Security planning update in batch?

Similar Questions

• Security Essentials update error code: 8004FF01

  I tried to install the Ess s. client to update and getting error code: 8004FF01

  Hello

   
  What is the description of the update that you are trying to install?
  
  I suggest you try the steps mentioned below.
  Method 1: Download and run the diagnostic to troubleshoot issues with Windows update.
  
  The problem with Microsoft Windows Update is not working:
  
  http://support.Microsoft.com/mats/windows_update/
  
  Method 2: Try to reset components to update Windows from the following link, which would help you to install the updates of windows.
  
  http://support.Microsoft.com/kb/971058
  
  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows.
  Check if you can install the update.
  
  Method 3: If the problem still persists I suggest you to set up your computer in a clean boot state, and check to see if the same problem happens.
  
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  
  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
   
  If the problem is specific to the Microsoft Security Essentials update, you can post the question in the Microsoft Security Essentials community for assistance.

  http://answers.Microsoft.com/en-us/protect/Forum/protect_updating

  
  Hope this information is useful.

• Do not install the updates downloaded, they are put to day security, also updated Vista, also update the junk e-mail filter

  Vista: Do not install the updates downloaded, they are day security, also updated Vista, also update the junk e-mail filter. Other updates are installed. But these not installing. These updates: update for Windows Vista (KB2679255), update for Windows Mail Junk E-mail Filter [April 2012] (KB905866), a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2675157), update security for Windows Vista (KB2653956), a security update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x 86 (KB2656374)
  Please if you have an answer.
  Thank you
  Michael.

  Hi Michael,

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it works.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2: If the method above does not help, then you can reset the Windows Update components and check.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Let us know if that helps.

• I have windows vista, how to plan updates to windows from 02:00 to 06:00?

  How to plan updates to windows from 02:00 to 06:00?

  Duplicate of http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/windows-update-can-you-schedule-my-windows-updates/c8aa6f40-f3c7-402e-987a-ac1d430ba7a9 (03-11 Nov)

• McAfee security center updates. The event log shows no signature of threat.

  McAfee security center updates. The event log shows no signature of threat. That it states that I am protected I never had any "alerts" from him. Anyone know if it's OK or a way to check it out. The following is in the event log

  Log name: Application
  Source: McLogEvent
  Date: 2009-08-28 17:42:15
  Event ID: 5000
  Task category: no
  Level: Information
  Keywords: Classic
  User: SYSTEM
  Computer: XPS
  Description:
  The McShield service started.
  Engine version: 5301.4018
  DAT version: 5722.0000
   
  Number of signatures in EXTRA. DAT: no
  Names of the threats that EXTRA. DAT can detect: None
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      5000
      4
      0
      0 x 80000000000000
     
      23259
      Application
      XPS
     
   
   
      5301.4018
      5722.0000
      None
      None
   
  

  Thanks for the reassurance. Tech support McAfee response to any problem seems to be reinstalled, I've done a dozen times.

• Warning when I try to refresh the security planning

  Hello
  
  We get a warning we get a warning... That's the first time I have seen this in Version 11.
  
  WARNING: Refresh will recreate the outline for all Essbase cubes used in this Application based on the current definition of metadata in the planning for this application. Please save your file of outline and export data from all databases before proceeding. Click & #039; Refreshment & #039; to go forward.
  
  I want to know if I can go ahead and update the security if I get this warning and would even know why I'm getting this.

  Hello

  It is a standard warning that everyone gets, it's just basically saying that you have been notified that something goes wrong, you should always have a backup.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• You had me sent a message saying that my account should be upgraded for your secure new update?

  I received a suspicious email
  To: your account to our new secure update. < [email protected] >
  Subject: Confirm your Webmail: Admin, Staff, student, employee
  Up to: not disclosed recipients
  CCI: [email protected]

  Message:
  Click on the http://webmail-maintenance-team-upgraded-2.mozello.com/contact/
  or copy and paste into your browser to upgrade your account or your
  e-mail account will end immediately to prevent the spread of the
  virus.

  Thank you. I will contact roadrunner.com

• Connection failed - can not confirm security (since updated to 31) exception

  This morning I was able to access to our installation of plesk for our server (I had previously confirmed the security exception after receiving the warning) without problem. Then firefox updated to 31 and now it gives me this error:
  The secure connection failed

  An error occurred during a connection to (* website *). The issuer certificate is not valid. (Error code: sec_error_ca_cert_invalid)

  With no option to confirm any security exception. I am still able to access it through Chrome, but we all use firefox here (and would like to continue to do so). I checked on computers that have not updated yet and they have managed to get in again, I updated one of them and now they get the same error, so it's a matter of firefox with the new update.

  Any help would be appreciated!

  Can you put the bug for reference number?

  You can try to rename the file cert8.db in the Firefox profile in cert8.db.old folder or delete the cert8.db file to remove the intermediate certificates that Firefox has stored.

  If it helped to solve the problem, then you can delete the renamed file cert8.db.old.
  Otherwise you can rename (or copy) the file cert8.db.old to cert8.db to restore previous intermediary certificates.
  Firefox automatically records the intermediate certificates when you visit Web sites that send such a certificate.

  If that didn't help then remove or rename secmod.db (secmod.db.old) as well.

• Security/WindowsUpdate_800B0100 updates do not

  updates default security / system/files downloaded programs tool WindowsUpdate_800B0100 error code / installing...
  Initializing installation... done!
  Installing the hotfix for Windows (KB947821) (update 1 of 1)...
  .. It does not appear to go beyond 75% installed
  How can I solve this problem if the system tool is not? the answers seem to be aimed at windows 7... I'm using windows vista...

