Similar Questions

• merge a result of one query with another

  Hi all

  I have a question that the result of the query should be considered as 1 column and the result of another

  TABLE 1:

  CREATE THE TEST_QUERY TABLE (EMP_ID, EMP_NAME VARCHAR2 (100), EMP_ROLE VARCHAR2 (100));

  INSERT INTO TEST_QUERY VALUES (1, 'Jack', 'Dev');

  INSERT INTO TEST_QUERY VALUES (2, 'Mike', 'Tester');

  INSERT INTO TEST_QUERY VALUES (3, 'Steve', 'Support').

  TABLE 2:

  CREATE TABLE TEST_QUERY1 (NUMBER OF EMP_ID, EMP_NICK VARCHAR2 (100), EMP_VALUE VARCHAR2 (100));

  INSERT INTO TEST_QUERY1 VALUES (1, 'ROLO', 'GOOD');

  INSERT INTO TEST_QUERY1 VALUES (2, 'POLO', 'BAD');

  INSERT INTO TEST_QUERY1 VALUES (5, 'ZHANG', 'POOR');

  my request of intent:

  SELECT count (p.emp_id), p.emp_id, q.emp_value, q.emp_nick test_query p test_query1 q where p.emp_id = group q.emp_id of p.emp_id, q.emp_value, q.emp_nick;

  Because I need to use more than 100 columns in table TEST_QUERY1, to avoid adding more columns in the group by I thought I can take the result of the column of table 1 separately and the result of the columns in table 2, then combine the two to aid WITH the Clause, but it did not work

  Query I wrote:

  WITH P ACE (SELECT count (T.EMP_ID), T.EMP_ID OF TEST_QUERY T, TEST_QUERY T1 WHERE T.EMP_ID = T1. GROUP BY T.EMP_ID EMP_ID),

  Q AS (SELECT S.EMP_ID, S.EMP_NICK, TEST_QUERY S.EMP_VALUE R, TEST_QUERY1 S WHERE R.EMP_ID = S.EMP_ID)

  SELECT P, Q.* P, Q;

  Please help me...

  You took your idea too far. Yes, it is better to GROUP BY before the JOIN, but you don't need GROUP by your second 'query '.

  Also, you left out the part of the join.

  Assuming that I understand your question, here's something:

  with P as (
    select count(*) emp_id_cnt, emp_id
    from test_query
    group by emp_id
  )
  select P.emp_id_cnt, P.emp_id, Q.emp_nick, Q.emp_value
  from P, test_query1 Q
  where P.emp_id = Q.emp_id;
  

• I need to display a search form web app, inside the detail of another web application view. Anyone know

  I can't seem to get a search form web app to work within another page of detail web app. Anyone know if this is possible?

  I can view a list of web app; and the search engine works on a standard page. but when I try to load it into another web application details page, I get an error: "page not found". In this case, regarless of whether if I put {module_searchresuts} on the same page as the form or if I redirect the results to a different page.

  Does anyone have any suggestions?

  Thank you, but I needed to get the search form and the results of the Web A app to show inside the detail for the Web App B model... Apparently is not possible. I finished by simply using an iFrame - inase anyone who crosses the same question

• How to review the Photos Smarfolders my search criteria?

  Hello.  I made several smartfolders in the Photos app, using demanding search criteria to group the images.  Now, I would like to add to these folders with newly imported equipment.  How can I see the search criteria, that I put initially for the smartfolders, please?  It would really help see what I did, so that I can adjust the keywords and descriptions of new elements to match the search criteria, I did for the smartfolders.

  Thank you.

  Control (right) - click on the smart album and select Edit Smart Album in the context menu.

  

  

• The search filter - how to get the value of the metadata entered by the user

  Hello
  
  I wrote a fixUpAndValidateQuery filter where I want to modify search QueryText.
  
  I tried to update some of the metadata values entered by the user and then let the fire search query.
  But I'm unable to get the values of metadata user has entered in my java code filter.
  I'm getting like below
  
  DocType string = binder.getLocal ("dDocType");
  
  It returns the value "no" even if the user gives the value of the Doctype in the search engine.
  
  Am I missing something here?
  
  Kind regards
  Rajendra

  Search filters tend to manipulate the query that ends up being called by the search service. If this isn't what you're trying to accomplish there are probably better filters for you before the actual query is run or after the query is executed.

