SELECT options (multiple), ignoring the selected attribute

Similar Questions

• How to make a transformative effect ignore the line attributes?

  Hi all

  I am intermediate (at best) with Illustrator. I use CS6 on an iMac 2009.

  Could someone advise me on how to make Illustrator ignore STROKE weight/CAP/join parameters when I apply a live effect make rotate/multiple copy on a group of paths? Currently, Illustrator defines the rotation point to the extreme point of my stroke (contained in the atrributes of traits), but I want only to calculate the track structure: the coordinates of my anchor point designated.

  

  Here are the top/right of paths with a rotation Group / 3 copies effect of 90 degrees. This view looks without problem.

  

  This band of the top/right of the railways with the addition of a reflection / 1 copy effect of the x-axis. Still no apparent problem.

  

  But this is a close to the alignment of the corner points. As shown, the transformation indeed is based on attributes of the strokes (the tip of his corner), not the actual location of the corner point.

  It does not help to apply styles different heading a corner or race alignments; that only slightly Wizz the pivot point to the Center.

  In addition, this race of a point is somewhat arbitrary. I only put it so in order to see my dynamic effects.

  Refine vertical and horizontal effects of the elements turned/copied movements won't help because this art will subsequently undergo a lot of alteration, changing money, especially in the weight of the stroke (thickness of the line maybe same variable).

  I need the skeleton of the struct to snap together precisely.

  Any solution, regardless of how roundabout, would save this project! I'd appreciate some advice.

  Assuming that you did clean:

  1. check the order of the effects and strokes: this is important if you first apply the effect, then the stroke or vice versa

  2. check that "Snap to grid of pixels" is turned on

• CS5 - data merge - create merged Document - record Multiple - ignore the title / other objects on the page?

  When I create a document merged with multiple records, items are usually right, but the problem is the title or header of the page is usually also replicated in each line.

  Anyway is to separate certain objects/images/text/etc so that when I create the merged document (multiple records), he would not repeated those elements?

  This tutorial can make:

  http://TV.Adobe.com/watch/instant-InDesign/automating-a-catalog-with-data-merge/

  But does not explain how he keeps the title, separation points, etc., to reproduce with the fusion of data.

  Thanks for any input

  You have the objects you don't want a copy of the master page?

• Ignore the ASO - zero data loads and missing values

  Hello

  There is an option that ignores the zero values & the missing values in the dialog box when loading data in cube ASO interactively via EAS.

  Y at - it an option to specify the same in the MAXL Import data command? I couldn't find a technical reference.

  I have 12 months in the columns in the data flow. At least 1/4 of my data is zeros. Ignoring zeros keeps the size of the cube small and faster.

  We are on 11.1.2.2.

  Appreciate your thoughts.

  Thank you

  Ethan.

  The thing is that it's hidden in the command Alter Database (Aggregate Storage) , when you create the data loading buffer.  If you are not sure what a buffer for loading data, see loading data using pads.

• change the value of the location attribute in db jca file with the configuration file

  Hello

  How can I change the value of attribute of 'place' in the jca adapter db file by using the configuration level if possible?

  I have the database map file where the first two lines are:

  < name of the adapter-config = "getParty" = 'Database adapter' adapter wsdlLocation = "getParty.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/CRP1"UIConnectionName ="crp1_apps"adapterRef =" "/ >

  ...

  I need to replace the configuration file

  EIS/DB/CRP1

  with

  EIS/DB/DEV

  but this isn't the case. I think that I am not referencing correctly but I don't know how he is correct, that I couldn't find examples for composites and wsdl content, JCA file.

  Please share the idea.

  Thank you

  Anatoliy

  Anatolly salvation,

  You can assign a new value to the property of JCA by using either the Ombudsman as BPEL.

  Pick click entitled value option and add the right attribute to the property JCA jca.db.DataSourceName.

  In BPEL will zoom click the invoke for the DB adapter, go to the Properties tab and add the right attribute to the property JCA jca.db.DataSourceName.

