Security location does not get updated in FDMEE

Similar Questions

• Google chrome does not get updates

  my google chrome is not updating.after some time it says error3 and I don't know how to solve this problem, as EMI does not get the updates ive tried going by default on my settings for no result .hope could someone help me with this.

  Thank you stephanie, but in the meantime idid a system restore to see if I could fix it but now im, e get updates are disabled by the administrater ime so no further forward.

• Index of book does not get updates

  Hi all

  I have a book of FM 10 close to 200 pages and 7 chapters. It has a nice (markers).

  Today, I discovered that the index is not get updated when I update the book. New entries do not come.

  "Generate Table of contents, lists, and indexes" is selected by updating. And it was working fine before, this problem came a lot recently. I noticed today.

  When I try to generate a new index, the generated file is empty. Although the index entries in the book are very good, FM does not detect them.

  I'd appreciate quick help much in this case.

  Kind regards

  Com

  > I imported these (all formats including the masterpages and ref pages)

  > of the old index file, and now it's all the same to the research.

  It is Plan B and is a more reliable route, but is more work that's Plan.

  > ... I'm not being able to ressuract the old index as you said...

  That's happened?

• Form AD and AD does not get updates

  Hello
  
  I have updated to a user of the IOM in Admin Console for a particular domain. The field is getting updated in the definition of user IOM.
  However, this field is not getting updated.
  
  I'm trying to understand how an update to your user IOM - updates to the AD form.
  I think that there are two tasks in the definition of user AD process.
  one is "Update field", and the other is 'field of change '.
  
  Where this field named made frm? How does the form AD knows that there is an update.
  
  In OID, we have a Lookup.USR_PROCESS_TRIGGERS search. Is there something similar for AD?
  
  All ideas are welcome. I will award points. THX.
  
  Concerning
  Vijay Colin

  I'm trying to understand how an update to your user IOM - updates to the AD form.
  I think that there are two tasks in the definition of user AD process.
  one is "Update field", and the other is 'field of change '.

  Where this field named made frm? How does the form AD knows that there is an update.

  In OID, we have a Lookup.USR_PROCESS_TRIGGERS search. Is there something similar for AD?

  You must add the task of Change FieldName tends in AD Process Definition to Lookup.USR_PROCESS_TRIGGERS. Now if the update coming IOM triggers this task that copies the updated value of the UserForm to the AD form. Once the value is copied to a field in the form of process AD field updated task name is called which will update the same target.

  Lookup.USR_PROCESS_TRIGGERS triggers all specified tasks when update happens on a particular area on the user profile and it is common for all targets.

• iterator does not get updates

  Hi all...

  I use Jdev 11.1.1.6

  When I enter the page (popup in my case) iterator is populated by a selection drop-down list (before entering the page)

  for the first time that iterator is filled correctly

  < trh:tableLayout id = 'tl1' width = '100% ' borderWidth = "1" cellPadding = "5" >

  < af:iterator value = "#{pageFlowScope.Bean.list}" var = 'temp' "

  ID = "dc_i2" >

  < trh:rowLayout >

  < trh:cellFormat >

  < af:outputText value = "#{temp.var1} 'escape = 'false'"

  ID = "dc_ot10" / >

  < / trh:cellFormat >

  < / trh:rowLayout >

  < / af:iterator >

  < / trh:tableLayout >

  Run the backingBean to see the list

  {} public void populateInterator (ActionEvent event)

  .......

  setList (XXX.getList ());

  System.out.println ("list =" + list);

  }

  When I change the value af:inputText below, I run a search in backing bean

  < af:panelGroupLayout >

  <af:inputText binding = "#{pageFlowScope.Bean.Text}" clientComponent = "true" autoSubmit = "true" valueChangeListener="#{pageFlowScope.Bean.updateIterator}"/ > "

  < / af:panelGroupLayout >

  Work at the backingBean

  {} public void updateIterator (ValueChangeEvent valueChangeEvent)

  .......

  setList (XXX.getList ());

  System.out.println ("list =" + list);

  }

  When I print the values on console (jdev), I and desired list, but this list is not getting updated on the front end.

