Two local options while substituting the attributes in vROPS

What is the difference between these two premises, one who is with the green check mark and the other with the Red Cross in vROPS options?

The Red Cross turns and the green check mark allows the attribute (the metric is not collected).

Tags: VMware

Similar Questions

battery patches option while using the VI express acquire

Hello

I have my daq, NI USB-6009 acquire a current analog signal of input ai0 and acquire an analog input voltage using ai2. These signals is acquired at the same time in a task using the daq assistant express vi. The data are connected to a waveform chart that is seen by the user on the front panel. When I start the program, the program works well, however the waveform and the voltage wave are superimposed on a single diagram.

I want to show the signal from analog voltage and current analog signal separately on two separate parcels. However, when I right click on the graph of the waveform on the front panel and choose the menu option, the "stack slots", nothing happens. The plot does not crack.

Help, please

Thank you

Mary

Hi Mary,

Have you tried to expand the legend of field in the upper right of the map of waveform? The following knowledge base article contains measures for the display of multiple locations as individual screens.

http://digital.NI.com/public.nsf/allkb/21E8163F259DA2058625703B007511AA?OpenDocument

Can I control the activity of the two loops independently while in the same vi?

I would like to run two generators of random numbers (RNG) in the same vi. The first GNA go all the time that the vi is running. But I would like to be able to control the second RNG (turn on and off at will). I consider start and stop buttons wired for the while loop to control the GNA. I tried a few different configurations but none work so far. I have included a simple vi with the start and stop buttons. I don't know how to reach my goal with them. Thanks for your help.

Like this:

You forgot to attach your vi. You don't need two while loops.

Only local access while using the USB modem

Hi, I have a laptop dell inspiron with Vista home premium preinstalled in it. For about 3 years I use GPRS (internet) with modem USB on it without problem. It was working fine but application stopped working 15 days before. I tired every thing from different forums but the only "Local access" message is fix... now, after trying a lot of different things I get of the internet world for 5 minutes but it goes to new local only access. But within 5 minutes no Web site is too load. I have no problem with my connection to the LAN and wireless. They both work fine(I hv tested). Its only for my nokia usb modem. I HAV tried to use GPRS to different operators, but it is givin local only access for all, and when consulted internet in all mobile phones are workign fine. I also tried to use microsoft fix but it gave an error file not found and ignored den and ran some checks of registrey and claimed restart. But no change in connectivity.
Help, please.

Hello

· Update you the network card with the latest drivers?

Method 1:

I suggest that you disable Antivirus software and firewall temporarily on your computer and check if you are able to connect.

Note: Please make sure that you enable the antivirus software and firewalls after the test to keep your computer protected.

Method 2:

You can try the manual steps suggested in the following article:

http://support.Microsoft.com/kb/928233

Note: serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry ) how to back up and restore the registry in Windows)

No mask overlay option while using the radial filter

Hi guys and girls, can someone please tell me why don't I have an option to see my decorative mask using the radial filter? It should be next to "see her change pins", right? Have you tried the 'o' key, I use a Mac - in Europe. For sure, it's something obvious ridiculously... See you soon

Try to connect at the back and return to: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

Simulator Device.xml file has a tag with an attribute of memory, what are the optional values for this attribute of the os?

In the Device.xml file, it starts with the tags of the os. Each os has a memory attribute. What are the optional values for the attribute memory?

Can we really control the memory for the simulators?
```
0x85000F03
0x8C000F03
0x87000F03
0x84001503
0x86001503
0x04001507
0x0F001507
0x0C001404
0x0D001404
0x0E001404
0x0D000D04
0x16000D04
0x05001504
0x07001504
```
These values refer to specific hardware configurations are simulated. They should not be changed.

Substitute label attribute values?

