Select the element with PL/SQL

Similar Questions

• Select the line with the smallest Beach

  Hello
  I am trying to build a complex query...
  He must select the line with the inner range...
  
  I'll explain for example:
  Location of poolsize ID value
  1 32 8
  2 40 6
  3 42 8
  4-36-3
  
  I want to select the line where the fork between value and value + poolsize is shared also with the other location...
  so:
  1 is 32-40 (in A place)
  2 is 40-46 (in place)
  3 is 42-48 (location B)
  4 is 36-39 (at location B)
  
  4 is located at 1 (and there are different places...) so sql must return to the fourth line.
  
  Any help will be appreciated!
  
  Thank you
  fcbman

  Hello

  fcbman1899 wrote:
  Hello
  I am trying to build a complex query...
  He must select the line with the inner range...

  I'll explain for example:
  Location of poolsize ID value
  1 32 8
  2 40 6
  3 42 8
  4-36-3

  Whenever you have a problem, please post CREATE TABLE and INSERT statements for your sample data, in order to let the people who want to help you re-Ridge the problem and test their ideas.
  See the FAQ forum {message identifier: = 9360002}

  I want to select the line where the fork between value and value + poolsize is shared also with the other location...
  so:
  1 is 32-40 (in A place)
  2 is 40-46 (in place)
  3 is 42-48 (location B)
  4 is 36-39 (at location B)

  4 is located at 1 (and there are different places...) so sql must return to the fourth line.

  To find all the rows that are within the range of at least one other line with another location:

  SELECT     *
  FROM     table_x  m
  WHERE     EXISTS (
               SELECT  1
               FROM        table_x
               WHERE   location          != m.location
               AND        value          <= m.value
               AND        value + poolsize     >= m.value + m.poolsize
              )
  ;
  

  When you talk of the "" * most * inner range ", do you mean that you might have another line, such as"

  INSERT INTO table_x (id, vlue, poolsize, location) VALUES (5, 37, 1, 'C');
  

  which is inside the range of id - 4, and that's why you wouldn't have id = 4? If so, include examples in the results and data sample yout. You can do this with a query CONNECT BY, or, depending on your version of Oracle, a WITH recursive clause.

• Creating an element indicates the element with the name already exists

  Hello dear,
  
  I'm on R12
  
  We are to modernize a few standard Link elements that weren't before. So I end of all the links in the element and then end the element as 31-dec-2012.
  I am trying to use the same element of 1 January 2013 and set it as a standard binding element, but it is throwing an error indicating that the element with the name already exists
  who is reasonably.
  
  My requirement is that I wanted to use the same element name and set it as a standard link. I can do this.
  
  Your entries are highly appreciated.
  
  Thank you

  You can go the previous day, press Delete again, and select Remove next or all future changes

• 12 elements Photoshop on my other Mac having recently had not smashed, new no CD player. How do we install the elements with my product key? Buying an external CD drive is not an option at the moment after the fork on the 2500 for the new Mac...

  12 elements Photoshop on my other Mac having recently had not smashed, new no CD player. How do we install the elements with my product key? Buying an external CD drive is not an option at the moment after the fork on the 2500 for the new Mac...

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5.6| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Select the emp with a maximum salary for each hr.emp manager_id

  Hello
  Can someone help me to do this without doing any partitioning or analytical f:
  
  Select the emp with a maximum salary for each hr.emp manager_id.
  
  HR. EMPLOYEES Table Description: =.
  EMPLOYEE_ID
  FIRST NAME
  LAST_NAME
  HIRE_DATE
  JOB_ID
  SALARY
  COMMISSION_PCT
  MANAGER_ID
  DEPARTMENT_ID
  
  TX, all the guys
  Mario

  Hi, Mario,.

