Secure Gateway has refused the connection

Similar Questions

• Listener refused the connection with the following error

  Hi all,
  
  I faced this problem. So after searching the forum I found the most important command for this questions as follows but until now I have not found the solution to this problem
  
  

  Error: Listener refused the connection with the following error:
  ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
   

  I have run the following commands

  lsnrctl start
  lsnrctl service
  lsnrctl status

  results as follows
  

  C:\Windows\system32>lsnrctl start
  
  LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JAN-2013 00:28
  :01
  
  Copyright (c) 1991, 2010, Oracle.  All rights reserved.
  
  TNS-01106: Listener using listener name LISTENER has already been started

  C:\Windows\system32>lsnrctl service
  
  LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JAN-2013 00:28
  :06
  
  Copyright (c) 1991, 2010, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
  Services Summary...
  Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0
           LOCAL SERVER
  The command completed successfully

  C:\Windows\system32>lsnrctl status
  
  LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JAN-2013 00:28
  :08
  
  Copyright (c) 1991, 2010, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
  ction
  Start Date                07-JAN-2013 00:24:39
  Uptime                    0 days 0 hr. 3 min. 28 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   d:\app\DELL2\product\11.2.0\dbhome_1\network\admin\lis
  tener.ora
  Listener Log File         d:\app\dell2\diag\tnslsnr\DELL2-PC\listener\alert\log.
  xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
  Services Summary...
  Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
  The command completed successfully
  
  C:\Windows\system32>

  This is the 
  
  listener.ora  file 
  
  
  # listener.ora Network Configuration File: d:\app\DELL2\product\11.2.0\dbhome_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (SID_NAME = CLRExtProc)
        (ORACLE_HOME = d:\app\DELL2\product\11.2.0\dbhome_1)
        (PROGRAM = extproc)
        (ENVS = "EXTPROC_DLLS=ONLY:d:\app\DELL2\product\11.2.0\dbhome_1\bin\oraclr11.dll")
      )
    )
  
  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
        (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
      )
    )
  
  ADR_BASE_LISTENER = d:\app\DELL2

  It's tnsnames.ora
  
  

  # tnsnames.ora Network Configuration File: d:\app\DELL2\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      )
      (CONNECT_DATA =
        (SID = CLRExtProc)
        (PRESENTATION = RO)
      )
    )
  
  ORCL =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = orcl)
      )
    )

  Please try with it:

  ALTER system set local_listener ='(ADRESSE = (PROTOCOL=TCP) (HOST = hostname)(PORT=1521))';

  I recommend you to change the value "localhost" to the hostname of the server.
  Also try to ping the server name, example: ping serveroracle.com

  Once the execute the alter system command, try again, please I hope your comments.

  Published by: Francisco Riccio on 2013-ene-06 09:10

• Listener refused the connection with the following error: 12505

  Hello experts,
  
  I am facing the problem for the last two days, when I'm trying to connect to the oracle with sql developer and Jdeveloper database. Previously, it was running fing.
  
  The description of the detal problem is
  
  To perform the requested operation, an error has occurred:
  
  Listener refused the connection with the following error:
  ORA-12505, TNS:listener is not currently of SID given in connect descriptor
  
  
  Code provider 12505
  
  I tested the following text, and every thing seems fine
  ==============================================================
  
  E:\Users\Anutosh > lsnrctl services
  
  LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 20:25:34
  
  Copyright (c) 1991, 2010, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  Summary of services...
  Service 'CLRExtProc' has 1 instance (s).
  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  The command completed successfully
  
  E:\Users\Anutosh > lsnrctl status
  
  LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 20:26:13
  
  Copyright (c) 1991, 2010, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
  Start date August 25, 2012 19:04:12
  Uptime 0 days 1 hour 22 min 1 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  D:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\listener.ora Listener parameter file
  D:\app\anutosh\diag\tnslsnr\MTECH\listener\alert\log.XML log listener
  Summary of endpoints listening...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 1521)))
  Summary of services...
  Service 'CLRExtProc' has 1 instance (s).
  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
  The command completed successfully
  
  E:\Users\Anutosh > tnsping orcl
  
  AMT Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 21:35:44
  
  Copyright (c) 1997, 2010, Oracle. All rights reserved.
  
