Select problem with multiple statements

Similar Questions

• Select problem with a statement in the stored procedure oracle

  Hi guys,.
  
  I am new to oracle. I have a simple sql stored procedure that needs to be converted to oracle. The procedure is,
  
  CREATE PROCEDURE my_procedure
  Char (4) @my_var = null
  AS
  
  Select * from my_table where my_variable = @my_var
  
  I converted this SP as oracle and the convert SP is,
  
  create or replace
  My_procedure PROCEDURE
  (
  v_my_var in CHAR DEFAULT NULL
  )
  AS
  
  BEGIN
  
  SELECT * FROM my_table WHERE my_variable = v_my_var;
  
  END;
  
  But the SP above returns an error (Error (13.3): PLS-00428: an INTO clause in the following SELECT statement) when compiling.
  
  So I used the slider to get the results and send back them. Updated the SP is,
  
  create or replace
  My_procedure PROCEDURE
  (
  v_my_var in CHAR NULL by DEFAULT,
  cv_1 ON SYS_REFCURSOR
  )
  AS
  
  BEGIN
  
  OPEN cv_1 to SELECT * FROM my_table WHERE my_variable = v_my_var;
  
  END;
  
  Now, the SP is compiled successfully and return the result set correctly. My doubt is,
  What is the right way to solve the problem that I mentioned above? Is there another way to get the select query result without using a cursor?
  
  Please advice. Thank you for your help in advance.
  
  RAM

  Depends on where you are calling from SP.
  I assume you are using a windows client, as you referred to SQL Server.
  The .NET Oracle provider, allowing return of pl/sql types and as you return only all columns in a single line, you could change your procedure to something like this:

  create or replace procedure my_procedure(v_my_var in  char default null
                                          ,cv_1     OUT my_Table%rowtype) as
  
    rt my_table%rowtype;
  begin
  
    SELECT *
    into   rt
    FROM my_table
    WHERE my_var = v_my_var;
  
    cv_1 := rt;
  
  END my_Procedure;
  /
  

• Problem with multiple downloads with the router. Allows you to change the TCP MSS value?

  Original title: TCP MSS

  Hi all.

  I currently have a problem with multiple downloads with my current router.  If I have two current downloads at the same time I have no access to all web sites.  It's almost as if the downloads take my meaning of bandwidth there is more nothing for ordinary surfing.

  As a test I put an older router on my system and have a significant improvement in performance.  I have 2 downloads in progress and also surf at the same time.

  To compare two routers, I noticed that the only real difference between the two is that the TCP MSS value is set to '0' on the router of the problem, and then assign him 1392 (MTU - 40) on the router to elderly who gives better performance.

  It is my understanding that this value governs the size of transmitted packets.

  My question is this:

  What is the MSS value which is causing the problem?

  Congratulations in advance.

  Be sure to interpret the values. The '0' means no not literally because the link would not work. It is likely, that it allows the local device set limits for the link. Don't forget that there is a Maximum value and as such can be any value up to such limit as defined by all devices in the path.

  You can try capping manually but it is unlikely that any local limit will come to effect unless you set very low.

• Problem with the State showed up in BB10

  Hello

  After the upgrade of my DevAlpha to the latest version, 10.0.9.1675, I have problems with 2-State buttons.

  Example code:

  #myBtn{
      background-image: url(btn/myBtn.png);
      background-repeat: no-repeat;
      background-position: 0px 0px;
  }
  #myBtn:hover{
      background-position: 0px -124px;
  }
  

  So, when I click the button it stay frozen until steady-state, does not return to the default position. All my apps of ww are affected by this problem.

  Anyone can attempt to reproduce this problem?

  If so, what is the solution?

  This is sort of the standard: hover behaviour I noticed in mobile browsers. Since then no cursor, hover is only simulated.

  The simplest solution (and the one I use in my projects) is to use: active instead of: hover.

  #myBtn:active{
      background-position: 0px -124px;
  }
  

• Problem with diagram State Toolkit 1.0 - LV 8.2 upgrade to 2014

  I'm in transition a large amount of code from Labview 8.2 to 2014, and I'm having a problem with state diagrams have been added using the state diagram Toolkit V1.0.

