Problems with multiple monitors for critical update Windows 7

Similar Questions

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Display problems when you run applications JavaFX 2.0 with multiple monitors

  I noticed a number of issues when running JavaFX 2.X applications on a system with multiple monitors. My setup consists of 2 monitors (primary and secondary on a dual graphics card) and my third on a separate graphics card.
  
  The questions I have observed are,
  
  (1) the application is not too sensitive when running on the second or third monitor.
  
  (2) when the application runs on 2 monitors and re-tire it will only redraw correctly on one of the monitors. The application will be displayed as a black box on the another moniter
  
  (3) where the application does not run on the primary monitor and a ChoiceBox is selected choice appears as expected but it blackens the application in the background.
  
  Someone else encountered similar problems? I'm going to raise a JIRA with screenshots and details of my system if other people are able to confirm that they are also suffering from similar problems.

  Hi, I had similar problems. My application uses 2 monitors and now everything works just perfect. It turned out that the interface is causing these disorders. I changed mine, then he worked (actually more the new installed I also had to update the driver for the new interface)

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• Windows 8 "There is a problem with the driver for bluetooth hands-free audio"

  There is an X symbol by the sound icon, when clicked, it shows "There is a problem with the driver for the audio blue tooth hands-free". Troubleshooting has not been set, said that there is a bluetooth hands-free audio driver problem. In addition, when you look at the audio in Device Manager, error code 19 lights during all the points listed under ' audio, video and game controllers ".

  Hello

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted audio driver or settings.

  I suggest you run this Microsoft fixit and verify.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  I would also say that you uninstall and reinstall the sound drivers under "Audio, video and game controllers" and check.

  To uninstall the driver, please follow these steps:

  a. press Windows + R keys, type devmgmt.msc in the run window and press ENTER.

  b. Click to enlarge "Audio, video and game controllers", right click on the device, and then click Uninstall.

  c. restart the computer.

  Now, reinstall the drivers from the computer manufacturer's website and check the.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Oh no! There is a problem with your recent payment. Update the details of payment for uninterrupted service.

  Hello

  I get this message:

  
  Oh no! There is a problem with your recent payment. Update payment details for uninterrupted service.

  But I have no idea what the 'problem' and payment information are correct...

  What should I do? It seems impossible to contact any Adobe
  

  Hi liamg9149512,

  I see that the payment issue is now resolved with your account.

  Please let us know if there is anything else, we can help you.

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Problems with aero after the latest updates

  Hello

  Someone had a problem with the latest Microsoft security updates
  touching the aero desktop theme.

  Since I downloaded the updates my aero as a theme stopped working.
  I did a roll windows back but I still have the same problems.

  The updates are #KB971029 and #KB971029 the
  updates have been downloaded on 03/17/11

  I hope someone can help with this problem.

  All the best

  Philip Davies

  Hello

  OK try to remove these updates to see if that helps. Sometimes manually
  install the updates one at a time will prevent topics such as this one (if the)
  mises_a_jour have been the question).

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Or

  The problems with the removal of updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-removing-updates

  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  AFTER removal of updates, do a system restore to before
  updates have been applied to the origin. Therefore, affect the total amount of
  updates are deleted.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  =======================================================

  If necessary:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ======================================================

  If necessary try a repair Installation which allows to keep the programs and data however
  redundant backups are always a good idea.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

• 4235 with multiple monitoring Interfaces?

  This is a general question as to whether anyone is running on 4.0 4235 sensor code with multiple monitoring interfaces?

  Basically, I wonder if you have any comments on the performance or if you run into any problems with the configuration. I have not seen too much documentation for configuration in fact this, so I wonder if there are additional requirements or considerations.

  Hi Chad,

  With ID 4.0, you can only montior using an interface to sniff. 4.1 you will have taken care of multiple monitoring interfaces.

  As far as performance goes, I don't see any problems and more to ensure that the management station is able to handle the upcoming alarms when using several interfaces.

  Thank you

  Obaid.

• Audition with multiple monitors and nVidia - crashing / flicker

  When using mulitple monitors hearing signal several times at the start, take longer to start and often crashes.  When you use a single monitor, hearing throw very well.  We run Windows 7 Pro on to Lenovo T430 with nVidia NVS 5400 M card.  I have also some Lenovo x 230 who have Intel Graphics.  When you use multiple monitors with Intel graphics card, it works fine.

  E-mail log files (na not see an option on attach firmly to this topic).  It seems that the main difference is not only with multiple monitors, but rather with nVidia graphics.  Multiple monitors on a laptop computer Intel Graphics ONLY works great... no problems.  Multiple monitors on a computer of graphics from nVidia has problems.  However, when the didn't use a monitor on nVidia computer, it works fine.

• I have a problem with my password for my MSN account.

  I'm having a problem with my password for Windows Live.  It does not recognize the sensitive passwords case.  I asked cela before and you refered me to Windows Live.  And I give them credit.  They tried several times to fix my problem and failed.  Then they refered back me to you.  And guess what, you refered me to Windows Live.  I'm stuck in limbo between you two.  CAN SOMEONE HELP ME WITH MY PROBLEM PLEASE?  PLEASE...  PRETTY PLEASE...

  This is a forum for issues relating to security, privacy and user for the Windows XP operating system accounts.

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• Problems with Vista start after the update of Norton.

  I had problems with start-up since Norton updated and re-printing my subscription a few days ago.  Initially, the splash screen would freeze, I'll try to re-start, only to be refrozen.  After several attempts, with different amounts of time in between, I tried to start a 'normal', but are also intended to "launch fix."  Microsoft solution is to go back to "settings" before the new and improved Norton Security has been installed.  "Norton isn't too happy with this solution, warning: your firewall is disabled, you are vulnerable to all viruses known to humanity" and Norton resets security and the volley continues.  At some point, the screen may freeze, and I have to start all over again.  Had my Vista Home premium SP1 and SP2 installed this past year, patches and I have had no problems since, so far.  If anything is not easy? The pearls of wisdom would be greatly appreciated.  The garbage man comes tomorrow, I'm tempted to put my computer out of the trash.  Help. Please, I beg you.

  Hello, Heather,

  Boot safe mode with networking.  Download the following tool and run a full scan to exclude the malware.  If the system is infected, Norton will be compromised and would not be able to detect malware.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  Reboot - still problems with startup?  Uninstall Norton - use the uninstaller to remove all traces.  Restart your system and reinstall the software.

  Norton Removal Tool

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&LG=English&CT=United+States&product=home&version=1&PVID=f-home&entsrc=redirect_pubweb

  Once you have completed and reinstalled Norton, test - you still having the problem?  Try the link to clean boot troubleshooting below.

  The best advice I can give you is not no use Norton products.  Use Microsoft Security Essentials, which is freeware.

  Perform a clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

• Failed to perform recovery of factory setting - error 0x8007045D Code / product key error - "ERROR!" We encountered a problem with the request for approval.

  Original title: product key error

  Hi all...

  I have ' tried to download the disc Image of Windows 7 (ISO file), but when I insert my product key, the system cannot check it.
  I use the laptop Sony Vaio VPC EG35EG with preinstalled Windows 7 Home Basic 64 bit inside.
  Now, after that there is error (I cannot yet perform plant pose recovery; always finished with error 0x8007045D Code), I need to install clean my laptop with the USB or DVD Installer key. But then, when I try to download it, my product key (I found it on the sticker at the bottom of the laptop) are not validated by microsoft. It is said:

  "ERROR!" We encountered a problem with the request for approval.

  What should I do now? Y does it can someone help me?
  Thank you.

  Consider the following text:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  also check:

  https://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/