  Here's one way:

  SELECT       *
  FROM       hr.employees
  WHERE       (manager_id, salary) IN (
                                        SELECT    manager_id
                            ,               MAX (salary)
                            FROM     hr.employees
                            GROUP BY  manager_id
                                 )
  ;
  

  mario17 wrote: Hi,
  Can someone help me to do this without doing any partitioning or analytical f:

  Do you mean analytical functions?
  Why you don't want to use the analytical functions? Analytical functions, permitting the simpler, more robust and more effective to achieve these results, wouldn't you want that?

• How can I configure the element with the script names?

  Could Hello someone give me a hand?

  I created symbols on the stage of this script below.

  ------------------------------------------------------

  for (k = 0; k < 5; k ++) {}

  sym.createChildSymbol ("mySymB", "Stage");

  }

  ------------------------------------------------------

  How can I configure the element with the script names?

  Because, when I try to control a symbol by using the getSymbol("---") command.

  I need to know the name of the item given to each symbol.

  Concerning

  Yes, you're right.

  Using 'Code-Example' If you write sym.getSymbol ("mySymB") that edge returns the undefined value.

  With "Drag-and-drop-Example", you can use sym.getChildSymbols ().

• How can I get the value of the element with the namespace?

  I tried to get an element of value in xml a namespace, but I can't.
  I removed the namespace, I get a value of the element.
  
  How can I get a value of the element with the namespace?
  
  -1. Error ----------- xml ------------------------------
  <? XML version = "1.0" encoding = "UTF-8"? >
  
  * < TaxInvoice xmlns = "" urn: kr: or: kec:standard:Tax:ReusableAggregateBusinessInformation:1:0 "xmlns: xsi ="http://www.w3.org/2001/XMLSchema-instance"xsi: schemaLocation =" urn: kr: or: kec:standard:Tax:ReusableAggregateBusinessInformation:1:0 http://www.kec.or.kr/standard/Tax/TaxInvoiceSchemaModule_1.0.xsd "> *"
  < ExchangedDocument >
  < IssueDateTime > 20110810133213 < / IssueDateTime >
  < ReferencedDocument >
  < ID > 318701 - 0002 / < ID >
  < / ReferencedDocument >
  < / ExchangedDocument >
  < TaxInvoiceDocument >
  < IssueID > 201106294100 < / IssueID >
  < > 0101 TypeCode < / TypeCode >
  < IssueDateTime > 20110810 < / IssueDateTime >
  < PurposeCode > 02 < / PurposeCode >
  < / TaxInvoiceDocument >
  < TaxInvoiceTradeLineItem >
  < SequenceNumeric > 1 < / SequenceNumeric >
  < > 200000000 InvoiceAmount < / InvoiceAmount >
  < TotalTax >
  < CalculatedAmount > 20000000 < / CalculatedAmount >
  < / TotalTax >
  < / TaxInvoiceTradeLineItem >
  < / TaxInvoice >
  
  
  -2. success - xml - remove namespace.
  <? XML version = "1.0" encoding = "UTF-8"? >
  < TaxInvoice >
  < ExchangedDocument >
  < IssueDateTime > 20110810133213 < / IssueDateTime >
  < ReferencedDocument >
  < ID > 318701 - 0002 / < ID >
  < / ReferencedDocument >
  < / ExchangedDocument >
  < TaxInvoiceDocument >
  < IssueID > 201106294100 < / IssueID >
  < > 0101 TypeCode < / TypeCode >
  < IssueDateTime > 20110810 < / IssueDateTime >
  < PurposeCode > 02 < / PurposeCode >
  < / TaxInvoiceDocument >
  < TaxInvoiceTradeLineItem >
  < SequenceNumeric > 1 < / SequenceNumeric >
  < > 200000000 InvoiceAmount < / InvoiceAmount >
  < TotalTax >
  < CalculatedAmount > 20000000 < / CalculatedAmount >
  < / TotalTax >
  < / TaxInvoiceTradeLineItem >
  < / TaxInvoice >
  
  
  
