U400 cannot start after the initial start of lenovo screen

Similar Questions

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• When and how can you synchronize browsers of two computers on the same account after the initial installation?

  I can't find any instructions on how to synchronize Firefox browsing data after the initial configuration is completed and the account is established. Everything that help guard reference section to be put in place, but not how to perform the synchronization operation after installation.

  Firefox syncs automatically, but you can force a synchronization by going to the Tools menu, and then click Synchronize now.

• Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

  I'm migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.

  Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?

  I tried without problem. I changed the ip address of the WLC several times.

  You must ensure that:

  1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.

  2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.

  Here is the procedure how to change the ip address of the interface (according to the doc of cisco):

  http://goo.GL/0BYqVT

  I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).

  HTH

  Amjad

• I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat to a fe

  I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat a few weeks before the software did not react more. After this time all pdf files can be manually opened with Adobe Reader, but not with Acrobat. Because Acrobat seems to be the default program to open pdf files, nothig happens if I double click on a pdf file, or if a pdf file to be generated from a site Web etc. At the beginning, I was able to reinstall Acrobat from the CD and it would work for a few weeks yet. This has been the case for the past three years. Now, even the resettlement option no longer works and the error message "Is not a real product from Adobe" is displayed during installation. As I said, all the other parts (Illustrator, Photoshop...) work fine and I don't have a product code, serial number etc. What could be the problem and how can I solve this problem? When I uninstall Acrobat, all PDFs open automatically via the Adobe Reader software. But I need more than just to read a PDF file. Help, please!

  Hi Andreas,

  Try the fix mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html

  Kind regards
  Rave

• Download CS6 yet once after the initial purchase if I have a computer problem?

  When I buy a copy of Adobe CS6 download, download CS6 once again after the initial purchase (no extra cost) if I have a computer problem and the software is corrupted?

  Also, what happens if my computer is stolen with CS6 installed software, can I cancel it and reload the software again on a new computer ?

  Hi chrysalis.

  Yes, you can download CS6 once again without additional cost.

  Please use the link as a backup for CS6 downloads below

  http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  Please post on the Adobe Forums.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• Cannot logon after the start because just passing simple / 8.1 Windows logon is not displayed

  It seems that if the application passes Simple (opvapp.exe) that allows me to enter the password/user does not start after the start.

  I can't start windows in safe mode because the button F8 Mode (I tried FN + F8) is not responding.

  What alternative should I solve the problem?

  Find a possible solution:

  -Press ESC to HP connection icon

  -Choose F11 and follow the instructions to start Windows in safe mode

  You can then use the system restore to solve the problem.

• After the update to Vista, welcome screen is recycled to disconnect. Starts in Mode safe mode only.

  After the last update, just slowed down, so I restarted my Dell Studio laptop. I noticed MsMpEng.exe was the biggest user of memory and still is. I lost the desktop configuration in mode without failure, as well as some sound themes, homepage, recent files, Windows security settings, etc. Internet Explorer re - starts NEW whenever it is open.  Typing jumps about. I rebooted and restored several times in Mode safe with no improvement except to return to items on the desktop. I lost all the restore points. Msconfig is the same as the previous (selective startup), without any news. I finally got Directory Services Restore Mode and disable UAC, but have still lost all my old settings and other features. Analysis of security shows no problem. I now can't change anything as the printer creation, probably because I don't have administrator privileges with UAC off the coast. Don't download FixIt. Is there something I can do? I used regedit before, but am not game to touch.

  Thank you, Dena, I restarted factory and now everything is fine. He did take 5 days to fix but. Thus, you can close this point. Thanks for your comment. Phil

• The db cannot startup after the crash of the host

  the db does not start after the crash of the host.
  
  
  
  Please see the following logs. the strange thing is "lkinstrdmetdev" is the fake name (sid is rdmetdev), and the file does not exist in the FS too. the correct file name should be "lkrdmetdev" and I removed this file from the directory. I did not make any changes. and not just any what oralce running process while I started the oracle instance. Help, please
  
  
  
  Thu Feb 14 09:25:20 IS 2013
  sculkget: failed to lock /u01/app/oracle/product/10.2/dbs/lkinstrdmetdev exclusive
  Thu Feb 14 09:25:20 IS 2013
  sculkget: lock held by PID: 272600512
  Thu Feb 14 09:25:20 IS 2013
  Failure of the operation of the Oracle Instance started. Another process may be to attempt to start or stop this Instance.
  Thu Feb 14 09:25:20 IS 2013
  Impossible to acquire primitive serialization for start/stop of the instance
  Thu Feb 14 09:35:33 IS 2013
  sculkget: failed to lock /u01/app/oracle/product/10.2/dbs/lkinstrdmetdev exclusive
  Thu Feb 14 09:35:33 IS 2013
  sculkget: lock held by PID: 125960160
  Thu Feb 14 09:35:33 IS 2013
  Failure of the operation of the Oracle Instance started. Another process may be to attempt to start or stop this Instance.
  Thu Feb 14 09:35:33 IS 2013
  Impossible to acquire primitive serialization for start/stop of the instance
  
