SelectManyCheckbox earpiece

Similar Questions

• Earpiece volume control

  All started to use the brand new pair of iPhone headphones.  The earpiece volume control works with my iPad 2 but not with my iPhone 6.  I tried to restart the phone and looked at the settings but nothing stood out.  The Atria will work fine with the phone. I can control the volume with the phone.  Just impossible to control the volume with headphones or make other controls work. Any ideas?

  Fixed.  Cleaned jack carefully with a paper clip.

• Unable to pair up and connect my bluetooth earpiece/headset

  I bought a Motorola DEFY this week. I try to connect this handset with my Planktronics Voyager pro headset.

  Not until now, no progress. The handset is not even acknowledge the presence of the earpiece/headset bluetooth

  Someone has done this before, please help

  did you put the headset in pairing mode?

  What model of headphones do you have?

  try to maintain the call button and the volume up (both on the headset) button if this is right that the LED on the headset flashes red and blue, which means that it is in pairing mode

• What type of earpiece that must I use?

  I want to run a background process that listens when a user clicks in a field of text on a Web page. Is this possible? What type of earpiece that must I use?

  Mark as resolved then.

• Earpiece of the phone, can send SMs?

  Hai Guys'

  I develop an application by using the class listening port of the phone and that will make the program may be texting, class Wheater phone earpiece

  Bee can send sms?

  Please advice

  What is your test environment?

• BlackBerry smartphones I can't hear callers Via the earpiece

  Recently I am unable to hear the appellants via the headset, but I am able to hear the appellants via the speaker and also music via the bb Media Player well.  This could be the cause?  Maybe bad listener?  Thanks in advance.

  OK guys, it was a faulty earpiece speaker.

  I was going to replace it myself but visited my phone account was still under warranty and if I just got a new phone instead.

• BlackBerry Smartphones the Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

  The Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

  It's not clear to me, if only the bluetooth Blackberry devices work with the Bold 9700, or any bluetooth device.  With the Bold 9700 recognize to ask the code four numbers when first by aligning it with the HS820?

  I matched two Plantronics, a Motorola and an earpiece/headset Cardo bluetooth with the 9700 and they work very well for phone calls, but I can't get the audio from Media Player to play on one of them.

• How to set up checkboxes for SelectManyCheckbox programmatically?

  Hello experts!

  Please help me with my question.

  I work with Jdeveloper 12.2.1.0.0

  I have SelectManyCheckboxaf:selectManyCheckbox

  <af:selectManyCheckbox id="my_selectManyCheckbox"
                    valueChangeListener="#{TasksFilterBean.onTasksFilterPriorityChanged}"
                    autoSubmit="true"
                    required="false">
                        <af:selectItem label="High" value="1" id="si4"/>
                        <af:selectItem label="Middle" value="2" id="si5"/>
                        <af:selectItem label="Low" value="3" id="si6"/>
  </af:selectManyCheckbox>
  
  

  And I need to configure programmatically check boxes.

  I found this item the bean.

  ***
  RichSelectManyCheckbox my_selectManyCheckbox = (RichSelectManyCheckbox)task_page.findComponent("my_selectManyCheckbox");
  
  
  _logger.info("my_selectManyCheckbox: " + my_selectManyCheckbox);
  
  

  And question.

  How to set up checkboxes for SelectManyCheckbox programmatically?

  For example.

  I want to configure environment checkbox to activate.

  How to do this?

  PS. I'm tempted to find the solution, before you create new discussion.

  I added the SelectManyCheckbox property:

  value="#{TasksFilterBean.selectedCheckboxes}"
  

  And I added some methods in the bean:

      private List selectedCheckboxes;
  
      public void setSelectedCheckboxes(List selectedCheckboxes) {
          this.selectedCheckboxes = selectedCheckboxes;
      }
  
      public List getSelectedCheckboxes() {
  
          List selectedCheckboxes = new ArrayList();
          selectedCheckboxes.add("2");
  
          return selectedCheckboxes;
      }
  

  And now everything works.

  =================================

  Now I CAT change bean like this:

      private List selectedCheckboxes;
  
      public void setSelectedCheckboxes(List selectedCheckboxes) {
          this.selectedCheckboxes = selectedCheckboxes;
      }
  
      public List getSelectedCheckboxes() {
  //        List selectedCheckboxes = new ArrayList();
  //        selectedCheckboxes.add("2");
          return selectedCheckboxes;
      }
  

  And now I can then use:

          RichSelectManyCheckbox my_selectManyCheckbox= (RichSelectManyCheckbox)task_filter_page_template.findComponent("my_selectManyCheckbox");
  
          my_selectManyCheckbox.setValue("1");
  

  That all.

