Search string and shorten

Hi all! I'm kinda new to labview, but I learn right.

I get a response from a picoammeter in the form of a string that contains the current and then of junk that I subsequently. Every thing is separated by a comma if I want to search the string to the comma and then cut the comma and after that all keeping the data that comes before the comma. I am struggling to find a good way to do it. Someone point me in the right direction? Thank you!

Use 'match model' in the range of string with a comma as a model, and then use the exit 'before the substring"(the top terminal) for the purpose.

Tags: NI Software

Similar Questions

  • search string and convert whole real or 8-bit 32 bit

    I was hoping to get some advice on how I could search for the following string and convert it to a real number or an integer.  The following data is output as a device ascii characters and I would look for both in each line (starting with 7699,72 seconds in this case) and convert each one to a real number.  Furthermore, I would like to get the integer values in each row (0, but could be 1,2,10,12, etc.) and convert them to an 8-bit integer.  I think that using the template Match followed by analysis of chain would screw that I need, but am not sure how to match in each case. Thank you!!
















    7699,72 0

    7699,74 0

    7699,76 0

    7699,78 0

    What are the characters in the white space between the and the numbers?

    Scan chain can probably not what you want.  Note that in the image space characters include spaces, return carriage, line breaks and tabs.

    Lynn

  • The search for exact strings (and the right formula)

    I am using FIND instruction to search multiple strings in a larger formula. The original formula that I do stand out is the following:

    = IF (ISNUMBER (FIND ('INC', A1)),' ', 'Y')

    Of course, this gives a Y if he finds some text in "". "" However, I have several channels for which I would check, and they need to be exact. That is to say when I search Inc. and Inc., I don't want Inc. to be counted. So, I tried the following formulas.

    = IF (ISNUMBER (FIND (OR("INC",inc"), A1)),' ', 'Y')

    = IF (SUM (COUNTIF (A1, "* INC. *","{* Inc. *}")),' ',' Y')

    The second works better, but it also counts Inc. as a football game. Any suggestions?

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • How to search string in the window layout and paste it inside the element?

    I'm new to indesign to animals. Learn extendscript for automation.

    I need to paste a string copied instead of '< media >' element in the window layout like the image below.

    inde.JPG

    But I do not know how findgrep in window(ctrl+y) layout rather than the editor.

    I have a script to copy - paste into the active document at the specific position of specfic chain. But, I need to glue between the element of "< media > < / media > '."

    For example:

    If search string = "FIG. 1.1", so I want the copied string to be pasted into the document as below

    WINDOW LAYOUT:

    < media.block id = "001" Fig. > < media > < / media >

    < caption aid: pstyle = "Caption" > < num > FIG. 1.1 & #x2002; < / num >

    < para > < txt > the range of disciplines engaged in research and development

    in the field of nanoscience and technology. < / txt > < / para > < / legend > < media.block >

    OUTPUT:

    < media.block id = "Fig001" > < media > * PASTE STRING * < / media >

    < caption aid: pstyle = "Caption" > < num > FIG. 1.1 & #x2002; < / num >

    < para > < txt > the range of disciplines engaged in research and development

    in the field of nanoscience and technology. < / txt > < / para > < / legend > < media.block >

    I have a script to paste into the current document rather than the window layout.

    App.Open (file (myFigDoc));

    app.activeDocument.pageItems.everyItem () .select ();

    App.Copy ();

    app.activeDocument.close ();

    app.findGrepPreferences = app.changeGrepPreferences = null;

    var figString = "FIG." + chapno + "'." + j; "

    app.findGrepPreferences.findWhat = figString; Figure legend text

    app.findGrepPreferences.appliedParagraphStyle = "FigureCaption"; Figure caption Style

    myFinds = app.activeDocument.findGrep ();

    for (var i = 0; i < myFinds.length; i ++) {}

    myFinds[i].insertionPoints[0].contents="\r ';

    myFinds [i] .insertionPoints [0] .select ();

    App.Paste ();

    }

    How do in the window layout?

