ScriptUI: get the dimensions of the container using the automatic formatting?

Similar Questions

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Unable to get the automatic updates of Windows.

  Suddenly I'm unable to get the automatic updates of Windows.  When I use Windows fix - it, it is unable to do so, stating that automatic update components need repair.  Is there a way to repair the components?

  Hi Robert,.

  Reset windows update components.

  http://support.Microsoft.com/kb/971058

  Use the automated fix solution, then check windows update to see if it works.

  Additional information: If you are not fully patched for Windows XP SP3, download and install Windows XP SP3 from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the warning text on the professionals and the network installation.

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• How to get the hour format system?

  Hi all

  How to get the hour format system, I mean what format 24 / 12 system uses?

  Looks like the CalendarSettings class is perhaps the official way: https://developer.blackberry.com/native/reference/cascades/bb__pim__calendar__calendarsettings.html#...

• Get the Date format that the user sets in "Preferences".

  Hello
  Is it possible that I can get the date format (for example: "DD-MMM-YYYY', 'DD-MM-YYYY' etc.) where the user desires under 'Préférences' in a page of the OPS?
  
  Concerning
  Hawker
  
  Published by: HawkerHunter on Aug 6, 2011 11:02

  ICX_DATE_FORMAT_MASK - is the value of profile that contains the value that is selected in the preferences page.
  You can try pageContext.getProfile ("ICX_DATE_FORMAT_MASK");
  in your code.

  Kind regards
  Krishnan guru.

• I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  Try this below and see if it help you.

  http://support.Microsoft.com/kb/871122

• I can't get the automatic updates to enable secutiy tab in the control panel.

  I can't get the automatic updates to enable secutiy tab in the control panel. There are propmts me to light them mannualy in systems that they tab already, but they do not always allow me to turn on the automatic updates on the Security tab. I don't see the yellow shield appearing at the bottom RHS of the screen more updated?  someone know why?

  YAY. I got it fixed. I had to reinstall the automatic updates service and everything works. All updates now came through windows and the Security Center has all the lights GREEN.

• How can I install to get the automatic updates for my drivers on a system Windows 8?

  Original title: hardware device

  How can I install to get the automatic updates for my drivers on a system Windows 8?

  Hello
  Go through the links below, it offers you a complete description of the automatic updates.
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-Update 
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-Update-FAQ 

• ScriptUI get the path to the indesign installation directory

  Does anyone know if there is a way to get a path of the users to their installation directory?

  I have the script, which creates a new menu in Indesign startup item.  the menu item is clicked, it opens another script.

  Right now, I have the path to the second script hardcoded, which works very well:

  C:\Program Files (x 86) \Adobe\Adobe InDesign CS5.5\Scripts\Scripts Panel\DM_Core\DM_RemoveMenu.vbs

  but now I have to give it to other users, and I need to know if there is a way to get the installation path they have to their indesign.

  In the end, what I get is:

  C:\Program Files (x 86) \Adobe\Adobe InDesign CS5.5\Scripts

  I tried scriptsFolder but that takes me to the right place.

  Anyone has any ideas.

  Thank you

  This should help you to what you want:

  function GetScriptsFolder (){
            var scriptsFolder = null;
            do{
            // On Mac this is a folder inside the app package
                      var appFolder = Folder.startup;
                      if (! appFolder.exists){break;}
                      scriptsFolder = Folder(appFolder + "/Scripts");
                      while (appFolder.exists && ! scriptsFolder.exists){
                                appFolder = appFolder.parent;
                                scriptsFolder = Folder(appFolder + "/Scripts");
                      }
                      if (! scriptsFolder.exists){
                                scriptsFolder = null;
                                break;
                      }
            }
            while (false);
            return scriptsFolder;
  }
  

  Substances

• Could not get the image format to fill screen TV is set to 16: 9 all other devices to fill the screen

  I can't get the picture size to fill the screen. The TV is set to 16: 9 and all other devices to fill the screen.

  Thanks for any suggestions that might help solve this frustrating problem.

  Welcome to the Apple community.

  The devices on which you are talking about, are you using AirPlay.

• How to get the text formatting in the tables

  Dear experts and aid

  For my project, I import an RTF file and then read the data into 3 tables. It works fine when just using the contents of the string of paragraphs. However, the final script should be able to read and to replace the text formatted...
  Why use intermediate tables? Because otherwise I need to swap between two fm-documents (and you can be a part of the book).

  The imported file starts with a certain number of lines separated into two parts by a TAB ("designates a TAB in \x08 FM)
  [[Garneau, 1990 #12]]    »   [9]
  The good article can also be locally as text, e.g. [9]
  Then follow the same (or smaller) number of paragraphs with text formatted like this:
  [9]"D. Garneau, ed., National Language Support Reference Manual (national language Information Design Guide. Toronto, CDN: IBM National Language technical Centre, 1990.

  Is it possible to replace in the body of the function below the next song

    while(pgf.ObjectValid()) {
      pgfText = GetText (pgf, newDoc);
      gaBibliography.push(pgfText);
      pgf = pgf.NextPgfInFlow;
    }
  

  with this

    while(pgf.ObjectValid()) { 
      gaBibliography.push(pgf);
      pgf = pgf.NextPgfInFlow;
    }
  

  Do I need a special statement of the gaBibliography range?
  And how to get the right part of the lines as formatted intro thingy in table gaFmtCitsFmt ?