  Thank you all.

  Especially at Jiri.Machotka - Oracle

  ===========

  UPD. I'm sorry. It looks like I can configure values to 1 item on SelectManyCheckbox without bean methods.

  And with the above example, I had problems when I unckeked all the check boxes.

• CSS for the size of box selectManyCheckbox

  HI, we use jdeveloper 11.1.7.1 version andtying to apply some css for the check box of the item SelectManyCheckbox.  Need to increase the size of the box. Also by default wording is followed with the box, but I need to go back to the first label of the sequence and the checkbox should be displayed. Searched a lot on google but could not find a specific way to achieve this. Can anyone help please on the same subject.

  Hello

  Try with something like this:

  AF | selectManyCheckbox::content input [type = "checkbox"] {}

  Width: XXpx;

  height: XXpx;

  }

  AF | {selectManyCheckbox::label}

  position: relative;

  left: XXXpx;

  }

  Kind regards

  Ruben.

• checkboxes inside selectManyCheckbox needs filling.

  Hello

  I use a selectManyCheckbox with four selectItem sub inside.

  For a style point of view, I want to have some space them inbetween. I tried to put & nbsp after selectItem lable it does not help.

  I checked the style property that is only available with selectmanycheckbox tag which is applicable on the whole point. Suppose I put padding, it is applied to the outer not on individual checkbox layer.

  Need some help here. Please let me know if you need additional information on the same.

  < af:selectManyCheckbox label = "" id = 'smc1' "

  valueChangeListener = "#{pageFlowScope.shuttleBean.rolesPicker} '"

  autoSubmit = 'true '.

  Binding = "#{pageFlowScope.shuttleBean.SMC1} '"

  layout = "horizontal".

  styleClass = "kk" >

  < af:selectItem label = 'Apps' value = 'APPS' id = "si8" / >

  < af:selectItem label = 'Tech' value = 'TECH' id = "si9" / >

  < af:selectItem label = "OD" value = "OD" id = "i5" / >

  < af:selectItem label = "Consulting" value = "CONSULTING" id = "si4" / >

  < af:selectItem label = "GBU" value = "GBU" id = "si6" / >

  < / af:selectManyCheckbox >

  Sorry to bother the guys I found the solution...

  You can use

  {label .kk

  padding-right: 10px;

  }

  This will put padding inside checkboxe indicate which servers my object

• How to set programmatically a value to &lt; af:selectManyCheckbox &gt; whenever the user deselect the other checkboxes

  Hello

  I use Jdev 11.1.1.7

  Requirement: checkbox selection a lot with three values for example: A, B, C (three boxes) configured on .jsff page, whenever the user tries unchecked A, B, C checkboxes, need programatically 'A' check through valueChangeListener box. The inputts greatly appreciated.

  Thank you

  Hello

  If all the boxes are involved to uncheck that you can try to do something like this in your valueChangeEvent:

  if(OldValue.Size > NewValue.Size)

  check value added to the list (value of the selectManyCheckbox property)

  You must cast an old and new value of valueChangeEvent list and call the method of size.

  Kind regards

  Ruben.

• make default selection "All" for SelectManyCheckbox component

  I have try this:

  int [] stateIndex;

  DCIteratorBinding dcMasterDetail = (DCIteratorBinding) evaluteEL ("#{bindings.") LogTypesVO1Iterator}");

  ViewObject voM = dcMasterDetail.getViewObject ();

  rowCount int = (int) voM.getEstimatedRowCount ();

  stateIndex = new int [rowCount];

  for (int i = 0; i < rowCount; i ++) {}

  stateIndex [i] = i;

  System.out.println ("INDEX" + stateIndex [i]);

  }

  Links DCBindingContainer = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  List of JUCtrlListBinding = (JUCtrlListBinding) bindings.get ("LogTypesVO");

  System.out.println ("LINHAS" + rowCount);

  list.setSelectedIndices (stateIndex);

  but do not work.

  I apply this feature in showdetailitem (DisclouseListener) on panelAcordion to run when is open

  Or simply use this code instead of yours.

