Selection of the ball is too small to see.

Similar Questions

• Restore complete PC - either does not start or before restoration, said "the disk is defined as active in the BIOS is too small to recover the original system drive."

  I am trying to restore an image backup Vista 64 is 428 GB, the drive under restoration is a Velociraptor 2x300GB RAID 0 (about 558 GB under Windows), and the drive on which the image originated was is labeled as a 750 GB drive (actually about 698 GB / 433 GB used). When I first made the attempt I got some message on the target drive, have to be cleaned by diskpart, so I did. After that, I was able to complete the restoration - but after the restoration, at startup, I get the message:

  "Reboot and select proper boot device or insert boot media in selected bootable media and press a key.

  And under Windows, the drive does not appear. Disk Management displays the disk as unallocated space. So I added a new Simple Volume and then tried the new restoration. But now I get the message:

  "The drive is set as enabled in the BIOS is too small to recover the original system drive."

  Even if the restore completed successfully after cleaning, the drive is empty, and the player has more than 100 GB more space than the size of the image. After the restoration after the own, why can't it detect the boot sector; and if I try to restore after formatting, why do we say that the disc is too small? How can I successfully restore?

  Hello

  We can see the suggestion of Ryun on the link below and check if this helps solve the problem.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/9a968d83-Ca5a-4a71-85e2-a013d209c713

  See also:

  http://TechNet.Microsoft.com/en-us/library/cc754015 (WS.10) .aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a 22 inch monitor set to 150%, but since I installed Firefox, the font is too small and the screen is too small. Cannot enlarge font or screen. I can do control ++ whenever I have enter a page but don't want it as my solution.

  Control/display panel, I got my screen set at 150% and a resolution of 1680 X 1050. It filled my screen 22 inch with the content of the page. Now that I have installed Firefox, the police is too small and the content is centered in the screen leaving about3"each side of the space empty. I want to fill the screen and make things bigger. Have not found a way to do it. Firefox tells me in my window/display of the control panel that setting my display at 150%, ' some elements may not match your screen if you choose this setting if your screen is positioned on this resolution. " It worked fine with the Explorer.

  To help other users find solutions, please come back to this Thread and connect you to the

  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• Exception occurred in the Microsoft Access database engine: the field is too small to accept the amount of data you attempted to add.

  Hello

  I try to save a path in a table in an access database, but an error occurs:

  "Exception occurred in the Microsoft Access database engine: the field is too small to accept the amount of data you attempted to add." Try insert or paste less data. "in create a NI_Database_API.lvlib:Rec - Command.vi-> NI_Database_API.lvlib:Cmd Execute.vi-> NI_Database_API.lvlibData.vi B tools insert-> project total.vi.

  I've attached a JPEG of a part of the code and the code, but it won't work because the database is not attached,

  any help please?

  Ok

  I solve the resized problem.i column size

  Thank you

• When I play games on pogo or facebook window pop up to play the game is too small.

  Original title: popup screen too small__

  When I play facebook or pogo games windows is too small to access all the button to play the game.  It was ok earlier in the day, but now the screens are too small.  Is there a way to revert to the original?

  Hello
   
   
  1. what the text on the Web page? Is it too small?
  2. is it a problem with these two games only? Have you tried to play another game on facebook?
  3. what Internet browser are you using to play these games?
   
   
  Method 1.
  You can try the following steps and check if the computer gets you the expected size of the screen.
  a. once the pop-up window click on it.
  b. hold down the button and use the mouse wheel to scroll and check if it changes size.
  
  Method 2.
  If the problem is different I would ask you to send us the screenshot of the problem.
  Follow the tutorial below to download the screenshot.
  http://social.answers.Microsoft.com/forums/en-us/vistaassistant/thread/ca5463aa-ec2f-4497-8cc4-cfe7fd5861e6
   
  Looking to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The games are too small

  ahki,
  We need more specific information on this issue.  Please see the sticky note at the beginning of the forum with the necessary information and after return.
  What to post in the forum games
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Mike - Has microsoft to offer a 'solution' to this problem.  I have Club Pogo, everything goes well on the main screen, but the games are too small and I can't fix.

  drm0051,
  You need to check the link for the citation.  We need more information to try to help out you.  If this only happens with Pogo games then you need to contact Pogo support, because this may be a known issue that they have a patch\fix for.  One thing I can say, it is to check that your Java is updated to the latest version. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you move the cursor, rather than move, the police often changes a size big or too small to see.

