Selectively running Tests
Hey all,.
My goal is to build a UI that will present a tree of all my cases/suites available test and that the user can choose which tests they want to run.
I need a boost in the right direction as to the best way to start a program to build partial test suites while keeping all the functionality of large metadata in my test FU4 adds case. Any suggestions?
Thank you!
Brian
Brian,
The docs are not to do this again, but if you take a look at the static class application it allows you to catch pieces of classes or filter them in order to create an "application" which is really a sub group of tests.
For example:
Request.Method (TestTwo, 'testTwo3')
Mike
Tags: Adobe Open Source
Similar Questions
-
Firefox does not seem to recognize that my account has administrative privileges on my computer. I tried to create another account with administrator privileges and it was also impossible to install Firefox.
I also had the same problem...
Right-click the installer and select "run as Administrator"
It works very well...
If you have a problem... -
SQL > select lower (sysdate + 1 |) (' test') twice;
LOWER (SYSDATE + 1
---------------
07 jul-2014test
SQL > select lower ('test' | + 1 sysdate) twice;
Select lower ('test' | sysdate + 1) of the double
*
ERROR on line 1:
ORA-01722: invalid number
The query fails because it cannot perform arithmetic (+ 1) on a channel not digital. However, the query that successfully interpreted the arithmetic in the first place, that it concatenated the string 'test' to it... Make sense?
-
Right-click DeptEmp.jsf and select run from the context menu
Hello
Please consider article Oracle Magazine "Catch Me If You Can ' Frank Nimphius
at http://www.oracle.com/technetwork/issue-archive/2013/13-mar/o23adf-1897193.html
In the article, it is offered several times to
«... Right-click DeptEmp.jsf and select run from the context menu...'.»
When you use JDeveloper 11.1.2.3.0 it will result in JDeveloper starting a browser requesting a URL "/ faces/DeptEmp" (without ".jsf").
(Note that in the sample adfc - config.xml has a view with the id "DeptEmp" activity, but for pages without an activity view corresponding to the stream of unrelated task (adfc-config.) (Xml) JDeveloper starts a browser requesting a "/ faces/otherPage.jsf" URL (with ".jsf").)
Still, I wonder if we should really run (JSF) pages, or rather an activity view in the flow of a task?
After running into issues with calling (JSF) page URL rather than controller unbounded ADF task flows view activity URL in another forum thread [1], I try to avoid pages (JSF) (execution of the task-flow unlimited instead) running.
toJohn Stegeman wrote:
But also the Oracle documentation seems to suggest that page running a (JSF) is the way to go (or "a" way to go), see the section "41.2.1 how to run an Application in Integrated WebLogic Server "
... especially since it is very common for people new FAD (and indeed no-so-news-to-ADF people like me) to run their app via a page rather than the workflow and then wonder why it does not work :)...
saying: ""in the navigation Application, select the project, a task flows, JSF page or file as the target execution. ".
at http://docs.oracle.com/cd/E37975_01/web.111240/e16182/deployment_topics.htm#ADFFD22047
So, who is? Is there a preferred way to run? Running a (JSF) page "also recommended"?
-[1] ' login after logout is not possible using af: commandButton.
during the connection after disconnection is not possible using af: commandButton
Thank you very much
Jan VerveckenHello
Still, I wonder if we should really run (JSF) pages, or rather an activity view in the flow of a task?
The recommendation is to run the activity. I think it's just my laziness to boot from the JSF file in the case of the article (and given my article only has a single page in the workflow unlimited I wonder if my attempt failed, if there was a need for a navigation to another view in the flow of unlimited work). The risk from a page directly, it is a physical implementation of a view that could be used by multiple streams of different tasks (although the common use of the stubborn workflow is to go with fragments of the page, always bounded task flows could be defined using complete documents). His recommendation that you start an activity to view pages in order to ensure the ADFc is used (I wasn't even not aware of 11.2.3 to automatically change request activity instead of the file if there is an activity of referencing).