  Use settings files:
  d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521)) (CONNECT_DATA = (SERVER =
  
  DED
  (ED) (SERVICE_NAME = orcl)))
  OK (20 ms)
  
  Content of tnsnames.ora
  ---------------------------------------
  
  tnsnames.ora # Network Configuration file: d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )
  
  Listener.ora
  -------------------
  
  listener.ora # Network Configuration file: d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = d:\app\Anutosh\product\11.2.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:d:\app\Anutosh\product\11.2.0\dbhome_1\bin\oraclr11.dll")
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = d:\app\Anutosh
  
  Init.ora
  ------------
  
  # Change '< ORACLE_BASE >' to point to the oracle base (that you specify to)
  (# install times)
  
  db_name = "ORCL".
  memory_target = 1 G
  process = 150
  audit_file_dest =' < ORACLE_BASE > / admin/orcl/adump '
  AUDIT_TRAIL = 'db '.
  DB_BLOCK_SIZE = 8192
  db_domain = "
  db_recovery_file_dest =' < ORACLE_BASE > / flash_recovery_area'
  db_recovery_file_dest_size = 2G
  diagnostic_dest = "< ORACLE_BASE >.
  Dispatchers ='(Protocol=TCP) (SERVICE = ORCLXDB)"
  open_cursors = 300
  Remote_login_passwordfile = 'EXCLUSIVE '.
  undo_tablespace = 'UNDOTBS1.
  # You can ensure that the control files are created on the separate physical
  features of #.
  control_files = (ora_control1, ora_control2)
  ' compatible ' 11.2.0 = ".

  Rajat says:
  How can I fix the ITI.
  Could you please suggest anything.

  no listener.ora file is necessary for the LISTENER to operate.
  move, rename, delete, or remove the listener.ora file & then reboot the system.

  each Oracle DB tries once every 60 seconds to register with EARPHONE as shown below

  tail -10 /u01/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/bcm-laptop/listener/alert/log.xml
   host_addr='127.0.0.1'>
   25-AUG-2012 12:58:48 * service_update * v112 * 0
   
  
  
   25-AUG-2012 12:59:18 * service_update * v112 * 0
   
  
  

• BlackBerry BB Q10 - Q10 refuses the connection with some email Exchange ActiveSync accounts

  Hello @ all,

  I'm quite new in the universe BB and have a serious problem with a Q10:

  We miss MS - Exchange Server 2010 and a "new" BB - Q10.

  It is not possible to configure ActiveSync with our Chief Executive Officer Exchange account. Other accounts)<700MB email)="" can="" be="" configured="" in="" no="" time="" and="" work="">

  The BB refuses the connection to account our CEO Exchange with the error message:

  "There was an unexpected problem. Maybe some functions do not work properly.

  (translated from the German original "Es ist ein unerwartetes problem aufgetreten.) Einen function some Funktionen nicht duly".)

  Well, this is sort of an understatement, actually ActiveSync does not work a little.

  Does anyone have an idea how to solve this problem without Exchange-box backup mailbox of the Chief Executive Officer, empty it, plug in the BB and restoring the mailbox again?

  Any hint is appreciated.

  Thanks in advance!

  Concerning

  Gnampf

  Unfortunately the suggestion of KnottyRope has not helped.

  Something with the AD-account seems to be wrong.

