When I disconnect the monitor Samsung, laptop monitor loses the office.

Similar Questions

• Jack was very warm when you disconnect the plug iPhone

  When my iPhone 6 supported this morning, I noticed the plug that goes into the wall was pretty hot when I disconnected the unit from the wall.  I never noticed this before.  Is it a bad sign and is it safe to use?

  On the phone under 80% charge when you unplugged? If Yes, the cube would be hot, because the phone draws more power for the first 80% of the load, it then tapers. If you have any doubts bring it to an Apple store for the assessment.

• Tecra 9100 blue screen when you disconnect the power supply

  Hi people,

  Im having a major problem, Ive had a major problem with my tecra 9100, when I unplug the power cable and try to use the laptop on battery, the blue screen comes up saying NMI: channel check / IOCHK

  then the computer shuts down, it restarts only properley if I plugged power of ext,
  also something to note, when I unplug everything first, he's not str8, its only when I try to use the laptop, which is pressing a key

  If someone knows something about this could you please let me know

  Thanks carl

  Hello

  This has been already discussed here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13784

  Check the sanremo poster, which refers to the knowledge base article Microsoft!

• No alarm beep when you disconnect the power supply a L530 cable?

  With my new ThinkPad L530, I get bored of the beep when the power cable is disconnected. So far, I found no option to turn on the alarm. This feature has been removed completely?

  
  

• Runtime for atibtmon.exe error when you disconnect the power cord

  Whenever I disconnect my power cord Windows 8 displays an error dialog box:

  Runtime error!
  Program: C:\WINDOWS\system32\atibtmon.exe
  This application has requested the execution to terminate in an unusual way.
  For more information, contact the application support team.
  Anyone with the same problem?
  Any fix for this?
  Computer: DELL Studio XPS 16

  I encountered this problem with my Pavilion DV6 after upgrade to W8 64 bit as well and is more annoying than it should be.  For what it's worth, I opened the AMD Vision Engine Control Center and disabled the "Vari-Bright" option on the power tab and which seemed difficult to get the error message every time my laptop is unplugged.  Does not solve the underlying problem and will decrease my time unplugged a bit, but I can live with that.

  Thanks for the steps, Amiarage.  Looks like we will have to just wait for ATI to fix.

• Satellite M55 goes out when you disconnect the power cable

  Hello

  to unplug my laptop the plug rather than switch to the battery, my laptop turns off often simply even if the battery is fully charged. Other time things work as it should.

  I did some research and my problem seems similar to that detailed here in this post.
  Maybe someone knows the solution for this problem?

  Thank you.

  Hello Luke

  As in the other topic described, you must communicate with the service and explain exactly what is happening. I fear that there may be something wrong with electronic power supply. We can just speculate on this.

  I fear unfortunately there is nothing you can do alone.

• How can you get rid of the media library of Pop - Up connection when you reach the office after turning on the PC?

  I don't really know what I did but now I have a pop-up Windows Media Center appears asking to connect when I turn on my computer before it leaves me to the real office and I was wondering how to get rid of it, I can without quite easily but still, there is no need to when I just would rather it just do not attend all.

  Open Media Center, go to: settings, general, startup and Windows behavior, uncheck, start Media Center when Windows starts.

• Computer hangs at startup, when you enter the Office

  I have a laptop Compaq CQ61. Whenever I connect to a profile, the computer crashes. I can't go on safe mode with network, no problem; but once I go on 'normal' start, it freezes almost instantly after logging into my account (there is no other account on the system). I tried updated/re-installing the drivers, but to no avail. I did an anti-virus (Avast) scan and nothing showed up. I run DirectX Diagnostic report, and he showed up nothing. Device Manager appears nothing unusual. However, Event Viewer gives me many mistakes in the critical, error, warning, Information, Audit success, Audit failure; However, none of them seem to directly affect the question of commissioning their playback (even briefly). Events that coincides with the start 'normally', according to the Manager of the events are wind ID 10-7000.

  Hello

  There might be a possibility of a conflict of software of third party causing the problem to occur. I would like you to put your computer in a clean boot state and check if the problem persists.

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to your computer as usual.

• Barrage v860 cell vedio has no sound when played on the office window 7

  No sound during video playback on computer, mobile phone Windows media player

  Hello

  1. What is the format of the video file you are trying to play?
  2. are you able to hear the sound when you play other videos in Windows Media Player?

  It can happen when the mute is enabled in Windows Media Player or the required codecs to read
  the sound is missing.

  I suggest to follow the steps below and we update on the State of the question.