  The figure below shows the question, Labview knows the loop and its components are associated with a state diagram, but it option to change the schema, "change the state diagram," is not available.  In Labview 8.2, which I am currently running on older machines, I would simply select "Change the state diagram" and another window of each State and arrows between States appears, allowing the mounting of the diagram.

  I think I have to install the state diagram Toolkit V1.0 software, but it is no longer available on the Web site of NOR.  There are new States transitions module I installed, but it is significantly different from the old Toolbox and does not support.  Any recommendations?

  Thank you very much
  Phil

  

  Good news:

  (1) SDE still works with SP1 LV2014.

  (2) I have the installer and I'm ready to send it to you. Please send me a private message with your email address.

  Be sure to support this idea.

• problem with loop statement

  Hello

  I'm new in plsql, so I need your help. I am rewriting the existing plpgsql function plsql function, but I have an error on line 15: PLS-00103: encountered the symbol "LOOP" when expecting one of the following values:

  What is the problem with the LOOP statement?

  FUNCTION to CREATE or REPLACE dothework (service_name text string_value)

  RETURNS the text AS

  BEGIN

  DECLARE

  result text;

  varying (31) of tempId character;

  tempFieldId bigint;

  text of tempStringValue;

  tempCount bigint;

  BEGIN

  result = ";

  FOR IN tempId

  SELECT ce.id FROM mfc.card_element this

  WHERE the ce.name AS service_name

  LOOP

  tempCount = 0;

  SELECT INTO tempFieldId mfc.card_field CF field_id

  WHERE cf.field_name = 'NPAname ';

  SELECT INTO tempCount count (*) FROM mfc.card_element_field_value cefv

  WHERE the cefv.card_element_id AS a tempId AND field_id = tempFieldId;

  IF tempCount = 1 THEN

  UPDATE mfc.card_element_field_value

  SET field_string_value = string_value

  WHERE the card_element_id AS a tempId AND field_id = tempFieldId;

  result: = result | tempId | 'UPDATE - YES,';

  ELSIF tempCount = 0 THEN

  INSERT INTO mfc.card_element_field_value (id, field_date_value, field_integer_value, field_string_value, card_element_id, field_id)

  VALUES (HIBERNATE_SEQUENCE.nextval,

  NULL,

  NULL,

  string_value,

  tempId,

  tempFieldId);

  result: = result | tempId | "INSERT - YES, ';

  ON THE OTHER

  result: = result | tempId | "tempCount,";

  END IF;

  -END IF;

  END LOOP;

  RETURN result;

  END;

  END;

  I did the same refatoring I program you unit and put comments to help to understand.

  Let me know if it help you

  FUNCTION to CREATE or REPLACE dothework (service_name in VARCHAR2

  string_value IN VARCHAR2) RETURN VARCHAR2 AS

  -Not necessary to define the new block here BEGIN-

  -SAYS - you only need the instruction stated in this case if you

  -believe that he can raise one exceptional and you want to manage block outsider

  --

  -You must set the buffer of varchar2

  -32767 is the largest amount

  RESULT VARCHAR2 (32767).

  --

  -You can dock this type for the column type, you will receive the data

  tempfieldid card_field.field_id%TYPE;

  -tempstringvalue VARCHAR2; -you do not use this variable

  tempcount NUMBER;

  BEGIN

  -You don't need to initialize with NULL, in this case. PLSQL has done already for you

  -THE RESULT: = ";

  --

  -It seems to me that this request can be outside of the loop

  -Once the table is not the change and the predicate doenst change is

  SELECT field_id

  IN tempfieldid

  Card_field FC

  WHERE cf.field_name = 'NPAname ';

  --

  FOR tempid IN (SELECT ce.id

  OF card_element this

  WHERE the ce.name AS service_name) LOOP

  -It is not necessary to initialize this variable to zero

  -tempcount: = 0;

  --

  --

  SELECT COUNT (*)

  IN tempcount

  OF card_element_field_value cefv

  WHERE the cefv.card_element_id AS a tempid

  AND field_id = tempfieldid;

  --

  IF tempcount = 1 THEN

  UPDATE card_element_field_value

  SET field_string_value = string_value

  WHERE the card_element_id AS a tempid

  AND field_id = tempfieldid;

  RESULT: = RESULT | tempid | 'UPDATE - YES,';

