SDDM 4.10.866 - sequences and triggers

Similar Questions

• Sequences and triggers

  I feel terribly stupid, that I can't fight another beginner problem, I can't find anywhere with the right information.
  
  I want to create a sequence that is the primary key of a table, which starts at 1 and increments by 1. Whenever I insert a line in the table I want it to trigger this sequence in the primary key. IE, I want to insert the names of film, and I want the number of films for the PK. (I.e. count of 1 foot per film).
  
  I think you'd need a sequence and a trigger. The sequence defined as the primary key when you create the table.
  I did all that. Creates a Table with the primary key of the sequence I created before hand. Then, I tried to create a trigger to trigger before each insertion.
  
  Here's the SQL code of the sequence
  

   CREATE SEQUENCE   "MOVIE_NUMBER"  MINVALUE 1 MAXVALUE 200 INCREMENT BY 1 START WITH 9 NOCACHE  NOORDER  NOCYCLE

  And here is the SQL code for my trigger
  

  CREATE OR REPLACE TRIGGER  "BI_MOVIES" 
    before insert on "MOVIES"               
    for each row  
  begin   
      select "MOVIE_NUMBER".nextval into :NEW."MOVIE_NUMBER" from dual;  
  end; 

  Here is my SQL Table
  

  CREATE TABLE  "MOVIES" 
     (     "MOVIE_NUMBER" NUMBER(28,100) NOT NULL ENABLE, 
       "QUALITY" VARCHAR2(10), 
       "PRODUCER" VARCHAR2(80), 
       "YEAR_PRODUCED" NUMBER(1,5), 
       "DESCRIPTION" VARCHAR2(4000), 
        CONSTRAINT "MOVIES_PK" PRIMARY KEY ("MOVIE_NUMBER") ENABLE
     )
  /
  
  
  CREATE OR REPLACE TRIGGER  "BI_MOVIES" 
    before insert on "MOVIES"               
    for each row  
  begin   
      select "MOVIE_NUMBER".nextval into :NEW."MOVIE_NUMBER" from dual;  
  end; 

  If I enter a figure in the primary key 'MOVIE_NUMBER' (via the GUI APEX object browser), then it gives me

  error ORA-01438: value larger than specified precision allowed for this column

  If I enter any number in "MOVIE_NUMBER", then I get

  error ORA-06502: PL/SQL: numeric or value error: number precision too large ORA-06512: at "MOVIE_LIST.BI_MOVIES", line 2 ORA-04088: error during execution of trigger 'MOVIE_LIST.BI_MOVIES'

  MOVIE_NUMBER data type is NUMBER (28,100), so I have trouble that it is larger than the specified accuracy? I don't know what's happening or why it doesn't work.
  Any help would be greatly appreciated.
  
  Thank you
  Tom

  If it's just a primary key, make a number and do not give a clarification. A sequence is just a unique number and if its your PK you don't care really what number.

  If movie_number is a unique identifier, create a unique constraint on this column with any precision you need.

• Sequence of triggers

  UseCase:

  I have some different triggers working on the same status. And I need a specified sequence operation triggers.

  Is it possible to define the sequence?
  The "SeqNr' triggers to influence the sequence of triggers to work on the same status?

  We must differ between incoming and outgoing of triggers.

  On arrival:

  If a valid message is sent to ServiceGrid, and the message is well authenticated systems trying to find the trigger message corresponds to the message received.
  First of all the only way to identify the trigger is the sender. Thus, the system searches all shippers to find appropriate communication.
  If only one communication is the situation is easy and the affected trigger is processed.

  If more than one communication is that the system begins to process the communications models until a ticket can be found.
  If this is the case of stopping the treatment and mentioned relaxation is processed. So always only a single incoming trigger is activated when a message is received.
  The sequence of the treatment of the models is not predictable.
  So its always a good idea to have different valid senders for different purposes. This is why the sequence number is not editable for incoming triggers.

  Outbound:

  It is generally possible over a trigger out with a single event. Outgoing triggers are processed in the order of their sequence number.

  If a trigger has several communications, they are processed in the order of their ID beginning with the lowest.
  If you checked the box 'Manual Selection' the sequence number is used to display the triggers in the order of the Seq.No interface...
  If the checkbox "IsTopRule", it says outgoing trigger is activated first.
  If there is more than a trigger marked as 'IsTopRule', they are processed in the order of their identity.

