Send E-mail with the subject?
HI - create a button for the user to send an e-mail to technical support... In any case to pre-fill the subject of the E-mail?
Perhaps with Javascript?
You are the very welcome. It would be useful that you could mark it as response (after that you did so that it actually works for you!)
ERR229
Tags: Adobe Captivate
Similar Questions
-
I want to send my message by mail with the email form that I have already installed
I want to send my message by mail with the email form that I have already installed
original title:<> Hi Michael,
I suggest you to check if you get the same message in Internet explore, if you use Firefox I suggest you contact Firefox for using the link below.Hope this information helps. -
How to send a mail with attachment no matter what file use the invoke in os 6.0?
Hello
There is some issue that how to send a mail with attachment to use the invoke method in os 6.0?
"I use the Transport at this time mail send successfully, but I use the invoke to throw this error time these error ismail service does not support these tyes of change of parts joined the send using field or remove attachments ' so how do?
Thank you
Hi, rishabh
Thanks.i got the solution and super work Super-Duper hit.
Thnaks,
Umang.
-
Windows live mail error - failed to send e-mails with attachments
This is the error message I get
An unknown error has occurred.
"Object ' subject.xlsx [1/2]"
Server error: 554
Server response: 554 5.6.1 Messages of type message / partial are not supported
Server: 'smtp.outlook.com '.
Windows Live Mail error ID: 0x800CCC6F
Protocol: SMTP
Port: 587
Secure (SSL): YesI have disabled mail scanning in norton antivirus - I don't have any other anti-virus software.
I increased the length of the server timeout.
Neither helped.Send email without an attachment without problem.
Any help is appreciated!
Hi Vineeth,
Thank you for your response. I've since found the cause and I am now able to send e-mails with attachments new!
It's to do with the message is divided into parts - so nothing to do with Norton, fortunately.Mary
-
TB change the sender name to my name to email classic.
Fritz! Box send a pushmail with the name of the sender "Fritz!" Box' to my standard email address.
In the Inbox of my ISP of this name is present. Get this mail with TB the name "Fritz!" Box"is changed in lastname, firstname. This is the full name of my standard email address as I stated in my address book.In the toolbar > Options > view > advanced and turn off "see the show only the names of the people in my address book."
-
This had led me batty since I got the phone. My mail server is on my local network. If I send an email from the local network without wire of the pre to my mail server quite well. If I try to send an email via the network of sprint - or actually on the network wireless anyone, he's going through. I can sit here a my firewall monitor and the see through and I can also see it connect to my email server, so I know not that there is a good connection there. I don't have any problems with imap works in any situation with the pre, so I'm sure something happens.
My firewall rules are the same for IMAP/IMAP-SSL/ESMTP/ESMTP-SSL (with just the ports change.) I am able to send an email from my client of the laptop to my mail... Server and able to send an email from my Treo 755 p using snappermail on the network of sprint very well.
The firewall is PFSense 1.2
Mail server is Courier 0.62.1 running on Centos 4.7 (no firewall running ip)
Really confused!
Thank you
Done this, and it still doesn't get me anywhere.
But I end up finally solve the problem...
It seems that my server ident checks had to timeout... who was taking too long for the final customer... so needless to say I said to my server does not perform a check ident and email send accelerated time. good thing is this speeds also send other things too.
It seems that the timeout for sending electronic mail of the pre is 'short' as< 30="" seconds="" or="" so..="" i'm="" not="" sure="" what="" the="" standard="" timeout="" should="" be..="" but="" my="" issue="" appears="" to="" be="">
Thanks halula for trying to direct me towards some additional info, but that debug information was not useful... I ended up doing some pre openssl commands and synchronization between local and remote have been, well... huge... once I passed this point... a moment of work helped google in the right direction.
-
How to send an email with the link that has the user id?
Hello everyone, I'm trying to send an email with the link that includes the user id. After users click the link, they should be able to see the form with their information that has been previously fulfilled. So my question is after I have send email how and what is the best way to get information and show it to the user. What should be separate page with the cfquery limited on the id user or something else? If anyone has an idea of what is the best way to do it please let me know. I already have my code who send e-mails.
You save all the fields submitted initially to a database? If so, run a query and then convert them to the form field, query values. I don't know what looks like your data (or database), but a simplified version might look like this.
SELECT FirstName OF SavedFormTable
WHERE ID =
-
Question of sending e-mail with Treo Pro
I always have the same problem with T-Mobile by sending emails. I have all my settings correct and with incoming and outgoing servers (using T-Mobile) and I can only receive, not send them. I'm extremely frustrated with that by the way I think about the passage of carriers to Verizon and get rid of the phone. Don't get me wrong, I've always loved Palm and treo. I thought that if I got the unlocked version of the Pro, it would work just as my Treo 755 has no problem. The only thing really different between the Pro and the 755 is now that it is running Windows Mobile software vs of the Palm (and of course all the improvements). I really need help on this cause I am actually count the days here until I change provider and go BlackBerry. Someone keep me a person of Palm and help out me! Thank you!