  BindingContainer access method-

  public BindingContainer getBindings() {
  

          return BindingContext.getCurrent().getCurrentBindingsEntry();
  

     }
  

  Code to set values in selectManyCheckbox-

  int stateIndex[];
  

         DCIteratorBinding dcMasterDetail = (DCIteratorBinding) getBindings().get("LogTypesVO1Iterator");
  

         ViewObject voM = dcMasterDetail.getViewObject();
  

          JUCtrlListBinding list = (JUCtrlListBinding) getBindings().get("LogTypesVO");
  

         DCIteratorBinding iter = list.getDCIteratorBinding();
  

         RowSetIterator rsi = voM.createRowSetIterator(null);
  

         int i = 0;
  

         int rowCount = (int) voM.getEstimatedRowCount();
  

          stateIndex = new int[rowCount];
  

         while (rsi.hasNext()) {
  

            Row nextRow = rsi.next();
  

             iter.setCurrentRowWithKey(nextRow.getKey().toStringFormat(true));
  

            int indx = iter.getCurrentRowIndexInRange();
  

            stateIndex[i] = indx;
  

            System.out.println("Index in loop--" + indx);
  

             i++;
  

      }
  

    rsi.closeRowSetIterator();
  

          System.out.println(stateIndex);
  

        list.setSelectedIndices(stateIndex);
  

  Ashish

• Need to reset a selectManyCheckbox

  Jdev 11.1.1.6

  I have this piece of a jsf page:

  < af:selectManyCheckbox value = "#{bindings." MatriculasHonorView1.inputValue}.

  label = "#{viewcontrollerBundle ['ALU.]}" "{[EAMNUMERO']}."

  immediate = "true" autoSubmit = 'true '.

  Binding = "#{backingBeanScope.AluCertIniBB.smc3} '"

  partialTriggers = "soc2".

  visible = "#{backingBeanScope.AluCertIniBB.visibilidadListaMh} '"

  valueChangeListener = "#{backingBeanScope.AluCertIniBB.addAsignaturasSvMatriculasHonor} '"

  ID = "smc3" >

  < f: selectItems value = "#{bindings." MatriculasHonorView1.items}.

  ID = "si16" / >

  < / af:selectManyCheckbox >

  The page is within a workflow that loops through the other pages until enters this page again.

  The first time this page that I select the first value in the selecmanycheckbox. It executes the

  valueChangeListener = "#{backingBeanScope.AluCertIniBB.addAsignaturasSvMatriculasHonor} '"

  regarding procedural deletes a line of the

  value = "#{bindings." MatriculasHonorView1.inputValue} "view object.

  When I continue with other pages and come back to this page, the af: selectManyCheckbox displays all the previous values but that checked in the first run. It's just because we had removed.

  The problem is that the first element of the af: verified continued selectManyCheckbox although I didn't click on it (he remembers checking the value in the previous year).

  This has two problems:

  1. I don't want any point of default checkd and less the previous I have ckecked.

  2. What is MUCH MORE IMPORTANT: the user may think that this element is really active but the problem is that no

  valueChangeListener = "#{backingBeanScope.AluCertIniBB.addAsignaturasSvMatriculasHonor} '"

  is executed (because he or she clicked on the item) and then this item is not deleted on the VO!

  It seems an easy problem to solve, but I did not get it :-(

  Any help, please?

  Hello

  You can reset you selectManyCheckbox using this little piece of code

  public BindingContainer {} getBindings()

  Return BindingContext.getCurrent () .getCurrentBindingsEntry ();

  }

  / * Method to clear the selected value of the multiple selection pane

  @param actionEvent

  */

  {} public void resetShuttleAction (ActionEvent actionEvent)

  BindingContainer bc = this.getBindings ();

  JUCtrlListBinding listBindings = (JUCtrlListBinding) bc.get ("DepartmentsView1");

  listBindings.clearSelectedIndices ();

  }

  It will clear all values at any time, just the name of your selectManyCheckBox link

  Thank you

• Help! The I can't hear out of earpiece when to pass or receive phones.

  Help, please!

  When receive or make phone calls, I can't hear anything on the earpiece on my Palm Pixi Plus. The speaker is the only thing that works.

  Someone knows how to fix this?

  Help, please.

  Hello wildrish63058:

  Welcome! No, Sir... It's not too late, by a question of fact; It's great to hear that it was such an easy resolution with a happy ending.

  Thank you to stop in and let us know!

  notimeoff

• How to set a different color for the items in selectManyCheckbox

  Hello

  I would like to change the background color of text element for each item in selectManyCheckbox (different for each element).

  It is only 5 points which could be static reference or select.

  I only know how to change background for all items

  AF | selectManyCheckbox:item-{text}

  Background: orange;

  }

  How to select concrete question text and change color for them alone?

  I have the similar problem.
  CSS - background color defined for each individual p:selectManyCheckbox checkbox - Stack Overflow

  but it don't work for me because I don't have a structure very adf

  I need somethink like this:

  AF | selectManyCheckbox:item - XXXX text - select a question by number here in the list or the id {}

  Background: orange;

  }

  I use selectBooleanCheckbox in the forEach loop