  
  -program-
  procedure insert_table
  (
  l_clob clob,
  OK, Boolean.
  Error out varchar2
  )
  is
  l_parser dbms_xmlparser. Analyzer;
  xmlDoc xmldom.domdocument;
  
  l_doc dbms_xmldom. DOMDocument;
  l_nl dbms_xmldom. DOMNodeList;
  l_n dbms_xmldom. DOMNode;
  l_root DBMS_XMLDOM.domelement;
  l_node DBMS_XMLDOM.domnode;
  l_node2 DBMS_XMLDOM.domnode;
  l_text DBMS_XMLDOM. DOMTEXT;
  
  buf VARCHAR2 (30000);
  
  XMLParseError exception;
  
  TYPE tab_type is Table of xml_upload % ROWTYPE;
  t_tab tab_type: = tab_type();
  pragma exception_init (xmlparseerror,-20100);
  l_node_name varchar2 (300);
  
  Start
  l_parser: = dbms_xmlparser.newParser;
  l_doc: = DBMS_XMLDOM.newdomdocument;
  dbms_xmlparser.parseClob (l_parser, l_clob);
  l_doc: = dbms_xmlparser.getDocument (l_parser);
  l_n: = dbms_xmldom.makeNode (l_doc);
  
  l_nl: = dbms_xslprocessor.selectNodes (l_n, ' / TaxInvoice/TaxInvoiceDocument ');
  
  FOR cur_tax in 0.dbms_xmldom.getLength (l_nl) - 1 LOOP
  l_n: = dbms_xmldom.item (l_nl, cur_tax);
  
  t_tab.extend;
  
  t_tab (t_tab.last) .ed_id: = '5000000';
  
  dbms_xslprocessor.valueOf (l_n, ' IssueID / text () ', t_tab (t_tab.last) .tid_issue_id);
  dbms_xslprocessor.valueOf (l_n, ' TypeCode / text () ', t_tab (t_tab.last) .tid_type_code);
  
  END LOOP;
  
  FORALL i IN t_tab.first... t_tab. Last
  INSERT INTO xml_upload VALUES t_tab (i);
  
  COMMIT;
  
  dbms_xmldom.freeDocument (l_doc);
  correct: = true;
  
  exception
  When xmlparseerror then
  -xmlparser.freeparser (l_parser);
  correct: = false;
  error: = sqlerrm;
  
  end insert_table;

  l_nl := dbms_xslprocessor.selectNodes(l_n, '/TaxInvoice/TaxInvoiceDocument');
  

  try to change as follows

  l_nl := dbms_xslprocessor.selectnodes(l_n,'/TaxInvoice/TaxInvoiceDocument','xmlns="urn:kr:or:kec:standard:Tax:ReusableAggregateBusinessInformation:1:0"');
  

  Published by: Alexandr on August 17, 2011 12:36 AM

• Back to zero/recalculate value if the element with dynamic action

  Hi all
  
  What I have is a part of "total amount". When the other elements on the form are filled, these values are subtracted from the total. My problem is that when a few points to say a filled out, but then set to zero, the figure in the total does not reset. If no new figure added, are more excluded.
  
  For example:
  total = 10
  Value of 1 changed to 5. Total = 5.
  Value of item 2 changed to 1. Total = 4.
  Value of 1 changed to 2. Total = 2.
  
  I find it tricky is because the total is derived from an action of current setpoint led other points. Finally, I would like to reset or re - run the calculation for the total, without duplicating the original action of the set value. I tried to use a dynamic action "Refresh" but I don't think that work in this way. Is there another way?

  Why not save the original value to an item hidden page (or even in a global variable set before you run the JS calculation for the first time in javascript).
  During the reset, set the value of the element with the value of the hidden (or variable).

• Branch to the Page identified by the element with parameters

  A certain page we originally had a 'branch at or the Page URL' that has parameters associated with it (which one who reset the element on the page the branch goes back to the current value of the item page before branching him given that this necessary element to stay with the current value of population but was erased when he branched out) but now I have a new Application process that defines an element of the request for the page that should be branched to.
  