  Original title: "when I try to move the cursor, instead of move, the font size often changes to a huge size or one size too small to see. In addition, it can jump to the top or the bottom of the page. »

  More I use Vista, more I hate it!

  It came pre-loaded on my Fujitsu Lifebook. I had heard talk were many complaints about Vista and I wanted to stay with XP or Windows 7.  Each manufacturer of the laptop has been unfortunately Vista preinstallation.

  • When I use the word processor Works Windows, sometimes without warning he automatically becomes italic police without any input from me.
  • If on Windows works WP or on any page of e-mail online, when I starts to move the cursor, a little 'target' - as the icon appears when the cursor was and, either changes in font size of microscopic or 500% or more.
  • On the Internet page of wole can shrink or get huge.
  • At other times, with one touch of the mouse or touchpad, rather than the font change, the cursor may disobey my entry and the end to the top at the bottom of a page where I won't be, or somewhere else. When I get back to the expected location, it can repeat the same action three or four consecutive times before to behave normally again.  This makes typing manuscripts or very frustrating messages sometimes, not to mention a lot of lost time.
  • When you try to type copy from a printed script, if I don't keep control of the screen I can finish with margins stange, italic where they belong or phrases that are moved where they belong.
  • Sometimes when I'm trying the high - lite a word or phrase so I can drag it to another location, it will refuse to high light, making necessary use rear brace to delete the words I want to drag and retype the words to the new desired location.
  • Another problem is that the will of cursor down stubornly and turn several times since the location of the Center to the extreme side so that the rest of the page is covered.  Vista seems to have a mind of your own.

  This set of problems seems to migrate from MS Word to MS Works, Web pages, and e-mail message composition.  I thought it was the new computer initially. I even returned it to Fry's electronics for maintenance two times.  I mean, they just excanged for another new Fujitsu Notebook.  When I got home, the replacement computer have behaved in the same way, which indicates that it's the software, not the hardware.

  Funny thing - now that I complain on this topic in this forum and have written this much, it doesn't have behaved badly again!  The ghost of Vista must have been scared and went into hiding.  ;-)

  Yet once more I use Vista, more I hate it!  -especially since I was in the middle of writing a book for publication.  In light of the frustration and the loss of my precious time because of these persistent bugs in recent months, I wish MS would trade my copy of Vista for Windows 7.  MS seems to be getting a reputation for releasing Beta quality software and call it a finished product.  You would think that MS wakes up to the fact that consumers expect to have for their money.  Everyone has the same problems?

  Are there realistic solutions out there?    Hmm, no spell no checker on this page.  Sorry for the typos. :-)

  You can get in trouble with your mouse device drivers, firmware and/or software.  This may be due to a Microsoft Update or any number of things (and could have happened to these two machines, if you did the same thing in both cases).  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get for your mouse at the very least and I consider the keyboard as well and make sure they are compatible with your device, and your version of Vista) and all you have time to do - they can help way beyond simply solve this problem) leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Also, your mouse may have the functionaality to change the font sizes and jump from one end of the screen to another by doing some things.  Read the user manual and/or research through start / Control Panel / mouse to see if this is the case and if so, it may be able to be disabled.  The problem with some of these "features are that if you don't know about them they can cause difficulties when they activate for apparently no cause when you actually not what caused the feature must be enabled." It took me a while to realize the CTRL-0 would change my IE screen at 100% size and I first thought there was something wrong until I discovered the problem by chance.  I say that, because the odds of two computers with the same exact defect are astronomical - it looks more like a problem as described above or a certain type of function you are unaware of (perhaps in combination with a keyboard input that is why I suggested that you update those as well).

