Search based on the start date and end date

Similar Questions

• The autodeploiement based on the Start Date

  Hello world
  
  I have a requirement that I take a stream of HR (GTC FF) and this user from IOM and AD based on the start date of the provision. Without taking into account the start date, I can do it by assigning a role that contains an access strategy for AD. Under certain conditions, I attribute this role based on an attribute in the HR feed with a ruler, I defined.
  
  then how I also factor in the start date in the rule I created which determines if the role must be assigned. It does not resemble the rule designer can handle anything, except for string literals. If I can account for the date, I could probably use a scheduled task to later assign roles to users based on their start date. so in this process I assign the role if the two attribute condition and departure date are met.
  
  I could take a different approach and say I'm not going to assign the role to all through the accession of any rule and just manipulate through scheduled tasks. I'm not sure I like this approach, but if that's the solution preferred, please let me know.
  
  Thank you

  I suggest the route of the scheduled task. Recon in your current values, including the start date. Create an another UDF which is a checkbox, or a few true/false, yes/no field type. In your scheduled task, find users who have a start date< current="" time="" and="" then="" mark="" the="" udf="" as="" the="" true/yes/checked="" value.="" in="" your="" group="" membership="" rule="" for="" ad="" provisioning,="" add="" a="" rule="" that="" checks="" for="" this="" field.="" this="" will="" then="" trigger="" the="" access="" policy="" to="" apply.="" i="" have="" used="" this="" technique="" before="" and="" it="" works="" very="" well="" to="" turn="" a="" field="" that="" you="" can't="" have="" a="" group="" membership="" rule="" on="" turned="" into="" a="" field="" that="" can="" have="" a="" rule="">

  -Kevin

• Win 7, no search box in the start menu and Explorer.

  Win 7, no search in the start menu and Explorer box, cannot use the function "search". The 'Windows search' is checked (selected) in the "Open/Close windows" function of the control panel.

  Anyone, please help me solve this problem.

  Win 7, no search in the start menu and Explorer box, cannot use the function "search". The 'Windows search' is checked (selected) in the "Open/Close windows" function of the control panel.

  When I press Win + F, invited an alarm windows, see the "research", no class registered!

  Use the system restore.

• Find the period by subtracting the start time and end

  Version: 11.2

  I am not a SQL expert.

  I'm trying to subtract the start and end time and find the difference between these two times.

  In the example below, the difference between the value of start_time and end_time is approximately 52 minutes (18:15 to 19:07)

  I tried a few tricks to find the difference below. But it did not work.

  SQL > create table t (start_time date, date of end_time);

  Table created.

  SQL > desc t

  Name                                                              Null?    Type

  ----------------------------------------------------------------- -------- ---------------------

  START_TIME                                                                 DATE

  END_TIME                                                                   DATE

  SQL > insert into values t (to_date (24 June 2013 18:15:42 ',' DD/MONTH/YYYY HH24:MI:SS'), to_date (24 June 2013 19:07:54 ',' DD/MONTH/YYYY HH24:MI:SS'));))

  1 line of creation.

  SQL > commit;

  Validation complete.

  SQL >

  SQL >

  SQL > select * from t;

  START_TIME, END_TIME

  --------------------     --------------------

  24 June 2013 18:15:42 24 June 2013 19:07:54

  -Trying to find the difference of Start_Time and End_Time

  SQL > select end_time-start_time in t;

  END_TIME-START_TIME

  -------------------

  . > 03625 than signifie.03625?

  -More than failure tent

  SQL > select to_number(end_time-start_time)/60 t.

  TO_NUMBER(END_TIME-START_TIME)/60

  ---------------------------------

  .000604167

  SQL > select to_number(end_time-start_time) * 24/60 t.

  TO_NUMBER(END_TIME-START_TIME) * 24/60

  ------------------------------------

  .0145

  SQL > select to_number(end_time-start_time) * 60 * 60 t.

  TO_NUMBER(END_TIME-START_TIME) * 60 * 60

  ------------------------------------

  130,5

  SQL > select to_number(end_time-start_time) * 60 * 60/24 t;

  TO_NUMBER(END_TIME-START_TIME) * 60 * 60/24

  ---------------------------------------

  5.4375

  Hello

  Search Date arithmetic in the manual of the SQL language.

  When you subtract one DATE from another, the result is the number of days between them.  .03625 days is a little more de.033333333... days, which is 1/30 a day, or 48 minutes.

  If you want the difference in hours, multiply by the number of hours per day, which is 24.

  If you want the difference in minutes, multiply by the number of minutes per day, or 24 * 60.