  Since Apex does not recognize the elements of the Application in a "branch of Page or URL", I need to create a "branch of Page identified by Item", the problem is that there is no "Set these elements" "with these values" with this type of branch or the option to include parameters in a URL target. I already tried to use the "branch Page or the URL" with the Application in the URL element, but that no longer works.
  
  Any suggestions on how I might branch to a page based on an element of the Application (if not this way, somehow creates a branch to a page based on a value in an application process) with the settings?
  
  What does not make sense to me, is that you could create a branch to a Page with a value of Page element with parameters defining the elements with certain values, but you can do this when identified by the item or it is not yet Application_Items in a Branch_to_Page/URL.
  
  Thank you in advance,
  -Brian

  Brian,

  Have you tried to use the Type of the branch "Branch to the Page identified by the (name of the use element) element" and put the name of your APP_ITEM like

  APP_ITEM

  ?

  This should work for you.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• Update the elements of pl/sql with variable name?

  I want to be able to update some elements of pl/sql page.
  
  for example can you do with apex as you can do it with vb
  
  --------------------------------------------------------------
  
  for I = 1... 10
  
  :var_I:= I; <-this is my problem how do I update: var_1 with 1... : var_2 with 2... etc...
  
  end loop;
  
  ---------------------------------------------------------------
  
  How can I do this?
  
  Published by: user13102891 on 05/10/2010 18:15

  Something along these lines should do

  for i in 1..10 loop
    apex_util.set_session_state ('var_' || i ,i);
  end loop;
  

  useful references

  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14261/controlstructures.htm#sthref945
  http://download.Oracle.com/docs/CD/E14373_01/apirefs.32/e13369/apex_util.htm#CHDBGEEC

  CITY

• Select the element on a form as a table with a different dynamic LOV on each line

  I would use a tabular form when one of the columns is a Select based dynamic LOV, and where this is dynamic LOV refers to a column on the values in each row.
  
  So if the tabular presentation was a list of teams and the column selection LOV was the current head of the team, I would like to than this selection list to be filled only with the members of this team (different for each line). As the list of the members of the team is in a different table (all_players or something) I won't fill the LOV with a query with a where clause clause that only selected records of players from team-membership equal to the id of the current team tabular form. Thus, on each line the content of this list would be different.
  
  -Justin

  This is explained here:

  http://HTMLDB.Oracle.com/pls/OTN/f?p=31517:176

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Select the element hidden with ajax

  I need set the value of an item hidden on my page of in a javascript function, without submitting the page. I think that the best way to do it is using AJAX. After doing some research on this forum I came up with the code below, which doesn't seem to work. It's probably not that simple, but it is the code (in a javascript function):
  
  
  function setItem (imgid) {}
  document.getElementById("P186_IMAGE_ID").value = imgid;
  }
  
  It does not work. What Miss me?
  
  I can do:
  
  $x('P186_IMAGE_ID').value = "test";
  doSubmit();
  
  but that submits the page and I don't want to send the page.
  
  Thanks in advance!
  
  John

  Try this function in the header HTML of the page with the hidden item...

  Thank you

  Tony Miller
  Webster, TX

  What happens if you were really stalking a paranoid schizophrenic... They would know?

• Select the list with the list of dynamic values with more than 4000 tank of query

  Hello
  
  I have no application where users can store SQL queries in a CLOB column. This query is then used to populate the list, select a dynamic element through LOV. Following the code returns the query for dynamic LOV used to populate the select list. It works fine except when the length of the lv_sqlStatement becomes more than 4000 characters. Then application crashes with "ORA-06502: PL/SQL: digital or value error: character string buffer too small" when Select the list item rendering.
  
  Any ideas how to get around this problem? Any help is appreciated. Do not say to them to write shorter than 4000 queries because I can't (it's operational requirements).
  