• I'm trying to make a film of a short sequence and it fails

  I use the FCP 6.06 with Mac OS X5.8 for several years with no problems.

  Suddenly, I tried to make a short film in quick time and he made me a loop of the first seconds and has not reached the end of the sequence.

  What can be the problem?

  ELSA

  What is the source material?

  What are the parameters of the sequence?

  Click on an item in the source in the browser of the FCP, and once selected, press command + 9 to display the properties of the item for the clip.

  Declare these properties here, or take a screenshot of the properties of the element and after that the screen shot here.

  Then click anywhere in the chronology of the sequence and press command + 0 {zero} to display your sequence settings. Either declare these settings here or take a screenshot and post this screenshot of settings of the sequence here.

  MtD

• Problems during execution of a LabVIEW VI in a new thread under TestStand sequence and execution of the MainSequence in step by step mode

  Hello

  We want to run a VI in LabVIEW (LV2011) at the same time to the execution of a sequence of test of TestStand (TS2010). The VI should view the condition of the equipment, while the test sequence is written in TestStand. It would be a nice feature of debugging the TestStand sequence while watching the State of the material in the LabVIEW Panel, too.

  This is where it's our problem. Imagine that you have a MainSequence calling a subsequence in a new thread, which runs the LabVIEW VI. After the call, the MainSequence continues its progression, as it is configured to do this. But if we want to execute the MainSequence in step parallel execution of VI mode, we can do that. The controls for "Step Out" etc. are grey.

  I tried to build a very simple example to explain what I mean. It's just a sequence and a LabVIEW VI, no real functionality, just take as an example for our problem.

  Any tips? What we're doing wrong? Is there something that needs to be changed in the LabVIEW VI?

  Best regards

  Manual

  You should use the monitor of the termination and the ExternallySuspended APIs for the EIS to running asynchronously. There are screws of wrapper around these APIs in the LabVIEW TestStand palette.

  For more details see using the API for the following:

  Thread.ExternallySuspended

  Execution.InitTerminationMonitor

  Execution.GetTerminationMonitorStatus

  Unless I am struggling to understand what you're asking, if you are using these APIs, you should be able to make it work as you are eager to do things.

  -Doug

• Remove the automatic sequence and trigger the DDL for surrogate keys?

  Is there a way to remove the shutter and the sequence of creation for surrogate keys when export file DDL?

  I know that most of the time the auto sequence and trigger creation is welcome and very convenient.

  However I'm migrating from an old model of Designer and here only the necessary sequences are created.

  They have a different name and logical trigger is personalized (and generated outside of the Designer).

  There is a lot of code package accordingly. So, I prefer to create and use different sequences.

  Is there a way to do this? Tips are welcome. Create

  Hello

  you change preferences - "Data Modeler > model > physics > Oracle"-set "Default auto-increment DDL" and "Identity default DDL" voices against ZERO and generate the DDL for Oracle12c

  
  

  Philippe

• If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  Better is to import the cs5 project in the new project of CC.

  And Yes this could have problems, he could not.

  I would have ended up in CS5. Export to the lossless format and encode with SOUL CC until the final destination.

• Is there a command that will take a nested sequence and break in it is separated from the pieces, as they were before, he become nested?

  Is there a command that will take a nested sequence and break in it is separated from the pieces, as they were before, he become nested? I think I've seen this once iin training but I don't remember and can't find it.

  I have roughly the same open close and music track for 4 shows and I hate having to create these same elements to see all four the separately.

  Thank you

  Steve

  You must click the icon before you glue the nest in a new sequence.

• How can I copy a sequence and all the duplicate items?

  I make a film of learning with key issues such as text captions.

  Legend sequences consist of:

  Text that are animated independently for two titles appear one after the other, then both remain on the screen.

  Matte colour background

  A logo

  There are therefore 4 clips in each caption.

  I created each one as a separate sequence using duplicate

  So far so good.

  When I then change the text to sequence 02 it changes in all other cases.

  What I want to do is to reproduce a sequence AND all the elements in it so that the new titles are created.

  This seems very basic - can it be done?

  Create a title based on the title currently titration and then replace the old with the new title:

  Create a title based on the current title

  • In the Titler, open or select the title that you want to base a new title.

  • In the title quick properties panel, click new title based on current title .

  • In the new dialog box title, enter a name for the new title, and click OK.

  • Change the title as you want.