    Try this,

    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;

var myDoc = File("/D/template-sample.indd");//Figure File
var myFigDoc = File("/D/fig1.indd");//Destination File

app.open(File(myFigDoc));
app.activeDocument.pageItems.everyItem().select();
myObj = app.selection;
app.copy();

app.open(File(myDoc));
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "FIG. 1.1";//Figure caption text
app.findGrepPreferences.appliedParagraphStyle = "Caption";//Figure Caption Style
myFinds = app.activeDocument.findGrep();
alert(myFinds.length)
for(var i=0;i

  • Is it not possible to get (or use) a search string that includes a reference object?

    Hello world

    I try to get the full search string property for the property "xl" seen below at the bottom of the image.

    I can go as far as the other results [0] (which is a reference), but after that, it seems not possible to access the "xl".

    "TS. SequenceCall.ResultList [0]. TS. SequenceCall.ResultList [0]. TS. SequenceCall.ResultList [0]. "AdditionalResults [0].

    If I get the interface for the object of 'xl' and then ask 'place' in what concerns the "MainSequenceResults", I get an empty string.

    Get the property for container objects and properties in the object "xl" also give the same result when I call «GetLocation (...)» with the MasterSequenceResults the TopObject property.

    Is it not possible to have a search string that includes a reference object?

    Thank you

    Ronnie

    Hi Ronnie,.

    It is possible, but to get this value, you can use the TestStand API. I have attached a sequence file that shows how to get the values of reference of object using AsPropertyObject, and then the associated GetVal method. It is much easier to understand with an example. Let me know if you have any questions about the sample file of sequence.

  • Write a string and an integer and a table all in the same file?

    Hello

    I am currently it several different types of values with LabView.

    I have a shot, a few numbers and several paintings.

    Thus, for example, I have a timestamp of the chain, several values of "integer" amplitude of the signal for example, RMS value, frequency and I have several paintings - table of signal, the FFT (PIC and location) values.

    Basically, I'm trying to find a way to write all the values in a single file. I can write all the individual types to separate files (so I can write the RMS, amplitude and frequency to a single file, some of the tables in the other)
    but is it possible to write a string and an integer and a table all in the same file?

    Pointers would be much appreciated,

    Thank you

    Paula

    Your file will be all text... any format in a table of text, to build as a single table, "table chain worksheet", to write to the file.

    (I'm sure this has been on the forums before... a search it would have thrown upward)

  • Boolean search string limitation

    When we enter a search string more than 10 words to Boolean searching for example chicken gun to GOLD OR ask brother GOLD flooding of the housing or the curry house GOLD OR GOLD OR fish Apple GOLD dog OR bird OR duck OR the request fails. Is there a way to fix this?

    You get an error message?  Or not the query returns simply no result?

    There is a dgraph flag that controls the maximum number of terms to assess when a search is called search_max.  This default value is 10, which makes me think that she might be related to your problem.  In a standard search mode, I thought it all starts with the 11th ignored word but Boolean may behave differently.

    If you try to add a - search_max 20-your dgraph and test again, I would be curious what your results are.

    Patrick Rafferty

    http://branchbird.com

  • A search string / number fields

    Hello! What I'm trying to do is create a page to request for my users that allows them to enter a search string (var = #string #), and then click the check boxes that correspond to the values that they want to search for the string in field (var = #paramSelect #). Unfortunately I have not been able to do this job properly and was hoping that someone here might be able to help me with this. So far, I have tried the following methods:

    If paramselect is not set, or a list?
    And you know how to loop through a list?
    And you know what you want to do if it is not set?

    If you answer Yes to these three questions, which is the part that you are having problems with? Also, a list can contain a single element and still be considered a list.

  • REF Cursor with search string

    Hello all,.

    I'm trying to implement a procedure that returns records in the hr.employees table when search strings are passed.

