See your layer in a Rubylith mask
How can I display the layer as a Rubylith mask. I can't find it in shotcutes which categories are sub? hope someone will help me.
The key "\" is the shortcut.
Tags: Photoshop
Similar Questions
-
my laptop is 93.1% full so its quite slow work... I was on a website and I tried to click right (I needed to copy something) and the computer was slow, it didn't work. (already happened). so I tried a few times right click and before I new it this line where you can see your bookmarks (and other stuff) had disappeared. ! I tried right click again to see if I could get back, but it did not work. then I tried to turn off the computer and it still does not work. How can I get that back? and if I get it back, all my favorites will be gone?
Versions of Firefox 3.6 + have a feature to allow the user to hide the Menu bar.
Press the Alt key to temporarily show the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.
The F10 can also be used on most PCs to temporarily reveal the menu bar. -
The requested URL was rejected. Please see your administrator.
Your support is ID: 12371425760646637041
Impossible to allow:
missing service xapi node
Please visit http://www.sony.con/mydash for help with this problem. -
Original title: accidentally disabled administrative account in windows XP
When I was trying to figure out how to remove the login screen, I turned off accidentally my own admin account once I have restart my PC log on screen always there and says "your account has been disabled. see your system administrator. I don't have guest account on the computer and now I can't log on. I've tried safe mode, but could not = (.. What do I do?)
using Windows XP Media Center Edition
y at - it a way to get to the page of the log on screen computer management to enable administration account... Please help me.
Hi NineFoxes,
1. have you tried to connect to the same account in safe mode?
2. do you think that user built-in in Safemode administrator account?
3. what happens if you press Ctrl + Alt + Delete in SafeMode on the login screen?The built-in Administrator account cannot be disabled. We recommend that you check if there is a visible administrator in safe mode and login to the other user account admin user account.
See disable or enable a user accountPlease provide us with more details, so that we can better help you.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: user account with an effort of parental control
After logging in to my admin account, I created two user accounts for my children, set up parental controls for both that I created, when I tried to set up the third account that he would allow me to activate parental control. It seems that he is trying to load the screen to give me the parental control options then the window disappers and another small window appears saying "cannot make changes to parental controls settings. If the problem persists, see your system administrator. I close the window, and then open the parental controls for other accounts, and they work very well, allows me the chance to change. I deleted the third account several times, making sure to create on behalf of others, just like I did the first two. Still no luck. Can I have only 3 total accounts? My administrator account and standard users 2.
How can I get a standard user account third with parental controls?
Hello
Create a new user account and check if the problem persists, the problem does not persist in the new user account, then fix the damaged user account.
Create a user account (Windows Vista)
Screw a damaged profile (Windows Vista)
Check out the link below to check if the parental control is correctly defined
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls-activity-reports
Hope this information helps.
-
Whenever I enter my correct password in my windows account it rejects a message and it comes up saying: "you cannot connect because the logon method, you use is not allowed on this computer." See your network administrator for more information. "I can't seem to be able to enable or disable anything because the profile I'm using on my computer is the profile of"Guest ".
Karima,
Applicable to Windows 7.
The following steps require administrator credentials.
- Use the Windows + R or "Run" in the start menu, then type gpedit.msc.
- Navigate to Computer Configuration > Windows settings > local policies > user rights assignment > consider all policies "prohibit the newspaper on" to check if your guest account is listed. Remove account from the list, and you should be fine to continue using your guest profile.
Good luck.
James
-
Original title: Parental control does not
Try to set up Parental controls for my son's account. I have an account manager, go to control panel / user accounts / parental control - click on windows expects to obtain two error message with the same message: "unable to make changes to parental controls settings. If the problem persists, see your system administrator. "I'm a sysadmin, so what's the problem?
On a side note, I have two children on this computer. Had to remove my son because he downloaded a virus. So before the two children had parental control. But when we were going to change their times permit, he would give this error message but weather changes would take place. Now that I am setting up a new account for him, can't get parental controls to work.
Hello
Step 1: turn off UAC (User Account Control) and check the result
See how can I change the behavior of user account control by using the slider? :http://windows.microsoft.com/en-US/windows7/How-do-I-change-the-behavior-of-User-Account-Control-by-using-the-slider
Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
Step 2: I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.
Create a user account
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
Check out the link below to check if the parental control is correctly defined
http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
"Your account has been disabled. Please, SEE your system administrator.
I accidentally disabled administrator. Now, when I start my computer, I get a message "your account has been disabled. Please, see your system administrator.
I tried several Solution i.e. Safe mode and allowing via cmd, but none of them doesn't work. In my first time I had an opportunity to enter the password and identify you to windows live account. But now I don't get any option and see a message "your account has been disabled. Please, SEE your system administrator. Please help me what to do... I did not create a system restore too...Hi Mvrandazzo,
You can read this article to learn more about the start of Windows including the safe mode settings.
Start settings for Windows (including safe mode): http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode
Thank you.
-
Photoshop CS5 - Move layer with a vector mask applied
Hello world
I work with Photoshop CS5 and that you have encountered a problem. I can't seem to select a layer (with a vector mask applied) and move it, even with the automatic selection on layer. I can move when the vector mask is off or when I rasterize the vector mask.
Am I wrong in thinking that I was able to select a layer (with a vector mask applied) before, and it is a bug? Or I'm completely wrong and it has never been possible?
