Select Remote Server [from: to see the files in your repository to define Version control settings]

Similar Questions

• To see the files in your repository to define Version control settings.

  I use Dreamweaver CC every day (Windows 7). Dreamweaver is updated. Today, I receive the following message if poster for all the sites that I try to work. "See the files in your repository, you must set its Version control settings."

  When I go into the settings of Version control, access is set to 'NONE' and the rest of the controls are grayed out.

  Any ideas why it would start now?

  How can I fix it.

  Ok.  Do a clean reinstall with the cleanup of CC tools.

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Nancy O.

• I upgraded the firmware Sansa Clip & now I don't see the files I had previously in

  Hi guys, this is my problem: I have a sansa clip v2, it worked fine until yesterday, when I updated the firmware with sansa updater; the upgrade went smoothly, but now my windows xp sp3 detects the drive because it was a normal penstick/external hd and I cannot see the files I already had in it: I can still listen to their - players works as usual - but, as I don't see them, I can't delete them! I tried the "hidden and system files" in folder options, but it did not help. I think that after the upgrade of the internal structure of the file has changed a bit, now it is: sound, music, audio books, podcasts, record, WMPinfo.xml, MTABLE. SYS, RES_INFO. SYS, SYS_CONF. SYS, version.sdk. I try to put a few new files in the folder "music" and it works perfectly, they appear in the player, so the problem is only with the 'old'; in fact, I would not delete them mind these files if it is not necessary, because I have them on my hard drive).

  I hope someone can help me, thank you very much! (and please excuse my bad spelling & grammar, I'm Italian!  :-))

  1. pick up your player Sansa Clip - the physical drive you bought.

  2. activate.

  3. press the small 'home' button, the small button on the front of the item located at the top right of the Ferris wheel - it's the small button with the little house printed on it.

  4. press on the lower part of the wheel (at 06:00 position) until the screen shows the settings.

  5. press once on the right side of the wheel (at 03:00 position) to access settings options.

  6. press on the lower part of the wheel (at 06:00 position) until the display shows USB mode.

  7. press the right side of the wheel (at 03:00 position) once to enter USB mode options.

  8. tap up or down the Ferris wheel (at 12 and 06:00 positions) and select the USB setting menu is currently not checked (I think that this will be the PSG; ignore the setting "Auto", for the reasons I stated above), then select it by pressing the right side of the wheel (at 03:00 position).

  9. you have now set your video mode MTP USB drive.  Press the small home button twice to return to the regular game mode.

  And that's all.  Now when you connect your player to Clip on your computer, your files should appear on your computer.  If they don't, repeat the above, but set the USB to the MSC mode.

  I hope this helps.

  PS As I said earlier, the USB modes, the MSC mode (compared to the MTP mode) is more universal and will work on multiple computers.  If you use a video player on other computers, you can set your video player in MSC mode, to ensure that it will connect to other computers.  If this is the case and if your video player has been set to MTP mode so far, before changing the setting of mode USB mode MSC, to be able to see all files in the reader of your video on your computer, first copy the files from the drive of your music back to your computer delete them out of your video player, set the Clip Player USB Service mode weather of the Canada (see above) and then copy the files to your video player.  This ensures that you can see all the files of your video player when it is connected to your computer.

• Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Ivan,

  If it's on the rectangular objects, you may have encountered the bug Rectangle Live which is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

  Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587

• Firefox 19 may allow installation of software from web sites, or must there always save the files on your computer first

  Firefox 19 may allow installation of software from web sites, or must there always save the files on your computer first

  You must save the files on your computer before running them.
  
  In this way your security software can scan the file to see if it is safe.

• Can't see files in external drives but I can see the files.

  For these last days, I have this problem that I don't see the files on my external drives so I'm just save all the files in the main directory. I already checked the external drive on another machine and I see the files there. I use Windows XP Professional. I tried different malware and I use Mcafee virus scan 8.7i and dat is updated.

  Hi Buhgram,

  ·        What happened in safe mode?

  ·        Have you tried to format the external hard drive or USB key?

  (a) that you can run a virus scan online from the link given below and check if the problem persists.

  http://OneCare.live.com/site/en-NZ/default.htm?mkt=en-NZ

  Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.

  (b) you can also download & run Microsoft Security Essentials on your computer.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 can not "see" the files on my external hard drive all of a sudden after I used ICACLS to give me full control.

  I used ICACLS in a command prompt high to give me all permissions for all on the external hard drive. I do not share the disk or remove permissions from any other 'user' but all of a sudden the guest not to see the files on the disc and I don't know what to do about it. But when I open a window and go outside, the files are there, I can access it, use them in all cases, I would normally.

  Anyone has an idea why an elevated command prompt would not be able to see the files that are clearly on the external hard drive? There is just something not right on command prompt, you see only not the files that are there.

