulerUnits = Units.PIXELS

  app.foregroundColor.rgb.red = 255

  app.foregroundColor.rgb.green = 255

  app.foregroundColor.rgb.blue = 255

  Add the position of pixels for the left side of your block of text below

  var textLeftPosition = 260

  Add pixels to the bottom of your block of text below post

  var textBottomPosition = 260

  var typeLayer = app.activeDocument.artLayers.add ();

  typeLayer.name = app.activeDocument.name;

  typeLayer.kind = LayerKind.TEXT;

  typeLayer.textItem.size = 48;

  typeLayer.textItem.position = [textLeftPosition, textBottomPosition];

  var NomCouche = typeLayer.name

  typeLayer.textItem.contents = NomCouche;

  app.activeDocument.close (SaveOptions.SAVECHANGES);

  }

  ////////////////////////////////////////////

  .. .in the area between these two comments. //

  ////////////////////////////////////////////

  }

  }

  given a file name and a list of extensions

  determine if this file is in the list of extensions

  function IsFileOneOfThese (inFileName, inArrayOfFileExtensions) {}

  var lastDot = inFileName.toString () .lastIndexOf ('. ');

  If (lastDot ==-1) {}

  Returns false;

  }

  var strLength = inFileName.toString () .length;

  var extension = inFileName.toString () .substr (lastDot + 1, strLength - lastDot);

  extension = extension.toLowerCase ();

  for (var i = 0; i < inArrayOfFileExtensions.length; i ++) {}

  If (extension == inArrayOfFileExtensions [i]) {}

  Returns true;

  }

  }

  Returns false;

  }

  All you need to do is create a small script to add a text layer.  Then record a script uses action.   The action by using the file menu, you can batch > Scripts > image processor.  In the dialog box image processor that it points to a folder that contains your source image files. They can be jpg or any other type of image file that is supported by Photoshop. Point to a folder to save the jpg files.  Set it to save file JPG (a resizing option settings). Point it at your action game and the text by adding the action.

  

• Save the files and format the hard drive?

  I have a MacBook 2012 mid pro and the hard drive fills up with data and applications, I don't want anymore. So I want just to format the drive and install a fresh OS x and only the applications and the data I need. Is it possible to just copy the folders with the data I want to save... on an external drive?... like music, movies, Documents... then format my internal drive and load El Capitan. When can I then copy these files on the original drive and have things work the same or improve skills?... when using Photos and iTunes and iMovie? I do not use Time Capsule... cause he will restore a bunch of stuff I don't want. Has any tried this? or have better ideas?

  Yes, you can if you wish. Don't forget some features such as the preferences settings will be not recorded, unless you know where to look.  As for iTunes and Photos you must register the complete library of media files.

• Finder - how to display all THE files and folder without exception names in searches?

  I like Mac OS.  I can't WAIT finder.  I just want that he show me everything that matches my search string - files, folders, images, etc.  Each of them, everywhere on my machine.  I just want it to be simple.  Or point me to a good replacement for Finder program.  I waste so much time trying to find things that should take a simple search...  I looked at all the stupid shortcuts like Shift + Cmd + G, which can't find folders in the directory you are in (why would it be separated anyway?).

  Thank you

  CMD-SHIFT-g is quite a search function. It allows you to enter the path of the folder you want to open. What you think "seeks" the current folder is really thin path. If you enter no previous path information, it looks in the current working directory to the folder name you typed in the dialog box.

  You can set the default search starting location in Finder preferences. I have mine for current folder. Looks like you might prefer "search this Mac".

  

  Typing in the search field in the Finder will search the contents and filename. It will offer to search for chips to match types he concludes.

  If you just want to search for files and folders, but no content file, then use cmd-ctrl-shift-f to search by name (you can adjust this shortcut to the system preferences keyboard).

  If you don't get the results of your research, then perhaps your Spotlight index is corrupt.

  Featured: how re-indexing of folders or volumes - Apple Support

  If this does not work for you, try to find any fileor EasyFind

• Just updated to Firefox 8. Now, when I close firefox with several active tabs, it didn't offer not an option 'Save the tabs and close', how can I return this option?

  I looked in the 'Options' and I can't find a way to toggle this switch. I hope that this feature has not disappeared, because I use it all the time.