Hello!
I want to replace the default values to view label attribute and replace them with the translations that I receive a database table.
I made custom classes TranslateViewDefImpl (overloaded function "getAttributeDefImpls"), which extends ViewDefImpl, TranslateViewObjectImpl ("getViewAttributeDefImpls" overloaded) extends from ViewObjectImpl, TranslateViewRowImpl ('createViewRowAttrHints' after this overloaded post) extends from ViewRowImpl where I try to substitute the attribute definitions.
I used "setProperty" method on the definition of attribute to set the "AttributeHints.ATTRIBUTE_LABEL" and at first, everything seemed fine - the right of the attribute translation appeared. But the problem is when you have two or more clients with different locale by using the same page. In case of replacement methods using '(AttributeHints.ATTRIBUTE_LABEL, labelTranslation) adi.setProperty', label prepares for the right customer (a) local translation, but the problem is when another customer B with different regional settings accesses the same page. Initially, he sees the right translations, but when the first customer A refreshes the page, all attribute label translations are wrong locale (using the locale settings of client B). When client A refreshes the new page, labels are still in the local right, but when client B refreshes, it sees translations of customer locale.
It seems that these overloaded classes are all static for the application and when a property is set, all clients use the same property, adi.getProperty (AttributeHints.ATTRIBUTE_LABEL) returns the same value for all clients using the application.
Then I stumbled on this next post. At first, I thought I found the solution, but when I tried this approach, it did not work. This is the code:
```
AttributeDefImpl at = (AttributeDefImpl) vo.getAttributeDef(0);  

     at.setProperty(AttributeDefImpl.ATTRIBUTE_LABEL +"_ResId",   
                    "VEmployees.Id_LABEL");  
  
     at = (AttributeDefImpl) vo.getAttributeDef(1);  
     at.setProperty(AttributeDefImpl.ATTRIBUTE_LABEL +"_ResId",   
                    "VEmployees.LastName_LABEL");  
  
     ViewDefImpl viewDef = (ViewDefImpl) ((ViewObjectImpl) vo).getDef();  
     //Create custom properties bundle definition  
     PropertiesBundleDef rb = new PropertiesBundleDef(viewDef);  
     rb.setPropertiesFile("com.cs.blog.dynamicbundle.model.VEmployeesBundle");  
       
     viewDef.setResourceBundleDef(rb);  
```
I can't find documentation anywhere using '_ResId' with AttributeDefImpl.ATTRIBUTE_LABEL and setting my own resource Pack (which pulls all the translations of a data source). When I use this approach, label attribute values are not changed and have their default value.
Help, please. Is my approach far? How did did you translate see attribute labels using translations of the database?
I use JDevelper 11.1.2.3.0

Marko,

All you need is:

1. your EO to point to a ListResourceBundle class, instead of the boot of property by default, as I described above.

2. each attribute EO have the right name for the label:

<>

Name = "CountryNo".

Precision = "22".

ColumnName = "CountryNo."

SQLType = 'NUMBER '.

Type = "Java.Math.BigDecimal"

ColumnType = 'NUMBER '.

IsPersistent = "false".

IsUpdateable = "false" >

<>

ResId ="COUNTRY_NO_LABEL" / > ".

<>

ResId = "DefaultNumberFormatter_FMT_FORMATTER" / >

<>

ResId = "MASK_NUMBER_1" / >

Here, you will need to COUNTRY_NO_LABEL either a key in your package of dynamic resource.

As for my last comment, I'm just pointing out that if you add your labels through JDeveloper UI (thanks to the tab of the UI data), JDeveloper might try to change your class code ListResource. Is why better do it manually, I think.

Hope this helps,

Florin

How to see the attributes of the ERPI

Hello
I was able to load data using a flat file for an application of planning with ERPI. I have it loaded with the attributes. The attributes are present at ATTR1... 10 columns in the TDATASEG table. But I when I access since the data ERPI landing page form, I don't see the option to display the attributes. I don't see that ' mapping ', 'document Open source' and 'drill at the source. " Something must be enabled?
Kind regards
Brig.

The feature introduced recently in FDMEE 11.1.2.3.510 is not available for previous versions.

Please mark this question as being correct so that others can see.

Concerning

remove the attributes does not
Hello

I'm trying to remove some attributes of entries. However, the format specified to us if an attribute is not present, the entire delete operation fails. I want to make it optional, as if the attribute is filled for a user, delete, or ignore, and move to the next attribute.

#####################################

DN: uid = abc123, or = xxx, or = People, o = example .net
ChangeType: modify
delete: telephoneNumber
-
delete: mail
-
delete: sn
-
delete: givenname
-
delete: objectclass
objectClass: tdsgroup

###########################

Let me know it someone know how to do.

Thank you, John

Published by: user13658628 on February 8, 2011 09:49
If the entry is missing for an attribute, a replacement will be usually work:

DN: uid = scarter, or = People, dc = Example, dc = COM
ChangeType: modify
replace: telephonenumber
-
replace: mail
-
replace: sn
-
...

Although some tools ldapmodify IIRC do not like this format. Alternatively, you can make each change a separate operation, like this:

DN: uid = scarter, or = People, dc = Example, dc = COM
ChangeType: modify
delete: telephonenumber

DN: uid = scarter, or = People, dc = Example, dc = COM
ChangeType: modify
delete: mail

DN: uid = scarter, or = People, dc = Example, dc = COM
ChangeType: modify
delete: sn

...

allowing-c to continue on errors. Who has the disadvantage of leaving you with a bunch of operations failed you can sort (assuming you're be conscientious here) to see if something has no which was not supposed to.

If you remove the attribute sn you might encounter some violations of the pattern if you are using the person as the usual person schema objectclass requires also sn.

Another option is to use a pipeline and an ldif formatting module to ensure the DNs that you operate on have the data expect you.

Its mixed? While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds will play together. How to avoid what is happening?