  ELSIF tempcount = 0 THEN

  INSERT INTO card_element_field_value

  (id

  field_date_value

  field_integer_value

  field_string_value

  card_element_id

  field_id)

  VALUES

  (hibernate_sequence.nextval

  NULL

  NULL

  string_value

  tempid

  tempfieldid);

  RESULT: = RESULT | tempid | "INSERT - YES, ';

  ON THE OTHER

  -I remove the tempCount on the "because I think you want to see the number of records

  -you do business with

  RESULT: = RESULT | tempid | ' ' || tempCount | ', ';

  END IF;

  END LOOP;

  RETURN RESULT;

  -END;

  END;

  Best regards

• Problem with Decode statement

  Hello
  
  I try to do the following in my report:
  
  If an employee is a family name. (dot) or a name of. (dot), the report does not display a point. An employee name consists of the family name, first name and middle name, which should all be concatenated sets. An attempt to achieve this goal, I have the following statement in my report:
  
  Decode (e.Surname, '.', (LTRIM (RTRIM ((INITCAP (e.FIRST_NAME))) |))) » '|| INITCAP (e.MIDDLE_NAME))),
  e.FIRST_NAME, '.', (LTRIM (RTRIM ((INITCAP (e.Surname))) |)) » '|| INITCAP (e.MIDDLE_NAME))),
  (LTRIM (RTRIM ((INITCAP (e.SURNAME))) | ',' |)) INITCAP (e.first_name) | » '|| INITCAP (e.MIDDLE_NAME))) as emp_name
  
  E employee
  
  Problem: The above statement only works for employees with the name of. (dot). It doesn't for the first names of dot. How to use the decode statement OR is there another way to do it without using the CASE statement?
  
  It seems my decode statement does not work with 2 different fields (name, first name) tested within the decode statement. Thank you.

  LTRIM and RTRIM the comma too:

  select rtrim(ltrim(rtrim(ltrim(', Somename ,',','),','))) Name
  from dual;
  
  NAME
  --------
  Somename
  

• problem with if statement

  I have problem with this code haven. It shows error illigical use of the else statement. I checked the syntax is at but I don't where is my problem

  I have a drop drop list box. If the user selects objects in textfields txt_contract1 & txt_contract2 of named values has the new change.iam of java script. is it possible to programmetically edit from vb.net. IAM familiar with it.

  DataRoot. Transmittal_pdf. DropDownList1::click - (JavaScript, client)

  If

  (xfa.event.newText == 'Strategic') { }

  XFA. Form.DataRoot._Transmittal_pdf.

  DataRoot._Transmittal_pdf. Table5.row2.txt_contract1. Value

  = "Blueprint of strategic roads."

  DataRoot._Transmittal_pdf. Table5.row2.txt_contract2. Value

  = "These immediate plans."

  }

  on the other

  {

  DataRoot._Transmittal_pdf. Table5.row2.txt_contract1. Value

  = "Held consultation projects;

  DataRoot._Transmittal_pdf. Table5.row2.txt_contract2. Value

  = "";

  }

  Hi Prasad,

  'V' should be in the rawValue capital 'V' instead of small "v". So, it should be rather than rawvalue rawValue.

  Thank you

  Sidonie.

• Problems with multiple worksheets XY plotting (program generates repeated data)

  Hello

  I want to make a small program that will reduce the amount of time to go forward with the measurement data. I get data into .dat format, where all the files consist of frequency measurement with an X and a Y column. The problem is that I made 4 experiments (X column is the same for each experience) with 15 measures file each and more than 500 points of measurement in each file. I would like to make a simple manipulation and this copy that information to a file with same X column and multi-column, later I could use these data with Excel or origin (do it manually, it's frustrating and time consuming).

  At the beginning my program reads the background information with X and Y (b), and after I open the worksheet to insert the X and data of Y (n). (make a simple manipulation, like dividing Y (n) /Y (b), program show a graph of the current data and another graph multiple data, which are stored and must be exported in .txt, .dat or directly to Excel (which is more preferable)). I'm OK with the opening of several files of data, but which are not okay with copy/paste file and handle all that data manually, but that's my motivation for this program.

  The attached example can do all this (except for the entry in the file). He draws multiple charts on a XY chart using cluster and travel records. It is even possible to extract data in Excel, all that graphic, but the real problems comes with data are always added because of the loop. This gives a lot of empty and repeated data later. I'm jonesing to get rid of this. I have also attached several files of measure: 1 background and 3 measures.