  < trh:tableLayout id = 'tl1' width = '100% ' borderWidth = "1" cellPadding = "5" >

  < af:iterator value = "#{pageFlowScope.Bean.list}" var = 'temp' "

  ID = "dc_i2" >

  < trh:rowLayout >

  < trh:cellFormat >

  < af:outputText value = "#{temp.var1} 'escape = 'false'"

  ID = "dc_ot10" / >

  < / trh:cellFormat >

  < / trh:rowLayout >

  < / af:iterator >

  < / trh:tableLayout >

  Clues or advice where fishing can be?

  After you set the list, give a PPR on the list.

  AdfFacesContext.getCurrentInstance () .addPartialTarget (yourListComponent ());

• Secure location does not work

  If set up my house as a safe place, so I wouldn't unlock with code when I'm at home, but it does not work. How can I make it work? It is implemented at the right address, are there other settings that I should look for?

  @Kim3 @GAZ082 @mr_xzibit  

  Just tested it with a Z3 running Lollipop and it works fine, when I unlock the screen, the schema lock is gone and I get a message:

  Your device is unlocked, then at home, that you set as a place of trust.

  To force your device to lock, turn the screen off, then turn it on and press the lock icon

• Materialized view does not get updated!

  Hi all
  
  I had created this point of view, materialized on 1 may, he performed very well and I checked it on May 2, that she had updated. Today when I checked the last refresh date is always on view may 2, which means not materialized view get updated this morning at 9.
  

  create materialized view EMPLOYEES_IN_EDWDB6
  refresh fast start with (sysdate) next to_date(sysdate+1) + 9/24 as
  select 
  employee_id,first_name,last_name,email,phone_number,hire_date,job_id,salar
  y,commission_pct,manager_id,department_id 
  from 
  hr.employees@link_dwdb_hr

  MVIEW_NAME                     LAST_REFR
  ------------------------------ ---------
  EMPLOYEES_IN_EDWDB6            02-MAY-10

  Will be the code below do freshen up everymorning at 9?

  refresh fast start with (sysdate) next to_date(sysdate+1) + 9/24

  Also how do I check the properties of a view of materiazed, i, e if I want to know at what time the materialized view Refresh.
  
  Thanks in advance,
  
  Kind regards

  Hello

  to check in real time when MV to be updated you can use
  Select *.
  of USER_JOBS

  or DBA_JOBS with schema_user = SCHEMA YOUR condition

  and check the work where WHAT = dbms_refresh.refresh (' 'YOUR PLAN'.) ("' YOUR MV" ')
  in the fields last_date, next_date, you will see the date and time of the last and next refreshes.

  CHESS! = 0, it means there is problem with update, see alerts to identify a problem.

  I checked on Oracle 10.2.0.4.

  Concerning
  Andrey

  Edited by: user4440873 may 6, 2010 13:43

• Table (ADF 11 g) does not get updated on the selection of lines...

  Hi all
  
  I have a table element (ADF 11 g) in my page with the selection of multiple lines. I have my own row selection listener. Whenever I have select several lines with the CTRL key, the table is getting updated. It is fetching the data again for each selection. I don't want the table to get updated whenever I select a line. In the im listener manually selected do the line current. The code below is the table row selection listener.
  
  public void tableRowSelectionListener (SelectionEvent selectionEvent)
  {
  Add the code in the event here...
  String tableRowSelectionListener = "tableRowSelectionListener";
  Table richeTableau = (RichTable) selectionEvent.getComponent ();
  Set of keys to RowKeySet = table.getSelectedRowKeys ();
  Txn_id = number ((Number) ((Key) ((List) keySet.toArray () [0]) .get (0)) .getAttribute (0));
  int noRowsSelected = ((List) keySet.toArray () [0]) .toArray () .length;
  Rank [txnrows] = null;
  if(noRowsSelected == 1)
  {
  PscTransactionsViewImpl txnVO = (PscTransactionsViewImpl) amImpl.getPscTransactionsView2 ();
  if(txnVO!=null)
  txnrows = txnVO.findByKey (new Key (new Object [] {txn_id}),-1);
  If (txnrows! = null & & txnrows.length > 0)
  {
  SelectedRow PscTransactionsViewRowImpl = (PscTransactionsViewRowImpl) txnrows [0];
  txnVO.setCurrentRow (selectedRow);
  }
  }
  }
  
  How to select a row in the table easily (without the table is refreshed). ?
  
