Searching for the VMware solution

Similar Questions

• Search for the text value data store

  Hello, I have a PDO of data to store, and I would like to search for a text value in a quantity of measure.  In each of my test series, there is a quantity of measure with the name TCNAME and stores the cell name of test in the string format.  I would like to get all the TCNAMEs that contain "TC4" for example.  Currently, I have to load TCNAME in the portal and display it in an array of string.

  Any ideas how I can do this?

  I assume you are using a PUMA testbed that stores this kind of goods on a unique value chain chains.

  There is no direct search method, so I guess that a script is the only solution we can offer.

  Datafinder you can search for the minimum and maximum of a channel. That would be too much work in the store of ASAM.

  "PDO / cpp"
  
  protected tcnameMQs: set tcnameMQs = store. GetElementList ("MeasurementQuantity", "name = TCNAME", true)
  
  protected tcnameMQ: for each tcnameMQ in tcnameMQs
  
    MsgBox tcnameMq.References ("local_columns"). Elements (1). Properties ("values"). Value
  
  Next
  
  ' AOP5 / Corba
  
  protected tcnameLCs: set tcnameLCs = store. GetElementList ("LocalColumn", "measurement_quantity.name = TCNAME", true)
  
  protected tcnameLC: for each tcnameLC in tcnameLCs
  
    MsgBox tcnameLC.Properties ("values"). Value
  
  Next
  
  

  I have added the example which should be the shortest path from my point of view. In AOP5, you can search LocalColumn and spend BA which is less overhead.

  It is perhaps a good idea to post-processing of the data base and crush the decription "Test name" by

  "The test cell name == NAME. You can search not post-processed by Searchin' for.

  protected tcnameMQs: set tcnameMQs = store. GetElementList ("MeasurementQuantity", "description = name of the test cell", true)
  
  protected tcnameMQ: for each tcnameMQ in tcnameMQs
  
    tcnameMQ.Properties ("description"). Value = "name of the test cell is" & tcnameMq.References ("local_columns"). Elements (1). Properties ("values"). Value
  
  Next
  
  Store.Save

  Thereafter, you would be able to search for it.

  Greetings

  Andreas

• Search for the nearest value table

  IM wondering if its possible to find a 1 d table worth, if it is not found, then find the nearest match. IM using the 'double' data type and I need at least an accuracy of 4 decimal point in the research.

  For now, im rounding decimal values to the nearest integers from you, but it is not effective at all. Im getting a lot of unwanted split in the plot. I need to be able to search for the decimal points. I found this function "About Equals.VI" starting from a previous thread. Even that uses the concept of the rounding.

  I enclose 3 screws "0.8 & 0.4.VI" are that I created, rounding decimals nearest digit.

  The "approximately equal" is the one I found online.

  The 3rd is I try to mess with what I can find as close a match.

  Y at - it a trick to work around this problem?

  Thank you

  Eureka

  This VI uses the first type of step 3 in your data.  Since you said that you can get the data, you can drop the in VI.

  At the end where I calculate the slope, you can use a linear adjustment if you have full or professional LabVIEW.

  

  

• my c drive shows low disk space, so I searched for the program that holds more memory on drive c. I got to know that this pagefile.sys has 3 GB in the c drive

  Hi, my c drive shows low disk space, so I searched for the program that holds more memory on the c drive. I came to know that pagefile.sys has 3 GB in the c drive, kindly guide me to move the pagefile.sys to another drive.

  Hi jafrin.michel,

  Thanks for posting in the Microsoft community.

  Before you start the troubleshooting steps, I need the information required.

  What version of the windows operating system do you use?

  Method 1:

  If you are using windows 7, I suggest to perform a disk cleanup and verify.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  If you want to move the pagefile.sys to another drive, follow the steps and check out them.

  Follow these steps to move the pagefile.sys to C: drive on D: drive (if you have the drive D :).

  1, write click on my computer and select Properties.

  2, click on the Advanced tab.

  3, click settings under performance menu.

  4, click on the Advanced tab and click on change.

  5, select letter (C :) and "BOLD" No pagefile then click on Set. )

  6, if you want to configure pagefile.sys in, select drive D: drive letter D: and "BOLD" in the custom size or the size of the system managed , then click on Set. It displays a pop-up message click OK.

  7, again click apply and OK OK.

  8, the system you will be asked to reboot, click on Yes.

  9, after rebooting the system, you can see the pagefile.sys will be moved to D:

• My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  If you forget to say 'thank you '?

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  0 x 80073712 ERROR_SXS_COMPONENT_STORE_CORRUPT component store is in an inconsistent state.