  P.S. I tried to save time thanks to this program, but now, I spent more time than if I did it manually

  Your program absolutely no sense. What is the purpose of the structure of sequence? It just sits there, operating both in parallel to the while loop. Probably that you read from the local variables before other parts of the program had a chance to write valid data for them.

  In the while loop, you have a case of timeout that adds the same data over and over again, every 50ms. Why?

  Your mechanical actions "switch release" are misguided. Use actions to latch and remove structures deal as part of the event.

  Try to rethink the problem once the mode, and then solve the problem with 20% of your current code. See how far you get.

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Major problems with multiple items of page on the web viewer since the last update

  In the last days, we had problems with all our multiple page items that are newly updated or added on the web viewer.

  Scrolling of pages just to repeat content again and again and true articles page see first pages content overlaid on all subsequent pages. It seems that something important broke in the way that the dps push articles to the webviewer, as is happening through fact sheets and articles. This means that we cannot publish anything until it's resolved.

  Someone knows something similar? Any suggestions?

  Hi Lucie,.

  Please contact support for assistance with this enterprise. They can investigate and open a support issue with if necessary engineering team. Contact information is available by logging into http://digitalpublishing.acrobat.com/ and looking at the Middle bottom of the screen.

  Neil

• Problem with multiple threads

  I have a program that interacts with an ESX 3.5 server using the VIX API, written in c#. I'm from multiple threads in c# program with each thread running an automation process which creates a connection to a virtual machine on the ESX Server, some automated process, and then disconnects. I'm having problems with this. When I call Disconnect() from one of the threads, it seems to cause problems with my other son if they have not yet disconnected. I connect to an another VM on the server in each thread. The problem is if I don't call disconnect, I get errors, but if I call disconnect in a thread it causes errors. Y at - it something similar? Any suggestions on how to make this run smoothly? Thank you!

  This sounds a lot like you are getting hurt by the host sharing of handle.  If HostConnect() is called with the same parameters, the handle of the host gets reused.  HostDisconnect() will clean this handle, even if his commune.  It's actually documented behaivior.  We have also decided that there may problems like the one you have reached, so it will be removed in a future release.

  So your application will share the handful of host among all discussions, and as soon as we call disconnection, the host handles in other countries also becomes invalid.

  Make a unique HostConnect() and share this handle inside threads is a way to avoid this.  HostConnect() is generally quite expensive, so we recommend in all cases.

• problem with multiple digital signatures by deactivating the fast web view

  Hello, I use acrobat pro 9.1 and have questions regarding a problem with several signatures on a pdf document.

  Why I ask the question below? My job is to prepare PDFs for submission to the FDA. The FDA requires, among other things, the documents submitted electronically have quick view active web.

  I am currently exploring ways to use digital signatures to sign pdf reports and always make sure they are spec FDA compliant. My question concerns a document which would have several signature fields. What I do, it is to create at least two signature fields in the doc and then save and optimize everything for fast web viewing. When I connect the first box and save, the file retains the fast web view state. Yet, when I apply and signatures past one, the file is then left for quick web display with no obvious way to turn it back on. I'm confused as to why it gets disabled after the second, and not just after even the first condition has been signed. And, of course, I would like to know if it is possible to maintain the fast web view and how to do it. I will gladly accept "tinker under the hood' suggestions file if they exist as well.

  Please let me know if something is not clear or you would like more information.

  Thanks for your time and your help.

  ~ Vlad
  

  Hi Vlad,

  Real Michael has got the right answer. A "Linearized" file (which is a file that has been optimized for fast Web view) aims to get the first page to display as soon as possible so that you can start playing without waiting for the rest of the file to download. Incidentally, the first designated page should not necessarily be page 0 (use of PDF has zero according to the pages counting system), but it usually is. The PDF specification, "the main objective of linearized PDF is optimized PDF documents viewing read-only. It is expected that the linearized PDF generated once and read many times. Incremental update is still permitted, but the PDF is is more linear and subsequently is treated as ordinary PDF. »

  When you open a PDF file the first time that the backup process is a full 'save', it is the whole document is rewritten, so there is no more than two percent markers EOF (end-of-file) inside. The first expressions of folklore means what page to see the first and the second EOF designates the end of the rest of the file (so the browser knows when to stop downloading). However, when you add a second signature (or even longer) the file is saved as a "record growth" and new data is appended to the original file. It is that you can do a restore to the previous signed version and allows Acrobat/Reader verify the integrity of each signature regardless of any other signatures. It's the incremental save, breaking the linear optimization of the file.