  If you really need a connection of database at the moment and you can't find a better filter for what you're trying to do that has a database connection, you can always create one like:

  final Provider dbProvider = Providers.getProvider("SystemDatabase");
  final Workspace myWorkspace = (Workspace) dbProvider.getProvider();
  

  Warning: If configure you your own db connection for a filter where no database connection is available, you will need TO release the connection too.

  myWorkspace.releaseConnection();
  

  Published by: fscherpe on February 16, 2011 06:07

• How to add additional buttons, the fields in the query Panel

  I have a layout where I need to search for employees working under a Manager
  
  I have a search criteria where I can choose coach in a menu drop-down so that the data of employees under him appears
  
  
  Now I need to add a field more in search as assign to the manager who is a drop down
  
  And I need add two buttons Reassign, Deassign the search criteria
  
  
  So that when I select my manager current employees under him if poster and when I select the value of the entitlement and Manager dropdown in search criteria and click on the button to re-allocate employees are they assigned to this new manager... If I click on delete the key assignment those employees will get current Manager deassigned
  
  And also once the results displayed in table I have to have a checkbox for each record where I can select the checkbox and reassign or deassing only employees
  
  
  How to add additional buttons, fields for the Commission to request... I slipped and dropped my display criteria in the query with table Panel

  Hello

  a query Panel is for query and do not update documents. You can add buttons to the toolbar facet

  See: http://download.oracle.com/docs/cd/E21764_01/apirefs.1111/e12419/tagdoc/af_query.html

  but not the query itself on the ground

  Frank

• change / stop the query using bad plan

  I use 11.2.0.3.  I'm wrong a script with multiple insert into... Select.  One of the insert running for hours because it is using bad plan because of State statistics.   I've now updated the statistics. Is - it there anyway I can do oracle raise this insert or ignore this insert and continue with the other inserts in my script. (I don't want to kill the session, I want to run other sqls).

  Also, for the future is there a way to make oracle dynamic sampling rather than obsolete statistics usage?

  I was able to cancel the query in another session to help

  execDBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_SESS (sid, serial#, 'CANCEL_SQL');

• Add search criteria to the customer Search Page

  Hi all

  I have a requirement to add additioinal search criteria to the customer search page. Order Management Super User-> client-> Standard

  / Oracle/Apps/AR/cusstd/srch/WebUI/ArPrtySrchPG

  
  

  I want to add number of Site Search additiional. I tried to add a lookup field using customization, but the addition of the field does not appear on the screen. I tried to find out how the where clause is implemented through the related CO I found that the search fields are implemented using a matching HZ_ORG_SIMPLE_SEARCH_RULE rule.

  
  

  Is it possible to add the additional field matching this rule? Otherwise how can I advance to this requirement? Please suggest

  
  

  
  

  Thank you

  Pravin
  

  Found the solution...  Adding that it might be useful for others...

  Steps to follow:

  1. create the custom match rule by copying standard.

  2. add additional fields to the matching rule and specify a transform.

  3 compile the custom matching rule

  Finally, update the profile option to point to the custom matching rule. In my case it was HZ: associate the rule for the Simple and HZ research organization: associate the rule of advanced search for organisation

  Thank you

  Pravin

• Search for a product on the site of Muse-BC will not redirect to the page of results of product - return an error.

  I built a site of e-commerce in Muse and linked with BC. The site works fine, but it needs a search function.

  I added the "Site Search" form successfully and it was working fine, but the results page does appear as a list. After some research, I found that the 'Search' module product is what I need. I've added to the site, and I see that I have followed each step of the tutorial correctly, but the results page (which is a redirect in the code) will not work. He brings just the error message:

  Page not found

  We could not find the requested Web Page. This is either because:

  • There is an error in the address or link.
  • You have entered the address or link incorrectly.

  Click here to return to our Home Page.

  The search code is added to the header of a page in Muse, and module results {module_productresults} is added to the page of redirection in Muse.

  The site is www.thecookshopross.com, and the search box is currently in the header of the 'Sale' page while I'm working on it.

  Can need a very urgent correction - anyone help?

  Thank you

  Karine

  Hi Mika,

  Check this screenshot

  

  Change the PageID = / Search - Results.html to ID = / Search - Results.html

  Let me know if you have any question.

• Cannot change the Google search criteria in Safari

  I have a MB Pro OS X El Capitan 10.11.12 running version 2015.  My default search engine is Google.  After the recent update, whenever I'm looking for something in the Apple search bar in Safari, it will bring me to the page of Google results as usual, but if I want to change the search criteria in the search bar (not the Apple search bar), it won't let me.  It won't delete, add, or change the search criteria in the Google search bar in the Web page.

  I tried Yahoo and Bing and both work very well.  I also tried Google on Firefox and it works fine too, there must be something with Safari.

  Any suggestions?  Does anyone else have this problem?

  Ugh! I just figured this out, the simplest thing too.