  TaurArian [MVP] 2005-2010 - Update Services

• title search for the words HTTP and 404. __

  I am unable to get the photo galleries to display on this site that I would use often:http://english.vietnamnet.vn/en/vietnam-in-photos/349/hanoi-s-folk-festivals-in-old-photos.html

  Technical information (for support personnel)

  • Go to Microsoft Product Support Services and perform a title search for the wordsHTTP and 404.

  Hi Gowest,

  • Were you able to see the photos earlier on this site?
  • Are you able to see the pictures on other sites?

  This seems to be a problem with the Web site. Even I tried to access the link and I was unable to see the pictures on this particular link and it shows red x instead of the image and clicking on it gives the same error you posted.

  You can communicate with the support of Web site to check if they have any problems with the images in the link of the Web site.

  I hope this helps.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

  "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

  Hi Jack,

  This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I tried to search for the file opm.db in the OOBE folder, but it is not there.

  I tried to search for the file opm.db in the OOBE folder, but it is not there.

  I turned off my computer and back then and it works now.

• query to search for the user of the application

  Hello
  
  What is the query to search for the user of the application in the sql command?
  
  I tried the query below

  select app_user from dual;

  app_user invalid identifier

  Thank you.

  Hello skud,
  The following SQL statement will give you the APP_USER which is an environmental variable in the APEX:

  SELECT v('APP_USER') FROM DUAL;
  

  See if it works. As I used the syntax given in the triggers to record audit trail above and it works fine.
  Kiran

  Published by: chubby Kiran June 11, 2011 04:08

  Published by: chubby Kiran June 11, 2011 04:09

• Search for the last occurrence of a substring

  How to search for the last occurrence of a substring in a string? In more detail: I have the array with the names of files, and I want to split the file name extension in a separate column. The name extension doesn't have a fixed rate with (can be 'c', "" jpg"or"mpeg", etc.), and names of files themselves can contain points (if this is possible:"recording.of.last.meeting.mpeg".)
  
  So the only way to extract the name extension is to look for the last appearance of a dowry and split on everything after the last point. How can I do this? I worked with a sybase database before and there was a string function to search for the right of the string. Is there something similar in Oracle?

  If you're on 10g, you can

  with t
  as
  (
  select 'recording.of.last.meeting.mpeg' file_name from dual
  )
  select regexp_replace(file_name,'^.+\.') fiel_extension
    from t
  

• When I type a letter (not when text entries are selected; i.e. for navigation not writing) the browser will automatically search for the letter.

  I use letter keys to navigate often, but recently everytime I try, the browser automatically will pop up 'Find in page' and look for him.

  Have you checked the setting in "Options/Preferences > advanced > general" (topic: preferences #advanced)?

  • Accessibility: "search for text when I start typing.

• A folder of bookmarks disappeared, but when I search in the sidebar for some sites, they appear, then how to search for the folder?

  The folder has disappeared from the sidebar and I get each of the other folders, but not luck. Yet when I do a search of bookmarks for entries individually, they appear. But it is essential that find the folder to my work because I don't remember all items [300 or more] and their URLs. The search function does not search for files, which is a real problem.

  Hi, you could have a look at your profile. Or, have you tried to restore from backup - open bookmarks > show all bookmarks > import and backup > restore.

• How to search for the artist in the iTunes Store app

  I am only looking for artists and never for anything else. Never for a specific song, never for no music. seems that the artist is the most obvious way searching for music. I'm I missed something?

  Where is "search by artist"?

  Just type the name of the artist. Yes, you'll see a number of results - some of which may be other than the music media. I don't know what you expect. 'Artist' without things like Albums, songs, videos produce almost a meaningless result.

• My search for the addr.bar engine is google and in the search bar - wiki en. But now, the search bar engine overrides the addr.bar one. I want to change this

  About: config keyword.url is set to http://www.google.ru/search?hl=ru & q =
  In the my search engine search bar is en wiki.
  At the moment the engine chosen in the search bar, substitute one chosen for the address bar. But I would like to use both.
  I guess this problem may be caused by the new update, but maybe something can be done about it?

  Hello, Yes, consolidating the search options in the search bar, address bar and the default homepage was a change deliberated by the developers. You can use the keyword search by mike kaply extension work around this if...

• How to choose a new search for the search bar engine which has not been yet registered?

  I want to search the English-Greek dictionary Woodhouse search bar, that I can't find. How can I get a?

  First of all, download this add-on: https://addons.mozilla.org/en-US/firefox/addon/add-to-search-bar/

  After Firefox restarts, go to http://www.lib.uchicago.edu/efts/Woodhouse/

  Place the cursor in the field where you can type in a query and then right click and choose "add to search bar." You should now be able to see in your list of search engines.

  An another add-on is to have is this one: https://addons.mozilla.org/en-US/firefox/addon/context-search/ it helps to highlight a word or phrase in a web page and then right-click and choose to search for any search engine you have installed including the English-Greek dictionary, you add. See screenshot for an example.