Security problem - version XI

Similar Questions

• Limit default value of security.tls.version.fallback - version 37

  I have read the guidelines and some of the recent questions, but not sure this is a good forum to post my question. Please please use me for a good if necessary.

  I noticed that Firefox Beta 37 has the following default values for the TLS configuration that I should always TLS 1.2 for TLS connection even if TLS 1.0 is allowed to use because you can not fall back to TLS 1.0, because the value of limited relief.

  Security.TLS.version.Fallback - limit; 3
  Security.TLS.version.max; 3
  Security.TLS.version.min; 1

  The values of security.tls.version.max and min is the same as Firefox 36, but security.tls.version.fallback - limit is increased from 1 to 3 in Firefox Beta 37.

  Security.TLS.version.fallback will limit; 3 the default configuration in the next version of Firefox 37 official?

  Hi hshimoji, the answer is Yes: https://bugzilla.mozilla.org/show_bug.cgi?id=1084025

• OfficeJet Pro 8610: Get the Permission of HPeprint or security problem error

  I used printing wireless for several months successfully to print from my work computer, but am now able to print to the e-mail address provided.

  The error reads 'your message was not delivered because of a permission or a security problem.  It may have been rejected by a moderatory, the address can only accept email from certain senders, or another restriction to prevent any delivery.

  The Organization rejected your message: hpeprint.com. »

  I've reconfigured my printer to my router.  Any suggestions?

  Hey @LoreeW,

  Welcome to the Forum from HP Support. I hope you enjoy your experience here.

  I understand that you have a few problems with ePrint using your HP Officejet Pro 8610 e-all-in-one printer.  I want to help you with this.

  I recommend that you first check your printer to verify its intact ePrint connection:

  • Touch the icon (webservices)
  • If you see an address @hpeprint.com, I recommend that you try to send a test ePrint from a different email domain than what you use on your work computer.  If it prints correctly, we can rule out your printer as being a factor in this particular issue.  If your printer's Web services is enabled is more, re - enable.  Any problem would occur with this, click here to access another relevant post I created.  Scroll to my suggestion re: setting a manual DNS as this tends to help by allowing the webservices where fail the normal steps.

  If you were able to send your printer work ePrint of any e-mail domain other than the one you use at work, read on.  Click here to see an HP ePrint article that focuses on the various factors that can contribute jobs ePrint not printing not.  Note that some areas of corporate email may become incompatible with ePrint due to the presence of a digital signature in the outgoing message template.  EPrint jobs you send work meet these criteria?

  Please let me know the result of your troubleshooting by responding to this post.  Thanks again for reaching out in the Forums - we are always happy to help you.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below.

  Have a great day!

• Security problem with hidden extensions checked.

  I said I should uncheck "Hide extensions of the file types that you want to know" in Windows 7, because I could inadvertently download a document with a double extension like 'Memo.txt.vbs. If the extension is hidden, then it would appear like 'Memo.txt. It would be a security problem. Is this true?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Best calls "Windows Help" Attorney call me to say I have a security problem on my PC and wants that I let him remote connect to solve this problem, it is legitimate?

  The first few times we call I refused to listen to because it sounded wrong, but this time I heard him out and that's what they said. First, he was of the India, I think his accent and he said he was calling to inform me about a security problem with my PC, it is said to "Best Windows Help" and that my network was showing at its end with a red light indicating a problem. He had opened the Run command and type of command bar to display the observer of events and go to the newspapers of Win and click Applications, then he wanted me to scroll the Application events and see how many errors was there. Between 20 and 50 I said, he said oh yes you have a problem and that he could fix in a few minutes, then it puts me in a collaborator of his that says display the control bar run then type "Iexplore www.support.me" which led me to a "Logmein Rescue page to https://secure.logmeinrescue.com/Customer/Code.aspx. At this point, that he asked me to give him full access to my PC in which I said, "you're crazy, no way" and he said OK then your PC will freeze and crash and I said a few words very friendly back and hung up. They seem to call every month or two and it looks like the same guy. Is it a Con? Who is this company "best Windows Help and how are they finding me? They say the information they hold comes from Microsoft. My caller ID lists like V052409070106, phone # (202) 011 - 3341. What is everything. Also, my PC is not crash or freeze because I installed it 2 years ago. I am running Win 7 Pro with Microsoft Security Essentials and windows Firewall behind a Cisco router.

  Scam.  They said that my computer was downloading malicious code and therefore transmit signals the error on their server.