  I solved the problem of

  • adding a new account similar to what does not work in ExchangeServer via the ManagementConsole
  • adding this new account in Outlook, the Chief Executive Officer
  • copy all contacts, emails a calendar to this new account entries
  • removal of the old Exchange mailbox (and ONLY the mailbox) of the ExchangeServer without touching the user AD
  • the configuration of the correct e-mail address for "send to" and "answer to" in the ExchangeManagementConsole, so that an e-mail, sent by "answer to", to find the right box the letters

  As a result, our CEO can use his well known-name of user and password for Windows, but sees a slightly different name account in Outlook.

  But it's something that it can withstand, until the synchronization with the BB works. And, so far at the moment, it seems to work.

  This workaround is perhaps useful to others.

  Concerning

  Gnampf

• Listener refused the connection with the following error: ORA-12505

  Hello
  

  Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: 127.0.0.1:1521:XE 

  Windows XP + Oracle 10.1.0.20
  
  I checked my *.ora files and found the host 127.0.0.1 but I noticed by running the netstat command on prompt back most of my ports is captured by www.360.cn including 1521
  
  When I try to stop the following message is displayed:

  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exists

  Thank you and best regards

  Hello

  [oracle@myoramachine ~]$ oerr ora 12505
  12505, 00000, "TNS:listener does not currently know of SID given in connect descriptor"
  // *Cause:  The listener received a request to establish a connection to a
  // database or other service. The connect descriptor received by the listener
  // specified a SID for an instance (usually a database instance) that either
  // has not yet dynamically registered with the listener or has not been
  // statically configured for the listener. This may be a temporary condition
  // such as after the listener has started, but before the database instance
  // has registered with the listener.
  // *Action:
  //  - Wait a moment and try to connect a second time.
  //  - Check which instances are currently known by the listener by executing:
  //    lsnrctl services 
  //  - Check that the SID parameter in the connect descriptor specifies
  //    an instance known by the listener.
  //  - Check for an event in the listener.log file.
  [oracle@myoramachine ~]$
  

  1. check the lsnrctl services

  2 check the tnsping output:

  tnsping MYORACLE

  3. check the connectivity to the computer hosting your Oracle server to the port (I guess 1521):

  Telnet 1521

  4. in case you are not able to connect to the Oracle Server - I investigate it in several directions:

  -problem of network infrastructure

  -some process disturbing / virus on the server Oracle itself

  -firewall problem

  Good luck!

  ---------------------------------
  http://DBA-star.blogspot.com/

• Since the installation of the latest version of 4.0b12, I am unable to connect to any https through a proxy site. Connection works if no proxy is involved, with the proxy, I get a message like "proxy refuses the connection". Thank you for your answer

  I am connected to the network of the client and I should use a proxy.
  I successfully authenticate to the proxy and I try to access https://mail.google.com.
  I get a message that the proxy refuses the connection.
  I noticed that this happens with all https sites.
  If I connect with my mobile internet stick without proxy, I am able to connect: the combination of proxy and https is a failure.
  Other computers on the same network with different browsers can connect to https via the proxy.

  I work with the development of Firefox on this team. As far as I know, they seem to think that there are 2 or 3 different with the same symptoms or very similar problems, all involving proxies. They think that they have set their all for RC1.

  Right now, it seems that we just want to test an early version.

  You can get that here:

  http://ftp.mozilla.org/pub/mozilla.or.../Firefox-4.0b13pre.en-US.Win32.installer.exe

  Install this somewhere (not in your current installation directory), quit all instances of Firefox and try it. I would like to know if it works.

• now, I have no audio device, tried to download the realtek drivers but failed: class installer has refused the request to install or update the device?

  Original title: the class installer has refused the request to install or update the device?

  now I don't have a device audio, reinstalled windows xp with recovery disk, tried to download the realtek drivers but failed.

  Hello

  1. What is the status of the sound card in Device Manager?

  The following article might be useful: no sound in Windows

• Can't download email, get "server has ended the connection.