Frank
-
Running tests of OpenScript in OTM
Hello
I added an OpenScript form functional script in OTM and when I click on "Run test", and I see no action. In the history of the race, OTM shows in the 'Results' column that the test is 'Running', although more than hour elapsed since the beginning of the test to run.
I tried: OTM System Manager (Tools-> systems) and enterd my windows account password, but
It still does not work.
Can someone advise something?
LEAOk. Doing a job that is running the service as a console application?
Jamie
-
FlexUnit ant - running tests that make calls to the server
Hello
I am using BlazeDS in my project to connect to a Tomcat server. I have configured my services in the file services - config.xml and past the location of the file as an argument to the compiler in Flash Builder.
I have some unit tests that make calls to the asynchronous server. When I run these tests from Flash Builder, the thin running tests. But when I run the tests via the flexunit ant task, these tests only downtime while the other tests pass. In addition, it seems like the server is contacted at all as my messeges newspaper in my code aside server are not visible.
I tried passing the path to the file services - config.xml and the root of the application context in the mxmlc Ant task that compiles my TestRunner.mxml file:
"< mxmlc file="${main.src.loc}/flexUnitTests/TestRunner.mxml "output="${bin.loc}/TestRunner.swf ">"
< dir = "${lib.loc library path}" append = "true" > "
< include name = "*.swc" / >
< / library path >
< element path-source-path = "${basedir}" / src "/ >"
< element path-source-path = "${basedir} /locale/ {local}" / >
< compile .verbose-stacktraces > true < / compile .verbose-stacktraces >
true < compile .headless-server > < / compile .headless-server >
< compiler.services > C:\myApp\Source\WebServer\WebContent\WEB-INF\flex\services-config.xml < / compiler.services >
< compile .context-root > myApp < / compile .context-root >
< / mxmlc >
No use. My tests still expire. Here is my flexUnit task:
< target name = 'test' depends on 'compile' = >
<!-run FlexUnit tests and publish reports->
< flexunit
" swf="${bin.loc}/TestRunner.swf ".
workingDir = "${bin.loc}" "
toDir = "${report.loc}" "
haltonfailure = "false".
verbose = "true".
localTrusted = 'true '.
headless = "${headless}" >
< source dir = "${basedir} /locale/ {local}" >
< include name = "*.properties" / >
< / source >
< dir = "${lib.loc library}" / > "
< / flexunit >
I guess I'm missing something - a way to tell Ant about the location of my server or something like that. Help, please!
Thanks in advance.
Maury
or create a config replacement for testing services. It would be able to resolve the server url if the swf file served from a web server.
-
Hello
I am very new to TestStand, please see the question below and give advice.
I want to set up a simple test sequence.
I want a message to popup on the screen that asks the operator what unit of 6 units (maximum 10) to test (i.e. There is say box of 6 to 10 s to select from).
Then the sequence goes to the specific part of the sequence and performs the test on a unit that either has been selected.
What is the best way to do it?
I use pop-up message windows to do this? and if so what should I connect to the correct part of the sequence file?
Pop-up message windows allow only 6 options to select from?
Thank you
Hello
You can do this by using the method of message popup. You can ask the user what unit want to run message by inserting in the expression of the message in the message popup step parameters. Something like below
"Enter the number of execution unit.
1 Unit1
2 unit 2
.......
10 Unit 10 "
then check the 'Enable response text box"tab is different from the stage. When the user enters the unit number you can get the value entered by the user by inserting the below statement post expression of message popup step parameters
Locals.String = Step.Result.Response
Note: The string is a local variable to be set.
Convert string to number and send that output to pass the expression you can use a sequence of call step to call the sequence according to which must be performed. (I hope your each unit will file separate sequence)
I hope that this solves your problem. If you do not understand please let me know so that I can put a small example and send it to.
See you soon,.
