Scripts using layers.

Similar Questions

• Cannot use the Val function in a script use

  I'm trying to convert a text string (binary number) in a number by using the Val function in a script of use but the colors of tiara the term Val in red and the script produces an error indicating "Variable is undefined:"Val"

  Why is that happen? Some functions are not allowed in use scripts?

  In addition, it seems impossible to use debugging in my use - if I try to add a variable to the Watch window, there never have any value even if I put a breakpoint on this line of code. Would it not possible to debug scripts use?

  David,

  regarding your question on "Val" I would like to direct you to the "File.Formatter.ParseString" function which is part of the API available at DataPlugins.

  CDbl and CLng do a good job in general, but they are dependent on the local configuration of the PC. 'ParseString' is so much more reliable.

  Andreas

• Run Calc Script using MaxL server location

  Hello!!

  I wonder if anyone has tried running Calc script stored on the server (not in the app folder) using MaxL?

  My research on run calculation led to run scripts associated to a particular application, but not on executing a script from a common repository such as the location of the server between multiple applications.

  Any help is greatly appreciated.

  It is sometimes useful, in my case, I had a unique scenario where I had 10 cubes

  Cube 1 essbase process information and then send to the DATA STORE, which then runs a set of calc (some detailed data movement)

  Cube 2 then consumes these data and processes to Cube 10.

  All scripts used in Essbase is the same. However, we had to keep all applications and maintenance was a nightmare. This RUNCALC scenario helps a lot.

  I had to create a dummy app/db to store all Calc and maintenance will be done on this one and a bat script will move those to the respective cubes. I can identify at the request

  Concerning

  Celvin Kattookaran

• Run the Ant script using Java in webcenter Portal

  Hi all

  I have requirement where I have to run an ant script using java or by any means to the webcenter portal.

  Ant script must be run on a triggering action.

  Please help me in this direction.

  Thank you and best regards,

  Shakir

  Hey all,.

  Here is the solution, I had finally

  BuildFile file = new File ("myBuild.xml");

  Project p = new Project();

  p.setUserProperty ("ant.file", buildFile.getAbsolutePath ());

  ConsoleLogger DefaultLogger = new DefaultLogger();

  consoleLogger.setErrorPrintStream (System.err);

  consoleLogger.setOutputPrintStream (System.out);

  consoleLogger.setMessageOutputLevel (Project.MSG_INFO);

  p.addBuildListener (consoleLogger);

  p.init ();

  ProjectHelper helper = ProjectHelper.getProjectHelper ();

  p.addReference ("ant.projectHelper", assistance);

  Helper.Parse (p, buildFile);

  p.executeTarget (p.getDefaultTarget ());

  Kind regards

  Shakir

• What is the Action Script (using AS2) code when you loop once a scene and then re-read and intervention

  What is the Action Script (using AS2) code when you loop once a scene and then re-read and slaughter on a certain slice?

  Basically, you need keep a count and use it as your stop control.  In the first image, it takes something to assign the value, but you do not want to assign an initial value, so you could use...

  var County;

  if(Count == undefined) {}
  Count = 0;
  } else {}
  Count ++;
  }

  Then in the frame where you want to stop after that a loop is completed you can have...

  if(Count == 1) {}

  Stop();

  }

• Create the script from another script using GUEST

  Oracle 11
  
  Instead of having to make a link to a different database, I want to create 2 scripts that are run from a shell script and run separately. Run Script1 in Database1 would create 2 Script using PROMPT to create the second script while entering a date of base1 to base2. I've almost got it but the problem is... Script2 using COPY FROM and I need to put a "-" at the end of each line that the GUEST takes as a literal instead of as part of the output.
  
  SCRIPT1:

  set pagesize 0
  set trimspool on
  set linesize 2000
  set echo off
  set verify off
  set feedback off
  set sqlblanklines on
  
  spool /home/michelle/sql_scripts/sl_dtc_copy2.sql
  
  PROMPT whenever sqlerror exit sql.sqlcode rollback
  PROMPT SET ARRAYSIZE 5000
  PROMPT SET COPYCOMMIT 20
  PROMPT set linesize 4000
  PROMPT 
  PROMPT COPY FROM {username}/{pswd}@{DB2}  TO {username}/{pswd}@{DB2}
  PROMPT CREATE SL_DTC_TMP USING SELECT DISTINCT 
  PROMPT col1, col2, col3
  PROMPT FROM dual
  PROMPT WHERE veh_data_elements_cd = 'ODO_READ'
  PROMPT and       dh.data_collected_timstm >=  
  select trunc(sysdate)-7 from dual; 
  PROMPT and       substr(vdh.vin,10,1) in ('A','B','C','D') 
  PROMPT /
  
