See the SD card on the Simulator

Similar Questions

• Send SMS to the Simulator

  Hey,.

  I have an application that uses 10.3 specfic API and I need to send SMS messages to the device Simulator to test some features, but as far as I can see the Simulator controller is not supported for this... Is there something I can do? I only have one device that I use my driver all day and I don't want to use the sdk gold on it

  Thank you

  Daniel

  The problem is that the sms app is not installed in the Simulator, if you need a device to do everything related to sms.

• Re: Satelite L750-1MT - cannot see the Intel integrated video card

  Hello

  I have Satelite L750-1MT and Win 7/64-bit and I can see the integrated Intel video card in Device Manager, so I can't install the driver for it. The laptop works with dedicated map, but why I can't use built-in one card too?
  On the site I found the Intel driver only for Windows 7/32 bit and not 64-bit.
  What can I do to use the onboard too?

  Sorry for my English.
  Thank you!

  I can see on the Toshiba download page, all drivers for Win7 64 bit are available and display driver for your model mobile, you can find HERE.

  According to specification of mobile has your model of laptop NVIDIA graphics card so I put t understand why you need Intel display driver. Am I missing something?

• Software JetDirect 380 X can not see the airport card in the laptop G4 PPC

  Hello

  I tried to add a customer to the airport. It's a LaserJet 1200. But the software that comes with the JetDirect tells me to install an Airport card in the laptop. Now I can join hpsetup and print to the LJ 1200. But in practice I have to disconnect from the internet and the map Airport.  So, I know the JetDirect and LaserJet 1200 work very well. I tried different settings on the airport, but nothing has really changed the software on the laptop not finding the Airport card.

  Now I have a WOW goes a Xsense MIH 130 Xrouter, then go to the Airport Express Terminal. All Mac desk top of page 933mh, 1.67 ghz powerbooks. I use OSX10.4 to 10.5.8.  I don't know if the router is the problem or if the parameter in the jetdirect should be changed to the ad-hoc to something else. Don't know how to do this. With it, do not see the map Airport, I can't do the enbedded 192.0.0.192. There are a lot of maybe if I do this or if I do this it might work. Since the configuration of the printer in the TCP/IP section page everything below the line, Config by: is not specified.

  Thanks for any advice.

  Well again I was able to get to the stage 1.6 (in 10.5.8 printing Center is not the same). I could remove the printer that was working on its own network of HP. But was unable to add a printer in 0SX 10.5. Perhaps through IP printing, but do I put as the address? It is the site of HP to get instructions on a 380 X and another printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 115 & prodSeriesId = 29789 & prodTypeId = 18972 & prodSeriesId = 29789 & objectid = c00257796

  Maybe I should to the left of the printer, but I've changed the SSID in the jetdirect to match the network. The IP printer 192.0.0.192 or 192.0.0.193 or just use the network name it was changed to?

  To close, but I thought a few times.

• HP 13 X 2 Split does not see the Micro HD card

  I got no problem with Micro HD card.  I use it to back up my work.  All suddenly the computer does "not see" it.  I tried to get out, but it does not "Spring".  Two part question, how do you remove and reinsert the card.  Usually, the map is to push and it comes out for the withdrawal.  Secondly, there is a setting that needs to be reset.  No changes have been made to the system.  The card just stop working.

  Windows 8.1

  Processor Processor Intet Core i3-4020Y @ 1.30 GHz

  Installed memory 4.00 GB

  Process system Type 64-bit x 64

  Pen and touch: Ful window Touch support with 10 points of contact

  Hey @Sugarwood ,

  Welcome to the HP Forums!

  If the card was already working the first thing that we should try is a system restore. A system restore back the PC to an earlier date without deleting your personal files. It will however updates to software and the driver of the room, uninstall any software recently installed after the date selected.

  Do to run a system restore, please see the following guide: use Microsoft System Restore (Windows 8). Try to restore to be for it started and let me know if it works.

  To remove the microSD card: you are right. Based on the microSD card should eject as if spring loaded.

  Thank you!