  Versions of Firefox 4 + automatically record your session when you close Firefox. To restore your previous session click on the link of the Previous Session restoration on the subject: Home Home page or in the history menu.

• In some websites, I don't have the option to display something. I have to save the file and then look it up.

  An example is the site of my bike club. When I click on 'View', instead of being able to view the item, I can record it only. On IE I can see so save it. Is there a setting I need to change or is it a function of virus protection?

  I'm not registered, so probably, I don't see the content of problem... What did you try to view? If it is an executable file, Firefox will not have the option 'open '. This is a safety feature. However, most content of the web site is not executable, so it could be a problem with the way the site is coded (this isn't inform Firefox in the usual way from the nature of the content).

• Save the file and open it

  hey im trying to write and read from a file, but I don't know what I'm doig wrong please help

  This is the handwriting

     FILE* f= fopen( "data/t.txt", "w" );
                      if(f==NULL){
                                   fprintf(stderr,"Cannot create output.txt\n");
                                   exit(1);
                                 }
                           fprintf(f,"%s",str);
                                 fprintf(f,"%i",num);
  

  and read

  h= fopen( "data/t.txt", "r+" );
      if(h==NULL){
          h=fopen("data/t.txt","a");
                  if(h==NULL){
                                           fprintf(stderr,"Cannot open t.txt in r+\n");
                                           exit(1);
                                         }
      }
                  else while( fread( &r.name, sizeof( r.name ), 1, h  )!=0){
  
             fscanf( h,"%s",&str  );
  

  Of course, I was wrong about the deletion of data-------.

  This code works perfectly fine - just tested:

     char str[] = "test";
      int num = 1;
      FILE* f= fopen( "data/t.txt", "w" );
      if(f==NULL){
          fprintf(stderr,"Cannot create output.txt\n");
          exit(1);
      }
      fprintf(f,"%s",str);
      fprintf(f,"%i",num);
      fclose(f);
  

• When downloading using firefox I should save the download, and then must go to the download file to start the download. When I download using internet explore I can run a download at the time where as it is downloaded. Can I change a setting somewhere?

  I use Windows 7 with firefox as my default browser. When I download a program using firefox, I wonder if I want to save the file, and then must go to the download folder to start the download. When I download using internet explorer, I gives me the ability to run the download at the time where it is downloaded instead of save the download. Is there a setting I can change to allow me to run downloads when using firefox instead of record?

  Hi shortwedge3,

  You can use the OpenDownload2 extension for the run option when downloading files with Firefox

• Save the file with the same name

  How to change the script to save the file with the same name?

  
  

  
  
  
  
  //SaveforWebSP.jsx  
  
  
  
  //Save a fixed width image with a size constraint in its original folder  
  
  
   
   
  
  
  
  var docRef = activeDocument;  
  
  
  
  var outputFolder = docRef.path;  
  
  
   
   
  
  
  
  NamesaveRef = new File( outputFolder + "/reference.jpg" );  
  
  
  
  var NewfileRef = new File( NamesaveRef )  
  
  
   
   
  
  
  
  // quality/size constraints  
  
  
  
  var w = 1920; // new file width  
  
  
  
  var MaxSz =  361440; // max. 360Kb  
  
  
  
  var Qlt = 100; // initial quality 100  
  
  
  
  var x = 1; // decreasing step  
  
  
   
   
  
  
  
  // resize the image to the right width  
  
  
  
  docRef.resizeImage(UnitValue(w,"px"),null,100,ResampleMethod.BICUBICSHARPER);  
  
  
   
   
  
  
  
  // Perform the first SaveForWeb Operation  
  
  
  
  ExpWeb(NewfileRef, Qlt);  
  
  
   
   
  
  
  
  // Keep trying to save the file with max. Qlt, but under MaxSz 
   
  
  
  
  while (NewfileRef.length > MaxSz)  
  
  
  
  {  
  
  
        
  Qlt = Qlt - x;  
  
  
        
  NewfileRef = new File( NewfileRef );
   
  
  
        
  NewfileRef.remove();  
  
  
        
  ExpWeb(NewfileRef, Qlt);  // Perform a new SaveForWeb Operation, with slightly lower Qlt  
  