  PROMPT spool off
  PROMPT exit
  
  spool off
  exit

  SCRIPT2 NOW:

  whenever sqlerror exit sql.sqlcode rollback
  SET ARRAYSIZE 5000
  SET COPYCOMMIT 20
  set linesize 4000
  
  COPY FROM {username}/{pswd}@{DB2}  TO {username}/{pswd}@{DB2}
  CREATE SL_DTC_TMP USING SELECT DISTINCT
  col1, col2, col3
  FROM dual
  WHERE veh_data_elements_cd = 'ODO_READ'
  and       dh.data_collected_timstm >=
  12-AUG-11
  and       substr(vdh.vin,10,1) in ('A','B','C','D')
  /
  spool off
  exit

  SCRIPT2 HOW IT SHOULD BE:
  -A [SPACE] AND a [-] at the end of each line
  -THE DATE MUST HAVE THE APOSTROPHES AND PREFERABLY AT THE END OF THE PREVIOUS LINE
  

  whenever sqlerror exit sql.sqlcode rollback
  SET ARRAYSIZE 5000
  SET COPYCOMMIT 20
  set linesize 4000
  
  COPY FROM {username}/{pswd}@{DB2}  TO {username}/{pswd}@{DB2} -
  CREATE SL_DTC_TMP USING SELECT DISTINCT -
  col1, col2, col3 -
  FROM dual -
  WHERE veh_data_elements_cd = 'ODO_READ' -
  and       dh.data_collected_timstm >= '12-AUG-11' -
  and       substr(vdh.vin,10,1) in ('A','B','C','D')
  /
  spool off
  exit

  Thank you

  Oops, sorry, I forgot to change the line.
  Must be double quotes to delimit the orignial:

  SELECT 'WHERE veh_data_elements_cd = ''ODO_READ'' -' from dual
  

  Kind regards
  Sylvie

• How to operate only a calc script using ODI

  Hi John,.
  
  I would like to run only a calc script using ODi. Could if it you please let me know the process. Is it mentioned in your blog anywhere?
  
  Awaiting your response
  
  Thanks in advance
  Sravan

  The km - 'IKM SQL for Hyperion Essbase (DATA)' there is an option 'RUN_CALC_SCRIPT_ONLY', set to Yes and then enter the name of the calc script in "CALCULATION SCRIPT".
  It will take still a source and a target in the interface for it to run, but it will ignore the source and the target and just run the calc script, it is possible to customize the KM so it didn't need a source/target, but you should be fine with the method I proposed.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to run a script using the OMB tcl

  I'm trying to run a tcl script using the following syntax in cmd
  
  D:\app\Username\product\11.1.0\db_2\owb\bin\win32 > ombplus.bat c:\t.tcl
  
  and I get the error
  
  OMB01001: Not connected to the repository.
  
  The tcl script was basically accompanied by a tutorial and I can't continue the OWB tutorial, unless I run it first

  Departure ombplus.bat

  You can then start the script with the source command such as

  source C:/t.tcl
  

  Be careful with the backslash (he is not C:\t.tcl)

  You must also add a connection before your script to OWB with the OMBCONNECT

  OMBCONNECT $UserLogin/$UserPassword@$DBHostName:$DBHostPort:$ServiceName USE REPOSITORY '$RepositoryUser' USE MULTIPLE_USER_MODE
  

  Replace the parameters $ with your own value.

  And then your script, you can disconnect:

  OMBDISCONNECT
  

  Success
  Nico

  Documentation is here for the 11g OMBCOMMAND
  http://download.Oracle.com/docs/CD/B28359_01/OWB.111/b31279/TOC.htm

• Call a shell script using the OA framework page.

  Hi all
  I'm new to Framework.There OA is a condition in which I have to call a shell script using a Web page using OA framework. Can someone shed some light on how can we do this?
  
  Concerning

  Hello

  You can save the script shell as simultaneous program and submit this OAF page request.

  Sambi

• parallelized script using beaches error?

  Hi all
  
  I have a script that runs that I parallelized who accepts the beaches of another table [PROCESS_CONTROL]. I get the message in my logs below and I'm not sure exaclty what he tells me. Any ideas?
  
  superkav.
  