    Here is the package:
    create or replace package search_app 
IS
--
TYPE emp_rec IS RECORD (last_name     hr.employees.last_name%TYPE
                                     ,first_name    hr.employees.first_name%TYPE
                                     ,job_id        hr.employees.first_name%TYPE
                                     ,salary        hr.employees.salary%TYPE
                                     ,dept          hr.departments.department_name%TYPE
                                     );
--
TYPE emp_curs  IS REF CURSOR RETURN emp_rec;
--
PROCEDURE  get_employees (p_last_name_search   IN  hr.employees.last_name%TYPE
                                         ,p_first_name_search  IN  hr.employees.first_name%TYPE
                                         ,p_job_id_search      IN  hr.employees.job_id%TYPE
                                         ,pr_emps              OUT emp_curs
                                         ,p_error              OUT VARCHAR2
                                         );
--
END search_app;
/
--
create or replace package body search_app
IS
--
PROCEDURE get_employees (p_last_name_search    IN  hr.employees.last_name%TYPE
                                        ,p_first_name_search  IN  hr.employees.first_name%TYPE
                                        ,p_job_id_search      IN  hr.employees.job_id%TYPE
                                        ,pr_emps              OUT emp_curs
                                        ,p_error              OUT VARCHAR2
                                        )
IS
--
  v_last_name_search       hr.employees.last_name%TYPE;
  v_first_name_search       hr.employees.first_name%TYPE;
  v_job_id_search             VARCHAR2(100);
  v_error_msg                  VARCHAR2(200);
--
BEGIN
--
  OPEN  pr_emps FOR
--
      SELECT e.last_name
                 ,e.first_name
                 ,e.job_id
                 ,e.salary
                 ,d.department_name as dept
      FROM hr.employees    e
              ,hr.departments d
      WHERE (e.first_name LIKE p_first_name_search
                   AND
                 --OR   
                  e.last_name  LIKE p_last_name_search
                   AND 
                --OR  
                   e.job_id     IN   p_job_id_search
                 )
      AND    d.department_id = e.department_id;
--
    p_error := v_error_msg;
--
EXCEPTION
--
WHEN OTHERS THEN
   v_error_msg := SUBSTR(SQLERRM,1,200);
END get_employees;
--
END search_app;
/
sho error

---
here is the stub I am using to test.
--
set serveroutput on size 1000000
spool search_app_OR.log
--
DECLARE
--
  v_first_name_search     hr.employees.first_name%TYPE;
  v_last_name_search      hr.employees.last_name%TYPE;
  v_job_id_search           VARCHAR2(100);
  my_emps                    search_app.emp_curs;
--
  v_first_name            hr.employees.first_name%TYPE;
  v_last_name             hr.employees.last_name%TYPE;
  v_job_id                  VARCHAR2(100);
  v_salary                   hr.employees.salary%TYPE;
  v_dept_name           hr.departments.department_name%TYPE;
  v_error_msg             VARCHAR2(200);
--
  v_count                   PLS_INTEGER;
--
BEGIN
--
    v_first_name_search := '%';
    v_last_name_search  := 'De%';
--        v_job_id_search := '%';
    v_job_id_search     := chr(40)||chr(39)||'AD_VP'||chr(39)||','||chr(39)||'SH_CLERK'||chr(39)||chr(41);

--
     search_app.get_employees(p_last_name_search   => v_last_name_search
                             ,p_first_name_search  => v_first_name_search
                             ,p_job_id_search      => v_job_id_search
                             ,pr_emps              => my_emps
                             ,p_error              => v_error_msg
                              );
--
     LOOP
--
        FETCH my_emps INTO v_last_name, v_first_name,v_job_id, v_salary, v_dept_name;
            EXIT when my_emps%NOTFOUND;
--
        DBMS_OUTPUT.PUT_LINE ('...last_name : '||v_last_name);
        DBMS_OUTPUT.PUT_LINE ('...first_name: '||v_first_name);
        DBMS_OUTPUT.PUT_LINE ('...job_id    : '||v_job_id);
        DBMS_OUTPUT.PUT_LINE ('...salary    : '||v_salary);
        DBMS_OUTPUT.PUT_LINE ('...dept      : '||v_dept_name);
        DBMS_OUTPUT.PUT_LINE ('...error_msg : '||v_error_msg);
--
     END LOOP;
--
     v_count := my_emps%ROWCOUNT;
--
     CLOSE my_emps;
--
        DBMS_OUTPUT.PUT_LINE ('v_last_name_search : '||v_last_name_search);
        DBMS_OUTPUT.PUT_LINE ('v_first_name_search : '||v_first_name_search);
        DBMS_OUTPUT.PUT_LINE ('v_job_id_search       : '||v_job_id_search);
        DBMS_OUTPUT.PUT_LINE ('num rec fetched      : '||v_count);
--
 EXCEPTION
     WHEN OTHERS THEN
       v_error_msg := SUBSTR(SQLERRM,1,200);
       DBMS_OUTPUT.PUT_LINE ('error: '||v_error_msg);
END;
/
spool off
    The results I get are as follows:

    When I OR in the request for get_employees for search parameters, 106 records are returned.

