Send e-mail to the user after the form submission

Similar Questions

• Cannot send e-mail to the server... get alerts of demand... except on a local wireless connection

  This had led me batty since I got the phone.  My mail server is on my local network.  If I send an email from the local network without wire of the pre to my mail server quite well.  If I try to send an email via the network of sprint - or actually on the network wireless anyone, he's going through.  I can sit here a my firewall monitor and the see through and I can also see it connect to my email server, so I know not that there is a good connection there.  I don't have any problems with imap works in any situation with the pre, so I'm sure something happens.

  My firewall rules are the same for IMAP/IMAP-SSL/ESMTP/ESMTP-SSL (with just the ports change.)  I am able to send an email from my client of the laptop to my mail... Server and able to send an email from my Treo 755 p using snappermail on the network of sprint very well.

  The firewall is PFSense 1.2

  Mail server is Courier 0.62.1 running on Centos 4.7 (no firewall running ip)

  Really confused!

  Thank you

  Done this, and it still doesn't get me anywhere.

  But I end up finally solve the problem...

  It seems that my server ident checks had to timeout... who was taking too long for the final customer... so needless to say I said to my server does not perform a check ident and email send accelerated time.  good thing is this speeds also send other things too.

  It seems that the timeout for sending electronic mail of the pre is 'short' as< 30="" seconds="" or="" so..="" i'm="" not="" sure="" what="" the="" standard="" timeout="" should="" be..="" but="" my="" issue="" appears="" to="" be="">

  Thanks halula for trying to direct me towards some additional info, but that debug information was not useful... I ended up doing some pre openssl commands and synchronization between local and remote have been, well... huge... once I passed this point... a moment of work helped google in the right direction.

• I just need to send e-mail to the recipient

  I just need to send e-mail to the recipient

  DECLARE

  v_Message VARCHAR2(4000)

  HTMLDB_MAIL.SEND(

  P_TO =>'[email protected]',

  P_FROM => '[email protected]',

  P_BODY => v_message,

  P_BODY_HTML => v_message,

  P_SUBJ => 'Share!!');

  APEX_MAIL.PUSH_QUEUE; END;

  FYI: Here is the link to the documentation on the apex_mail package:

  APEX_MAIL

  So what is the error you get?

  Have you tried APEX_MAIL. SEND instead of HTMLDB_MAIL. Send?

• "The server has encountered an error" when you want to send a message with the form.

  Hello

  "The server has encountered an error" when you want to send a message with the form.

  With the businesscatalyst site, the message is well received by the recipient as the site FTP host, the previous message is displayed.

  What code do I add and where?

  In advance, thank you.

  Please, answer in french!

  Hello ScratchMaster,

  Please see the link below, I'm sure that you will find it useful.

  https://forums.Adobe.com/docs/doc-3581

  Kind regards

  Vivek

• Outlook express send e-mail, get the error message, but no error send copies but listed 6.

  Home-Internet Outlook Express 6 XP Windows. Have a Norton Security System. When an e-mail is sent, an error message appears "Please consult the list of errors below for more details", none are listed. The e-mail is sent and appears also in the output area to be send. The e-mail message is received to the person, it is sent, but there are 6 copies of them. Sometimes, a box on the bottom appears Norton, checking emails. It appears, at this point, all 6 are treated through Norton. The file send list however one as being sent.

  You have apparent dbx file corruption.
   
  Spend most of your messages out of the Inbox, and then create the new box of sent, and sent items files after you move the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx 

• I want to send a mail to the same receptors without making a new list, because I will only do this twice

  Or maybe send an email to the people even after application changes the text

  Click with the right button on the original sent message and select Edit as New. He must fill in the addresses of original and you can only edit the message.
  After that, I'm out of suggestions.

• Sending e-mail to the Droid

  OK this is perhaps stupid - but you send an email from the Droid?

  What do I have to open the browser, go to my g-mail account, and then send?

  hit your gmail app icon > touch menu (to the left of the House) > then compose and set your all

• Cannot send e-mail to the craigs list

  Why can't send an email to the craigs list, I have windows vista

  And what e-mail client (program, application, the thing you click on check / send emails on your computer) are you using?

• How to send e-mails using the RIM api.