  Elapsed time: 00:00:00.18
  5 old: C_OCTASK_TRANSFERHISTO, I_OCTASK_TRANSFERHISTO from TOCTASKTRANSFERHISTORY WHERE I BETWEEN (SELECT RANGE_LO FROM PROCESS_CONTROL WHERE ID_processus = "1" and THREAD_NBR = & 2 ") and (SELECT RANGE_HI FROM PROCESS_CONTROL WHERE ID_processus ="1 "and THREAD_NBR = & 2);
  5 new: C_OCTASK_TRANSFERHISTO, I_OCTASK_TRANSFERHISTO from TOCTASKTRANSFERHISTORY WHERE I BETWEEN (SELECT RANGE_LO FROM PROCESS_CONTROL WHERE ID_processus = 'toctasktransferhistory' and THREAD_NBR = 2), and (SELECT RANGE_HI FROM PROCESS_CONTROL WHERE ID_processus = 'toctasktransferhistory' and THREAD_NBR = 2);
  
  PL/SQL procedure successfully completed.

  Your script uses The Variables of Substitution. 'old' and 'new' lines show text before and after substitution.
  See the example:

  SQL> define tab=dual
  SQL> select * from &tab;
  old   1: select * from &tab
  new   1: select * from dual
  
  D
  -
  X
  

  The only difference is that params & 1, & 2 are not defined explicitly, but passed to the script in the command line. The script works fine, there is no error during execution (at least in the fragment of the newspaper you provided).
  Kind regards
  Dima

  Published by: DimaCit on September 5, 2008 13:44

• Adapt the JSFL Scripts useful for animating/canvas

  As a programmer who likes to automate many I have used/made a lot for Flash jsfl scripts in the past.

  Some new users do not know that these scripts can be easily adapted for Javascript/canvas.

  For example:

  With a selected calendar, try this:

  /*

  * [KC] Add stop frames

  * By Kevin Cao (http://kevincao.com)

  * 2005.6.19

  */

  Insert keyframes with a shutdown command in each image selection

  var dom = fl.getDocumentDOM)

  var timeline = dom.getTimeline)

  var selection = timeline.getSelectedFrames)

  var numSelections = selections.length

  for (s = 0; s < numSelections; s += 3)

  {

  cLayer = selections [s]

  startFrame = selections [s + 1]

  endFrame = selections [s + 2]

  timeline.setSelectedFrames([cLayer,startFrame,endFrame],true);

  timeline.convertToKeyframes ();

  for (f = startFrame; f < endFrame; ++ f)

  {

  Timeline.Layers [cLayer] .frames [f]. ActionScript = "this.stop ();";

  }

  }

  JSFL doesn't care if you use actionScript 'real '.

  Thought that may be useful.

  Hi moccamaximum ,

  Thank you for taking the time to share this information with the community. Very much appreciated.

  Remember that even if no one answers, there are a lot of people who visit this forum just to get information without ever answering.

  Thank you

  Preran

• Script text layers

  Hey ho,

  Basically what I'm hoping to do is proof a document of the fool.

  I have a template saved, which opens, as published in the need - it's text layers, I'm more concerned about here.

  The other guys in the laboratory of evil to use windows so much Photoshop, so I'm hoping to write a script that can change the text inside of a several layers of existing text, then save an action to open a script and put actions button mode - do not confuse the cavemen.

  I hope to have a pop up entry field, and entries must change the text within the specified layers. Nothing in the text should change (font, Style, color etc...). I think that altogether there are 8 layers, in which the text should be changed from the opening.

  any input would be much appreciated guys,

  see you soon

  In this example, text layers are identified by a name ad must be at the top level.