  Original title: impossible to download email

  When I try to download my e-mail messages in Windows Mail, I get the message that the server has terminated the connection.  Trying to get 70 messages and it always locks upward when you message 5. Just cannot go beyond this one.  Any ideas as to why?

  KCG

  The 5th message may simply great download before the server times out.  You can use a web browser to log in to your email and delete it.

• My Lightroom has lost the connection to most of my photos, records and collections. They are still on the computer. It happened, while moving my laptop when it was running. The mouse is moved and it might have changed the configuration. How can I do my wo

  My Lightroom has lost the connection to most of my photos, records and collections. They are still on the computer. It happened, while moving my laptop when it was running. The mouse is moved and it might have changed the configuration. How can I make my Lightroom works properly again?

  I use Lightroom 6.4 on a Pc with Windows 10.

  Has disappeared? Try file-> open the new item, and then select each illustrated catalog until you find the catalog with your photos.

  If this does not work, please post a screenshot of the problem.

• Listener to refuse the connection with the following error ORA-12505

  Hi everyone, Am really new to the oracle database, I work on my school project work and am stuck in the middle of this error (listener refused the connection with the following error ORA-12505).
  
  I started the time serveral listener and it is said that 'no service supported by the LISTENER', I can't access the database via sqldeveloper including trows on the same error (listener refused the connection with the following error ORA-12505, TNS:Listener currently know of SID given in connect descriptor.) In addition, my em show red arrow down to the listener. Here are my coordinates hard & software.
  
  
  Oracle 11.1.0
  OS: Red Hat Enterprise Linux 4 (running the operating system through Vmware workstation)
  TNSNAME. ORA
  
  LISTENER2 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  ((ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
  )
  )
  
  AUDITEUR1 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  
  
  
  Listner, ora
  
  
  
  
  LISTNER_ORCL
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  )
  
  IMT_ADMI =
  (= DESRIPTION
  (PORT = 1522))
  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = imt_admin
  )
  )
  
  LISTENER_IMTADMIN =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
  
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  
  I read on some forums that I need to edit somethings that am not sure cos I don't want to mess with the database, I need help on what to.
  Thanks for the help in advance.

  (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))

  Try to edit listener.ora by:
  (ADDRESS = (PROTOCOL = TCP) (HOST = HOST_NAME_OF_YOUR_DATABASE_MACHINE/OR TRY USING THE IP ADDRESS OF THE DATABASE SERVER MACHINE)(PORT=1521))
  Just try to edit HOST = value line above. You must use HOST_NAME_OF_YOUR_DATABASE_MACHINE or IP OF the DATABASE SERVER MACHINE.

  Host name can be obtained by the hostname command on the database server.

  With localhost, no one can connect to the database remotely.

  Concerning
  Girish Sharma

  Published by: Girish Sharma January 11, 2013 18:26

  then after the output of commands below:
  lsnrctl stop
  lsnrctl start
  Wait 60 seconds...
  ORACLE_SID =
  sqlplus scott/tiger@tnsname

  Show us what is happening now.

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• Printer large Format HP 7500 has: OfficeJet 7500 has quit the connection during the scan in VueScan &amp; Mac OSX 10.10.1

  The scanner interrupts the connection of WIFI halfway the scan. I can scan sometimes two or three pages, and then the next page will scan only partial and the connection is abandoned - typically freezes application (VueScan), while the scanner window indicates that the analysis is ongoing. If I wait until the scanner end I get only part of the page, with the background that half left in white.  That is what it is? Is the problem with VueScan, Mac OSX 10.10.1, OfficeJet 7500 or my WIFI network?

  Thank you!

  My system: Mac OSX 10.10.1

  VueScan 9 x 32 (9.4.59)

  iMac 2.8 GHz Intel Core Duo (24 "beginning 2008)

  6 GB Memmory 800 MHz, DDR2 SDRAM

  HP 7500 has large Format Printer/Scanner (model E910a)

  WIFI modem: Cisco 3825 DPC

  (Shaw CableVision/WIFI modem)

  Hello

  What happens when you scan from the HP or Capture of Image scanning software, you see similar problems?