  If you want the difference expressed in days hours: minutes: seconds, then you are better off conversion (at least) one of the DATEs in TIMESTAMP; then, when you subtract them, you will get the difference as an INTERVAL DAY TO SECOND, which appears as

  + 05:06:37.000000 000000000

  This means that 0 days, 5 hours, 6 minutes, 37 seconds.

• I typed the letter e in the search box on the start menu, press ENTER. The screen went black. Press ESC, nothing, then ctrl + screen esc returned a second then went black, once again, then crash! What have I done?

  I typed the letter e in the search box of the start menu and press ENTER. My screen went black. I hit esc. control, Press esc. set up the start menu, then screen went black again then the computer crashed. What have I done? OS = vista Home premium

  Hey Mike,

  I'm unable to reproduce successfully what experienced you. Does this occur at any time using the computer?
  One thing, you can try to get more information about what happened to check the event viewer.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  For more information on what to look for in the event viewer, you can look at this article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
  Can't wait to hear back on your part.

• Determine if the end date is after the start date

  I have 2 date fields in a form.  When I click the button submit, that I'm trying to ensure that the end date is after the start date.

  Here is the code I use:

  var sDate = Date.parse (BackgroundInformation.Background.CheckingDateStart.rawValue);

  var eDate = Date.parse (BackgroundInformation.Background.CheckingDateEnd.rawValue);

  xfa.host.messageBox ("Start Date:"+ BackgroundInformation.Background.CheckingDateStart.rawValue ");

  xfa.host.messageBox ("eDate: sDate" + eDate + ":" + sDate);

  if(sDate > eDate)

  	{
  	valid = false;
  	fieldName += "Start Date is greater than the end Date."
  	}

  The message box displays the start date 2014-10-30 but sDate is Nan.

  I tried:

  var eDate = new Date (BackgroundInformation.Background.CheckingDateEnd.rawValue);

  sDate var = new Date (BackgroundInformation.Background.CheckingDateStart.rawValue);

  and when I display sDate says 'Invalid Date '.

  Any ideas?

  It should work...

  var sDate = BackgroundInformation.Background.CheckingDateStart.value.date.value;

  var eDate = BackgroundInformation.Background.CheckingDateEnd.value.date.value;

  xfa.host.messageBox ("eDate: sDate" + eDate + ":" + sDate);

  if(sDate > eDate)

  	{
  	valid = false;
  	fieldName += "Start Date is greater than the end Date."
  	}

• End date must CLEARLY not less than the start date, else it

  Hello

  I put DATE of BEGINNING of THE CONTRACT and END of CONTRACT fields on the form. These 2 objects (DateTime objjects), I pulled game tab of the palette and fell on my layout, fine design.

  Now, I try to put a validation than the end dat eshould not lower than the beginning, so I had a thread as below from Niall.

  http://forums.Adobe.com/message/1909551

  and I've done my coding FormCalc to the OUTPUT of the END DATE field as event title below,

  Please note that FormCalc
  End date must not less than the start date, else CLEAR-Begin

  var ACE
  var endDate

  As = xfa.resolveNode ("CUSTOMER..") RawValue Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_START_DATE")
  endDate = xfa.resolveNode ("CUSTOMER. Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_END_DATE") GLR awValue

  If (ACE > endDate) then
  xfa.host.messageBox ("end date is less than the departure date! End date is allowed")
  xfa.resolveNode (the "CUSTOMER". Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_END_DATE") GLR awValue = null
  endif

  End date must not less than the start date, else CLEAR-end

  I tried to VALIDATE, calculate, change events of END DATE, but nothing works!

  Can pls. Let me Kow how I optimize my requirement? I'm anewbie,

  Thank you

  If you use the exit event, you will likely have the same code on the date fields beginning and end, because they have an addiction to each other. Maybe better try the validate end date event, so that if a field is changed the event is fired. You can try the following to validate the event

  // Pls. note this FormCalc
  // End date should not less than Start date, else CLEAR it - Begin
  
  var stDate
  var endDate
  
  stDate = CON_START_DATE.rawValue
  endDate = $.rawValue
  
  if ( HasValue(endDate) ) then
      if (stDate > endDate) then
          xfa.host.messageBox("End date is lower than Start date! End date is cleared")
          $.rawValue = null
      endif
  endif
  1
  // End date should not less than Start date, else CLEAR it - End
  

• Windows cannot find C:\WINDOWS\system32\rundll.exe. Make sure you typed the name correstly and then try again. To search for a file check the Start button and then click search.