  DECLARE
  lv_sqlStatement end_user_set.sql_statement%type;
  BEGIN
  lv_sqlStatement: =: P2_SQL_STATEMENT;
  return ' select the label, value of (' | lv_sql_statement | t ')
  To_char (t.value) if not in (select value from end_user_set_member eusm)
  where eusm. EUSRSET_ID = ' | : P2_EUSRSET_ID | ')';
  END;

  I just blogged about this problem and posted a solution. See this announcement:

  http://www.deneskubicek.blogspot.de/2013/03/select-list-with-dynamic-lov-and-Ora.html

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Copy columns from one Table to the other with PL/SQL in Apex

  So my goal long-term is to throw this PL/SQL statement in a trial DMBS_SCHEDULER Apex 4.1 to create historical snapshots of the data a week but I'm hooked on this code:

  declare
  V_DEKIT_ID varchar (255);
  V_NT varchar (255);
  Number to resume;
  Date of V_DDATE;

  Start
  for DEKIT_ID in (select * from DKT_HIST)

  loop

  Select DEKIT. DEKIT_ID in V_DEKIT_ID of DEKIT;
  Select DEKIT. NT in DEKIT V_NT;
  Select DEKIT. QUANTITY back of DEKIT;
  Select CURRENT_DATE in double V_DDATE;

  insert into DKT_HIST (DEKIT_ID, NT, QUANTITY, DDATE)
  values (V_DEKIT_ID, V_NT, V_QUANTITY, V_DDATE);
  end loop;

  end;

  I enter this code in the SQL prompt in the SQL workshop and it is said that she is treated, but when I look at the destination table (DKT_HIST), there is no data. Any help would be appreciated.  In this code I want to copy the three columns of the DEKIT table as well as the current date and copy them to DKT_HIST for each row in the table DEKIT.

  Thank you

  -Steve

  The reason why your code did nothing is probably because your loop, using the history table. And since there no data in the historical table first, there is nothing to loop.

  BUT!

  Good code is the task with the least possible effort. Which in your case should result in a code similar to this:

  begin
     insert into DKT_HIST (DEKIT_ID,NT,QUANTITY,DDATE)
     select DEKIT_ID,NT,QUANTITY, trunc(sysdate)
     from DEKIT;
  end;
  

• Select the query with the level line list where the clause

  Hi all
  
  I am creating a tabular presentation based on a SQL query that has a list of selection based on a query with a where clause clause that refers to a column in the original SQL query.
  
  The situation is, I have a table that stores the client_id, source_id, and build_id, lets call it client_source. I have a second table, build_source, containing source_id and build_id, one to many relations between the two (1 source_id could have build_id 1-7).
  
  Using a tabular presentation, I want to select the correspondent build_id to use in client_source, but the selection list should contain only the build_id for this particular source_id of lines.
  
  Here is an example of the SQL source of tabular presentation;
  
  Select
  s.ROWID,
  s.CLIENT_ID,
  s.SOURCE_ID,
  APEX_ITEM. SELECT_LIST_FROM_QUERY (1, s.BUILD_ID,)
  "Select display b.build_id, b.build_id return.
  b build_source where b.source_id = s.SOURCE_ID ') lst
  of s client_source
  
  what I want to achieve, it's as source_id "BOLD" match fields. When the query is built this way, I get an error of "invalid identifier" Oracle on s.SOURCE_ID during execution.
  
  Is there some special tags to be used to refer to the external column? I must be missing something because this looks like a pretty mundane problem.
  
  I am running on 4.1.0.00.32, on an Oracle 10 g release 10.2.0.4.0 Server Express request.
  
  
  I look forward to useful responses!
  
  
  See you soon,.
  Jason
  
  Published by: 1005131 on May 9, 2013 19:02

  Your selection by query list receives a static SQL. That SQL can't "see" the value of your s.source_id.
  But it would work like this:
  where b.source_id = ' | s.SOURCE_ID)

  You would be the value for the SQL concatenation. It is not ideal, but it will work.

  Jorge