  Thanks in advance

  Update: it turns out that there seems to be some kind of conflict between the UAC and the Administrators group. Don't know how I was touched, but I finally finished refusing authorization in writing system on my external hard drive. Suddenly Builtin Administrator, users of Builtin and NT Authority stood, one of them, or another group, resumed training, locked read-only access to all files, and then he took it a little further and removed my ability to write attributes or read them. I was forced to use a back up 'Admin I have on standby with a third I reapplied my main administrator permissions, but still denied access. After doing things with ICACLS, I was able to get a partial control, but I still couldn't save.

  At the end of the road, it turns out that an external hard drive formatted in NTFS is recognized by the computer as a disk fixed, as if it were part of the computer, and there it was treated as such, given my file system files by locking the.

  Even with the hidden Builtin Administrator I activated, I couldn't access the files. I finally had to move all the girls to the drive c:\ and format the external drive with exFat so that the system do not think that he was part of the computer. Unfortunately, I can never depend on having a System Image backup because exFat cannot have a writing for her.

  I have full access, as well as anyone and everyone, there is no permissions on exFat, so it's a compromise, better than the system for the control of my own computer ruined combat...

  Luke

• I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still re

  I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can we do?

  Moved to this discussion in the creative forum cloud download & install.

  R.O.B. Please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to resolve the error of connection between the computer and our activation server.

• I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I backed up my favorites using 'import and backup/Backup' on an external HD, installed Windows 10 and went to restore my bookmarks and noticed the file named "Firefox bookmarks-2015-09-04"had no extension and does not work."

  Please advise! Thank you! Sincerely, s

  If you add the .json extension, it works then? Why people who design browsers or extensions them do create files with no extension name, in spite that these extension names are essential to make the files can be restored? I could never understand that.

• How to make a record that I downloaded on my computer and to make into smaller files so that I'd be able to send them an existing voice mail? From now on, the file is large to send

  How to make a record that I downloaded on my computer and to make into smaller files so that I'd be able to send them an existing voice mail? From now on, the file is large to send.

  Hi kristieann,

  ·         What version of the operating system is installed on the computer?

  You can search for any third-party application, using your favorite search engine to split the recording file.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• In Outlook Express, can not see the file tab, such as page moves right

  I can't move the Outlook Express mail page to the right.  It just won't go further to the right.  I get the arrow on the right side, but he doesn't hover over.   So I don't see the file, only a part of the Mail tab tab (-Arnaud).

  It is not really clear what you mean.  You can move the entire window of OE by clicking on the title bar (blue at the top of the window) and hold the mouse and then moving the mouse.  It is also not clear what you hear on the mail tab and the file tab.  Are you sure you're saying OE and not Outlook?  You can also try view | Layout to change what is displayed.

  Steve

• How can I see the file extensions?

  I use to be able to see the files file extensions, for example: .mp3, or .rtf or .doc, etc.

  Now, I can't. I can see the hidden files.

  Is there a way to see the old files if I need to? I have to rename a bunch of files, music, and documents and will not mix things.

  Also does the same thing in Vista and Win7? I have Vista on my laptop, and it seems that extensions are not there either. Sometimes, it's ok, but not now.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/how-can-is-see-file-extensions-for-known-file/8a3bcace-324F-4b2d-840B-fff8b23be427

  Overdraft. Too bad. Thread can be closed.

  Thanks anyway.

• I used "windows easy transfer", but after that I can see the files. Any idea about it?

  I used "windows easy transfer", but after that I can see the files. Any idea about it?

  original title: Windows easy transfer

  Hi Vrajeshparekh,

  1. what files you're talking about?
  2. When you see the files?

  When you use the Windows easy transfer cable to transfer the data that the data is copied. So you copy the data on the old computer also.

  Windows Easy Transfer (applies to Windows Vista)
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  How Windows Easy Transfer makes setting up a computer easier? (Applies to Windows Vista)
  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easier

• Why I can still see the files deleted and renamed on a shared directory?

  Why I can still see the files deleted and renamed on a shared directory, but my co-workers can't see them? Is there a setting on my pc that I need to change?

  Hello
   
   
  Thanks for posting your question in the Microsoft Community.
   
   
  The question you posted would be better suited in the TechNet Forums.
   
  I would recommend posting your query in the link below.
   
   

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that the information above helps you.

• When someoned saves a file to a shared drive on a network, why another person can't see the file on the shared drive?

  When you save a pdf file to one of our readers shared labour, we cannot always see the pdf file made by another partner so that we can combine multiple PDFs into one. If you open the file to a shared drive on the network and save to PDF on the drive in question, a dialog box is in place that the file is already there and you want to replace it, but it does not appear on pc, but, another partner can go to the shared drive and can see the file while others do not. What can cause that?

  Hello

  According to the description, you are facing problems with file sharing on a shared drive on a network. In order to quickly provide a solution, please answer these questions:

  1. what type of network, the computer is connected to?

  2. what security software is installed on the computer?

  In the meantime, you can consult the following articles for more information on the file share:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

   

  Find files and folders on other computers on a network

  http://Windows.Microsoft.com/en-us/Windows7/find-files-and-folders-on-other-computers-on-a-network

   

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information helps. Reply with more information about the issue so that we can help you better.