  Method 1: Control the volume slider in Windows Media Player and if it is set to low, increase it and check. Make sure that the sound icon is not depressed. This button is the button mute and will cut the sound.

  
  

  Method 2: Check if you try to read the file format is supported by Windows Media Player or not.

  http://support.Microsoft.com/kb/316992

  
  

  If the file format is not supported, install check of the last codec.
  

  http://Windows.Microsoft.com/en-in/Windows/Windows-Media-Player-plug-ins

  For more information about Codecs, see the following link.

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Disclaimer of third party application:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Use of third party software is at your own risk.

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• My laptop screen becomes empty whenever I disconnect the plasma

  Recently, I connected my computer laptop to LG plasma to see a movie (using RGB output) and changed the accodringly to display definitions. However, when I disconnected the cable from the laptop, the laptop screen became blank. When I reconnect the cable - I see the laptop screen (even if the plasma is off). Now I'm stuck to work with a cable connected to nothing...

  When you restart the computer, I see the screen, it disappears when windows comes on.

  I've redefined (by using windows + P) the computer screen only - did not help. I've updated the display adapter and monitor in Device Manager - did not help. No virus detected; Nothing to do with the BIOS...

  Ideas please?...

  Hello

  I suggest you to uninstall and reinstall the drivers to display the computer manufacturer's website and check that I get no help.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• T460s refreshing when you connect the AC adapter / CC

  Lenovo's expensive

  My T460s Thinkpad refreshes when I plug in or unplug the laptop charger.

  All the drivers are up to date.

  IM using windows 10.

  By default, the refresh rate of the screen is reduced automatically when you disconnect the adapter to save power. Right-click on the "desktop", select "Graphics properties", click on 'Power', select 'on battery' and disable the change rate of auto update so this behavior is unintentional.

• Satellite A500 - battery light flashes when connected to the power supply

  Win 7 Satellite A500 PSAM3A-03P00E.

  Battery light flashes when connected to the power supply (intermittent fault), when I disconnect the sector and reconnect the flashing stops and battery (high capacity) continues to receive.

  Also, when battery light blinks the keyboard backlight stays on when it should white and if the backlight is turned off and the battery light starts to blink the keyboard backlight turns on, all other functions seem to work well.

  Charges of battery and the wedges load properly (when the battery flashes).

  Hello

  Have you noticed this problem since the first day of purchase?
  Theoretically, it could be possible that your battery begins to malfunction
  On the other hand, an electrical problem could also be possible

  However, try this:
  Remove the battery and the AC adapter. Then press and hold button power 30 sec long.
  Then insert the battery and plug AC adapter still does that help?

  By the way: this is the BIOS updated? If this isn't the case, perform an update.

• How to disconnect the CD drive on your computer

  I almost do not use the CD player so I unplugged.
  I have to do something on your desktop before you disconnect the CD player?

  Another quick question or computer performance improves when you disconnect the CD player?

  Turn off the computer and disconnect the CD player. Performance of a computer is not in CD players. The only question that will arise after having disconnected the CD player, it's that you can't use the CD in the PC more.

• How can I keep the laptop and find only the external monitor when I close the lid?

  Original title: external monitor

  I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

  I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

  Hello

  Perform the following steps.

  1. press the Windows key + X to display the System menu.

  2. Select Control Panel.

  3. Select the Power Options.

  4. in the left menu, select Choose closing the cover .

  5. look in the section of power and sleep buttons and lid settings .

  6. use the drop-down menus of the section when I close the lid , and then select do nothing for both options.

  I hope this helps.

  Concerning

• Half the Office disappears when you unplug the external monitor

  I have a MacBook (early 2011) with a single office shared between two monitors - with one hand on the internal screen and the other half on a Dell 23 inch. The Dell is my first when I use both at the same time. Until a few months ago, when I unplugged the external monitor, all windows automatically appears in the monitor to the laptop, including the menu bar and dock.

  After an operating system upgraded a few dos systems (I'm on version of El Capitan.6), when I unplug the screen seems not to register - in other words, the left side of my office, including the menu bar and the dock, and all the apps that were there just to disappear. So my laptop seems to think that the other view is always connected and direct, unless I restart with the detached monitor. (I unchecked 'Displays have separated spaces') in Mission Control.

  Is that what I can do to force the Office to redesign the internal screen? (Note that the display is a Dell S2330MX, which seem not to support any Mac OS - so who could answer the question here.) Thank you

  I've known who issues from time to time, try to close and reopen the lid, which needs to redraw your office.