  There is a dialog box on the google page saying something like "Download Google Chrome" and you can click on the x to close that.  Once you do this, the search bar can be changed again.

• When, on my home page, I click on the link "transparent popup" in the query "did you mean: transparent popup", NO RESULTS appear in this new tab; How to solve?

  I had trouble due, apparently, to a file named popuptransparent [dot] xul, which I have 3 cases on my computer (Win XP/Firefox last v.). Using my window of AVG home page, I get "popuptransparent" (try to fix) and the results appear OK. But then when I click to a new tab, on the "transparent popup" link in the query "did you mean: transparent popup", NO RESULTS appear in this new tab. In addition, when I reload then the Panel of AVG which sought to 'popuptransparent' in the first place, it, too, shows now no results. Or a panel shows Google now no results. They show the quantity of results, but just white screens for the results themselves.

  Links https://support.mozilla.org/en-US/questions/948804?esab=a & as = aaq and https://support.mozilla.org/en-US/questions/952141?esab=a & as = aaq brings me. I re-installed Firefox v. 20.0.1 nothing works. How to fix?

  Should I remove it from my computer all 3 of these instances of xul [dot]?

  Regarding the problem of searching, you can check the extension "Disconnect"? I think it could affect the Google sites and third parties who use Google. You can disable or try its button Options here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

  While you're there, you can disable all extensions essential and unrecognized. When in doubt, turn off.

  After restarting Firefox, did you notice a difference?

  Could you explain in more detail the next part?

  Should I remove it from my computer all 3 of these instances of xul [dot]?

  Is this something that came in a security sweep? What question do you think they are originally? They are located in a folder extensions?

• I use the start page mozilla firefox as my home page, because I can restore my previous session. A game I have DL friends that Bing my search engine on this page! In Internet Options, I changed my default to google, but it search Bing every time! How can

  I do a search, and it diverts to MSN game site, then gives Bing search results. Bing isn't my search anywhere engine, just on the Mozilla page.

  Change of the topic: Home search engine to Google.

  With the subject: House showing homepage:
  
  Firefox button > Web Developer-> Notepad.
  Copy and paste this script into Notepad > then click on run > run

  javascript:{localStorage["search-engine"]="{\"name\":\"Google\",\"searchUrl\":\"http://www.google.com/search?q=_searchTerms_&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a\"}";void(0);}
   

• You can use spotlight search to find which page the word is on a document?

  I use PDF files a lot, and I'm often looking for a specific word in the document. Is it possible to use spotlight or the finder, search open to a page where a specific word is inside this PDF or document (without opening the PDF file and use CMD + F)?

  Yes, I searched the word: AudioUnit, in Spotlight.

  

  Press return, the PDF file opened in preview:

  Press back again & I was redirected to the page with the word I was looking for.

  

  NB. Check system preferences > Spotlight > results & ensure that the PDF Documents is checked.

• [JDev ADF] How 1) auto - submit search Query Panel when loading the page and 2) 'secretly' proceed to the query a param

  Hello

  in my page, there is a "query with table Panel" created from all the "named criteria | All the attributes of a"of a display object.

  The request of this display object has in its where clause 1 param required.

  When JDeveloper creates the "query with table Panel" it adds to the search also fields that the param required of the View object.

  The user doesn't have to choose the value of the param: I secretly turn the param to query and to hide the search field in the "query with table Panel".

  The query must always be performed with the param I secretly put (reading the value of a managed bean).

  You kindly help me?

  Thank you

  F.

  For this you must intercept the query and add your parameter. You can use the criteria to view "All searchable attributes" for this because this IC is to build implicit and you cannot change it. However, you can create your own CV and imitate the "all attributes searchable" vc. In the t create a new Victoria Cross and all all the attributes of the query itself. One you don't want to see you can hide (like the rohanwalia post).

  Then, you must use the technique described in this blog https://blogs.oracle.com/aramamoo/entry/interpret_af_query_s_queryevent but instead to display the context menu, you set the bean to your hidden setting viewcriteria line.

  Timo

• I want to create a Web site where people can choose a date and time and click on search, and it will find the photo of my HARD drive and show them on the page, is that poosible? If so could somone tell me how I will pay?

  I want to create a Web site where people can choose a date and time and click on search, and it will find the photo of my HARD drive and show them on the page, is that poosible? If so could somone tell me how I will pay?

  On your local HARD drive? N ° on your web server? Course

  How do you know php? There are exif function that can read EXIF headers on your images. You can use it in conjunction with the functions of file system scanning of the images on your web server. If you have thousands of images, you want to index the results in a database rather than search the real-time file system.