  (edit)

  If you want to use a configuration file to set the value, I suggest a BPEL property, the value can be replaced by using a configuration file and can be assigned to the JCA property using ora: getPreference ("prefName as string");

  When you use a mediator does not have a preference, and you can use a placeholder that you change when you compile the SCA composite. With ANT in combination with hudson, you can easily replace the value (hard) by the environment.

  See you soon,.

  Robert van Molken

  Specialist of the integration of Oracle

  Post edited by: robertvm

• When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

  Error image system original title: windows 7 0 x 81000036

  I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

  I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

  any ideas?

  Hello

  ·         You have created a system image backup before that?

  ·         You did it changes on your computer?

  ·         Is your esata formatted NTFS drive?

  Try to save the image of the boot system: http://support.microsoft.com/kb/929135

  Note: make sure that you start the computer in normal mode after a repair.

  See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

• The selected languagen, no options to change the settings.

  The language selection, I never failed to change, order parameters, CC, change languages, will not work with Adobe Bridge and Adobe Photoshop CC CC. If the order is delivered (Finland, so automatically the default language the same?)

  In particular, the bridge / application Camera Raw, no options to change the settings.

  Is he only way to buy a new order?

  I'm used to using the English version

  Cloud of swap language http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html

• Is there a no work around to self-selecting shipping options by entering the zip/postal code?

  Is there a no work around to self-selecting shipping options by entering the zip/postal code? Because currently, yet the user must select the delivery option (radio button type).

  Yes, but its coding custom in conjunction with a 3rd party to search for postal code. You also manage the boring dom manipulation that BC with its code on things like the fields of code reduction, changes etc. making your shipping option code. You really need to have a good understanding of encoding AND British Colombia in this case unfortunately.

  Possible, but if you do not want to pay so that it can be done or not be able to do it yourself - Best to avoid it, if you can on the project.

• Clone of the drive selected only--ignore the independent record

  I have a virtual machine with two drives.  the first disk contains the operating system and is a standard virtual disk.  The second disc is independent - persistent.  I want hot Clone ONLY the OS disk and ignore the independent drive.  I have a Powershell script that will clone a virtual machine, but I need to know how to jump the independent drive.

  It seems that it is possible to copy a vmdk selected a virtual computer on the ground, but I need to be able to make a clone of hot.  Is this possible via Powershell?

  Here is the code for the loop. Replace # DO comment on the line and everything up to the # clean comment by the following

  ## DO IT -- NOTE that CopyVirtualDisk_Task is 'experimental' as of vSphere 4.0 GA        $taskMoRef = $vdiskMgr.CopyVirtualDisk_Task($sourceDS, $sourceDC, $destDS, $destDC, $destSpec, $force)
          $task = Get-View $taskMoRef        $info = get-task | where {$_.id -like "*-"+$task.info.key}
          while ($task.Info.State -eq "running" -or $task.Info.State -eq "queued") {
              sleep 10            $info = get-task | where {$_.id -like "*-"+$task.info.key}
              $task = Get-View $taskMoRef            Write-Host "Task" $task.info.state "," $info.percentcomplete "% complete."        }
      }
  }
  

• Is it Possible to ignore the prompt from the view of the customer for the selection of pool?

  Customer view has the serverURL - and command line parameters - desktopName that work well to specify the Server View Manager or Office to connect to in a one to one relationship but I would ignore the selection of pool as well. I have thin client Labs in our school libraries that use a pool View. I want to clarify the pool when the user clicks on the icon view rather than motivates students to choose the correct pool in the list. I know I can limit the pools shown to students in making our more granular ad groups and allowing only the groups we want to using each pool, but when you have 16 schools, K - 12 classes and thousands of potential users it becomes a management nightmare. It would be much easier to choose the correct pool for them.

  One of the ways I've found to make a direct link with the desktopName - but if we do lose us the benefits of the management of the pools.

  Any help is very appreciated,

  Thank you

  Ty

  Yes! I tested it: you choose the display name that appears in the list on the client from the view.

• Y at - it all in option built in the apex to select the download icon...

  Hello
  
  While we try download the report file region where the format will be in the form of table.
  In this sceneria, we have two columns ID, name...
  We want an icon instead of a link...
  Y at - it all in option built in the apex to select the download icon...
  
  David...

  Hi David,

  I'm glad to hear that!