  • Close the module titration or save project to save the title.

    from there:

    Create and edit titles in Premiere Pro

• What is the difference between the sequence #, # and # total in LR to images?

  Hello

  For custom to name what is the difference between the sequence #, # and # total in LR to images?

  Thank you

  Jason

  Read this article.

• How to find the sequence and its associated with a particular schema tables

  Hello

  How can I get a list of all sequences and its tables related to a particular schema.

  Kind regards...

  ASIT K. reducing

  AsitK.Mohanty wrote:

  Hello

  How can I get a list of all sequences and its tables related to a particular schema.

  Kind regards...

  ASIT K. reducing

  What is the solution when the code that specifies the SEQUENCE does not exist or is in the database; for example when the code runs in the external application server?

• Multichannel sequence and export Quicktime

  I need to create a multichannel 422HQ Quicktime file leave a sequence and I'm a bit confused.  I have 4 stereo tracks - a stereo mix, a stereo mix of Dialogue, a mixture of stereo effects and a mix of stereo music.  This file is intended to be used in a montage by another as part of a montage (probably with different music) - thus the splits.

  I created a multichannel sequence with a master multi-channel and 4 tracks 'standards '.  Here is where I get confused.  In the Audio Track Mixer assignment of output for all tracks is set to 'Master '.  There's no other choice.  Under the "direct output assignment" assign the first track on "1 + 2", the second to "3 + 4" and so on or something else?

  When I export, under "basic audio settings" under export settings, I need to make a selection of "channels".  I guess that "8"?  If I select '8', I then select a track "Audio".  I choose "Single track", "8 mono tracks" or "4 stereo pairs.  I chose "4 stereo pairs.

  However, the resulting file, when performed on a Quicktime Player, play clearly all 8 track at a time (I can tell because there is a slight flanging on dialogue).  Is this good?  Looks like I should only hear 2 channels.

  Just want to make sure I do everything just to create a file that will be useful to anyone (I don't know who it will be) edits my excerpt in a longer film.

  Thank you!

  Hi Greg,.

  See if this article helps you: export multichannel Quicktimes in Premiere Pro: part 2 | Strypes in Post

  Thank you

  Kevin

• Tab sequence and some UI elements user does not / do not update in CC

  In recent weeks, I have a particular problem with CC Premiere Pro.

  Tab sequence and all of that content no longer responding / don't redraw on all action that change the size of the tabs by dragging its borders or using change the next/previous change shortcuts. No other action redraws the UI. Actually, I'm flying blind.

  As part of troubleshooting, I opened an old project (CS6) on the CS6. It works fine in there. When you open the same project in first CC the described behavior occurs.

  I don't get the error messages.

  Seems to have started after one of the updates of the CC.

  Windows 7 64

  GTX 580 x 2

  Quadro 4000

  CC Pro first uninstalled, reinstalled, but refused to upgrade to 7.0.1.

  Chosen in addition deleted automatically option of a 3d app for CUDA NVIDIA settings panel and open gl and GPU attributed to the hand.

  Do not know yet, what not solved the problem, but it is fixed. Do not fix it anymore as I am on a deadline. Troubleshoot later.

• The use of sequence and generate the number in a table that has data

  Hello
  
  There is a custom table that has a column Rowid (NULL).
  This table already has 10 k with rowid as null lines, now the user asks me to enter a unique number for the Rowid.
  I created a sequence, but don't know how to use this sequence and generate numbers for the Rowid.
  
  Could you suggest.
  
  Thank you.

  "rowid" is an oracle reserved word and should be avoided. Perhaps "Rowid" between quotes or something.

  Here's how to "fill" a column by a sequence:

  SQL> create table t (id number, value varchar2(100));
  
  Table created.
  
  SQL> insert into t (value) select object_name from all_objects where rownum <= 10000;
  
  10000 rows created.
  
  SQL> create sequence idgen_sequence;
  
  Sequence created.
  
  SQL> update t set id = idgen_sequence.nextval;
  
  10000 rows updated.
  

  Given that the sequence was used all the 'id's will be unique.

• Scripts customized transformations: creating sequences and synonyms

  Is there a way to Data Modeler to describe the process of creating sequences and synonyms. I have already found how to create columns in a table, but it is also possible to create sequences and synonyms for tables? I watched it in the XML metadata, but I have not found where I was looking for? Can someone help me?

  Support more will be included as part of the XML meta data in the next version.

  Philippe