  
           
  if (Qlt <= 40) {  
  
  
             
  alert("The file can't be saved with the desired size AND quality.");  
  
  
             
  break  // break the loop whenever the quality is as low as 50 (this shouldn't need to happen)  
  
  
           
  }  
  
  
  
  }  
  
  
   
   
  
  
  
  var FileSz = NewfileRef.length/1024;  
  
  
  
  FileSz = Math.round(FileSz);  
  
  
   
   
  
  
  
  // close the original file without saving  
  
  
  
  activeDocument.close(SaveOptions.DONOTSAVECHANGES);  
  
  
   
   
  
  
  
  // SaveForWeb Export, with the desired constraints and parameters  
  
  
  
  function ExpWeb(FileNm, Qlt)  
  
  
  
  {  
  
  
        
  var options = new ExportOptionsSaveForWeb();  
  
  
        
  options.quality = Qlt;   // Start with highest quality (biggest file).  
  
  
        
  options.format = SaveDocumentType.JPEG;   // Save Format for the file  
  
  
        
  docRef.exportDocument(File(FileNm), ExportType.SAVEFORWEB, options);  
  
  
  
  } 
  
  
  
  
  

  Change of line 25 to:

   var docName = docRef.name.split('.')[0];
   NamesaveRef = new File( outputFolder + "/"+docName +".jpg");
  

• Where Cookies-Exceptions are stored so that I can save the file?

  I have access to my computer using 'Accept cookies from sites' - 'Exceptions'.

  Whenever I have reinstall FireFox, I have to manually add the sites one by one to this list of exceptions.

  If I knew what file these exceptions were stored in, I could save the file and do not have to recreate them each time.

  Thank you.

  All permissions except password exceptions are stored in permissions.sqlite in the Firefox profile folder

  The permissions.sqlite file stores exceptions allow and block for cookies, images, pop - up windows and installation of the extensions (software).

  • http://KB.mozillazine.org/Profile_backup and back up and restore the information contained in the profiles of Firefox
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Close programs to prevent the loss of information. Your computer is low on memory. You save files and close programs. Java (TM) Platform SE binary Windows Media Player

  Hello

  I keep getting the following error message, and leterally having my computer off over and over again, even if I added 1 GB of RAM (now 3 total RAM) mor and also added a 8 GB SD card as more power:

  Close programs to prevent the loss of information.  Your computer is low on memory.  You save files and close programs.  Java (TM) Platform SE binary Windows Media Player

  I did research on the various search engines to know that many face the same problem, with a variety of possible solutions, but so far, none work.  We suggest that I go to Regedit and change the permissions of the user and then delete the old files, after I import them.

  Needless to say, I am just a user and have just a bit of technical knowledge.  The local PC repair shop in my town has no idea what to do.  For anyone who has a solution to this problem, help will be greatly appreciated!

  Randy Kline

  First of all, unless you know EXACTLY what you do and WHY you do it. I personally recommend never do anything in regedit. I consider myself a moderate to advanced computer user and a moderate user of windows. And I always stay away from regedit, if I can, because you can seriously screw things if you don't know what you're doing... Although, to be honest most of the settings will not have a devastating drama.

  It seems to me that this is a memory leak in the program, you will get this error message to make sure that your computer will just crash, because if she is running out of RAM... Well it will crash.

  If you have a 2 and a 1 GB for a total of 3 GB, I recommend the upgrade once more and just round up to a nice 4 (this is the most of memory a 32-bit system can handle in total)

  Works of memory in a way that you see really only a few performance jump with memory dual channel, the only way to have that is really striking the rods of same in each slot.

  There isn't really a reason that this happens every time, except that simply your computer is low on MEMORY, when your computer says this means RAM, not disk memory storage area.

  If you clean your computer of the programs you never use and stop using windows media player (itunes is better in my opinion, even if you don't have an ipod), you can see an improvement, but to really isolate the problem, I recommend simply opening your task manager as soon as you start your computer (ctrl + alt + delete usually gives you the option or it opens directly) otherwise you can do start-> RUN taskmgr.exe , OR type taskmgr.exe in the search box and press on enter.