  Thanks in advance,
  Swathi

  Hi swati,

  Set property of 'changeeventpolicy' on 'none' & 'useRowHints' to 'default' for the list that you iterate.

  YP.

• Hierarchy Viewer does not get updates

  I have a hierarchy Viewer in my application. Say that it is a tree of the hierarchy of the employee-Manager. I perform operations Add, Remove-employee, employee-Move on this hierarchy Viewer. Its operation is, say I want to perform the delete operation, I select the node in the hierarchy Viewer, click the button remove on top and it performs the delete operation and the hierarchy Viewer partialUpdate. It happens after have delete/move/add, hierarchy Viewer always displays the old data, that is, even if I delete the node, it always appears when I update the viewer of the hierarchy (hv).

  I also made clearCache() hv and VO that I use. I even tried to re - run the query, but has not helped. ADF does any kind of caching? If so, what should I do to find new data updated?

  PS: I use 11g

  Hello

  I think that the cache of the VO is not updated with changes in DB. For this reason, the user interface component shows the lines of old.

  To synchronize the VO with DB cache after validation, follow these steps:

  1. in the model layer, open the request module assigned to the VO.

  2. Select the tab 'source' from the application module.

  3 inside of the tag "AppModule", add the following attribute:

  ClearCacheOnCommit = 'true '.

  RFH.

• Value of the session Variable does not get updates.

  Hello
  I have a Session variable, I am assigning it an initial value [3] during the loading of the page. But, during the drop value menu selection and the "submit" button hit, I update the value of the Session variable.
  The update is unsuccessful and the session variable is preserved the initial value. Here's the code used to assign the value to the Session variable:
  
  < ISdefined ("FORM.submit") cfif >
  < cfset Session.numTasksDisplayed EQ #FORM.filter # >
  < cfelse >
  < cfset Session.numTasksDisplayed EQ 3 >
  < / cfif >
  
  When to use cfoutput after these instruction to check the value of the Session variable, its gives me the initial value of 3. Form.Filter is the value from the drop-down list menu option selected.
  #FORM.filter # #Session.numTasksDisplayed # < cfoutput > < / cfoutput > < cfabort >
  
  Any help is appreciated.
  Thank you and best regards,
  Vijayvijay77.

  First of all, you cannot use EQ with CFSET comparison operator. It should result in an error. If this is done on the bottom, there will be an error and nothing is set.

  Also, are you sure that FORM. Offer exists during the validation of the form?

  -Fernis

• Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.

  Original title: updates

  Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.  Although I tried to reset nothing help.

  Have also tried to download Windows 10 but computer spends all day looking for updates, but nothing happens.

  As its been almost a year that it is updated, you may be better off to backup your data and backup of your entire system, so you can get back to this point at least if something goes wrong. Then:

  Update your anti-virus software and run a full scan. Then download, install, update and run a full scan with Malwarebytesfree. Keep it free, no need to start a trial etc. Malware can be a cause of failure of the updates, the scan won't take long to run and should report something nasty, if its there.

  Then you can try the following:

  1 convenience store update Windows - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter

  2 system update readiness tool - http://windows.microsoft.com/en-us/windows7/what-is-the-system-update-readiness-tool

  3 components of reset update - https://support.microsoft.com/en-us/kb/971058

  4. check that "Windows update service" and "Background Intelligent Transfer Service" are listed and running according to the details in this article - https://support.microsoft.com/en-us/kb/2730071 "

  If the above does not help, consider trying a 'repair installation system' - http://www.sevenforums.com/tutorials/3413-repair-install.html if you have windows installation discs, or a 'factory reset' (updated) If your PC came with no windows disk and was preinstalled. NOTE - in case backup your data and your system first in the form of data may be lost if something goes wrong, and data will be lost in the case of a factory reset.