Krishna
-
One day, no sound from any type of place, radio, ecards, Facebook, etc. Everything about sca and troubleshooting ok. ??????
Hello
Try these steps, let me know exactly what happens after each.
No sound
If Windows Media Player seems to work fine, but you cannot hear the audio, you will have a problem with your speakers or sound card. Check all audio connections if you are using external speakers and to ensure that sound levels are defined correctly and not cut. Use Device Manager to make sure that your sound card works correctly and is selected as the audio device by default.
Verification of the sound settings
Click on Start , then Control Panel
Select the material and audio and noise
Under playback.. What icons you see?
Click Properties and then click headset/speakers
According to the levels... is at 100% and not CUT?
Under Advanced... What is the default format?
Click test... do you get a sound?Look for the old drivers Device Manager and update
Drivers can become outdated and could be damaged to the point where they slow the system performance. Looking for the old drivers Device Manager, follow these steps:
Click Start, click Run, type the sysdm.cpl in the Open box, and then click OK.
Click the Hardware tab, and then click Device Manager.
Right click on the device, and then click Properties.
Click the driver tab.
Compare the version of the driver on the tab, with driver version information on the latest version of the driver that is published on the website of the manufacturer.
To resolve problems that are caused by corrupted or outdated drivers, install the latest drivers:
Click Start, click Run, type the sysdm.cpl in the Open box, and then click OK.
Click the Hardware tab, and then click Device Manager.
Right click on the device, and then click Properties.
Click on the driver tab, then click on set to update driver.
Follow the instructions on the screen to complete the update of the driver.
b Eddie -
How to play only the selected on 'test' images / listen to music on 'play '?
I use Adobe Flash Pro 2015 CC and I do a long animation (about 5 minutes) when I synchronize the frames to the song in the background. If I press on "ctrl + enter" and test the movie, then it always starts from the beginning no matter what I try. If I hit enter and play the animation, then it starts from where I want it, but no music can be heard.
Preferably, I'd like to be able to listen to music when I click on play, but if this is not feasible (I know 'play' has its limits) so I wish I could at least 'test' try it with only selected images. (I want to all both know anyway for future use)
Nevermind, I found the answer online. I needed to do a right click on the layer of the music, go to properties, and under 'her', I changed the option to synchronize the 'event' 'Stream '. The music is heard now when I click on enter/read.
-
run tests through agent of OATS
Hello
I decided to run my tests via agent of OATS (before i run on OTM).
So I added these lines in the batch file:
C:/OracleATS/agent/RunScript.bat false C:\OracleATS\OFT\test1.jwg of noReport - of - resultReportFolder C:/result
C:/OracleATS/agent/RunScript.bat false C:\OracleATS\OFT\test2.jwg of noReport - of - resultReportFolder C:/result
C:/OracleATS/agent/RunScript.bat false C:\OracleATS\OFT\test3.jwg of noReport - of - resultReportFolder C:/result
but batch executed ONLY the first test, what I have to do here to run all the tests?
any ideas?
-
After Installing SDK on Windows - cannot run test scripts
When I try the first test run svmotion.pl I get "libxml2.dll' not found, I downloaded it
now I have "the procedure entry point not found xmlTextReaderSetSchedma in the dynamic link library libxml2.dll."
There's a problem with the installation... I just download it.
If you have a previous installation, edition and then download the vCLI: http://www.vmware.com/support/developer/vcli/ which will include the vSphere SDK for Perl + scripts/additional services. Just give it a shot and see if you can make it work
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
Introduction to the vMA (tips/tricks)
Getting started with vSphere SDK for Perl
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
change the setting in the unit test and click on run test does not chan
In the details of the implementation of the test Panel, if I change the input or a result parameter and click on run the test without losing the focus in the first place, my change is lostThis has been fixed and will be available in the next version of patch.
