Help: Configure the simple test sequence, operator selects particular test connects to the part of the teststand sequence file and then performs the test
Hello
I am very new to TestStand, please see the question below and give advice.
I want to set up a simple test sequence.
I want a message to popup on the screen that asks the operator what unit of 6 units (maximum 10) to test (i.e. There is say box of 6 to 10 s to select from).
Then the sequence goes to the specific part of the sequence and performs the test on a unit that either has been selected.
What is the best way to do it?
I use pop-up message windows to do this? and if so what should I connect to the correct part of the sequence file?
Pop-up message windows allow only 6 options to select from?
Thank you
Hello
You can do this by using the method of message popup. You can ask the user what unit want to run message by inserting in the expression of the message in the message popup step parameters. Something like below
"Enter the number of execution unit.
1 Unit1
2 unit 2
.......
10 Unit 10 "
then check the 'Enable response text box"tab is different from the stage. When the user enters the unit number you can get the value entered by the user by inserting the below statement post expression of message popup step parameters
Locals.String = Step.Result.Response
Note: The string is a local variable to be set.
Convert string to number and send that output to pass the expression you can use a sequence of call step to call the sequence according to which must be performed. (I hope your each unit will file separate sequence)
I hope that this solves your problem. If you do not understand please let me know so that I can put a small example and send it to.
See you soon,.
Krishna
Tags: NI Software
Similar Questions
-
The video is normal until I got down the clips in the sequence 01, and then they are severely cropped on all sides. Should what setting I be wrong?
Hi Brenda44,
Please, do a right-click on the item in the project Panel, and select new sequence Crter option to create a sequence according to your clips.
Kind regards
Vinay
-
Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.
Hello
Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.
Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.
Thank you
-
When I click on 'File' and then 'new' it keeps open a new file as a layer and not a background. The RGB mode is selected.
With the new files to open as a layer and not a background, I'm not able to create multiple layers and it won't let me convert the background layer.
How what happened. I've used PS yesterday and had no problem. Today, my computer did updates mandatory day and now this.
Yes. You use the option of Pixel of the Ellipse tool. He's so setting pixels as it is supposed to do without creating a layer.
Choose the option to the form:
Also the menu layer > new layer creates layers and paper rolled up at the bottom of your layers palette also creates a new layer. I hope these work.
-
Why my PC cuts her Internet connection whenever I try to open a PDF file and how can I fix the problem? Even if I still have my cell phone internet access will not open a PDF document online.
Hello
· What operating system is installed on your computer?
· What browser do you use to access the Internet?
· It happens with PDF files or file as well?
I suggest that you follow the instructions in the link and check if this can help:
Cannot view PDF on the web
http://kb2.Adobe.com/CPS/328/328233.html
Respond with the required information so that we can help you further.
-
original title: problem with shdocvw.dll
Hey guys just a quick question.
bascailly, I'm working on the first line of support for a company and we have created a software for the United Kingdom NHS, basically our software is used by doctor general practitioner through the United Kingdom to read documents electronically.
a question we seem to become much lately is certain parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the module faulitng error. When event viewer is selected the below appears.
Failing application dme7_client.exe, version 7.1.0.270, failing module shdocvw.dll, version 6.0.2900.6212, address 0x000b26fe failure
It seems that the only way to solve this problem is the newspaper on a differnet and use them as seems to be the specific user. does anyone have any ideas of what we can try to solve this problem without obiously the user with a different account?
see you soon
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forums. Please post your question in the MSDN forums.
You can follow the link below to ask your question:
http://social.msdn.Microsoft.com/forums/en-us/categoriesI hope that helps!
-
Trying to update my video player, I clicked on 'file' and then download it and I got was a full window of the computer language without option "run".
To jscher2000 ~ I did what you said and it says "Media player could not be verified for use in Firefox. Proceed with caution. My husband told me to just delete, so I think I'll do it. Thanks for your help! Nice day.
-
It said "restore enough memory for programs to operate correctly, save the file and then close or restart all open programs".
I changed the size of paging and says always the same, I have 1.5 GB free RAM, but don't know how to find or what to do 'virtual memory '. Have windows 7.
I started the safemode and run also memory dignostics and nothing found, please help, cannot afford to take a shop or get a new computer, I'm using another pc.
I was recommended to download and. Run 'hitmanpro3'... but if anyone has had this problem and solved it or know how, please help!
Thank you
Hello
Please contact Microsoft Community.
I understand that you receive an error related to the lack of virtual memory. This error message appears when running any program that requires more memory your computer has, or running in the background, Windows manages the system memory by saving the data between physical memory and virtual memory. In order to help you better, please provide us with the following information:
What is the brand and model of your computer?
I suggest you follow the methods and check them off below if this solves the problem.