  If you do not want to reinstall again, post back with more details, that is at least what is the error code when the updates fail? (find an update failed in "view history update", right click and click details.) Check a bit to see if the same error code. ). Then someone else can we hope to help more.

• my creative cloud is not getting updated. the update does not start yet. There has been 0% for the last 24 hours now

  my creative cloud is not getting updated. the update does not start yet. It was 0% for the last 24 hours

  Hello

  Please follow the steps below and check it, if it helps:

  1 - click wheel settings in the upper right of the cloud creative app > Preferences > sign out

  2 force quit Adobe all activity monitor processes / end of task for Adobe on the process from the Task Manager (e.g. cc, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  3-

  MAC: Right-click on the icon in the Finder and select the 'Go - To' folder option. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol") ~/Library (It will open the folder of the user's library.)

  Then go to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

  WINDOWS: C:\Users\\AppData\Local\Adobe\ MAA UPDATER and OOBE times

  4-

  MAC:  Go to the Apple icon > System Preferences > privacy and security > firewall > TURN OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  Go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be in ANY

  WINDOWS: see, turn the firewall on or off - Windows Windows help

  5 make sure there is no other Internet active safety program - if it is then go ahead and launch CC app and login and check

  Let us know if that helps.

  Kind regards

  Bani

• Security updates have blocked incoming messages in Windows Mail - security popup does not accept the password, error number: 0x800CCC92

  Original title: updates blocked mail in Windows Mail - security popup does not accept the password

  Hello - three updates installed security today (KB2691442, 2718523, 2596744).

  Now Windows mail will no longer accept mail entering into my pop3 account.  Security pop - up demand for a/c of the user and the password - I've checked tools > accounts > properties, reset the password, but it does not accept pop-up.  Here is the error message:

  .... POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Help please! John

  Hello

   
  See the steps in the links.
  Troubleshoot Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Windows Mail: Setting up an account of end-to-end

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Hope the information is useful.

• My windows Security Center does not open and I get a notice that "no software firewall is detected.

  My Windows Security Center does not open, and I am also unable to turn on my firewall.  I get notification "not detected any firewall software.

  Hello

  It seems that you need help to solve the problem of Windows Security Center. Please respond to the suite, which will help us to help you in the right direction.

  1. do you get an error message when you try to turn on the firewall?

  2. which antivirus app do you use?

  Refer to the following information and check the status of the issue.

  See the section "Nithyananda J replied on November 27, 2009" what about Windows Security Center

  The windows Security Center service cannot be started.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Windows-Security-Center-service-cant-be/d8250e7a-ee3c-4302-8CA6-9e2a10262feb

  I also suggest you to run the Fixit from the following link.

  Diagnose and automatically fix problems of Windows Firewall service.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  You can also try to solve the problem by running SFC scan

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Can not get updates more (error Code 80080005)

  original title: can not get updates any longer

  Have not been able to get updates since January.  Get the error code 80080005, but there is no solution for it.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. Save the file on your desktop zip and extract the file:
     -Right-click on the file and select extract all...
     -Click Next when prompted for the Destination.

     Therefore, you should see a folder called AccessChk on your desktop.

  3. Open the folder AccessChk

  4. Hold the SHIFT key and right-click in the window.  Select "open here command prompt.

  5. A command prompt window should open a similar message:
     C:\Users\\Desktop\accesschk >

  6. Type the following command and press ENTER:
     "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
     Tip: You should be able to copy and paste the command into the command prompt.

  7. Close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. Double-click Accesschk.txt (text file), it should open Notepad.

  9. Copy and paste your results with a new question in the forum of Windows Update.  (Make sure that you write 0x80070005 in the subject).

  Reference1

  If this is not enough: -.

  1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
      
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
     SubInACL (SubInACL.exe)
     SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.

  2. Please, go to the desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.

  5. Copy the following commands, and then paste them into the opened Notepad window:
      
     off @echo
      
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
      
     @Echo =========================
     Completed @Echo.
     @Echo =========================
  
  @pause
• After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
• View the desktop and right click the reset.bat file, then choose "Run as Administrator".
• You will see a window of type BACK treatment.
   

NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.