Warning when I try to refresh the security planning

Similar Questions

• When I try to refresh the Web page it say upload in progress, but does not show the State

  When I try to refresh the Web page it say ongoing upload, but does not show the State, so I don't want to close the browser, but I want to know how much longer it will take to complete the download.

  Hi Dana

  When you download to revel in adoberevel.com, you will not get a time remaining indicator. If please do not close the browser or your download will be completed. Download time is dependent on the type and the size of the file and your connection speed.

  Guinot

• I want to use the digital books from the library, but Explorer encounters a problem and needs to close when I try to get the security update.

  I want to use the digital books in the library. When I try to use the link below to get the media player update security, as soon as I got to the page, I get a a get several times the same error - Internet Explorer has encountered a problem and must be closed and the page goes dead. Explorer trys to regen of the page, but it keeps getting an error. What should I do now?

  You can download the upgrade of Windows Media Play Security 2.5.0.1 under the following link.
  
  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Hello

  Follow the steps below and check, if it helps:

  1 reset the management of digital rights (DRM):

  a. Click Start, click Run, type explorer.exe and then click OK.

  b. on the Tools menu, click on Folder Options and then click the view tab.

  (c) in the area of advanced settings, under hidden files and folders, click Show hidden files and folders.

  d. clear the skin protected operating system files check box and then click OK.

  e. Locate the DRM folder on the hard drive. The DRM folder is usually located at the following location: C:\Documents and Settings\All Users\DRM Windows

  f. rename the folder to DRMbackup DRM.

  2 remove the DRM registry key:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. close all open Windows Explorer Windows.

  b. Click Start and then click Run.

  (c) in the Open box, type regedit and then click OK.

  d. look for, and then click the following registry subkey:

  e. HKEY_LOCAL_MACHINE\Software\Microsoft\DRM

  f. remove the key and restart the computer

• Strange the Task Manager warning when you try to complete the csrss.exe process.

  I have recently had a few horses Trojan one my system. In my paranoia I'm looking for anything that could be a virus remaining. I was looking through my list of remaining process and ensuring that everything was legitimate. I was watching csrss.exe to check to see if it was in the right place on my computer. When I right click on the process, I accidentally hit end process. The warning displayed was different from warning of other processes that I tried to stop, he said "you want to interrupt the system process"csrss.exe "? To end this process stops the operating system immediately. You will lose unsaved data. Are you sure you want to continue? "Then below, there was a box that says 'give up unsaved data and close '. When this check box is selected, a button that says closed which was gray now became available to click.  I just found it strange and I've never seen this warning before ending other processes.

  IF YOU DON'T WANT TO READ ABOVE:
  The warning was "you want to interrupt the system process"csrss.exe "? To end this process stops the operating system immediately. You will lose unsaved data. Are you sure you want to continue? »

  Underneath, there is a box that says 'give up unsaved data and close '. When this check box is selected, a button that says closed which was gray now became available to click.

  Thought it was strange.

  Well, it's because you probaby not tried to put an end to such a crucial process before.

  Os the Client/Server Run-Time Subsystem CSRSS is an essential subsystem that must be running at all times.  CSRSS is responsible for console windows, creating or deleting threads, and implementation of some parts of the 16-bit virtual MS-DOS environment.

  It's like saying, "Hey - you don't need this wall in your home, you?

• The "size of Board art" seems incorrect (1/2 actual size) when you try to modify the work plan?

  Anyone had this problem before? Im working in CS4. When I try to "change artboard" to change the size of the presentation of the document, the size seems to be incorrect? In fact his appearance as a 1/2 size real. By example, if I created a new ink paper the size of the bed as: 4.25 "x 5.5" instead of 8.5 "x 11".  In the preferences, the units all seem to be configured correctly. I am able to create a box to size accurately, but not the work plan? It's never happened before. I feel that I have changed something by accident in the preferences? But can't seem to find a solution. Any help would be most appreciated. Thank you.

  Are you sure that you look at W: & H: instead of x and Y:

  

  A show to see artboard sovereign and after a screenshot of your document preferences.