  I tried to launch my Spysweeper and found that is not there, then I re downloaded and I could not install it because it was already on my computer.  I went to the control panel to remove and got the message:

  Windows cannot find C:\WINDOWS\system32\rundll32.exe.  Make sure you typed the name correctly and then try again.  To search for a file, select the Start button and then check the search...

  What should I do?

  Hi gsrow,

  You can go there!

  Cannot find the Rundll32.exe file when you open the control panel:
  http://support.Microsoft.com/kb/812340

  Alternatively, copy the folder C:\Windows\System32\DllCache Rundll32.exe file to the System32 folder. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• analysis of filter based on the current date to the exercise YYYYMM

  In a filter for an analysis, I want to put in place so that the settings are based on the current date and format field I want to filter is based on a July - June fiscal fiscal month.  (IE. Today, 22/04/2014 should feed the month of exercise with 201410 field)

  Is there a simple formula that can be set, based on the date of the day that will work like this?

  Use this

  Replace (Cast (Year (CURRENT_DATE) as char) |) (case when month (current_date))<10 then="" '0'||cast(month(current_date)="" as="" char)="" else="" cast(month(current_date)="" as="" char)="" end),'="">

  Instead of these functions concat and casting If you use exercise and exercise name is good to go

  Thank you

  http://cool-bi.com

• specify the start date of subscription plan?

  How can I specify the start date for a subscription to a plan (as the land line + mobile for the plan of Britain)? I would like to be covered for the month of September. I have to wait until September 1 before you subscribe and pay?

  Thank you

  Rob

  RobIreland wrote:

  I have to wait until September 1 before you subscribe and pay?

  Hello and welcome to the Skype community.

  Yes, you do.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• PowerShell script to delete files based on the current Date

  I know using PowerShell Get-Date will look at the current date.  I would like to make a very basic PS Script that will remove a file over 8 days based on the current date.  According to me, with the help of a if/then the function will be necessary.  I am very new to scripting if Im not sure how the syntax is written.  Any help is appreciated.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• The search box in the Start Menu

  I typed a word in the search box and results list the files that I was looking for.  But also displayed are backup files I had created in December, copied to my hard drive external and then deleted from my PC.  When I looked in the properties file, it said they were in my user folder. I checked and they were not in the folder of the user, nor that they were in the trash.  I typed the name of one of these files displayed in the results of the search box in the Google Desktop Search with results 0 of this description files.  Windows suddenly developed ESP with these ghost files?

  Hi Chrisana!

  No problem. In Vista, choses things are a little different. Your problem is probably caused by the index not updated. The index is updated in the background, so I would check now to see if, in these last days the index has been updated and files of "shadow" will no longer appear. If the problem is not resolved, rebuild your index manually. It is a process in three easy steps.

  1. Open Indexing Options from the control panel or by typing "Indexing Options" in the search box of the start menu.
  2. Click the Advanced button. If you get a UAC prompt on the rise, click to allow.
  3. Click the Refresh button.

  Once the reconstruction starts, you can click OK/Cancel out Indexing Options. He finished in the background. Note that this may take some time to complete, I suggest to leave it before leave you for the day or head to bed. Otherwise, your computer may start slow as you try to use it while indexing happens. This is why the reindexing takes place in the background, normally.

  Good luck!

• updates Windows returns to the start-up and restart the portable computer

  I put a clean image of windows 7 on my laptop and started running the updates of windows. There were 200 +. They download and restarted the computer and start the installation. The problem is now that he gets so far installs it fails and he returned to the starting point and then restart the laptop and the process begins again. They only way I can get back to my computer through safe mode. Any suggestions?

  Try excluding upgrades recommended to install important updates and only load the Important updates first which should be updated about 159 200 not.

  

  

  If you get hung up refer to the latter.

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  If looking for updates to hang on a current installation,

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• The search box in the start menu may appear. What I nead to do?

  Hello world

  The problem: I do not consider the search box on the start menu.

  After that I did the following.

  I came from "Control Panel," "Appearance and personalization" to "Taskbar and Start Menu" to "Start Menu tab" click the "Customize" button to finish, and then click "use default settings".

  I don't have the desired result.

  What can be done. How can I find the search box
  Thank you, Daniel

  See if a new administrator account will fix the problem

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  If the problem does not occur in the new user account, then check out the following link to resolve the damaged user account.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• If you upgrade or change your plan, resets the start date?

  See the question above. I want to know if I upgrade/switch a plan, the start date of the subscription will be based on my initial contract or a new one?

  Not the start date is not reset. The payment date remains the same, the amount of charge are adjusted accordingly.

  Concerning

  Stéphane