  They have a Web site, as afar as I can tell.  I asked the guy at the phone for his site.  He couldn't give me a Web site URL or couldn't pronounce correctly.  He was frustrated and hung up.  Scam.

• Security problems.  Adobe connects vires of intellectual property. and if so recognize who visited my recordings.  Thank you

  Security problems.  Adobe connects vires of intellectual property. and if so recognize who visited my recordings.  Thank you

  Connect does not collect IP addresses. Records can follow who saw them if viewers are journaled in Connect.

• File restrictions not met does not, major security problem with Reader shared.

  Summary: it is possible to transfer files freely between host and virtual machines, but are not limited to declared Shared Folders.

  I'm under VMWare Player 6.0.3 + tools under Win7/32, generally without problems. However, I just found out what seems to be a major security problem; It may have been there for years, I never checked. On a CentOS Linux VM and a Windows XP VM, I put folders always active; two folders are shared, C:\Users\ < name > \Desktop\VMWare (a subdirectory on the desktop) and R:\ (a RAM drive). "Card as a drive in Windows network, you can" is checked in the virtual Windows machine. There is no option for a folder always be not shared, the other only until the next poweroff (re point 2 below). I did some tests and was able to easily drag and drop files from the two virtual machines (running at once) to the host WITHOUT RESTRICTION FOR THE SHARED FOLDERS; I copied the files of the computer desktop virtual on the desktop of the host (not the directory said 'VMWare'), the office of the host on the desktop of the virtual computer and directory host random (C:\TMP) on the virtual machine, and then again to the desktop of the host.

  1. serious, important question: the VM seems to have free run of the host, not only in the shared directories.

  2. point minor: indicates the VMX (all below dossier_partage) file < sharedFolder0.expiration = "session" > but < sharedFolder1.expiration = "never" >; should not be the same thing, 'never' as records of actions are always enabled?

  I have shared folders only through settings, no direct VMX edition. The VMX has:

  sharedFolder.maxNum = '2 '.

  sharedFolder0.present = 'TRUE '.

  sharedFolder0.enabled = 'TRUE '.

  sharedFolder0.readAccess = 'TRUE '.

  sharedFolder0.writeAccess = 'TRUE '.

  sharedFolder0.hostPath = "C:\Users\ < name > \Desktop\VMWare.

  sharedFolder0.guestName = ' transfer to '.

  sharedFolder0.expiration = "session".

  sharedFolder1.present = 'TRUE '.

  sharedFolder1.enabled = 'TRUE '.

  sharedFolder1.readAccess = 'TRUE '.

  sharedFolder1.writeAccess = 'TRUE '.

  sharedFolder1.hostPath = "R:\". »

  sharedFolder1.guestName = "RamDrive.

  sharedFolder1.expiration = "never".

  That concerns me; I sometimes deliberately tried to expose virtual machines to viruses, in the hope that there is a Chinese wall between the host and the VM, except for shared directories.

  I am dong something wrong, is this expected behavior or is it an error in VMWare Player?

  Best wishes

  Looks like you're confused shared with drag-and-drop folders.  With shared folders, the host files are mapped in the comments (possibly as a Windows network drive).  Navigate in the comments under \\vmware-host.  Drag-and-drop is a completely independent feature.  There is no restriction on access to the drag-and-drop.  To disable drag-and - drop in VMware Player, power off the virtual computer and add the following to your virtual machine configuration file:

  insulation. Tools.Copy.Disable = 'TRUE '.

  insulation. Tools.dnd.Disable = 'TRUE '.

  insulation. Tools.Paste.Disable = 'TRUE '.

• I received this warning when I open a specific page on my Web site in Internet Explorer: MuseJSAssert: error calling the function switch: error: a security problem has occurred.

  Hello

  I discovered when I'm in Internet Explorer and go to the page "artists."

  and I click on a name, for example: "Abel team ELA / I ai Gomes

  I get this warning:

  MuseJSAssert: Error calling the function switch: error: a security problem has occurred.

  It is only in IE, not when I use Safari or Chrome

  This is the Web site link

  Any ideas how to solve this problem?

  There is an invalid hyperlink on the Abel Equipe ELA / I've got Gomes page on a piece of text which reads "with"your entry. You must find this text in the Muse, delete the hyperlink and enter a valid.

  

• Why doesn't Java Deployment Toolkit (click-to-play) is blocked, as the referenced bug is closed and there is no security problem not known in Version 7 U51?