  I hope this helps.  If not, I am sorry to say that your best option would be to go back again to see if they can reproduce the problem (you use your way computer in case it is something you do) and either repair or replace again (or change to another computer entirely).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Everything on my Hotmail and the words are too small to read. How can I make it bigger?

  Original title: HOTMAIL

  Everything on my Hotmail and the words are too small to read. How can I make it bigger?

  Have you tried the CTRL + mouse scroll wheel?

• The font is too small in the Mail application

  Original title: you're kidding?

  The font is too small!  Micro$ #! ^ has screwed up again.

  Hello Ranman81,

  If you have a touchscreen simply move your fingers apart, which increases the size of the text, or use the keyboard shortcuts for zoom in or out. Here is a link to the touchscreen and keyboard features:

  http://Windows.Microsoft.com/en-us/Windows-8/new-keyboard-shortcuts#1TC=T1

  http://Windows.Microsoft.com/is-is/Windows-8/touch-swipe-tap-beyond

• The fonts in the toolbar is too small

  • My computer's resolution is 3200 X 1800
  • After installing the new Photoshop CS6, I found the fonts in the toolbar is too small.
  • How can I solve it.

  What operating system do you have?

  If windows, this might work:

  http://www.danantonielli.com/Adobe-app-scaling-on-high-DPI-displays-fix/

• Google calendar appears too small to see in windows 8.1

  While in the past google calandar was normql, now in firefox is too small to see. This happens in every night and firefox but not on opera. I use windows8.1 on laptop. everything else is normal.

  Check that you did not Zoom in the Page 'out '.
  This can happen quite easily if the user keeps the CTRL key and use the mouse wheel to scroll the page.

  https://support.Mozilla.org/en-us/KB/font-size-and-zoom-increase-size-of-Web-pages#w_zoom-in-and-out-of-a-website

• Download progress when add on is much too small to see clearly

  Hi I'm add it on with the little box showing the download progress is far too small to see clearly.
  Very difficult with discoloration and uncomfortable sight see. Something 20 mm wide and 20 mm of height would be a good start to improve this.
  Thank you very much

  Paite

  A big thanks to jscher and all the world

  Best regards
  Paite

• This site (only so far) shows us all of a sudden too small to see. Zoom?

  Web site: bensbargins all of a sudden one morning appeared in a tiny version too small to see. In Windows, there is a zoom button, which is what he seems to need. Is there a zoom on the screen somewhere?

  CTRL + (plus) or CTRL + scroll wheel

  CTRL + (Zero), to restore the original zoom

• The Central handle on the rectangle isn't gone when I select with the black arrow (v) tool. See the bounding box and the edges is both. Dd intermediate anchor to go?

  The Central handle on the rectangle isn't gone when I select with the black arrow (v) tool. See the bounding box and the edges is both. Dd intermediate anchor to go?

  haggyabeken,

  I'm afraid that you have come across the Rectangle Live bug, which is limited to MAC versions starting from 10.7 and 10.8, but not 10.9 (Mavericks), see this thread linked below.

  https://forums.Adobe.com/thread/1595973

  Thus, a switch for the Mavericks with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587

• Computer is turned off, online the page in the window is too small. Can not get it back.

  I turned computer, went online and home page is so small, I can barely read. The window itself covers my screen, but the page is in the middle of the screen of the window, 10 sizes too small. I visited all the Web sites were similarly. This page also. I tried to adjust it myself, but it changed nothing. The display settings have not changed that I am aware, so with the same settings as always, I didn't really know what to change. I tried to use the system restore, but that never worked when I tried it in the past. Indicates an error has occurred and cannot complete. I'd appreciate any help. I'm an amateur, where computers are concerned, but I can get around pretty good if I have good instructions.   Thanks in advance for any help!

  FYI - HP desktop, Windows Vista, IE8

  You might try to go in the Tools menu in Internet Explorer, then Internet Options, then advanced and select Reset.

  Restores system will fail if you have Norton and do not turn off "tamper protection '.