  Hi all

  My requriement, it's that I need to develop an application to send e-mail using only the RIM api. Please help me by sending an email using the RIM api. I use version 4.7.0.41 JDE

  Through this Developer's Guide, Section, 'Integrate Messages'.

  http://NA.BlackBerry.com/eng/deliverables/608/BlackBerry_Application_Developer_Guide_Volume_2.PDF

• Cannot send/receive mail in the Windows Mail app on my laptop only

  I can't send or receive emails in Windows 8 on my laptop as he repeats to me in the upper right: "'* address email is removed from the privacy * is not available" (where xxx is my name). " I also have the Hotmail app on my iPhone and Android phone and they both signed and receive mail fine. I can even use my SkyDrive app very well on my laptop. Only the mail is affected.

  I rebooted to see if something had to be refreshed, but it made no difference. Anyone has an idea why this error and the inability to send/receive mail my mail?

  Hello

  Thank you very much for answering. I managed to settle the question, not that I know what it is. This is the only laptop among the many features that I sync with mail Outlook.com. I ended up going in the settings of the Mail application, off 'Synch Mail' and then I went back in the settings and turned on Synch Mail.

  Email stuck in my Outbox sent immediately and new messages have arrived. FIX :-)

  Some people do not like the Windows Mail application (it may not meet their most demanding needs), but I like it. I rarely use my MS Outlook more as it seems very small and crowded, by comparison. I love getting the full screen on my laptop to see what I just want to see, without toolbars and taskbars fly screen real estate.

  Sorry for the rant and thanks again for the reply.

  Best regards
  Brian.

• Validate 2 fields of e-mail in the form of disks insert

  Hello

  I used the wizard insert a record form to create a form, including using the form validation server behavior to validate multiple fields.

  I can't understand how to compare and validate 2 fields for email address.

  After the form has been created I open the validate form behavior of existing server - Advanced tab and built the condition {sub_email2}! = {sub_email}, but this had no effect on the form.

  The other thing I tried was creating a new behavior to compare the Transaction field with the same condition {sub_email2}! = {sub_email}, also seems to have no effect.

  I'm just a beginner, so I admit not really knowing what I'm doing, for me uninstallation has been a great help.

  The other thing I noticed, when I tried both the above, not to mention that without impact on being able to submit the form with different e-mail addresses. Red asterisks, which indicates a mandatory field, would disappear.

  Here's the form http://www.oescahealthregistry.org/forms/pedigree_submission.php this version of the form does NOT include any of my attempts to validate the E-mail fields.

  Thanks in advance for your help.

  Dennis

  Hello

  A comparison statement should work fine. For example, I did small format which inserts the name and email (2 courses) help Insert record Wizard.

  The name field is required, the email field is mandatory and ensures that it is a valid email ([email protected]) structure. I then finish the wizard.

  
  displayFieldHint ("email");? > displayFieldError ("email", "email");? >

  ---

  I then add the extra field to the form that the 2nd e-mail will be concluded, this one I called him email2, I then copied the code hint display and fielderror of the first email and placed behind the 2nd email and change the text to reflect email2. Which probably isn't serious, but I put it here anyway.

  
  displayFieldHint ("email2");? > displayFieldError ("email2", "email2");? >

  ---

  Now that I have two e-mail fields in the form, I go to the developer server behavior under tools and select compare fields of operations to the title of the form validation.

  I hit the + to add a field I can select e-mail for the domain, and == for condition, then {POST.email2} to compare. I get into an error message and click ok.

  She's the form is ready.

  The first email field will check against the e-mail validation and the 2nd E-mail will check against the first e-mail.

  I hope this helps.

  ---

  Please note that the database only has 2 fields to enter data. Then 2nd email field is only for validation.

  Post edited by: Albert S.

• Create a button to insert an image in a pdf form which disappears once the user hits, a form submission or form reset button?

  I am updating a form of company which was created in Livecycle Designer, by a user who has left the company, which has an image button to join.  The Acrobat of the company bought dc pro for me, thinking that I would be able to update the form, but it is not able to be edited, and I therefore re-created form in ms pro.

  I can get the user to insert an image PDF using javascript

  event.target.buttonImportIcon ();

  However not being is not familiar with javascript and still learn acrobat, it's that I can get in the previous forums before I lose myself.

  The javascript works fine to get the image, however is not immediately clear the reset form or submit buttons for forms are used.

  Can someone please give me simple and clear instructions on how to do it?