  In my view, it is important to block insecure addons. But if you do it should be an open bug assigened. The bug referenced to this add-on is already resolved, so I do not know why this plugin is disabled. https://Bugzilla.Mozilla.org/show_bug.cgi?id=636633

  I have the problem that I want to use Secure_Auth that uses the Deployment Kit Java of nasty (via javascript) way that firefox does not see the deployment kit must be started. This is why I have not expected this plugin still for this web site. Since there is no available documentation how to do this configuration in a config file that I'm stuck at the moment.

  I'm a little surprised liitle which blocks all versions (same secure versions) is a way to get a good user experience.

  Concerning

  Martin

  MG_DAU,

  Why do you think that the problem is caused by the block of Java Deployment Toolkit, not Java itself? See http://www.java.com/en/download/faq/deployment_toolkit.xml and this document I found with a google search:

  • Oracle Java blocking the Java Applet of SecureAuth due unsigned Java components

  For general information on the use of Java on trusted sites, see:

  • How to allow Java on trusted sites
  • The Java plugin to view interactive content on Web sites

• WI - FI security problem

  When I activate the WEP security on my router (belkin F5D7630-4 (a) and on my laptop (satellite p20 801) I can no longer connect to the router. I tried 64 & 128 bit encryption, I've also updated the firm ware on the router, no luck
  using an atheros AR5001X + wireless adapter driver 2.4.2.14 version
  I can't find an updated driver for this device
  iI would be gratefull for any advice or help
  VAC

  Hello

  I have the Belkin F5D7230-4 wireless router and Tecra Mr. I have a problem and the configuration is very easy. The only thing that made me problems using the Belkin configuration software. After half an hour, I decided to set it up using router setting directly and I ended up in a few minutes. In my opinion you don't need updates. Just check all the connection parameters.

  If you wish, you can check this page http://www.adslguide.org.uk/hardware/reviews/2004/q4/belkin-f5d7630-4a.asp. Maybe you can find specific instructions.

• Windows Vista not able to support the WPA2 wireless security problem

  Recently, I upgraded my router wireless to a Linksys 400N series N wireless router.  I use WPA Personal / RTK to authenticate and on all my XP and Vista machines, I was able to enter the security credentials and connect to the network. However, on a computer Windows Vista SP2 I be prompted to enter a field of login/password / username each time I try and connect to the network.  There must asking me my password and that's it.  This same card was working fine like WEP when I use my old wireless router.

  I deleted this adapter wireless network and sharing Center, ensured that the machine is part of the domain, uninstalled the wireless network card (which is also a Linksys product), assured the latest version of the driver and tried almost all the trouble shooting tips I can think.

  I've seen this identified as a problem in a few threads but no final resolution.  Any help/suggestions would be appreciated (no suggestion to buy a Mac tho!).

  Update:
  ----------
  Well well, after a diagnosis much more, I have determined that it is certainly a problem of Windows Vista.  If I plug a different adapter in the computer (which runs on a different computer), I get the same problem.  I was on the phone with Linksys for an hour and basically they have thrown in the towel and gave me an RMA for their card, though I doubt it will solve the problem.

  Is there some registry entry to set the type of authentication for a wireless adapter?  It seems that Vista keeps thinking it is the incorrect authentication mechanism.  Is it possible to 'fix' service wireless on Windows?

  Okay, I think that the real problem is that Windows Vista doesn't have the type of select WPA2 security (which is what the router broadcasts).  Is there a way to enter in this somehow?  It seems that Windows determines the types of security available according to the driver for the wireless card.  However, I use a Linksys Wireless-G USB Adapter (WUSBG54) and it says that it supports WPA (although I can't determine if it is only WPA or WPA2 as well).  In any case, hope this additional information helps all those who have a few cycles to provide some guidance.

  Hello

  WPA or WPA 2 encryption is actually supported by the wireless card that you have installed on the computer. As you only could use WPA earlier, it seems that the wireless network adapter supports only WPA and WPA 2 encryption key.

  Because the computer is in the domain, we recommend that you post your request here for more support options.
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads/

  I hope this helps.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet security problem - I got a security alert was attacking my computer or filtered in and I could not access the internet

  Yes, all of a sudden, I got a security alert was attacking my computer or filtered in and I could not access Internet, I advocate for window / malware scanning and also, mcafee for extra security, but it happens still., why? Then a few days later, I was able to get on the internet again, only about 2 days, now I can no longer access the internet, Iget, open with file, message, so I guess I have to reinstall internet explore, some of my applications are not running, but I think that their always there.  I have scan Windows / Defender and mcafee installed and running on my computer, so what's the problem here?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Wipe security problem

  Hello

  I need immediate assistance!