• Asustek, vista ultimate installed the driver, but MC Mercury capture card do not see the map?

  In Windows Vista Ultimate, I have an Asustek Mercury capture device. After install Vista see the card and install the driver. When I try to configer the card in Windows Media center, and then I get that there is no tuner devices!

  How can I solved this?

  Concerning

  Joop

  Hi Joop,

  ·         The TV tuner appears in the devices under sound, video controllers Manager?

  ·         Your TV tuner card is updated?

  Follow the suggestions below for a possible solution:

  Method 1: Look for errors in Device Manager

  a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  b. in Device Manager, look for the device, then double click on the name of the device.

  c. the general tab look for the status of the device for any error code indicated.

  Check out the link:

  Get help with Device Manager errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

  Method 2: You can also visit the following links and check if it helps.

  Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

  http://support.Microsoft.com/kb/934531

   

  Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

  http://support.Microsoft.com/kb/929453

  Let us know if that helps.

• I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not!

  I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not! I also uninstalled and Reinstalled but I don't think that worked.

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  Mini092911 - 02.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 116
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: ce621e4c-18c8-469e-8f97-42590f35c1d9

  AND:

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  WD-20110929-1029 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: a59df662-85fc-45dd-a4b0-537bf6e212b3

  Hello

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) if the video device
  is integrated on the motherboard. Also check with Nvidia Support, their drivers and documentation online
  and ask in their forums known issues.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  -------------------------------------------------------------

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="" this="" link="" read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  ----------------

  BCCode: 117 0 x 00000117

  Bug VIDEO_TDR_TIMEOUT_DETECTED control has a value of 0 x 00000117. This indicates that the display driver failed in a timely fashion.

  BCCode: 117 0 x 00000117<-- read="" this="">
  * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

  1. update the video driver - also look for the BIOS and chipset of low level drivers at the manufacturer of system
  of (card mother manufacturer custom systems). Check with Nvidia Support and forums.

  2 are looking for Virus/Malware.

  3 check the hard disk for errors - run Checkdisk (see below)

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I wore a work Application TV live Android-based BlackBerry App. When I run the app on simulator.iam BB10 see the following error

  When I run the app it shows first of all my wallpaper or the Welcome screen

  as shown in 1st.jpg

  

  Then after a few seconds, second page will display the page connection as 2 .jpg

  

  After loggin with my facebook account it will show the list of channels like 3rd.jpg

  as below

  

  When I click on the above content as stated in the 3rd.jpg

  IAM, seeing the error as below: correct my problems and guide me how to run my application perfectly.

  

  You must test with the Simulator 10.2 as well, absolutely.

  Yes, you need to download Android 2.3.3. Since the SDK Manager.

  Then, choosing it as a target in the properties for your project you can expect to get compilation errors. It will indicate the parts in the source code that must be changed or adapted to be compatible with the level of the API 10, respectively to allow your application Android runs correctly on the 10.1 BB Android Runtime (and probably on PlayBook as well).

  Here you have an article about it on the ActionBar compatibility in Android:

  http://blog.imaginea.com/Android-handling-ActionBar-compatibility-issues/

• Simulator deploy token not to see the place. How to return to the home screen of the setting screen?

  I tried to test the app on my bb10 Simulator,

  of webworks...\bin, I ggenerated dubugtoken, then use blackberry - deploy deploy IP 192.168.59.130 Simulator.

  but side Simulator, I do not see that this token of debugging has been deployed.

  What should I do?

  How to return to the home screen of the setting screen? There is no back button the page setting of the Simulator.

  Thank you.

  Hi neemliu,

  To return to the home screen, you must slide up from the bottom of the screen. You need to make the same gesture, using your mouse when you use the Simulator. Drag the mouse with the lower edge of the screen to the top.

  What do you see in the output for blackberry - deploy when you deploy the token? He succeeds?

  Have you tried to deploy applications? The process is the same, if you can deploy applications then you should be able to deploy the debugging token.

• Can not see my App in the Simulator

  When I run (debug-> go) apply for BB JDE, Simulator starts. When I load my .cod on Simulator file using the file menu-> Java program load. I don't see my app in the Simulator. Please tell me what to do. I want to debug and test my application.