  P.S. Adobe website does not mention anything not being able to edit livecycle designer forms in other versions of acrobat, so I'm already very frustrated.  So please do replies newby friendly.

  You cannot delete directly. What you can do is a kind of a hack, which is to copy the icon of a button that has not applied to icon.

  If you create an image button (it can be hidden), set it to an icon, but don't actually select one.

  When you want to reset your other button, you can use this code:

  this.getField("Image1").buttonSetIcon (this.getField("EmptyImage").buttonGetIcon ());

• Several e-mails in the form of MUSE

  I have forms on my site of MUSE. Have more tha one e-mail of the recipient in the form I get server error.

  Using a single address his work propperly.

  This does NOT work: [email protected] ; [email protected]

  It comes to along: [email protected]

  the error is most likely to your server... are you sure the correct address is not [email protected]?

• Use &lt; cfajaxproxy &gt; to handle the form submission?

  ColdFusion 9

  Im trying to submit a < cfform > function CFCs without appellant cfm refreshing. The name of the form is dynamic, and so are the elements contained in the form. Javascript seems to pass the form as a structure to my cfc, but the < select > and < textarea > are empty.

  ------------------------------------------------------------------------------------------ ------------------------

  < cfform id = method "" #randomID # "="post">"

  < name cfselect = "PremierElement" >

  < = "firstOption" value = "firstValue" option name > first option < / option >

  < name of option = "secondOption" value = "secondValue" > second option < / option >

  < / cfselect >

  < cftextarea type argument = "text" name = "textAreaOne" rows = "5" cols = "45" > < / argument cftextarea >

  < name cfinput = "submit" type = "button" value = "Send" onClick = "sendForm('#randomID#')" >

  < / cfform

  This is the javascript function that is called by the form:

  (The .cfc's formAction.cfc)

  ------------------------------------------------------------------------------------------ ------------------------

  < cfajaxproxy cfc = "culture" jsclassname = "cfcClass" >

  < script type = "text/javascript" language = "javascript" >

  function sendForm (formID) {}

  var cfc = new cfcClass();

  This seems to send the form as a structure of my cfc, but the < select > and < textarea > are empty

  var result = cfc.send (formID);

  }

  It's the CFC:

  ------------------------------------------------------------------------------------------ ------------------------

  < cfproperty >
  < name cffunction = 'send' returntype = "remote access" = "string" >
  < name cfargument = "formResults" type = "struct" required = "yes" >

  
  < cfreturn >
  < / cffunction >
  < / cfproperty >

  ------------------------------------------------------------------------------------------ ------------------------

  My goal here is to pass the form to the cfc as a structure. I can then loop through the structure and create a list of keys and values. I also tried to create a chain of values in javascript before the call to cfc code, but ive problems, because a large part of each form is dynamic.

  ------------------------------------------------------------------------------------------ ------------------------

  Here is my attempt to extract the form values before calling cfc:

  function sendForm (formID) {}

  to loop through the form in question

  for (i = 0; i < document.getElementById (formID).elements.length; i ++) {}

  This works for items imput simple but not for < select >

  var value = document.getElementById (formID) [i] .value;

  for < select > ive tried this, but the selectedIndex property is always 0:

  var value = document.getElementById (formID) [i] SelectedIndex;

  ------------------------------------------------------------------------------------------ ------------------------

  If someone could help me with another method; Send the form to the cfc, or create a list of values to send to the cfc structure, I'd be a very happy man.

  There is an easier way to your cfc without home page refresh.  Submit your form to a .cfm page within a very small iframe.  Then this .cfm file can send the form as a structure to your PPC.

• How to set the custom fields in the form submission email?

  Here's what I mean...

  Here is a screenshot of the form online for my client. Most of these fields are "custom".

  

  Here's an email from test of what the email looks like when it come in.

  

  As you can see all my custom fields list as just that, custom.

  When a patient fills this out it is difficult to say what it applies to that.

  How do I change these fields that say "customized" to say what really is the field?

  Hello

  It appears that you have disabled the 'label' for each custom field.

  Please select the field and go voluntarily, as shown in the screenshot.

  

  Please check the 'label' > shoe, this will be you the label to the form field as "Custom", rename it according to your requirement and disable the label again.

  

  Re-upload the site and you should be all set.

  Concerning

  Vivek