  In the affirmative, please let me know because it wil require to solve any problem of connectivity to the printer.

  If everything works with software such as HP can happen due to any problem with VueScan, such I would say contacting VueScan at torubleshoot because they are more familiar with their product.

  Please let me know the results,

  Shlomi

• I haven't bought a Skype online no wih my live id (microsoft) as login but now microsoft has removed the connection with the account option microsft in henriq version of Skype does - what I do

  my microsoft with skpye account login id is * address email is removed from the privacy *. but do not know what inovativeness has crossed the mind of MS developers they have out to connect you with the account of microsft (also (not imp for me however: facebook)) now I have a online number, which I use to talk to my clients based in the United States. Now, I'm not able to connect to Skype it IE. I am unable to talk to my clients. After Googling and binging the world, I discovered het it is is no not for Skype customer support... I need a solution. or is it stupid to go to microsoft services. I need an answer.

  I lost the confidence of my clients... ask more I need the service return to work. does any body listen... here... wake up please! you're old Skype was better for me

  What do you mean by ' microsoft has removed to connect you with the account of microsft.

  are you able to connect to the MS account?

  Try to use a different ID and check

  Skype using these links, you can contact

  https://support.Skype.com/en/

  https://support.Skype.com/en/FAQ/FA1170/how-can-i-contact-Skype-customer-service

• Thunderbird has stopped the connections to the servers.

  I'm having a strange problem with Thunderbird. Since yesterday, I can not connect to servers or receive, send or save drafts. What is happening to all three accounts, IMAP (Gmail two, a 3 rd part), both from home or at work. Email accounts work on other devices. There must be something to this PC and Thunderbird installation. It does work in Windows Safe Mode & Thunderbird Mode without failure either. It did not help uninstalling and reinstalling. I'm using version 45.5.0 on Win7. I see the following: the status bar again : connecting to ... Receive messages does not expire, it will stay in the connection... condition. Save a project said: there was an error saving message in drafts. Try again? Said after start-up error console: could not read the chrome manifest ' queue: / / / C:/Program % program % 20Thunderbird 20(x86) /Mozilla % 20Files / chrome.manifest'.

  While the creation of the category 'Profile after change' services, could not create service entry "Sapi speech Synth", contract ID "@mozilla.org/synthsapi; 1.

  Discover the folders for the account failed with exception: [Exception... "Component returned error code: 0 x 80550016 [nsIMsgFolder.subFolders]" nsresult: "0 x 80550016 ()" location: "JS frame: resource:///modules/MailUtils.js: MailUtils_discoverFolders: line 36" [data: no] "

  Timestamp: 29/11/2016-19:40:29 Error: NS_ERROR_FAILURE: component returned error code: 0x80004005 (NS_ERROR_FAILURE) [nsIMsgFolder.isServer] Source file: resource:///modules/FeedUtils.jsm line: 230

  Proxy... It's the proxy settings.

• SRW2024 refuses the connection web admin

  I have several SRW2024 switches and use the web administration interface of the to administer. One of the switches recently started to refuse any kind of admin connection.

  I have reset the system using the "reset" on the front panel pin hole. I can now bring up the admin login by using the 192.168.1.254 address, but no matter what I enter, he says that I entered a username/password invalid name. I tried the default settings in the user manual, the password that I set when I put in place originally and just about every combination I can think, but nothing works.

  Does anyone have suggestions for how I can get in?

  Hi Bobdy, I'm confused. The SRW2024 doesn't have a reset pin hole. If the model you are referencing must be something different.

  In any case, if you si vous pouvez pouvez also console the switch then the device, ESC, tap on your keyboard and it will take you to a backdoor command prompt where you can bypass the password. After that it allows to bypass the password, you can set a new username/password on the command interface.