  Steve

• Problems with multiple framerates and Blackmagic Decklink 4 K Extreme reading

  Recently, I exchanged by AJA Kona card for extreme Blackmagic Decklink 4 K in order to get external followed in DaVinci Resolve.

  I work in a 1080 p 23.976 project that includes a 29.97 SD and HD images. Loading these images of 29.97 FPS in my layer source footage, I meet regularly with frozen reading (the triangle of game in my toolbar becomes a symbol of the square and stays that way). From there on, I am unable to playback images in any scenario and requires a complete closure of the system to return to normal! The problem is apparently BOUNCING, with successful reading happening sometimes.

  Images of 29.97 was DVCPRO, I tried to transcode to Prores to solve problems. No dice. I think it's a problem related to the inability of the Decklink to manage several rate display on the fly, but wanted to present here, too. I also experienced delays intermittent sync on my monitor.

  DeckLink driver 10.0

  First CC 7.2.1

  Mac OSX 10.9.2 (mavericks before the same problem)

  Hi Andy,.

  You should not have problems with Blackmagic manage several formats on the fly. However, I believe that the problems of reading frozen that your description is related to the Desktop Driver video 10. I suggest rolling back to 9.3.3 for now. Blackmagic now turns on this issue.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• problem with the statement select

  I want to view records that start with the letter D for a particular ID of a table called THE. To do this, I wrote the select statement with as operator.but when duplicates were found in the table it would not display. for eaxample

  create table tea(id number(40),f_name varchar2(150));
  
  INSERT INTO tea ( ID, F_NAME ) VALUES ( 
  832, 'Magnolia St. #12'); 
  INSERT INTO tea ( ID, F_NAME ) VALUES ( 
  832, 'Magnolia St. #10'); 
  INSERT INTO tea ( ID, F_NAME ) VALUES ( 
  1909, ' Delaware Ave.'); 
  INSERT INTO tea ( ID, F_NAME ) VALUES ( 
  1909, 'Delaware St.'); 
  INSERT INTO tea ( ID, F_NAME ) VALUES ( 
  832, 'Mangolia'); 
  INSERT INTO tea ( ID, F_NAME ) VALUES ( 
  832, 'Monolia'); 
  INSERT INTO tea ( ID, F_NAME ) VALUES ( 
  1909, 'Delaware'); 
  INSERT INTO tea ( ID, F_NAME ) VALUES ( 
  1909, 'Mandea'); 
  commit;
  
  select * from tea order by id;
  
      ID F_NAME
  ------ ------------------------------
     832 Magnolia St. #12
     832 Magnolia St. #10
     832 Mangolia
     832 Monolia
    1909  Delaware Ave.
    1909 Delaware St.
    1909 Delaware
    1909 Mandea
  
   now when i try with letter 'M' for 832 it is displaying the all the records starting with M
  select f_name from tea where upper(f_name) like upper('m%') and id=832;
  
  F_NAME
  ----------------------------
  Magnolia St. #12
  Magnolia St. #10
  Mangolia
  Monolia
  
  but when i tried with D it is not displaying  Delaware Ave.
  
  select f_name from tea where upper(f_name) like upper('d%') and id=1909;
  
  F_NAME
  -------------
  Delaware St.
  Delaware

  I'm unable to display folder Delaware Ave. , for the id of 1909. I need display this folder also.
  What could be the reason it is display for "M" and showing not "d".
  any suggestions please?
  I use 9i

  Because there is a space character before Delaware Ave
  Watch your insert statement

  INSERT INTO tea ( ID, F_NAME ) VALUES (
  1909, ' Delaware Ave.'); 
  

  To take

  INSERT INTO tea ( ID, F_NAME ) VALUES (
  1909, 'Delaware Ave.'); 
  

  And it should work

  - - - - - - - - - - - - - - - - - - - - -
  Kamran Agayev a. (10g OCP)
  http://kamranagayev.WordPress.com