Method 1: Clean boot
A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can determine what elements of the normal starting procedure problems.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: Once you are done with the clean boot, follow the section How do I reset the computer to start as usual after a clean boot troubleshooting under more information in the article to put your computer to normal startup.
Method 2: Prevention of insufficient memory problems
Follow the steps mentioned in the link and the check, it solves the problem. Follow the evolution of the size of the virtual memory section
http://Windows.Microsoft.com/en-us/Windows/preventing-low-memory-problems#1TC=Windows-7
Method 3: Virus Scan
Microsoft Safety Scanner is a free burner that can be used to analyze a system for computer viruses and other forms of malware.
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Additional information: Windows optimize for better performance
Hope this information helps. Response with status so that we can help you.
-
I can't get all the connections. HP Pavilion laptop g6 was working fine and then just stopped to say the connections of the error. I tried everything I could but to no avail.
Hi Sheryl,
more information is needed for a better response from the community.
Here's a generic convenience store to try:
B Eddie
-
using professional XP, hundreds of favorites in IE 8. I can't their in Firefox, either directly by the Bookmark Manager (show all bookmarks/importing data and backup/import from another browser OR exporting favorites in IE 8 to an html (fact) file and then get back Firefox Bookmarks and using bookmarks/show all bookmarks bookmarks-import and backup/import html file.) I find the file, double click on open, BUT nothing happens in the bookmarks library?
It is not one case about others come more - nothing happens?
Have you tried a search in bookmarks (library) Manager since some know bookmarks?
Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.
You can check for problems with the database places.sqlite file in the Firefox profile folder.
-
I backed up my files and then did a reinstall. Watch winmail.fol backup but not the eml files. Is there a way to retrieve my emails via the winmail.fol files?
Hello
· What program did you use to back up files?
Here are two ways to restore the saved messages:
Step 1: Before you start Windows Mail, copy the folder saved in C:\Users\username\AppData\Local\Microsoft\Windows mail storage folder.
Step 2: Start Windows Mail and import messages in the backup storage folder.
-
I recently bought a new camera from Sony a7 - ii. the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7. What should I do to get these files imported as raw files?
Hi Bobsirkus,
The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.
Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices
You can use the DNG Converter, converts images and then import them into DNG in Lightroom.
Kind regards
Tanuj
-
In version10.1.5 how I would break down a large PDF file and then save each page which is the biggest file?
If you mean Adobe Reader 10.1.5 (you tell what you have) then you can't. This would require the full version of Acrobat.
-
I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).
What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
e '.example of extractedb.txt information:
* has a random number of emails as well *.
I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.
Any help would be great = D
Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error. Based on a single or multiple list item content of the list, display accordingly.
game of mf to ((path to the folder as text) & "mail_list.txt")
the value mf_List to {}
the value sel_addr to {}
the value mf_List to paragraphs of (read file mf)
the value sel_addr to (choose from the list mf_List with title ¬
('Mail list' with multiple selections allowed without empty selection allowed)
If sel_addr is equal to false then
Error number-128
return
end if
If length of sel_addr is equal to 1 then
sel_addr display dialog box as text
on the other
the value Point to the text of TID to AppleScript delimiters
the value Point text in AppleScript return delimiters
display the dialog box elements of sel_addr in the text
the value Text of point AppleScript delimiters to TID
end if
return
-
Open the simple file and then CANCEL example
Hello
Can someone please send a simple file open then cancel example VI? I am trying to open a file to write ASCII text. I have this job. Now, I want to take the option "CANCEL" and do NOT write the file, but do the other things I've done.
Thank you
Jim
Well, the dialogue file Express VI has a "canceled" exit - then just use it. You can simply drive a deal structure around your file entries.
Also, what in the world you try to do with the feedback node, and that inner while loop?
In addition, pleeeease read the Guide of Style of LabVIEW.
Maybe you are looking for
-
Asking the user to select a file path to record data to
Hello To improve the 'user interface', and the usability of my VI, I would like to have the dialog box "select file path" appears automatically, rather than create a user by clicking on an icon on the front panel to display the path of the file dialo
-
Status icon Internet connection in the toolbar
How to activate the Internet connection status icon in the toolbar at the bottom right of the screen?
-
Hi, I hope that my problem can be solved here. I have laptop ASUS. My operating system is windows 7. It starts and crashes. And I also tried to start in safe mode, but it didn't work. Start windows and after the windows logo appears and it freezes an
-
BlackBerry Smartphones to a new blackberry data transfer
Hi, I have a blackberry 9780 and that you have upgraded to a 9790, I know that to get all my messages, contacts, etc, I need to back up my phone and restore it to my new one, but I was wondering what I need to add my email accounts, before I restore
-
The power switch of my old HP Pavilion a320n PC motherboard has failed. Someone at - it a source for a new power switch module? Thank you... Stony