  
  Thu Feb 14 09:34:57 IS 2013
  Errors in the /u01/app/oracle/admin/rdmetdev/udump/rdmetdev_ora_6321.trc file:
  ORA-27050: function called with invalid FIB/IOV structure
  Additional information: 2
  ORA-27086: impossible to the locking file - already in use
  Linux-x86_64 error: 37: no locks available
  Additional information: 10
  
  rdmetdev_ora_6321.TRC
  Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  ORACLE_HOME = /u01/app/oracle/product/10.2
  Name of the system: Linux
  Name of the node: ecamolx1813
  News Release: 2.6.18 - 194.el5
  Version: #1 SMP kills Mar 16 21:52:39 EDT 2010
  Machine: x86_64
  Instance name: rdmetdev
  Redo thread mounted by this instance: 0 < none >
  Oracle process number: 0
  The Unix process PID: 6321, image: oracle@ecamolx1813
  
  14-02-2013 09:34:57.630
  ORA-27050: function called with invalid FIB/IOV structure
  Additional information: 2
  ORA-27086: impossible to the locking file - already in use
  Linux-x86_64 error: 37: no locks available
  Additional information: 10
  14-02-2013 09:35:33.039
  Failure of the operation of the Oracle Instance started. Another process may be to attempt to start or stop this Instance.
  14-02-2013 09:35:33.051
  Impossible to acquire primitive serialization for start/stop of the instance

  Check the MOS document I posted.

• Installed Acrobat Pro, but cannot progress after the software license agreement screen

  Hi all

  I just installed Acrobat Pro, but when I run it, I get the Adobe Software License Agreement screen with no text inside and with the buttons of towing, Quit and Accept. I click on accept, but nothing seeems to arrive and I can launch Adobe Acrobat! It's really frustrating! I use MAc OS X 10.8.2

  Please can someone help.

  See you soon

  Hi Saviomfx,

  It is a known issue with Acrobat XI

  Issue: Mac OS only. The launch, a blank screen of the EULA is displayed, that cannot be accepted and Acrobat does not run. This problem can appear if you have any of the installed products of CCM or Creative Suite and you tried to install Acrobat XI from a different source.

  Solution: Launch any other product which is part of the CCM or Creative suite. Then, turn it off by choosing Help > deactivate. Quit the application. Then start Acrobat and accept the EULA. Then, for CCM subscription product, launch it and choose the license of this software to reactivate the product of the CCM. If a CS app, launch it and turn it back on.

  Please visit: http://helpx.adobe.com/acrobat/kb/known-issues-acrobat-xi-reader.html

  Or you can try this:

  Go to Applications-> Utilities-> Adobe Installers-> Adobe Acrobat X-> remove Acrobat X using the application uninstaller.

  Relaunch Acrobat XI and try to accept the EULA.

• To use Robocopy to copy files, but you will notice that after the initial backup, it ignores the unchanged files, but I don't want it!

  Hello

  I use robocopy in Windows Server 2008 R2 operating system.

  Here #1

  I would like to use Robocopy to copy a disc (z) files on an external drive (f) and want to "full backup" every time regardless of whether the files have been modified.

  How do I do that?

  I tried to use the command

  Robocopy z:\ketchup f:\ketchup/e

  It works very well if there is nothing in this record, but once the initial order has been executed. It will skip all files of unchaged but I want yet it backs up to the top anyway.

  Want to #2

  I would like also to add a unique name that includes the date and time I'm it backup (in essense a new backup folder name that contains the date and time).  Hoping to place it under scheduled tasks as soon as I get going.

  Thank you

  Jess

  Hi Jess,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro on Microsoft Windows Server public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Non-unique Jobticket.xml ID names after the initial transaction, what gives?

  Hi all

  We had a problem where the names of IDS Jobticket.xml created for each transaction are not unique beyond the first transaction after the restart of IDS.

  ID 12.2 using 2.5 / SO with DM 12.2 in an environment and 12.3 2.6/SO with 12.3 SE DM in another and train to perform double printing output for each transaction (e.g. RECIPIENTAFP and RECIPIENTPDF).

  We can see that the first transaction cross product double output (afp and pdf), and file names are correctly named our IDSRequestObject, including a name unique jobticket.xml.

  However, successive transactions simply increment the previous name of jobticket.xml with _0001, _0002, etc., and the names of output files are not updated accordingly.

  Could you tell if there is a setting in the fsisys/fsiuser, something in the IDSRequestObject or maybe a native config to code Docupresentment, so the names of reset/refresh/create a unique jobticket.xml for each transaction?

  We are using MQ and moving to JMS eventually, but which should probably not have an impact on the creation of names from jobticket to Docupresentment.

  While hoping that there is a simple answer we can have overlooked in our dev environment.

  Thank you!
  
  

  No worries of friends.

  Now, everything's fine.

  Thank you.

• vCAC 6.0 cannot connect after the creation of the tenant

  After the creation of a new tenant for use with vCAC 6.0, I disconnect from the default connection ([email protected]) and continue to go to the new URL and connection. When I do, my connection attempts fail. I followed the documentation and even used this blog entry as a reference to make sure I wasn't missing a step (vCloud Automation Center - vCAC 6.0 - addition of tenants - DailyHypervisor). After trying to connect with a users AD I created, I get the same error "username/password Incorrect name."

  Attached are the screenshots of the new tenant that I created.

  

  

  

  

  I didn't know all of the other signs on the site of the community with the people having this same problem, so I'm thinking I'm missing something important/simple. Any help you could provide would be greatly appreciated. Thank you.

  --

  Chris.

  You probably need to configure your domain Alias that your ad server is probably change the domain (if AD is configured to use an alias).