Self-timer and Bracketing

Similar Questions

• self-timer to aplpha 37 - portrait scene turn to the landscape of the scene

  I use Sony a37 with remote control and automatic timer to make the picures of myself. When I put the portrait of the scene and after setup remote control for self-timer (9pics), turn to the camera automatically from landscape to the scene and the result is that the portrait is blury and sharp background. I would have the opposite effect of the picures.

  It is recommended that set you the switches on the lens and the camera to AF. In this way, the camera automatically focuses on the subject.

  The camera will switch between the different scene modes if you have the mode selector set to smart auto, or the [i] with the Green camera on your dial icon. Make sure you have the mode set knob to SNA and select [Picture] from the options that appear on the screen.

  Another parameter, you can adjust is the setting for area auto focus (AF). You must set the camera mode dial Auto program (P). Refer to the illustration below for instructions.

  

  Taking portraits, you must make sure that the setting of AF area you will use will align with the subject. You can use [area] or [place], depending on the position of the subject.

  If this post answers your question, please mark "accept as Solution.

• Time and Date Z30 blackBerry

  Dear friends

  What is the problem with Blackberry Z30 whenever I restart the phone even for seconds, the date and time reset to Mar 9 and the time of 3:45. How can we challenge any idea. It does not seem to recognize the self... It's ruining my system and appointment call recorder.

  I'm sure that this is not a toy

  Questions, suggestions...

  Go to settings > Date and time.

  Zone to check and correct if necessary.

  Recommend Auto update time zone at the prompt. You never know when the mobile network will transmit the wrong time zone and your alarm goes off at the wrong time. But now, for troubleshooting, look and see if the time zone is correct, and look for you prompt to accept the change.

  Allow to set a Date and time automatically.

  If the problem is not the time or time zone is transmitted by the network or the BlackBerry seems to react to the time signal mobile network, then I would look at possibly conflicting software apps, corrupted and that sort of thing. It may be easier to just make a clean OS and then move forward a step at a time and that you restore the data and install test applications.

• Sony A3000 self-timer with HDR

  Is it possible to avoid pressing the trigger manually for the HDR feature?

  Same question for the AEB function, just doesn't seem to work or is at - it something for her?

  Hi Vlad-8! The camera cannot be set on the self-timer mode and is set on the one shot when Auto HDR is turned on. You can choose either [self-timer] or [support: suite] since they are both in Drive Mode.

  If my post answered your question, please mark it as "accept as a Solution.

• Creating a rule entry time custom to read the start time and the stop as entry time

  Hello world
  
  I hope this is the right forum to post this question.
  We are putting in place the time and work package, and we need to write a few rules of the time for this entry.
  
  The first of them is to have a rule that validates the start time and the stop time has entered the entry-level feature Self Service scorecard.
  So, I created a formula to achieve this objective. This formula eventually calls a PL/SQL function that checks for card points, the Start and Stop time values stored in the database.
  
  However, this is not what I intend to achieve. What I have to do is to get the value of time as she walked and apply the Validation
  
  This expansion in a scenario:
  
  1. the employee connects via the Self Service and access the timesheet feature to make a time entry
  2. on August 20, he entered 13:00 as the start time and stop time 20:00
  3. click on the button
  
  When he clicks on the button Save, (assume 20:00 is an incorrect time), an error message should be displayed to the user informing him of this
  
  ----------------
  Now, I have to spend the early hour 13:00 and the 20:00 in the formula stop time so that I can post it.
  This is where I run on issues that I don't know how to get these start and stop within the formula time
  
  Grateful if someone could help with this.
  It's quite urgent given the lead times for completion on that.
  
  Thks in advance folks
  Ravi

  l_timecard_info: = hxc_self_service_time_deposit.get_building_blocks;
  l_building_block_attr_info: = hxc_self_service_time_deposit.get_block_attributes;

  However, I do not understand this:
  If there are no parameters that are passed to these calls, then how the correct score card to be recognizable? I'm assuming that there is something like a Timecard_Id or setting Timecard_Ovn that allows to identify the correct sheet when reading this info.