I have attached a screenshot for reference.
Oops, after re-reading my question I realized that I didn't have the word correctly.
I would like to select the layer/object and physically move around the artboard using the move tool. But it won't let me select and move around, unless I have clear/rasterize the vector mask.
Thanks if Yohanna! My bad.
-
How to copy a layer in its own mask
in a PSCS6 tutorial, I am told to "make a mask of the layer and then copy the layer in its own mask of" I gave the key combination "opt + click", apparently to copy this layer into its own mask. It does nothing and I'm lost.
I use i7 iMac and lion 10.7.5
Thank you
Vince
Post edited by: vinsolo
Target a layer (highlight in the layers panel), press Cmd + A to select all and then Cmd + C to copy.
-
How to replace a layer that has a mask applied without affecting the mask?
I have a layer with a photo. I animated a mask to this layer, but now the client wants the picture replaced by another. When I add a new photo in a new layer and copy the properties of the good work the mask layer mask lands in a different location than the original. I tried to make a replacement of the images with the source photo try to make the new photo but the same results, the mask always gets repositioned.
How can I replace an image on a layer that has a mask run on it by another without affecting the mask?
Thank you
Steve
If they are of different sizes, use the old layer as a track matte for the new.
-
I don't see a thumbnail of the mask layer instead of the layer mask itself when I add a layer mask to the CS6. How can I change this so the layer mask
appear in the layers palette?
Thank you
Marc
From what I remember of the CS6, it's the same CC follow these steps: in the layers palette, click on Panel options
Click on the larger thumbnail
The layer mask should now be big enough to see. Otherwise, you need to display it on the screen by alt clicking on
on a PC option by clicking on the layer mask on a Mac
-
Problem with layer in PSE 9 masks
Yesterday my layer in PSE9 masks stopped working for midway through an editing session. I can always create a layer mask and reveal all or hide them all (it displays in the layers Panel on the full editing screen), but I can't change the areas of paint mask to hide or reveal the parts of the mask. No clue as to why it happened all of a sudden and how to fix it? Could I have accidentally "toggled a switch" somewhere? I hope not to have to reload the program from scratch, so suggestions as to a fix would be appreciated.
AHA! The Brush tool did not work, but as I was dinking with it, I realized that it was not defined in "Normal" mode. When I changed the brush returned to 'Normal' it works great! * sigh * sometimes I'm terribly slow! Laughing out loud
Thanks for your help, hatstead! If you didn't have me focused on the Brush tool, off the coast of the layer itself, I would have been banging my head against the wall for three days!
-
Click on the layer behind a transparency mask
Is this possible to do?
The mask is laid out in front of the layer that I want to click.
If the mask is a symbol, then he's locked in a div. It's somewhat misjudged CSS which is very convenient for the passage of the click event handler in one div to another. (At least it was unknown to me until very recently.)
pointer-events:none;
See
http://StackOverflow.com/questions/3680429/click-through-a-div-to-underlying-elementsfor some conditional expressions of IE. I hope this helps.
-
Someone will see your email Apple ID if you FaceTime them?
I was in the shower and after that I was through, I received notifications in the phone that someone tried to FaceTime audio me three times in the same minute during this period. By mistake I audio FaceTimed their return, after touching their number out of curiosity, due to the fact that it was a local number in the city where I live. In any case, I never use FaceTime and don't know much. However, I was in settings and noticed that, under FaceTime, he said: your phone number and/or e-mail address will be shared with the people you call. Under the CALLER ID only my phone number has been verified. However, as YOU CAN BE MET BY FACETIME to, my phone and e-mail have been verified. My question is has this person able to see my Apple ID address by email, or all simply my phone number? I don't know there is not much to worry, I still would prefer not to give my email however addresses. Also, it's probably completely independent, but shortly after those calls I had problems with Safari gel in Google, then my icon of location services turned solid for one short moment, although I put sites Web Safari never use my location. Sorry, I just thought I'd throw that with my question to see if someone wanted, or that he had all the answers to this. Sorry for the paranoid of poll, I just take my information, including my email more seriously that I probably should. Thanks to a bouquet.
According to the face that you use for outgoing calls will be visible to anyone call you (check the settings app > FaceTime > CALLER ID to what you have selected, you can only select a single address for this; are is not the same thing that YOU CAN BE REACHED at).
Regarding the gel Safari, there is no reason to believe what is bound.
Maybe you are looking for
-
Need help to install my recovery CD!
I have a screen that says:Not found boot devicePlease install an operating system on your hard drive.Hard drive (3F0)F2 System DiagnosticsFor more information, please visit: www.hp.com/go/techcenter/startupIt has developed and I replaced my drive har
-
I bought my laptop 3 years back, and now all of a sudden when I start my laptop, I get a message saying my windows vista is not genuine. It gives me an option to authenticate later me sign in my computer with limited access. However I get a message
-
Can you DVD to Flash drive to install
I need to download Windows 7 on a USB key or external hard drive to install it in a small pc that I have has no DVD tray. Before buying I need to know if this is possible or is it it guarantees against this procedure. I don't trust online downloads u
-
Hello I'm reposting this thread, sorry for that. Is it possible to operate the access remote vpn for users at the metro ethernet, as users connect to headquarters using vpn for remote access via metro ethernet link. This metro ethernet link connects
-
I get "Installation Failed"@ !