  Currently, I read in the tables as "strings" (function GetText not shown):

  var gaFmtCitsRaw  = [];                           // left column in processed RTF
  var gaFmtCitsFmt  = [];                           // right column in processed RTF
  var gaBibliography= [];                           // bibliography lines from processed RTF
  // filename is something like E:\_DDDprojects\FM+EN-escript\FM-testfiles\BibFM-collected-IEEE.rtf 
  
  function ReadFileRTF (fileName) {
    var nCits=0, nBib = 0, openParams, openReturnParams, newDoc, pgf, pgfText ;
    var TAB = String.fromCharCode(8);               // FM has wrong ASCI for TAB
    var parts = [];
    
    openParams = GetOpenDefaultParams();
    openReturnParams =  new PropVals();  
    newDoc = Open (fileName, openParams, openReturnParams);  
    pgf = newDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;  // get first pgf in flow
  
  // --- read the temp/formatted citations  
    while(pgf.ObjectValid()) {
      pgfText = GetText (pgf, newDoc);
      if (pgfText.substring (0,2) == "[[") {        // citation lines start with [[
        parts = pgfText.split(TAB);                 // get the two parts of the line
        gaFmtCitsRaw.push (parts[0]);               // Push the result onto the global array
        gaFmtCitsFmt.push (parts[1]);
        pgf = pgf.NextPgfInFlow;
      } else { break }
    }
  
  // --- read the bibliography
    while(pgf.ObjectValid()) {                      // until end of doc
      pgfText = GetText (pgf, newDoc);
      gaBibliography.push(pgfText);
      pgf = pgf.NextPgfInFlow;
    }
    newDoc.Close (Constants.FF_CLOSE_MODIFIED);
  } // --- end ReadFileRTF
  

  The following questions will then be how to change the script of FindAndReplace of Ian Proudfoot for managing text formatted as replacement. I will need to use the copy and paste IMHO...

  Klaus, okay, before pasting, you must assign the TextSelection object at your insertion point.

  // Add a new paragraph after the current paragraph.
  var newPgf = oDoc.NewSeriesPgf (lastPgf);
  var textRange = new TextRange (new TextLoc (newPgf, 0), new TextLoc (newPgf, 0));
  
  oDoc.TextSelection = textRange;
  oDoc.Paste ();
  

  -Rick

• How to get the Date format for a specific date?

  May be it is inept to ask, but I'm aware of the Date.
  which appear on client - it's just that the average customer treats the date.
  Right?
  So what happens if a need to check the format to set the server to date.
  Or need to write common code indicating the date format
  on the server, it is running.
  
  This requirement came into my mind while using the extract method.
  Actually, I wanted to date of manipulation of the side back end.
  Let's say the time is 04:12:2012 03:05:16.
  Now, if I add 100 minutes, the result will be.
  04:12:2012 04:45:16.
  
  It's the requirement. Maybe there may be best way to do
  but it's the way I think now.
  
  Thank you.

  It's something that you don't need to know:
  you have a string containing a date or timestamp, and then he must know the format of this string and not the fornat date used by the server.
  or you have a date or timestamp, and then you can add minutes to it without knowing the format as described before.

• He cannot get the automatic updates to work. Windows XP Edition Home Premium!

  I had a crash and had to reinstall.

  I had a crash and had to reinstall.

  You must get this patched SP3 first machine.

  Uninstall Internet Explorer 8 and Internet Explorer 7--> you back all the way back to Internet Explorer 6 before continuing (if necessary).

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

• How the "automatic formatting" a very long word in InDesign?

  I try to insert/import/paste text in InDesign. The text contains a few - strings of text (or "words") with more than 3000 characters. This causes InDesign to have in excess of text and is not not be able automatic flow of the text.

  When I import (or paste) the text I am shift + click on (I have also tried option + shift + click) to of the auto-enchainement downwards along the pages, but the automatic flow stop on page 16 (where the 'words' long begin to occur), although my file contains more than 200 pages. I get the little red sign below in the last text box, which indicates that I have overset text.

  I tried then click the Red sign and continue the flow of the text on the following pages, but I find myself just with text boxes empty on the following pages, each time I try click on the Red sign.

  I removed along 'words' and tried again and now InDesign doesn't seem to have a problem with my text. If the problem is caused by the long "words."

  The text format is not important (I tried .rtf and .txt) and InDesign is able to recognize both.

  I can not however, insert spaces or end of line in these long 'words', since we "words". The number of characters in each 'word' is important, and if I start to add extra spaces or end-of-line charecters he would change the "words".

  I have a lot of places in the text where I have these long 'words', and I would avoid too much clicking and inserting to work around this problem.

  I am running InDesign CS3 on a Macintosh 10.5.8

  I would be grateful if someone has an idea how to work around these.

  Thanks in advance for your time and help

  My suspicion is that they are, in fact, nonbreaking hyphens, but I hope that the OP can enlighten us.

  I must say that some screenshots can be useful, too.