• HP probook 440 g 2: 1721 error occurs when I try to install the client manager of HP security

  Error code 1721 occurs when I try to install the HP Security Manager in HP probook 440g 2 having win pro 8.1.

  The issue was resolved when I formatted my system and reinstalled the drivers.

• Receive error message when you try to download the update update for PowerPoint 2003 (KB957784) security

  I still receive an error message when you try to download the update to update security for Microsoft PowerPoint (KB957784).

  I searched night and day for a solution - even contacted microsoft by e-mail.  The specific error is: Code 57F

  It is displayed when I press the "get help with this error message:
  "WindowsUpdate_0000057E" "WindowsUpdate_dt000"

  It was the E-mail feedback:

  Thank you for your email about problems with the download of update of security for Microsoft PowerPoint.

  I understand your concern. Due to the nature of the technical issue, it was not possible for me to respond to your request. There are number of ways you can get technical information to our support team.

  MowGreen-
  Understood the factor of masking - has considered it.  Still, I send my appreciation in this matter.  I would like to know if you think I should download the SP2 for Vista.

  Peace-
  Matt

  Service Pack 2 offered by Windows (automatic) update yet?

  Windows Vista and Windows Server 2008 service Pack is not available for installation from Windows Update and automatic updates does not offer

  Cause
  This problem can occur for different reasons. However, the following reasons are the most common:

  • Already, you have the service pack installed and do not realize it.
  • You must install another update before you install the service pack.
  • You have not installed Service Pack 1 (SP1) and so you are not offered the option to install the Service Pack 2 (SP2). SP2 requires that you have installed SP1.
  • Components of the system that you must have to install the service pack are not installed on your computer.
  • You have a piece of hardware or software on your computer that is listed in the section "hardware and software which if present will result in Windows Update and automatic updates offers is not a service pack " article.
  • You have installed a preliminary version of a service pack, and it was not properly uninstalled before that you tried to install the final version of the service pack

  Service Pack 2 for Windows Vista and Windows Server 2008 is not available to users for which the following update is hidden:

  955430 description of the Windows Vista and Windows Server 2008 installation feature software update released April 28, 2009

  See article KB, Matt. When the system is ready for SP2 [as in you will be informed of the automatic update], suggest then you download the full SP2 package, save, temporarily disable AVG and then install SP2.
  The MS KB article below has sound advice for steps, you have to take before installing a Service Pack

  What you need to know before you install Service Pack 1

  Microsoft offers support without charge to get SP2 installed or for the resolution of problems that arise after he installation

  Start here - free support for Windows Vista service pack problems

  If a problem occurs, you can also solve problems installing yourself-
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Error code: 0x80070005 when you try to download the update of Cumulative security for Internet Explorer 8 for Windows XP (KB2809289)

  can someone help me solve the following problem please? Error code: 0x80070005 is what appears when you try to download the update of Cumulative security for Internet Explorer 8 for Windows XP (KB2809289)

  Is this the same computer as in this other recent thread of yours? -Online http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/last-mse-scan-was-two-weeks-ago-is-ok-whereas-my/05eba51d-95f6-4a5d-b313-da0994e57543

• code Ox643 error when you try to install the update of security for flash player (KB923789)

  I get the error code Ox643 when you try to install the update for flash player (KB923789) security - after Mr fixit running and the application of other measures recommended, I still have the error code and get the installation error code. What should I do now?

  Is Adobe Flash Player v11.3.300.257 (or higher) installed? Test here using Internet Explorer (only!)-online http://www.adobe.com/products/flash/about/

• When I try to change the permissions on the folders, I see the error "an error has occurred applying security information to: < \\folder > access denied»

  Original title: APPLICATION SECURITY ERROR

  I recently changed my security permissions for a public folder to full control.  However, when I try to change the permissions of return, you receive an error "an error has occurred applying security information to: <\\folder>access is denied."  I then click on continue and I receive «Cannot save changes to authorization on <\\folder>access denied»  What waste? and how can I solve this problem?

  Hello Craig powers,.

  For that matter, please submit this question to the forum below for Home Server.

  Home Server:

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

• details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  does anyone know how to go beyond this error?

  Thank you.

