Section of code too large!

Similar Questions

• IO error: output file: application.cod too large data section

  Hello, when I compile my application using BlackBerry JDE, I get the following error:

  I/o Error: output file: application.cod too large data section

  I get the error when you use the JDE v4.2.1 or JDE v4.3. It works very well for v4.6 or higher.

  I have another forum post about it here.

  I also read the following article here.

  On this basis I tried to divide all of my application, but that doesn't seem to work. The best case that it compiles for awhile and the problem is that I add more lines of code.

  I was wondering if someone could solve the problem otherwise. Or if someone knows the real reason behind this question?

  Any help will be appreciated.

  Thank you!

  I finally managed to solve this problem, here is the solution:

  This problem occurs when the compiler CAP is not able to give an account of one of the data resources. The CAP compiler tries to package the data sections to a size of 61440 bytesdefauly max. "You can use the option of CAP'-datafull = N' where N is the maximum size of the data section and set the size to be something less than the default value. With a few essays on the size, you'll be able to work around the problem.

  If someone else if this problem you can use the same trick to solve!

• Use an array of Boolean to jump to sections of code (extensible design).

  I currently have four pieces of code (which could turn into 5, 6 or more pieces in the coming months), I want to run or jump selectively according to an array of Boolean.  I have a cluster typedef of numbers, which are each refers to a port VISA number connected to a particular instrument.  This will be expanded in the future as the software is necessary to control the instruments more.  There is an array of Boolean (coming from the vi) attached which has a value of TRUE for each instrument that was detected (and therefore is connected).  In the case below, I want to initialize each instrument that is connected, but not try to do something for those who are not.

  The cluster and the Boolean chart is shown below:

  

  As someone who will need to expand in the future on this section of code, I want to write it in a way that will be infinitely extensible, without taking more space BD.  At the moment I find myself unable to do since I do not know how to pair the table of Boolean with the elements of the bunch, such that I can run or ignore the code accordingly.

  Help, please!

  -James

  Since you mention that you want to expand, I'd be more inclined to set a dashboard containing the port number, the type of instrument and the status of the instrument. When you search for your instruments you want to iterate over the array. You can use an ini file to determine which instruments must be present in the system. Others may be optional, and their associated actions could be ignored if necessary. However, the main point I'm trying to do is to combine your status with your instrument information table. This way, you eliminate the possibility of a mistake trying to keep and table and a synchronized cluster. A table makes it also much easier add or remove instruments from your system.

  A few other notes, if you check in a stop condition then stop. Don't simply continue the execution of each iteration of the loop with a business structure that will jump execution if the stop consifition is encountered. Simply stop. Imagine if you had 1000 items in your instrument cluster/table. Using your method always run you your loop 1000 times, even if the shutdown occurred during the first iteration. Eliminate duplication of code and logic twisted to combat it. You have two places incentive th euser, if they want to start or stop. You must have a place to make this code. Much easier to understand and maintain. Don't expand your code easily either because the hard-coded error strings. Your case statement will become very large if you generate your static error strings. Use a loop and a format common you build your missing channel of the instrument. If you use the table on the groups of instruments, I suggested that you will be able to format the string using the type of instrument. I'd be much more inclined to use a single notification utility that will be supported as well cancel and stop messages. It changes a lot better when you have additional message types rather than use a notification for each type of message.

• Office extended; display does not display, image too large, not centered

  Hi, I know that it is apparently a matter of stupidity, stupid with a solution obvious but wait - I'm not a

  full retard. I already did all the utilities to change screen resolution and checked the settings

  for the "Display".  I've updated all the drivers, checked the compatibility, etc. Basically, I have tried everything I can think

  and yet my desktop image lying on my 37 '' Sceptre flat screen TV is not placed correctly / size right.  I can't

  See the entire desktop (as appearson the screen of my laptop).  The whole picture is fire too far to the right (in front of the tv),

  leaving an area 3' black on the side left which is unaccessable to my cursor.  Size of the window when on the internet is too large for

  access the menu items. The window is stretched too long in width and too short in length; content is not distorted.  One

  monitor only - once identified, the 1 appears on both screens. 1 is the primary monitor. Its driving me crazy - it's

  something I should have been able to take care of myself, but I give up. Any help would be appreciated a lot.

  Hi Ankhisis,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Check the status of the display driver in Device Manager:

  a. click on Start

  b. in the run box, type in devmgmt.msc

  (c) in the Device Manager window

  d. expand graphic cards

  e. check if an error code is listed.

  Follow the methods below:

  Method 1: You can see the below mentioned article Microsoft Knowledge Base and check if the problem persists.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Method 2: You can also try to change the manual steps of resolution screen and check the results.

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Let us know if it helps.

• How can I reduce the size of an e-mail signature because I am told that it is too large, truncated?

  How can I reduce the size of an e-mail signature because I am told that it is too large, truncated?

  original title: email signatures

  How did you compose the signature?  If you have used the word or some office products, its probably loaded with unnecessary code.  In Word save as html, but use the filtered HTML and which should reduce the size.

  All you really need is the basic HTML code such as:

  
  
  This is a signature.

  Here's a picture:
  

  
  

  You can copy and paste that into Notepad and add some text, formatting, and images you want.

  Steve

• (163) the queue is too large; event (s) key/pen fell

  Hello

  I have a separate application for unemployment insurance and the library cod.  His Wedge driver for barcode scanner.  The cod of the library where the treatment and injection takes place.

  When scanning for 1 d bar codes and the characters (up to 36) say the pilot works fine. But when scanning barcodes 2D with more than 36 characters I get this error:

  guid:0x97C9F5F641D25E5F time: Wed Dec 16 15:37:50 2009  severity:0 type:2 app:System data:Process WedgeDriver(163) queue too large; key/stylus event(s) dropped
  

  Show log when this error occurs:

  guid:0x97C9F5F641D25E5F time: Wed Dec 16 15:37:50 2009  severity:0 type:2 app:System data:CMM: WedgeSDK(4805) no sig from 0x33
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x00[
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x00)
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x00>
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x00\x1E
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x000
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x001
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x00\x1D
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x000
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x002
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x009
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x002
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x006
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x001
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x004
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x00\x1D
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x008
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x004
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x000
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x00\x1D
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x005
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x001
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x00\x1D
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x009
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x008
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x005
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x008
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x002
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x009
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x000
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x002
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x007
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x002
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x009
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x005
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x000
  guid:0xAFFFF32C2FFFFCFF time: Wed Dec 16 15:37:50 2009  severity:0 type:0 app: data:?4:\x00\x00\x002
  guid:0x97C9F5F641D25E5F time: Wed Dec 16 15:37:50 2009  severity:0 type:2 app:System data:Process WedgeDriver(163) queue too large; key/stylus event(s) dropped
  

  Here is my code:

  for (int i = 0; i < sBarcode.length();)                   {
      nByte = sBarcode.charAt(i);
      EventInjector.invokeEvent(new EventInjector.KeyCodeEvent(EventInjector.KeyCodeEvent.KEY_DOWN, (char)nByte , nKeypadListener, nDownTime ));
  
      EventLogger.logEvent(GUID, nByte);
      i++;
  }
  

  I get (163) queue too much, but did not find anything.

  Can someone help me on this?

  Thank you...

  I think you should go back to the developer support driver.

  There should be a way to strangle the entry if it came too quickly.

• Data truncation error ORA-12899 ODI File_To_RT: value too large for colum

  Hello
  Give me an idea so I can truncate the grater data source to length max before you insert into the target table.
  
  Prtoblem details: -.
  
  For my script read the data of the insert and the source .txt file the data in the length of the target table.suppose source file data exceeds the length of col max of the target table. So how I truncates the data so that the data migration will be successful and also can avoid the mistake of ODI "" ORA-12899: value too large for column '. "
  
  Thank you
  Sébastien

  I was referring to the source database. Because C$ table is created based pon the source data store. Increase the physical and logical length on a same value.
  If you see the code generated for C$ table create table step you can see the size of the column. This table is not able to store the incoming string value.

  Substr function will be used when the data will be loaded either I$ table or table target.

• How you & quot; Fold & quot; a Section of Code?

  I'm trying to find how to fold or reduce a section of code in Flex 3. I have active folding, but I can't seem to do.
  
  Thank you.

  Too bad... I got it.

  Thank you.

• The request contains a URL that is too large

  When you click on a link, a new tab opens with this message. "The request contains a URL that is too large.

  Help!

  Well, I have accidentally solved the problem. Trying to open links incriminated, things seem to work. Thanks for your replies. If problem surfaces again once, I'll be back. Happy new year!

• 413 request Entity too large (history)

  I started having a sync error that won't go away. When I watched the news I've seen a lot of mistakes in the post. So the first thing I tried was to blow everything since I've been using the synchronization of the former. Then configure the new sync but I still had an error. Only this time, it was only a post failure and history was precisely the problem:

  1412870549016 Sync.Collection DEBUGGING POST length: 2152216
  1412870551015 Sync.Collection DEBUG mesg: POST fail 413 https://sync-141-us-west-2.sync.services.mozilla.com/1.5/10221627/storage/history
  MESSAGE from DEBUG Sync.Collection 1412870551015 413 https://sync-141-us-west-2.sync.services.mozilla.com/1.5/10221627/storage/history fail
  1412870551015 Sync.Engine.History DEBUG records Uploading failed:
  413 request entity too large

  If I disable the history then everything is fine and it syncs very well. But of course, now I can't synchronize my story. Any ideas on how to solve this problem? Am I stuck having to blow my story?

  Anyway... went ahead and blew the history cache. I guess it'll just keep going because the story gets too big and there is no real solution for this.

• The image file is too large

  Hi, I am trying to download a book on Smashwords. I made the pictures so small now that I CASN barely see them (2.5 cm). Yet, this short story 1 200 words and 39 works of graphic art is still too large to download in format Doc (the one acceptable to swords)

  I don't want to download a mac epub as it blows the content too. It never works with Smashwords requirements. (I made hundreds of changes and moving images in all directions no matter what)

  I tried to compress the file and there is Mo.9 difference - not enouch.

  I'm at 17.6 MB now, and I'm afraid this file will not work.

  Is there anything I can do to make a smaller file with works of art (for small children) working here? Thanks guys and girls. Much appreciated if you go by.

  To create this in what applications do you use?

  Some applications (including MS Word, Pages, but also others) store several revisions and changes in the main document. Sometimes it's helpful (makes it easy to retrace your steps), but it leads to the bloat of the document.

  There are two ways to reduce this. In Word, try to save as... to save a clean copy of the document (without any changes). In the Pages, use file-> advanced-> reduce the size of the file to do the same. Other applications may have similar options.

• All the text displays too large, Ctrl + 0 does not

  Enabled Firefox this afternoon to find all the text made too big by about 30%. Icons in the bookmarks bar and the tabs are too big, as well. If I press on Ctrl + - twice, then it seems normal, but Ctrl + 0 returned any abnormally high. Gmail in particular seems wrong no matter what I put the zoom, as if the user interface is too large, but the text is too small.

  I don't know what is happening. Several reboots of Firefox has not helped. Disabling each addon and plugin did not help.

  Can you use Ctrl ++ (zoom full page) to increase the size on Gmail? I'm sure that at least a few sites you will need to do this, depending on the size of pixel of your screen.

• When the scaling in the layout, 1st page prints correctly, but the following pages were not properly/too large for the paper, parts of text missing scale

  When you try to print in Firefox and when the scale to the size of the page in the page layout, the first page prints correctly, but the following pages do not scale correctly and are too large for the paper, with the parts of the text are cut off at top and right. It is not fixed by checking or unchecking the scaling / shrink to fit page width "ignore" in the print window, or by changing the scale percent.

  I am running Firefox 15.0.1, on Mac OS 10.5.8.

  The same problem happens in preview print and if I save the copy in a .pdf file

  I tried all the fixes in the how to and others in various forums with no improvement.

  This happens everytime I try to print a document from scaling upwards or downwards in Firefox.

  I note the bug has been fixed and should in Firefox 21 right now, it will mean the use night http://nightly.mozilla.org/

• Options to change the display screen size are too large or too small.

  How can I change the display size to one I am comfortable with that? The options are too large or too small.

  Press the option key while you click chipped. Those are the only options available.

• in hotmail, get "message too large" error - windows says it's a matter of firefox

  Received in hotmail messages arrive with "message too large" to adapt to the screen. Hotmail is absolutely useless to solve this and says it's a Firefox issue. I get the runaround of Adobe, BTW - I have to run Windows Explorer to get good downloads - are - they it on purpose to make it more difficult to use Firefox? What can I do?

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".