Brian Jeffries
SQL development team -
reads the data when I select run
When I insist on running my program reads the data from the meter power... when I'm not it gives me an error. I tried to put right waiting them etc and nothing seems to be set. Also, when I take the vi that read data from the electricity meter, the code runs much faster. I don't know if this has to do with global variables or what, but I just change a code supplied with this unit and it included global variables. I tried not to play with those yet. Anyway, if someone sees something that would eventually cure this problem please let me know. Thank you.
-
the 2nd time that something important has occurred 7 MOS iv had my new computer i belive this computer is a silt and request that replace you it with a computer brand new everything like I asked you for the last time that the reason that I am typeing down heer is custom let me type through the above as I was abel to is another question I spent hundreds of dollars trying to keep this computer running ever time I buy I thing that sets then they want me to buy something eles I used think that H.P. is back at the top of the line equp but since I've learned what it takes to get to the factory even if you total care extended warranty or Exchange a silt which is under warinty for a new computer I don't think that I buy more products you people act as a group of men selling used car that you intend to do to solve the problems to this computer
Sorry, but this is a user-to-peer support forum. HP maintains no official presence in this forum. Any response that you receive from an employee of HP is a non-official communication and not made on behalf of HP.
I suggest contact official channel of HP for repairs in your area and have the problem of lift for a senior case manager. You can also send a copy of your message to user / HP used 'HardBeatZ' via the forum private message feature.
-
I have windows vista Home premium SP2. When I try to download anything I get the usual dialog box to give me options toRUN or to RECORD I tried to download using both perform and record. If I select RUNfile will download completely, I watch it go all the way to 100%, then the dialog box disappears and nothing happens. If I selectSAVE, same thing I can look at the file download 100% and then it does not appear in the destination folder.
I tried selecting the destination as a desktop or different folders. I disabled user account control and I also tried to create a new account. I have also made sure that I use the admin account. I use IE8, and have also tried to reset the default browser.
The last thing I would do would be to restore to a point, when this was not the case, but I have no restore points available. I just noticed that I had a problem when I discovered that Microsoft Security Essentials icon disappeared and I tried to download it again, I went on my laptop using another computer and a USB key. After scanning, there is no virus so im lost of ideas now.
Someone out there has a solution to this problem.
Suggestions:
1. determine if your user account is corrupted or not.
Create another user account (assuming that it would be another admin account). Log on to this new account, do a download/install. Use option record and see if it get saved in the destination folder.
If the answer is Yes, then your old admin account is corrupted.2 make a check of the file system. See if it finds corrupted files and see if it can fix them.
In the end, it will tell you either...
"no breach of integrity", or
It finds files corrupted but unable to fix them.
Try to install again and see if the problem is now gone.File system check... sfc/scannow
Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
Note: there is a space between 'sfc' and ' / '.
To sit and wait. It will take time.
When finished, exit the cmd window.
Reboot (restart your computer)For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
Maybe you are looking for
-
App Store won't let me not re - download the Setup file of Yosemite
Attempted to install Yosemite with my file previously downloaded from the App Store. Error message indicates the file cannot be verified. go to App Store and download. App Store says "downloaded" and does not allow me to download again.
-
How can I remove the email notification in the Windows 7 login screen?
opening start screen When I turn on my computer at the beginning to start click on user name in my name says 464 emails unread how rectify this. Regards Mike Robson
-
What people use these days, instead of "Limewire".
Hope that's not shocking for everyone here. If this is the case, I'm sorry. Everything I download says I need a license to liisten to the song and takes me to a page on the net for a download. I install the program, and still nothing happens. Any ide
-
How can I check if the hardware works correctly?
How can I check if the hardware works correctly?... including fans, hard drive, cd players, etc...
-
I have Windows Vista, can not connect, is the file 'another user '.
Hi, I have Windows Vista Ultimate Edition. my computer restarted somehow while I was with her and now the only way I can connect is a folder named "other users". It asks me a username and password but I don't know what it will be. How can I solve thi