  Moved from Vista to install, upgrade and activate Forum.

  Take a look at this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-F964-4376-BFAB-2f29ea127c6a

• When I try I get the windows update error number: 0x8024400A

  When I try I get the windows update error number: 0x8024400A

  Hello

  
  This problem is limited to a particular update or all updates? Thanks for mentioning the number of KB.
   
  
  Follow the suggestions below for a possible solution:
   
  Method 1
  I suggest you consult the site mentioned below:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.microsoft.com/kb/836941.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   
  Method 2
  If the problem is not solve I suggest you try the procedure described in the link mentioned below.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
   
  See the link below and follow the steps suggested to DG_963 on July 1, 2012.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038a
   
  Let us know the status of the issue.

• I have an error code: sec_error_untrusted_cert when I try to access my secure school Web site

  I have an error code: sec_error_untrusted_cert when I try to access my secure school https://my.saintleo.edu/Web site. I run Firefox 32.0. When I have this error, it will not even let me add the exception, because it is "grayed out." Please I need help.
  Thank you

  Hello regba123, can you try to reset the file cert8.db in your profile folder, as described in "this connection is untrusted" error message - what to do?

• Firefox crashes when loading websites, freezes when I try to download any file and completely freezes when I try to access the Options menu. Help!

  As he says, I had a difficult time with Firefox lately, and I think that it's corrupted. I tweaked the settings according to the suggestions on this forum and others like him, but they made the problem worse. I've updated to the latest version of the browser that has not helped, and I finally tried the "Reset Firefox" button, which was worse than anything. I lost my custom settings and Add-ons for nothing, the problem persists.

  More frustrating is that it completely crashes whenever I click on tools > Options, so I'm not able to make changes to this new configuration. If I export my favorites safely, I will try to uninstall the browser and re - install an older version of it, but of course it now freezes when I try to export the bookmarks file.

  Thus, apart from trashing it and starting over... any suggestions?

  For the record, it's Firefox 28.0 (do not know what version it was the beginning of the sentence), and the window "On Firefox" said that it is up-to-date. I am running Windows XP.

  Thanks for any help or enlightenment, you might be able to provide.

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Please report back to see if this helped you!

  Thank you.

• Problems when you try to move the 3 stepper motors

  Hello

  I have problems when I Isaiah to compile a 3 stepper motors control program.

  I have 3 steepest motors and controller (3 SMCP33 + SMCP33-EVA) nanotec.com, they also provide an example of Vi to control a motor that works successfully, but problems happen when I try to adapt the program to try to start the 3 Motors. The final application for this is going to be a Cartesian robot XYZ so finally I need to program coordinates to move the 3 Motors.

  I am new to LabVIEW, so what I do is try to adapt the nanotec example to order 3 engine as follows.

  -J' I assign each engine a different address, doing so that I can run each engine separately. But when I try to run 3 programs at the same time, they work but all moving them the engine (the first that has been run).

  -If I try to make a sort of sub - VI is the same thing, only one motor is driven.

  -Moreover, I get a warning when I try this, I have attached a screenshot of this.

  I have attached the Vi and texture it to improve my description.

  I woul be grateful if someona can help aport.

  Kind regards.

  Thanks for posting the original.  By comparing the two screws immediately gives an indication of what might happen.

  In the picture you posted you circled two places where you changed the address of the reader. In the Example.vi - Nanotec address of the player is connected to about 14 seats.  So when you try to run the other engines in your modified program, the 12 places, you have not changed the address of the player are always preset to motor 1.

  What you need to do is to divide the example VI in at least three parts.  The first part initialization. The next part moves the engine.  The last part ensures that the engine is stopped and made any required another stop.  Each party becomse a separate Subvi. Each Subvi has the address of the reader as input.  The initialization and shutdown parts are placed before and after a while loop.  The movement parts are inside the loop.  You can use three of each sub - VI for the three engines or a Subvi combined with subVIs move three to manage all three engines.

  I can't say what approach might be better without knowing more about how you plan to order the engines - one at a time or all three at the same time, what kind of feedback is used, how management mistakes and other topics.

  Lynn