  By updating the new OS version 10.0.9.1103 Beta 4 waterfalls, in navigation TargetSystem, I did not the sandbox options. As mentioned in the link below

  http://supportforums.BlackBerry.com/T5/Cascades-development/Beta4-TargetFileSystemNavigator-problems...

  I did wipe security... But after restarting the device, it displays just as 'Blackberry '... The device is not go further. Can someone help me solve this problem... Please, I beg you!

  Thank you.

  Thanks Soaman, that worked for me and now my Dev Alpha works properly again.  As you said so that it can work, but in the end he did, took a few tries.

  Thank you.

• Security problem in Chrome when closing the browser (4.2.6.00.03)

  Version 4.2.6.00.03

  Hello

  I have just been informed that in Chrome (version 43.0.2357.81 m) and in the settings in the section "getting started", if "Where you stopped to continue" is selected and that the browser is closed by clicking on the 'X' in the top right and then open again the last visited page appears without having to log in again.

  

  
  

  It is of course logical based on the selection in the settings, but the Cache in the browser security is set to disabled.

  

  Anyone know what to do when this does not happen?

  Can what information I provide?

  Thank you

  Joe

  RecX Ltd,

  Thanks again for your help.

  I could correct this problem. I went into the properties of the Application-> Security-> Session Timeout and entered the Session idle time in the text field instead of depend on the default values of the Skillbuilder Session Timeout of the plug-in.

  Thank you

  Joe

• Oracle 11g mediator WebService security problem-cannot call endpoint URI "" successfully due to: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: bad response: 401 Unauthorized

  Hi all

  I have a RS of mediator who invokes an external secure Web service. Despite I put the username and password values, I get HTTP 401 error.

  Here is my source of mp plan.  Any comment or help is appreciated.

  <? XML version = "1.0" encoding = "UTF - 8"? >

  < mediator name = "AIASystem.OSM.ProcessSalesOrderFulfillmentOSMCFSCommsWSProducer_RS" wsdlTargetNamespace =" " http://Oracle.com/ESB/namespaces/AIASystem_OSM "xmlns =" " http://xmlns.Oracle.com/SCA/1.0/mediator "> "

  < name of operation = "run" >

  <>switch

  < name = "ProcessSalesOrderFulfillmentOSMCFSCommsWSProducer.CreateOrderBySpecification - case" executionType 'direct' = > "

  < action >

  < transform >

  < name of part = "$out.» CreateOrderBySpecificationRequest ".

  function = ' xslt (xsl/ProcessSalesOrderFulfillmentEBM_To_CreateOrderBySpecification.xsl $in.). ProcessSalesOrderFulfillmentEBM) "/ >"

  < / transform >

  < assign >

  < copy value = "admin".

  ' xmlns:wsse1 = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd "

  target = "$out." Header.wsse1_Security/wsse1:Security/wsse1:UsernameToken/wsse1:username"/ >

  < copy value = "Data1234".

  ' xmlns:wsse1 = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd "

  target = "$out." Header.wsse1_Security/wsse1:Security/wsse1:UsernameToken/wsse1:password"/ >

  < / assign >

  < invoke reference = "ProcessSalesOrderFulfillmentOSMCFSCommsWSProducer."

  operation = "CreateOrderBySpecification" >

  < onReply >

  < transform >

  < name of part = "$out.» ProcessSalesOrderFulfillmentResponseEBM ".

  function = ' xslt (xsl/CreateOrderBySpecificationResponse_To_ProcessSalesOrderFulfillmentResponseEBM.xsl $in.). CreateOrderBySpecificationResponse) "/ >"

  < / transform >

  < response / >

  < / onReply >

  < onFault type = "InvalidOrderDataFault" >

  < transform >

  < name of part = "$out.» OrderFault ".

  function = ' xslt (xsl/InvalidOrderDataFault_To_OrderFault.xsl $in.). InvalidOrderDataFault) "/ >"

  < / transform >

  < fault type = "OrderFault" / >

  < / onFault >

  < / call >

  < / action >

  < / Body >

  < / switch >

  < / operation >

  < / Ombudsman >

  Hi all

  The problem is solved by adding the three properties below to the definition of the external service in composite.xml.

  Best regards

  Override = "may" > true

             

  Override = "may" > username

             

  Override = "may" > password