  Pls advise me on this point, because I'm just not understand this bit.

  You do not need to pass all parameters. The overall picture of pl/sql is filled for the session before the rule of time entry. If you want to restrict, the formula will be an id_ressource of entry which is an employee self-service Person_Id. and compare this value against id_ressource in l_timecard_info.resource_id

  If this isn't an inconvenience for you, I want to understand how these function calls to keep the start time and stop time, and to access these variables, I would need to loop as a table through?

  The l_time_card_info of pl/sql table is filled exactly the same as how is stored in HXC_TIME_BUILDING_BLOCKS when save is saved / submitted. It's just that the pl/sql is here filled.

• Show only the time and a red relief

  My watch does not show the clock face. If I press the bottom button, it will display the time and a symbol of red light.

  Hello

  Your watch has a low battery charge level and entered into mode of power reserve.

  This mode displays only the time when you press the side button, in order to keep this service as long as possible.

  You will need to exit this mode, press and hold the side button. However, you need to charge your watch first. Allow up to 2.5 hours for a full charge.

  More information:

  With the help of power reserve - Apple Support

• Why then download a clip is not clear, some of the writing, it is not clear how can a solution this? Thank you very much for your time and your help on this issue.

  Video playback that I just downloaded in my VLC it don't watch not clear enough to read Instructions, how can I make it clear to be able to read the Instructions? I thank very you much for your time and your help.

  It could be that the music is bad. It could be your software.

  Download the latest VLC Player.
  Post a public link to the clip.

  • see if there are updates for your graphics card disk drivers

  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

  https://forums.Adobe.com/message/4468493#TemporaryWorkaround

  • turn off hardware acceleration in the Flash plugin

  https://forums.Adobe.com/thread/891337
  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• How to transfer pictures from iphone to PC and keep the date, time and place

  How to transfer pictures from iphone to PC and keep the date, time and place

  Hello Grumpelfuerer,

  Thank you for using communities of Apple Support.

  If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

  Import photos and videos from your iPhone, iPad or iPod touch

  Best regards

• Where's my calendar? Restarted 4 times and no calendar!

  Lightning Calendar updated yesterday and now it's gone. OS Win 7. Thunderbird restarted 4 times and still no timetable. That is what it is?

  Thanks much christ1. Installation in safe mode worked. I was lost without my calendar. I hope that this will not happen again.

• Have not used my email in a long time and I forgot the user name and password

  Hello. I don't use my thunderbird email in a long time and can't remember my user name or password if I remember my email address. How can I connect?

  Your user name is all or part of your e-mail address.
  The user name and the password is given with your email provider. You need to communicate with them.
  Most providers have a password reset link on their page for help by e-mail.

• My iphone 6 does not light, I held the home button and power at the same time and no vibration or no sign of life, any suggestions as to what it could be would be appreciated

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Marley6921 wrote:

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.

• Time and Date setting

  In general - the time and date settings can I put two areas. I want to see two areas on my status bar. Don't want an app for that.

  I'm afraid, which is not supported by the firmware. If you want that for any update to update future iOS, let Apple know your wish using this link:

  Apple - iPhone - Feedback

• How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  It does not work like that. It cannot be scheduled for a specific time.

• I deauthorised all my computers several times and iTunes still shows that I have authorized 5.

  I allowed off all my computers several times and iTunes still shows that I have authorized 5. I can not re - allow one of my computers and cannot allow overall because I did last October. I tried a logout and back logging, remove the SC info folder etc... Any ideas?

  I allowed off all my computers several times and iTunes still shows that I have authorized 5

  Normally, you can only authorized computers off once a year.

• My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  If she needs your Apple ID password and you have enabled 2-factor authentication, you might have to temporarily disable the connection to complete.

  Also, you need an internet connection to perform this step here.

  If your problem is not of the above, please describe more completely. Furthermore, to give specific messages on the screen.