Select all audio in the composition?

Similar Questions

• How to make all audio at the same level?

  I have a sequence of many clips in first pro, and I could swear I've heard of a way to make all audio on the same level or db. Is there a way to do this? I have a few clips in the timeline with different levels and should be old enough to go to manually balance their volume.

  There is a way to do what you want, but it must be used with caution.  If you open the Audio Mixer Panel, select mixer of track and the track that your clips are on.  Click on the arrow at the top left of the track work (you may need to do it twice) and and access the small white window that goes down.  (See using Adobe https://helpx.adobe.com/pdf/premiere_pro_reference.pdf page 365 if you have not done this before) In the right side of this window, right-click on one of the spikes back arrow and select Amplitude and Compression and dynamics.

  

  The word dynamic appears in the white window at the top of channel mixer.  Left click on the word dynamic and select Edit.  I pasted below the appropriate settings.

  

  If you are not familiar with Compressor/Limiter, use the parameter above.

  Now read your timeline and listen carefully while I look at the counters this setting should be good for normally recorded material, and I hope that you do have to do something more. If there is still following problems may be necessary. Schedule audio below (2) drag any clip that's too soft.  All that is too strong to do drag on the calendar below that (3). For the dynamic audio editing 2 repeat the process with the effect but change the makeup to 12.00dB.  For editing audio 3 change the makeup to 0dB setting.  It's not perfect, but it should give you a low-tech solution.   I hope this helps.

• Call javascript function when select all is checked the report

  Hi Experts

  Ive a tabular manual from query below

  SELECT Apex_item.checkbox (1, ID, 'onclick = enableButton ()') select, a, b, c of table

  By choosing 1 or more checkbox individually, enableButton() is called, and works very well as expected

  However when select all is done, I do not know how to call the same function

  Position of column select is: < input type = "checkbox" onclick = "$f_CheckFirstColumn (this)" / > (topic is a checkbox, check, selects all rows in the report) "

  I tried: < input type = "checkbox" onclick = "$f_CheckFirstColumn (this)" onclick = "javascritp:enableButton(); "/ >. It does not help

  Is it possible to call the function when select all is checked?

  Thank you

  Archana

  I changed the title of the

  This solved my problem.

  Thank you

• I want just a bunch of random numbers (about 120 of them) from the list, select 'all' and get the computer to rearrange in CNC

  I try both notepad and wordpad. I'm in Winows XP 2003.  I want just a bunch of random numbers (about 120 of them) from the list, select "all" and reorganize in order digital computer. I can't understand how I've done it before. Google says select the balls feature, but all that is put a point in front of a certain number. There is no arrow down to select. No A - Z. No 1,2,3. what Miss me? is the Notepad or wordpad not the place to do that?

  Use Excel.

• Select all to delete the email

  How do I "select all" delete several emails?

  At this point, you can't.  K-9 Mail is an application that is in beta version that says he will be able, but it says in the description of this application that you should not run it constantly due to problems with her right now.  Sometimes in a near future we should have hopefully an application with this feature.

• Select all objects with the same style of object?

  I did some research but empty is come. It is possible to select all the objects on a page that have the same style of applied object?

  What I want to do, is apply an action 'frame content' to a large group of text boxes (labels on a map). But this mounting option doesn't seem to be available as part of the style of the object.

  Any suggestions?

  Thank you.

  Try using the option Auto-size text block rather in the style of the object. This feature (found in the object > text frame Options) is useful to the legends of autosize following certain rules.

  This attribute can be used in object styles.

• Select all content in the indesign document to attach the script

  I have a script that does something useful for my document. But he always need chose the part of the document, as

  If (app.selection.length > 0)...

  Could you ask me how to select all the pages in the indesign document. I have a lot of pages. And I have a lot of files .indd
  I tried to use app.activeDocument.pages.item (0) .allPageItems; but it is not the effect of page = ( )

  Maybe I can use loop 'for', but perhaps there is a function of selection of all the document, is not only one page

  Thank you

  Of course:

  myPages = app.activeDocument.pages.everyItem () .getElements (); Table of references to the pages of the document

  for (var k = myPages.length - 1; k > = 0; k-) {}

  myPages [k] .allPageItems = myItems;

  for (var j = myItems.length - 1; j > = 0; j-) {}

  processItem (myItems [j]);

  }

  }

  It treats everything from BACK to front, which is usually the security approach and is potentially a bit faster that the other direction.

  You must always write the processItem function.

  Dave

• How, in Illustrator CS5, select all objects with the three points (or nodes)?

  I'm fairly new to Illustrator, but it seems like it should be simple.  (It's trivial in CorelDraw X 4: after selecting an object with three knots, I go to Edition > search and replace > find objects > find objects that correspond to the currently selected object and navigate the menus left.)

  In Illustrator CS5, select options > identical do not seem to include the selection of all objects with the same number of nodes under the currently selected object.

  A double click on the magic wand tool also does not provide such an option.

  Thanks for any help.

  PS also useful would be knowing how to add other criteria to this search, for example, how to select all objects with three points * and * the current fill color.

  advictoriam,

  I'm afraid that you have better luck with the number of anchor Point.

• Select all objects in the active work plan

  Hello

  I want to select all objects in terms of active work using javascript

  someone help me please with script

  Thank you

  APPU

  JavaScript is case-sensitive, activedocument is not the same thing as activeDocument

  change

  var doc = app.activedocument;
  

  TO

  var doc = app.activeDocument;
  

  You can't use the methods themselves, must qualify the first object

  change

  selectObjectsOnActiveArtboard();
  

  TO

  doc.selectObjectsOnActiveArtboard();
  

  You should start by reading The Intro from Adobe to the script and practice according to the samples presented, then continue with Illustrator Scripting Guide and the Reference of Scripting in Illustrator

• Lost all audio on the month or two there.

  On------.

  About a month or two before, for some reason, one day, all of a sudden I had no Audio whatsoever.  When I go to YouTube I get lists and can click on any video, the video comes and plays - but no sound!  I got the advice of onliners who know a LOT more about computers, I also tried my server (comcast) & never get direct responses (windows), if they respond at all (also use excuse that it is not on their end maybe try Dell, windows or Comcast) frankly, you're my last choice because I sent a couple of times and never had ANY response (s).  I hope that this time will be different.  It's no fun to have all these videos & not being not able to hear the songs their mouths are turning to.                        Thanking you in advance!    Patti T

  You get any audio at all - like the normal Windows and beeping sounds?  Which would decrease the chances that the problem is related to hardware (which could be like things).  Do you have a Dell?  If Yes, you can have a program included diagnosis (mine is activated by pressing F12 immediately after pressing the power on button) - and which allows to test the audio hardware (at least partially).  Another thing you can try is to download the drivers for sound card latest (compatible with your version of Vista) on the website of Dell (or the web site of the manufacturer of the card) and install it to replace what you use right now.  Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If this does not work, please transfer your question in music and its Forum: http://social.answers.microsoft.com/Forums/en-US/vistamedia/threads where people who specialize in audio issues will be more than happy to help you with your problem.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Select all checkboxes in the column of the table during the 11 G radio button click

  Hello
  
  I have a table where I inserted a checkbox in the column of the table. I have two outside this table option button, Yes and no. When I select the option button Yes all the boxes in the table to spread and when I select any option button all the boxes should get deselected. As the boxes are inside the columns of the table, we can use setSelected(). How to do this please give ideas.
  
  
  
  Thank you.

  Hi, Maxim,.

  Is your table based on a view object or some bean code?
  If it is based on the view object, the column Boolean checkbox is bound to some transient attribute?

  Have you tried view iteration object rows (if your table bound to viewobject) /POJO(if created list of pojo instances in bean and bound to table) and by setting the Boolean attribute related to the box to true/false on valueChangeListener option button?

  Can you post an example of code to get an idea of your problem?

  Jean Lou

  Published by: Israel Jean Lou on October 24, 2009 04:50

• IFF select all lines satisfy the condition

  Hello
  
  I am not able to understand how to go about this requirement of mine. I use APEX 3.1.
  
  I have a table of expiration dates. I want to select only the company_id, all with dates were expired (to_date(sysdate,'DD-MON-YY') < = to_date(expiration_date,'DD-MON-YY').)
  
  Table:
  
  table_id | COMPANY_ID | correspondents
  
  1. 2. 10 APRIL 09
  2. 3. 10 APRIL 09
  3. 2. AUGUST 10, 10
  4. 1. 10 APRIL 09
  5. 1. 10 APRIL 09
  
  power required:
  table_id | COMPANY_ID
  2. 3
  4. 1
  4. 1
  
  Thank you
  Monpetit
  
  Published by: user11267485 on August 18, 2009 11:31
  
  Published by: user11267485 on August 18, 2009 11:32

  Frank & I posted two queries return the expected results for the data set, that you posted.

  SQL> ed
  Wrote file afiedt.buf
  
    1   with x as (
    2     select 2 table_id, 2 company_id, date '2009-04-10' exp_date from dual
    3     union all
    4     select 1226, 2, date '2010-08-06' from dual
    5     union all
    6     select 1265, 1348, date '2009-04-09' from dual
    7     union all
    8     select 1266, 1348, date '2009-04-09' from dual
    9   )
   10   select table_id, company_id
   11     from (select table_id,
   12                  company_id,
   13                  max( exp_date ) over (partition by company_id) last_exp_dat
  e
   14             from x)
   15*   where last_exp_date < sysdate
  SQL> /
  
    TABLE_ID COMPANY_ID
  ---------- ----------
        1265       1348
        1266       1348
  

  Are you sure that the data in your table are all of the years 2009 and 2010? You post only here two-digit year. I bet if you look at the full 4-digit year that you will eventually discover that TABLE_ID 1226 has an expiration date of August 6, 0010, i.e. approximately 1999 years.

  Justin

• In labview so I select all items in the drop-down list, the corresponding elements of the need to change page

  as an example of

  If I select the first item - drop-down box, in the page it should only show digital controls 1 and 2

  If I select the second element - drop-down box, in the page it should show only digital commands 3 and 4

  If I select the third element - drop-down box, in the page it should only show digital controls 5 and 6

  because i really new for the labview.

  None of the answers thank you.

  There you go

• Since the installation of the last Photoshop CC updated two days ago, Auto Blend to focus stacking is to select all pixels of the background layer instead of those of the better development of each layer. Also has anyone seen this problem?

  I installed the latest update of Photoshop CC on my Macbook Pro two days ago, and now when I try to focus stacking by opening several photos and make Auto Align and Auto mix, mixture selects the entire background layer instead of select areas of the development of each layer. I tried again on a series of images where it worked a week ago, and the problem occurs. I have Photoshop on a Windows 8 machine and did not apply this last update and it works fine. If anyone else has experienced this?

  And we now have the new version!  2014.2 is out and it's fine to focus stacking and Photomerge.

  -Christmas

• Select all the script maps

  Hi all

  Hoping someone out there can help, I need my script to end with one of the following 3 options:

  Select all: as in "cmd one"

  Select all the objects on the layer "Tabs".

  Select all the objects with the Script title boxes"tabs".

  Reason being, when the script ends I need a bunch of boxes to be pre-selected loan for a manual deselect by 1 point (chosen by the user) and then they Deletes selected objects manually to finish. (I didn't understand my original script here as has no impact on the autonomous part I need for the final selection)

  Hoping that this is a simple script but as it is rare to have a script of object selection and not do something with them, I think it's impossible to create.

  Thank you, Bren

  Read the object model and you will find that the equivalent script Cmnd + A is as follows:

  app.selection = null;
  pItems = app.windows[0].activeSpread.pageItems;
  app.select (pItems, SelectionOptions.ADD_TO);
  

  To select all items in the layer tab page, filter the items in the page:

  app.selection = null;
  pItems = app.windows[0].activeSpread.pageItems;
  
  for (i = pItems.length-1; i >= 0; i--) {
    if (pItems[i].itemLayer.name === 'Tab') {
      app.select (pItems[i], SelectionOptions.ADD_TO);
    }
  }
  

  To select objects with a certain script label is a variant of the (or an addition to) the second script.

  Peter