While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds play together, which is not a good customer experience.
How to avoid what is happening? Placing a marker can help, but cannot solve the problem when the compliant/no intentional user, press tab.

Better, if the presenter can triggle tab automatically at some point, or click interaction, no game bar function.

Hi Louie,

My sincere apologies for not being able to help on your previous question.

Now, that the Interactions are concerned, they were initially designed to be placed as standalone content on the slide.

Also if you try to resize your interaction and place it on the slide as well as other content/objects released published will always give a priority to the Interaction that it deemed to be a specific slide of Interaction.

In the previous project, you shared, you try to time the Interaction with PowerPoint animations and wanted it to appear later on the set of slides, rather than on the start. But, as explained above, presenter honored not this setting in your project, because he in fact has considered a slide of interaction and display interaction since the beginning of the slide room itself.

Also the number listed in this thread is concerned, there is no direct way to do it but I would like to suggest something that might help.

If you want to keep the interaction on your slide and other content, Interaction will be available at the beginning of the slide. Surely there is no way that delaying his appearance, but you can still use animation related to Interaction in another goal. Within your presentation-> playback option settings, you can enable the feature of 'Pause after each animation' (see screenshot below). It will essentially help you achieve the function of auto-faisant a break from your animations, using your narration would automatically stop, just before you claim in your narrative and inform the learner to click on the different tabs of the Interaction. All you have to do is your narration and animation correctly so that the slide play does not break too many times in the time interval. Hope you find the idea of what I'm trying to say.

Please mark this answer as being correct, if you find it useful. We would certainly look at such scenarios to be achievable directly at the request of our updates and later version.

Thank you

Zeeshan Hussain

Adobe Presenter Engineering Team

Disable the download Client Mode Local Option

Is there a way to disable the option to download local mode? In our environment, the customer discovers is not distributed through the web interface often, but it leads to confusion when it is. Can we just remove the option?
Thank you.
Attached a screenshot to show where the confusion occurs.

There is no direct method. I could see two possible options such as

1. you can use a few messages before login

2 change/modify the XHTML and the CSS files on the server

This is not official and also you will lose all settings after the next update/uprgade of view

Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site.

Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site since the update to version 3.6 to 4 RC1.

Gel mouse pointer when it comes across objects that use some sort of animation or gradual highlighting when hovering on (which is basically all the Firefox 4 items menu, tabs, etc.) But also a lot of things on the Web pages as the green buttons on this page that change color when you hover over them).

After rebooting my system, however, the problem seems to have disappeared!

[, WinXP SP3 - 4 GB RAM, Core i5 M520, driver Nvidia NVS3100M 6.14.12.5738, Firefox 4.0]

After the failure of left installation with two boot options

After a failed installation, I find myself with two boot options when starting Windows install & windows 8 How can I clear down the unwanted version.
Windows 8 is in place and works ok.
Just at the start, you get a request as to which version you want to start...

Option 1:

Press the Windows key + X

Click System

Click on advanced system settings

On the Advanced tab > Start up and recovery, click settings

Under system startup, click on in the default operating system: list box

Select Windows 8

Uncheck the box "time to display list of operating systems".

or

Press Windows key + R

Type: MSCONFIG

Click on the Startup tab

Remove the unwanted entry.

or

Use EasyBCD:

EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windows Boot Manager. http://NeoSmart.NET/DL.php?id=1

SELECT options (multiple), ignoring the selected attribute

Hello, all,.
I have the CF code that is used with a tag SELECT (multiple attribute), and it seems that the SELECT tag ignores the attribute selected for the options of the child.
For example, I have the code that will generate the following HTML code:
```
<select name="selectA" id="selectA" multiple>
    <option value="">ALL</option>
    <option value="Option 1" selected="selected">Option 1</option>
    <option value="Option 2">Option 2</option>
    <option value="Option 3" selected="selected">Option 3</option>
</select>
```
But when the page loads, none of these options are selected. Any suggestions? What do miss me here?
V/r,
^_^

There is no code javascript / jquery anywhere that interacts with this menu drop-down lists?

Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month... I tried to work offline at home after working online for a while. The sign came and said ' no Internet connection /- and the options we

Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...
I tried to work offline at home after working online for a while. The sign came and wrote
«No Internet connection / - and the options have been - try again or continue offline "and I could not work no prob. by choosing «continue in offline mode»
However, I've used photoshop for a few hours yesterday and I brought my laptop home from my photographer friend to share the work of editing... and I couldn't open Photoshop.
"The network is not connected TRYagain.
It was the only option, does not allow me to continue offline...
You have an idea why I couldn't?

An Internet connection is required the first time you install and your creative Cloud of license applications.

You can use the applications in offline mode, but must be online from time to time to validate your software licenses. Please see this link for more details: CC help | Creative cloud / Common Questions

Two local options while substituting the attributes in vROPS

Similar Questions

Maybe you are looking for