  // 2014, use it at your own risk;
  #target photoshop
  ////////////////////////////////////
  if (app.documents.length > 0) {
  var myDocument = app.activeDocument;
  //////////////////////////////////////////
  ////// create dialog for customer-entry //////
  var dlg = new Window('dialog', "Enter the texts", [500,300,820,850]);
  dlg.textA = dlg.add('edittext', [12,15,308,35], "", {multiline:false});
  dlg.textA.active = true;
  dlg.textB = dlg.add('edittext', [12,45,308,65], "", {multiline:false});
  //////////////////////////////
  // build- and cancel-button;
  dlg.buildBtn = dlg.add('button', [168,470,307,500], 'OK', {name:'ok'});
  dlg.cancelBtn = dlg.add('button', [13,470,153,500], 'Cancel', {name:'cancel'});
  dlg.center();
  var myReturn = dlg.show ();
  // check fpr availability of the used fonts;
  if (myReturn == true) {
  replaceTheText (myDocument.layers.getByName("text1"), dlg.textA.text);
  replaceTheText (myDocument.layers.getByName("text2"), dlg.textB.text);
  };
  };
  //////////////////////////////
  function replaceTheText (theLayer, theString) {
  theLayer.textItem.contents = theString
  };
  

  Edit: And there are opportunities for something to go wrong there indeed.

  So we can hope for the best, wrap perhaps problematic things in try-clauses or include controls.

• Script using AppleScript GUI does not

  Before we go too complicated, I'm starting to get a basic copy/paste using keyboard shortcuts to work. In theory, if I can copy a value of cells in another cell using keyboard shortcuts, I can use keyboard shortcuts, I need more complex scripts.

  Can someone more well informed that I look over the below basic code and tell me what I'm doing wrong?

  (I added the script editor to the security settings for accessibility to allow him to control the computer.)

  My code for a simple copy/paste in figures (other programs also not to answer):

  on run

  say application "Numbers".

  activate

  if not (there are document 1) then error number 1000

  say document 1

  tell the worksheet active

  the value the selectedtable to (the first table whose class of selection range is range)

  the value myRows to count the lines in selectedtable

  say selectedtable

  the value the selection range of cell 2 of rank 3

  sendCopy

  the value the selection range of cell 4 of rank 3

  sendPaste

  end say

  end say

  end say

  end say

  end run

  
  

  on sendCopy()

  say application 'Numbers' to Activate

  say application "System events".

  say application process "Numbers".

  key sequence « C »

  end say

  e nd dire

  end sendCopy

  
  

  on sendPaste()

  say application 'Numbers' to Activate

  say application "System events".

  say application process "Numbers".

  key sequence « V »

  end say

  end say

  end sendPaste

  Thank you

  Jason

  You favorite the AppleScript Language Guideand then use the appropriate syntax:

  key sequence Using 'C' command down

  
  

  key sequence 'V' with the command down

  
  

  It may or may not be other contributory factors in your script as to why it does not work.
  

• load via the script use

  Hello

  How can I charge a use (*.uri) via the script? Check the plug current if the plug-in is already loaded?

  Greetings,

  Martin

  Hi Martin

  The following will let you know what is the revision of a pluggin of data.

  The second function updates the plugin data upon request.

  Enjoy!

  Paul

  ' Gets the version of a use

  function GetDatapluginVersion (strDatapluginName)

  Dim oMyDataPlugin

  Set oMyDataPlugin = Navigator.Settings.RegisteredDataPlugins (strDatapluginName)

  GetDatapluginVersion = oMyDataPlugin.Version

  "Call the MsgBoxDisp (oMyDataPlugin.Version)."

  EndFunction

  Sub CheckUpdateAOP5

  Dim strAOP5CurrentVersion, strAOP5LatestVersion

  Dim MyVar

  protected path2AOP5: Path2AOP5 = 'Yours to fill. "

  strAOP5CurrentVersion = GetDatapluginVersion ("AOP5")

  strAOP5LatestVersion = "11.0.1f5081".

  If strAOP5CurrentVersion = strAOP5LatestVersion then

  ' msgbox ("AOP5 latest version:" & strAOP5LatestVersion & "is equivalent to" & strAOP5CurrentVersion)

  on the other

  MyVar = MsgBox ("AOP5 use requires an update now?", vbYesNo + vbQuestion, "DIAdem")

  Select if MyVar

  Case VbYes

  Call ExtProgram (Path2AOP5)

  Select end

  end if

  EndSub

• Run a python script using Task Scheduler

  I searched on google for an answer to how to proceed, and none of the solutions have worked. I use windows 7 and python 3.7. I would like a simple explanation of what to type in the 3 spaces in the action of the task properties tab. Other solutions usually take forever to run, throwing up an error message and tell me that the task was successful, but I can say that the script never started.

  You now know how to use the program to invoke a script. Maybe as follows:

  1. Open a Console with cmd.exe.
  2. Type these commands:
     python34.exe /?
     (to get help on the syntax of the command)
     python34.exe NameOfYourScript.pt