  As long as you have some other questions about downloads of files, can report you a message as useful or Correct, then mark this thread as a response.

  Thank you

  Andy

• Make a right-click the star to an already referenced site does NOT have the option to edit the bookmark to a selected location as described in Helpl

  The option to edit the bookmarks is absent from my current version 29.0.1. Right-click the star
  produces a menu but not one described in help.

  Go to the Menu
  Remove from the toolbar
  Menu bar
  Bookmarks Toolbar
  Customize

  This question was on by clicking on the star in the Navigation toolbar to edit the bookmark.
  The button star highlight to edit the bookmark because right click opens the context menu of the toolbar, you must left click.

  You can right click on a bookmark in other places such as the bookmarks toolbar or in the sidebar and in the bookmarks (library) Manager to change the properties.

• Option ignore the prompt

  Hello
  
  I've set up a quick dashboard query input values, the filter in the report criteria is less to:
  
  "Analysis '." (Start date' > = Evaluate('to_date(%1,%2)','@{startdate}','DD/MM/YYYY')
  AND "analysis". ("" End date "< = Evaluate('to_date(%1,%2)','@{enddate}','DD/MM/YYYY')
  AND 'account Flexfield '. The company between ' @{companyS}' and ' @{focus}'
  AND 'account Flexfield '. "Between ' @{account}' and ' @{accountE}"
  AND "Flexfield. "" Cost center "between" @{costcentreS}' and ' @{costcentreE} "
  AND 'account Flexfield '. Product BETWEEN ' @{products}' AND ' @{frozen}'-SKIP
  AND 'account Flexfield '. Sector BETWEEN ' @{sectors}' AND ' @{located}'-SKIP
  AND "Flexfield. "" Business Unit "BETWEEN" @{businessunitS}' AND ' @{businessunitE}'-SKIP "
  AND 'account Flexfield '. Project BETWEEN ' @{project}' AND ' @{projectE}'-SKIP
  AND 'account Flexfield '. Alternative BETWEEN ' @{spare}' AND ' @{spareE}'-SKIP
  
  I would like to have the ability to ignore certain parameters, as shown above, how is this possible?
  
  Can anyone help?
  
  Thank you

  Hi sliderules,.

  I would like to have the ability to ignore certain parameters, as shown above, how is this possible?

  You can't ignore the filter conditions once you have set up, if you want to ignore those specific, you must remove them and run with other remaining filters.

  Why you want to skip them can you explain what you're trying to achieve?

  UPDATE POST

  First of all don't be confused with prompts and filters... here the filters are applied for example where of the SQL clause conditions... where as guest is effective for the whole of the report that is global.
  In your question, confuse you me... which sentence on filters... Now saying your user name should enter 3 guests and leave aside to invite others... so it is connected to the dashboard of the guests

  come to the dashboard command prompt to jump... Enter guest of dashboard which must be registered and say end-user that the first 3 guests are binding leaves the rest... but see the first 3 guests are defined is requested in the filter criteria (for example:-accounts is invited)

  Check this example http://bischool.wordpress.com/2009/08/26/avoid-running-report-for-all-values-on-dashboard-when-using-multi-select-prompt/

  See you soon,.
  KK

  Published by: Jocelyn on January 28, 2011 09:16

• Ignore the validation of attribute in adf levels

  Hello, I use JDeveloper 12.1.3.

  I have a simple question.

  How to ignore the validation of the attribute levels in the adf, when I pass between tabs?

  I can't use immediate = true, because then I wouldn't be able to commit the changes.

  Thank you all.

  Concerning

  You can try to make the the showRequired = true required = false and carry them out manually, validation in your beans for each of the fields that you want to be mandatory.

  I had a problem similar to yours. I think (and I said) that it is not a good practice for autoSubmit = "true" in many areas. You even not the disadvantage that if you try to change the fields too fast that they be emptied... As well, the view is suspended for a second while submitting. This should be a no-no for forms with several fields.

• Two local options while substituting the attributes in vROPS

  What is the difference between these two premises, one who is with the green check mark and the other with the Red Cross in vROPS options?

  

  The Red Cross turns and the green check mark allows the attribute (the metric is not collected).