  In the JDE Menu "project / all of the ongoing projects.

  Only the project asset (s) copied.

  AND... Look in the folder for downloads on the Simulator - your application will not be on the homescreen of icon.

• More stuck small simulation on larger project. Can't see the legends of failure

  I pasted a number of smaller blades explaining how to run a process step by step on a project wide (by using a blank slide for the latter), but I do not see the legends of failure for click boxes. However, I see the "tips" popping up. Any suggestions as to why I see a kind of legend, and not the other?

  I forgot, but now I see, you're on CP7, right? Any of the forms on the slide is interactive (button)?

  Could you try to copy a blank slide from another project, that has a theme that do not spoil the slide blank? I suspect it has to do with this model of slides, indeed.

  I still don't understand why you do simulations in another resolution. With this workflow, I understand, but you're talking about copy/paste?

  Create and use a Master blade 'Knockout' - Captivate blog

• Hi, just sign for a package monthly, received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I connect.

  Hi, just sign for cloud of plan monthly photoshop, has received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I open a session.

  There is no serial numbers for products Creative cloud,

  Sign out of Creative Cloud App and sign in the back once

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  If the trial warning still appears, then make sure your hosts file once entries

  Log, activation, or connection errors. CS5.5 and later versions

• in lightroom 5, I was importing images via a card reader. Now you can see the images on the computer but when I try to import it says that it cannot read the card of ideas how to fix?

  I was importing images via reader of card without problems. Now, all of a sudden, I can see the images on the screen, but when I try to import the computer says it cannot read and quote the numbers of images. No idea how to fix?

  Please give us the exact error message.

  Please indicate your operating system.

  Please indicate the exact version of Lightroom you use.

  Please give us any other relevant details.

  -What this means: "now, all of a sudden, I can see the images on the screen? You are looking in Lightroom or your operating system or the screen of the device? Where?

• Adding SCSI - HOST OS card works fine, GUEST operating system does not see the new hardware

  I have a HOST Windows XP Pro SP3 with VMWare v6.5.2 running Windows Server 2003 R2 STD, SP2 as OS GUEST running on any new Dell Precision T3500 Workstation.

  I've closed the COMMENTS and then HOST. Installed an Adeptec SCSI 39160 card in the PC. The card is a 64-bit and is installed in a PCI 32-bit slot. (It is backwards compatible with 32 - bit)

  Powered on PC. Install the drivers of Adeptec on the HOST. Works fine and I can see the card under Windows XP. Rebooted and everything is always OKm POST shows the installed card and search devices. I have no device attached at this point.

  GUEST operating system has started and it does not automatically detect the card. Tried to run the Add Hardware Wizard and same result. Tried to use VMWare to install the new Hard ware with no result.

  Can tell you how I can get the OS TO see / use the new SCSI card?

  golden rule:

  old guest will love the buslogic controller

  new comments will love the lsi-logic controller

  It depends on your guest

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Not able to see the cards of weblogic console

  Hello
  
  I installed weblogic 10.3.3 and soa 11.1.1.3 as well as the base XE and RCU 11.1.1.3 data. In the weblogic console, I am able to see DbAdapter and AqAdapter, not Abel to see the remaining cards like FileAdapter, FtpAdapter, OracleAppsAdapter. Can someone help me...
  
  Thanks in advance...
  
  Published by: 847859 on April 25, 2011 03:49

  These are the resource adapters that must be installed:

  FileAdapter
  DbAdapter
  JmsAdapter
  AqAdapter
  FtpAdapter
  SocketAdapter
  MQSeriesAdapter
  OracleAppsAdapter
  OracleBamAdapter

  you don't see anything strange about them in the newspapers?

  In the file config.xml against your domain, you should have something like this:

  
  OracleBamAdapter
  AdminServer
  RAR
  C:/Oracle2/middleware/Oracle_SOA1/SOA/connectors/OracleBamAdapter.rar
  329
  DDOnly
  nostage
  

  It aims at something?