  Hello

  1st run CheckDisk

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• 'FAIL' SECURITY AND UPDATES OF PROGRAM IMPORTANT IN MY HISTORY OF UPDATE!

  I checked my history of computers up-to-date and I found a total of 77 MS Windows Vista security updates and updates of some regular to other programs that CANNOT install properly for some reason (I checked instalation and automatic updates) and I would like to know if I deleate all updates of 'IMPOSSIBLE' from my computer and if so how to do correctly and will be sent again when I'm done deleating them?   They have all been sent within a period of about 2 days 9 days out and have error codes different too! It has really messed up the performance and I need it's good!   Thank you!  MICHAEL...       I'll give you some of the codes too! Goes here! KB978207 KB890830 KB929123 KB967723 KB938194 KB959108 KB917468 KB9532722 KB972276. THANKS AGAIN!

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  What are the error codes and how can I use them?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-error-codes-and-how-can-I-use-them

  Windows update General troubleshooting

  Suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Save the Windows Update engine files
  http://support.Microsoft.com/kb/326253

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Updates to security not updated

  Never at night my computer wants to run automatic updates.

  Among it's always what follows.

  Security Update for Microsoft .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2418241)

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  a security issue has been identified that could allow a malicious user to compromise your Windows system that is running the Microsoft .NET Framework and gain access to information. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.  Details...

  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB983583)

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  a security issue has been identified that could allow a malicious user to compromise your Windows system running the Microsoft .NET Framework and gain control full top. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.  Details...

  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 update for Windows Server 2003 and Windows XP x 86 (KB982524)

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  This update solves a set of known issues in Microsoft .NET Framework 3.5 Service Pack 1. After you install this item, you may have to restart your computer.  Details...

  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Security Update for Windows 2000, Windows Server 2003 and Windows XP x 86 (KB979909)

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  A security issue has been identified that could allow an attacker to alter content digitally signed without being detected, when that content is consumed by an application that uses Microsoft .NET Framework on a Windows System. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.  Details...

  Update Microsoft .NET Framework 3.5 SP1 for Windows Server 2003 and Windows XP x 86 (KB982168)

  They seem to be able to install properly, but the next night the same updates are there waiting to be updated.

  These seem to be associated .NET (I posted in VB development but he threw.

  I run Windows XP with Service Pack 2

  Also in Visual Studio 2005

  See: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/b2804885-a64f-4306-af12-2b52aea2fee6/#2e0e8ec4-e0bc-4604-aa26-8f1b17ece0ee

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• update of security (kb956572), update for windows xp (kb968389) fail repeatedly and promotion to install guard

  IAM running windows xp professional sp3 and installed the updates successfully but these two updates can be installed even if they are uploaded also went to Microsoft Update and it will not
  even show me updates. The chart continues just scrolling and scrolling.

  Thank you.

  Hi EGYGHOST,

  Method 1

  Manually download and install the update failed.
  Update for Windows XP (KB968389)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=cb9a7ba1-72c7-4c72-A802-ac5bb3442ce4

  Update security for Windows XP (KB956572)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=73d2324f-BE59-4b0c-B1ac-9876a13c2c03

  Method 2

  Try the steps in the Microsoft article below and check out them.
  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation
  http://support.Microsoft.com/kb/906602

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I try to install windows antivirus security plan.

  Please help me to install the update to windows.

  Hello

  If you need more please tell us your version of Windows and 32-bit or 64-bit.

  You must uninstall all antivirus/security products you have on machine now. See the Web sites of their creator
  for removal which is important tools because they leave remnants if just uninstalled. Download replacements
  you select before you remove the existing ones and then install the new.

  Here's what I use and recommend: (these are all the free versions).

  For ALL those that you decide to use the download - SAVE - go where you put it - right click-RUN
  Administrator - when finished - RESTART and do the same for the next.

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
  Microsoft Security Essentials also proved very reliable and compatible. You want to MSE or Avast
  and not both. Add Prevx either.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• automatic security patches/updates will not be installed

  I have several updates automatic safety that will not be installed.  I tried to intall them separately and even disabled my firewall, but they won't install always.  I'm having problems to open my mail in Hotmail as well and have tried all of the fixes suggested in the success of wihout forums. These two problems may be related?  I have installed Mcafee and it's date-said I have no viruses.  Can anyone help?

  Hello

  · What are the security updates that you are trying to install?

  · What is the error message or error code you receive when you try to install the updates, and also when you try to open a mail?

  · Do you remember all the recent changes on the computer before the show?

  The question doesn't seem to be intertwined.

  Search for the installation error code that your computer has saved when the Windows update installation failed. To do this, follow these steps:

  a. Click Start, click all programs and then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the status column of this window, find the failed to install update and then click on the red X.

  (d) a new window opens that displays the installation error code.

  You can check the link below: how to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation: http://support.microsoft.com/kb/906602

  For the problem with windows Live, I suggest you to post your query with the required information in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

• Re-Installation of security KB2644615 update failed

  KB2644615 has been successfully installed on January 11, 2012... about 2 weeks later, quite separately, my Vista Home Prem SP2 is become unstable so restored to a point of date before Jan 11... Since this update of security refused to install properly and blocks other Updates MS to settle if allowed to run. In fact it installs, but fails in step 3 of the configuration of re - start the update.  Tried Safe Mode + MSCONFIG with selective S/U & only MS Services running etc. without success... That Pasa? It has really become a nuisance.

  Hello

   
  Method 1:
  Check out the link and run the Fixit who is with the article. You can also try the steps outlined in the article.

  
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358
   
  Method 2:
  
  Visit the provided link and try the steps of troubleshooting mentioned in the article.

  
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates