SELECT and mask question

Similar Questions

• Select and mask | Problems with the selection in the process of disappearance - CC 2015.5

  Hi all!

  I've just updated Photoshop 2015.5 CC version.

  I am currently working on a design that needs cutting contours.

  So I picked all the areas belonging to the background of the image and then click on the "select and mask" to refine the edges and then clear my selection as I usually did.

  But instead, my selection disappeared...

  My steps were:

  1. Selection of the areas to clear with "themagic wand tool.
  2. Click on 'select and mask' (output parameters: output to the selection).
  3. Click on 'OK'.
  4. Selection has disappeared!

  I have provided all the tools to their default settings, but nothing has changed.

  I tried to close and reopen the case, repeat the steps to delete the background, but I always feel the question.

  It is a big problem for me!

  I hope that there is someone who could help me/us with this!

  Best,

  Joanna

  I actually asked the new workspace me first thing after update, because I wasn't getting.  It's different enough that you need to learn everywhere, I'm afraid, but it is definitely an improvement when you become familiar with it.  See Julianne Kost guide below, but I suspect that you may need to adjust the sliders that control the opacity of the background.  Or simply click on the transparent part to start the selection.

  

  Select and mask "Julieanne Kost's Blog

• SELECT and mask shows lines on the screen

  When I select select and mask and is a refine edges it shows lines on the screen, any ideas why?

  Not turning off"use graphics processor" in the Performance preference and restarting Photoshop have a bearing on the issue.

• Using refine edge (or select and mask) only on a part of an existing mask

  Is it possible to use refine edge (or select & mask) only on a part of a mask to avoid mess with what is already ready to go? (which to choose and mask tends to often especially when you use the brush, then the border brush refine for example).

  Kinda like the gel with fluidity tool or masking of the areas you want to not use when using content aware.

  Thank you.

  PS: I would like to be able to do it directly on the mask, I train without having to store selections as a channel. This is because it is not convenient when you want to do a lot of time on complex selections.

  I don't know of any provision aimed at limiting (gel) edge tool refine in some and mask - sounds like a great idea to raise here:
  https://feedback.Photoshop.com/photoshop_family

  However, I used workaround, to refine part of the mask, that doesn't involve not only save as channels and takes longer to describe than to do:

  1. prepare your initial mask and save with the layer.
  2 click once on this mask
  3. use the lasso tool to draw around the area you want to change (refine)
  4. make a right click the mask and click "Intersect with selection".
  5. fill in the new selection with black (on the layer mask)
  6. now double-click the mask to open it, select and mask. You will notice that only the area you want to refine is indicated.
  7 tools to refine this area of your mask
  8. Once done select "output to selection", and then click OK
  9. make sure that the mask is highlighted, and then fill the selection refined with White - this puts a new version of the section that you filled with black previously.

  Dave

• Refine edge in Select and mask

  I am not able to use tools refine in "select and mask" correctly. Rather than refine edges, it removes even the selection. I need some advice on her please. I use Macbook pro and Photoshop cc 2015.5.1.

  A conversation around to refine edge tool vs select and mask is also going on here, with a great new video of Conrad that most users of the tool Selection and mask must look to better refine their use of different brushes: Re: PS 2015.5 - tool refine edge? Missing?

  Feel free to continue the conversation.

  Concerning

  Pete

• Select and mask

  I tried to change the color of the floor, so I tried "select and mask ' to highlight only the word, I wanted to work on... and then I got lost!... can someone tell me the procedure how to change the color of something after using select and mask?

  Any help would be great.

  When you are finished with the selection just click on the OK button in the properties panel on the right side of your screen. Selection will be loaded and you can create new settings such as Hue/Saturation layer using the selection for the adjustment layer mask.

• Selection and masks:

  Selection and masks: Hi, if I want to choose a guided image with selection and masks nieut run my mouse over the action. so I can not I can refine selection lasso-select, but I lose if I released the mouse I have the tools to take back how to solve this Emiel sincerely

  Two thoughts:

  • Start by watching this tutorial on the Select again and the mask: Select and mask in Photoshop CC Taskspace (15.5) "Julieanne Kost's Blog of »
  • Update to the latest version, published this week. There were Select bugs and mask in the original version: Photoshop CC 2015.5.1 update available

• Select and mask is not an option

  Hello everyone. I have a problem with the new ' select and mask ", it basically does not appear in my Photoshop. I have only the option "refine edge". Someone who can help?

  And Yes, I have the latest version of Photoshop, which should include the tool 'Selection and mask '.

  Hello

  I know you think that you have the latest version, but I don't think you do. Could you go to the Help menu and call information system. In the dialog box, the top line is your installed version. It should read

  Adobe Photoshop Version: 2015.5.0 20160603.r.88 2016/06 / 03:23:00:00 CL 1078833 x 64

  If your copy is the same so you have a corrupt installation, but I suspect it will say 2015.2.1 or an earlier version. Irronically if you managed to get 2015.5.0 to improve the contour rather than select and mask, then a lot of people here would like to know how you did it S & M is not universally popular

• SELECT and mask of pixelation/staircasing

  When I refine a mask using smart RADIUS, close the window "select and mask" then return to refine once again, at the point where I use the brush refine edge it tool rasterizes the edges of the mask where it was previously smooth. Why is this happening?

  

  In addition, while I am using the Brush tool refine edge, the whole picture becomes blurred and pixelated makes it difficult to see where I paint.

  

  The old edge tool refine had no these problems, well that simplest, it was more robust than that.

  Show original Brigitte as this seems to be a new problem and it will help if we can reproduce it. You get a progression model sometimes with JPEG files as the tool resumes the compression checkerboard pattern, but you seem to use psd? Your Mac and you can't trust the drivers of graphics cards unfortunately more, but I do not conclude that, right now, with this tool, they are certainly has problems with that affects other people.

• The new tool Selection and mask hatred!

  Get rid of the tool refine edge is probably the largest in the history of the Socialist Party. I like this tool and use constantly to get my masks just as it should. Select new and mask the tool only works on layers pixelated. I understand that for the detection/RADIUS tool to work correctly the mask must be on a pixel layer. However, this tool is not all that refine edge offers! The smooth, feather, contrast and update tools are extremely powerful, as well as quick and easy access, when you work with masks on adjustment layers. My quick shortcut to refine the edge is no longer works. I have to drag the mask to a layer pixel or find other ways to adapt. None is as effective as a fast/command R option and typing in my settings that I tab by refinements. I am EXTREMELY frustrated and disappointed. Does anyone know of any workaround solutions to return refine edge? Help, please!

  I thank everyone for your comments here, we are actively looking for the behaviors described. If you have files that you can send us where you see a significant deterioration in output using select and mask, we want these files. They will help us identify specific problems in the flow of work and with the underlying algorithm.

  One of the behaviors described in this thread is that select and mask only works on a pixel layer. It is a bug (we have a difficulty, that we are working on) and in the meantime, a workaround is available by double clicking on the mask to enter the select space and no mask on layers of pixels.

  We are looking for also actively to the performance of the brush edge refine subtract - please stay tuned for updates over here that we are building a case to identify exactly what might be the underlying problem.

  This is the first version of Select and mask, but we have on our backlog of adding other tools in this space in order to allow a greater number of workflow. More to come here.

• Refine the tool missing - select and mask does not work on hair

  I also do not know how to use this tool. I need to select the edges of the hair and used the brush once I was inside the dialog box refine edge. This allowed me to use the brush on the edges of the hair, and he would choose loose bristles. Now select the and mask feature selects a large part of color that is affected by the brush and does not select just the strands. So I find myself with a person's head and a blob of 3 inches from the bottom red on each side of the head, because it acts as the tool magic wand or quick selection instead.

  How to make a selection with the lasso tool, then refine the edge and select the hair? I often hear to use the pen tool, but who's transformed into a selection eventually anyway. Is not wise to make a selection tool feather each and every time you want to select the hair - I make a selection of the entire body of the person and what part of it can refine the edge. Totally lost on how to select just the hair strands and refine the edge.

  Hello

  See this post: refine edge is back

  Stone

• Newbie on selection and weight question

  Hi all

  I'm new here and for Illustrator.

  I was not using Illustrator for a long time and especially as a go between SketchUp, fom where I export files EPS and Photoshop, where I can easily paste their pie until my heart as dynamic objects and then.

  In Illustrator, clean the drawing before Pshop, removal of unnecessary lines that clutter the plan or section, no correction of errors I task etc.

  One thing I want to do is to select individual lines (paths?) and change line thickness; for the moment, when I select one and change its weight, it also changes a lot of random others in the drawing that obviously the program considers somehow related, but that shouldn't really be. I ended up deleting the line and he redrawing in the correct weight, which wastes a lot of time.

  Is there a way to "blow up" (for lack of a better term) the drawing so that the lines are not connected more?

  Thank you

  ALWAYS indicate what version of the AI that you use.

  Whenever making selections, always pay attention to this kind of object is selected. According to the version, which will help you understand what is happening in this little intuitive interface.

  Maintain the visible appearance palette. Select one of the paths to change. Recent versions can present 'A composite path' object type. If you understand what is a composite track, which alone will tell you why to change the weight of the race of the chosen path also changes others.

  Whenever it comes to vector graphics imported from other programs (including other programs owned by Adobe), you may encouter these constructions: groups, composed of railways, the clipping mask. Groups and the clipping mask can even be nested. Application (often repeated application) disassociate, object > CompoundPath > Release and object > ClippingMask > commnands communicated frequently need to 'split' these buildings down to individual objects of cowards.

  You should probably spend some time in the documentation.

  JET

• OPTION + SHIFT + BRUSH works incorrectly in Select and mask pane

  SHIFT + BRUSH works as expected to add to the selection between two points, but OPTION + SHIFT + BRUSH also adds to the selection rather than deselect them

  OK, I get it... and no I can't find a combination of keys or buttons on the Options bar that makes you want. You can put this list of feature here: https://feedback.photoshop.com/photoshop_family/categories/photoshop_family_photoshop?topi c-list [Settings] [type] = problem.

• Select and artifacts of mask using the new refine edge

  Hi all

  is - that someone else has had this problem since the last update version 2015.5.0 Photoshop?

  I find strange artifacts when using select and mask and the new brush refine edge that would not happen in the old refine edge.

  The Alpha channel looks good but the image shows of strange artifacts and blurry tasks and resembling traces of brush end hard.

  I took the time to correct my mask in order to remove any traces of brush hard edge, but they seams to still be there. I find it very frustrating.

  

  Hmmm... think I just found the answer to my question. I got the color box to decontaminate tiquetee.

  I have hidden without this box and the blur and artifacts disappeared. My recommendation for anyone making high range of editing and masking is to leave this box unchecked.

• Select and apply the mask

  Hello!

  I upgraded to the PS 2015.5 version and not the herramineta appears "perfect edge " appears instead " select and apply mask " . In this new space I can not use any of the tools panel on the left (fast selection tool , brush, etc. ) . 
  
  What may be because the problem ?? 
  
  Thanks in advance

  Hi axe_juan,

  Selection and masking of space replaced him refine edge - more information about it here: selection and masking part of a photo. Tutorials Photoshop Adobe CC

  You are looking for, or can you elaborate a bit more on what your question is?

  Concerning

  Pete