  Then, look at the column of memory as I said it sounds like a program has a leak, and you will see that is because memory will begin at low/normal and then numbers just keep climbing...

  Also, make sure that your computer recognizes all 3 GB or RAM. in Task Manager if you have access to the performance tab, under physical memory must be a thing called Total, 3 GB = 3074. If this is not an option in your reason, you can go under Accessories/System Tools system information (on the start menu). (may take a while to load) but on the home page, you should see something that indicates the amount of TOTAL PHYSICAL MEMORY. You want to read this / 3GB or 3074 MB.

  Hope this helps some!

  I recommend to remove all programs, you are ready to, especially those that you never use. Do a complete uninstall. Then start installing windows clean (download google) just to make sure that the program has been removed. then go start--> run msconfig OR just type msconfig in the search and click on go (I don't know if you're running XP or Vista/7)

  In the msconfig dialog, you should see a section that says startup. Don't forget to remove programs that you do not first. Disable startup programs, you use every DAY. Don't go turn off all if windows needs some process to run, and some processes don't effect anything. But if you're curious, you should be able to google all of startup items and see what it's related to and why you do or that you don't need.

  Good luck! Sorry, I'm everywhere with this response.

• When you modify a form in the DC or Pro Player I can enter text etc., save, close, and return later to change it. However, once I use the function "Fill &amp; Sign" and save the document, it locks the file and all other fields are not editable. Is there a

  Hi guys,.

  When you type information in a form in the DC or Pro Player I can enter text with fields of text etc and then save, close and return later to change the form. However once I use the function "Fill & Sign" to sign the document, and then save, it locks the file and all other fields become editable. Is there a way around this to remove this feature where it becomes locked and instead allows me to change the form after a signature is applied and saved. All the security properties of the form are on 'admitted', there is no restriction. Even though the document is locked all the properties remain still as 'authorized '.

  The signing is FINAL.  You cannot sign a PDF paper advance. Complete and save, do not sign.

• Save the file without the application of effects?

  Forgive me if it's dense - my first experience with audio with soundbooth CS5 was so am new and now relearning with hearing.

  If I have audio charge up and I handle the effects to try to get perfect results, it seems that I can't save what I'm doing and come back later? If I close or save the file without applying the effects on the grid, they all disappear.

  It's just mind-boggling because all other programs Adobe Photoshop, After Effects, first, etc allow you to configure effects, save, open, and reconfigure.

  Knowing that I can assume I am doing something wrong because this simply makes the hearing as a musket - do or die right now, otherwise start again - and I know what that is impossible.

  What am I missing?

  TIA

  Paul

  Well Yes, that's all.

  Change display is for destructive processes that modify the file for good, whether they are physically cut the file or the application of permanent changes.

  View Multtrack's mixes real-time and process that can be used to do what you have the final product without changing the file.  As long as you save the Session that you use, all your changes are retained for the next time that you open it, but the track itself is unchanged... and when you're done, you mix your session (even if only a trace) to a new file that contains all of your effects.

  In defence of Adobe, this way of working is logically to anyone who comes to the hearing of the sound aspect.  Change the workflow to match Photoshop or whatever it would probably result in loud home audio guys (who, until this version, were 99.9% of the user base).  Even when I was doing audio post production for television (a Soundstation DAR and then with the formidable Protools) it was the kind of workflow I was used.

  I hope this helps.

• Saving PDFs: I would like to be able to change the name of the file and the destination of the downloads without jumping through hoops.

  I download a lot of PDF files and I organize their file name. I want to record on my computer to read later. When I have a PDF document is opened in the browser, it's particularly embarrassing. As it is, I have two options:

  Save the file:
  This automatically sends the file to a temporary folder to download, which Windows will not let me access without memorizing the exact location. It also saves automatically under the default file name, I never keep. If I use this option, I have to go back and manually move the file in my documents and rename it.

  Open the file:
  This opens the file in a new window from Adobe (while simultaneously recording to the same temporary folder). I have to open the file in the browser, and then open it in a new window, then hit save slot, then PDF, then change the destination folder (because the default value is the temp folder) and name of the file.

  Please, give me manual control of downloads! I want just a save as option.

  Is it possible to right click on the download link and use Save Link as...?
  Who will have the choice of "off-site" hands of Adobe.