    When I AND in the application, not of records returned is 0. It should return 2 records. Why is it not return all records? Any suggestion on how this procedure should be applied?

    Thank you

    Raman

    Published by: rxshah on June 8, 2010 12:52 AM

    Hello

    The problem is that you try to implement a dynamic list in a static SQL statement:

    job_id IN '(''AD_VP'',''SH_CLERK'')'

    It will not work like that.

    Check out these links for some tips:
    http://tkyte.blogspot.com/2006/06/varying-in-lists.html
    http://asktom.Oracle.com/pls/asktom/f?p=100:11:1242571115131928:P11_QUESTION_ID:110612348061

  • search options disappeared after updating firefox to address the slowness. How to make a comeback (there is no default search engine and no option)?

    the search box (with a magnifying glass to the left of it) is completely insensitive and there is no search option in the options of the menus/screens. Assistance from the address field in the search bar appears only intermittently to perform an Internet search for key words. a solution would be greatly appreciated.

    You can check if you have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder.

    If this isn't the case, then you need to reinstall Firefox.

    Try to delete the file search.json and possible search - metadata.json and search.sqlite files in the profile folder of Firefox to reset the default search engines.

    You can use this button to go to the Firefox profile folder currently in use:

    Firefox will rebuild the file search.json from the default search engines in the folder "browser\searchplugins" in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

  • I cleaned the Bing FireFox and now have no. search engines and cannot install everything.

    Got a crappy version of bing, used your cleaner reboot and now I have NO search engines and that you do not arrive within FireFox, the search selector is in any way and I have now NO search engine any.

    Mozilla, like most free software developers, don't have the ability to run a telephone support line. We are actively working to win the support however bogus sites.

    I'm glad it works for you now!

  • By clicking on the address bar or search bar and typing does not erase the previous text inside

    When I click on the address bar or search bar and start typing a new entry, it does not erase the previous text. I always have to remove it first to clear the field and then I can type in the new URL or keyword...

    OK, I found the search the on: configuration database. The problem is that browser.urlbar.clickSelects.All is set to "false". I changed it to "true" and now everything is perfect...

    Also to solve the same problem with the search bar, I changed browser.search.context.loadInBackground from false to true.

  • Search bar and address bar does not work when a new tab is opened

    When a new tab is opened, or the search address bar or research on the work of the page. All in all, nothing happens when you click search or click the arrow.

    Try to delete the file search.json and possible search - metadata.json and search.sqlite files in the profile folder of Firefox to reset the default search engines.

    Firefox will rebuild the file search.json from the default search engines in the folder "browser\searchplugins" in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

    You can use this button to go to the Firefox profile folder currently in use:

  • Lost the search bar and now to see the clock in the search bar

    Search bar no longer works. I have reset Firefrox and that did not help. Maybe he thinks that Trojan.

    Try to delete the file search.json and possible search - metadata.json and search.sqlite files in the profile folder of Firefox to reset the default search engines.

    Firefox will rebuild the file search.json from the default search engines in the folder "browser\searchplugins" in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

    You can use this button to go to the Firefox profile folder currently in use:

    • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

    You can check if you have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder.

    If this isn't the case, then reinstall Firefox to get all search engines by default.

  • I have no enigines research listed in my "manage search engine list" and the "Show search", "Get more search engines" and "Restore Defaults" do not work.

    There is nothing in the list of search engines manage and nothing works to get them. Help!

    You can check if you have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder.

    If this isn't the case, then you need to reinstall Firefox.

    You can find the full version of the current version of Firefox 31.0 in all languages and for all systems operating here:

    Try to delete the file search.json and possible search - metadata.json and search.sqlite files in the profile folder of Firefox to reset the default search engines.

    Firefox will rebuild the file search.json from the default search engines in the folder "browser\searchplugins" in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

Maybe you are looking for