Have you deleted the email account and re-create it to see if you can e-mail? Get the Cannot Connect to server error?
Is a known issue with WinMo 6.1 on sending e-mails with some e-mail providers that a fix has been posted here:
This patch is not a ROM update, so each time a hard reset is done this patch will need to be reinstalled.
Message edited by thetreoguy on 03/27/2009 18:40 -
How to set up a mail with the IOM Server
Experts,
Any idea/links/Docs on how to configure a server to e-mail with the IOM and to send e-mail notifications to someone.
Forgive me if my questions seem incomplete.
Thank you
Suren. Create a resource of Type e-mail server. Give name as "Email Server.Now fill in the values for the all parameter for example server, user name, password and authentication type.»
. Go to the System Configuration and the Email Server property value gives the name of the resource that you created in step 1, so the name will be "mail server".http://forums.Oracle.com/forums/MessageView.jspa?MessageID=3867506&STQC=true
-
"The server has encountered an error" when you want to send a message with the form.
Hello
"The server has encountered an error" when you want to send a message with the form.
With the businesscatalyst site, the message is well received by the recipient as the site FTP host, the previous message is displayed.
What code do I add and where?
In advance, thank you.
Please, answer in french!
Hello ScratchMaster,
Please see the link below, I'm sure that you will find it useful.
https://forums.Adobe.com/docs/doc-3581
Kind regards
Vivek
-
I just need to send e-mail to the recipient
I just need to send e-mail to the recipient
DECLARE
v_Message VARCHAR2(4000)
HTMLDB_MAIL.SEND(
P_TO =>'[email protected]',
P_FROM => '[email protected]',
P_BODY => v_message,
P_BODY_HTML => v_message,
P_SUBJ => 'Share!!');
APEX_MAIL.PUSH_QUEUE; END;
FYI: Here is the link to the documentation on the apex_mail package:
So what is the error you get?
Have you tried APEX_MAIL. SEND instead of HTMLDB_MAIL. Send?
-
A really strange problem!
I use different e-mail accounts. I send an email with a sender (defined as standard!), email is archived in archive A sent from the sender, the sender is wrote in the header of the email as the sender, but the email is sent with the sender B written as the sender in the email received.
Best regards, Michael
It sounds like you do not use the right smtp server to send the e-mail.
Please check what 'Sender A' smtp server account uses.
'Tools' > 'Account settings' for the e-mail account
or
Right click on the email account in the folders pane, and then select "settings".
Lower-right - outgoing (SMTP) server - select the correct SMTP server for that e-mail account.
See the image below as an aid.
Click OKIf you are unsure about what to do please post the following information:
In Thunderbird
- Help > troubleshooting information
- Click on 'copy text to the Clipboard.
- In the forum, in this issue, right-click in a text box ' Post a reply ' and choose 'paste '.
Tell me the number of the account which is "sender."
Tell me the number of the account how recipient sees as venues. -
I have been emailing for a single person and the need to revisit the old emails and they are all attached, and I have a hard time looking for the one that I want. I'm used to be able to put it in a folder marked for this person but cannot do. Why - what is changed?
so when I send an email to several people and they respond the same day they are all attached? WHY?
I don't like this new system!
I don't like this new system!
It would have helped if you had mentioned which new special system is that you don't like.
If you are talking about Windows Live Mail, click the display of the Ribbon tab, click Conversations , and select disabled.
If you have any other questions about this program, please post them in the forum Windows Live Mail.
If you talk about the Outlook webmail service, click on settings > Send settings > conversation group and preload messages and select Show messages individually.Questions about this service belong in the forum outlook.com.
If not, please explain what 'system', you are having problems with.
-
Send the link with the subject and the body?...
I know how to make a button that, when clicked, composed an e-mail to a specified address:
on (release) {}
getURL ("mailto:[email protected]", "_blank");
}
But I was wondering if there was a way to also pre-fill the SUBJECT and BODY as well as the field 'to '?
Thank you!...
To do this you will need a scripting language such as PHP server-side.
You would then send all these variables to the server and use that language to build your email.
-
Windows Live Hotmail could not send your message because the server was busy. Please try again later. Please report this problem to Microsoft.
Hotmail as well as all the problems of Windows Live are Windows Live Solution Center. It's their jurisdiction.
Please post on forum discussions for Hotmail:
http://windowslivehelp.com/forums.aspx?ProductID=1
Maybe you are looking for
-
Hi guys,. I'm from the India. I recently bought "HP laptop - 14-r113tu ' with windows OS 8.1. But, I do not earn 8.1, I love windows 7. So I desided to degrade the operating system. And also I have successfully install windows 7 32 bit on my note
-
This isn't a general volume, or volume mixer, etc. It is specifically about the ease of use section, toggle its opinion to the subsection 'Caps lock' 'ON' or 'OFF' - did not notice at first so I don't know what update was specifically involved, or w
-
The difference in performance between wins 8 and win 7.
What performance difference is there between winning 8 and win 7, or does go through whats in win 8 which is not in win 7?
-
How can I get my admin right back on windows 8?
Sorry for just jump but I also had a similar situation. I tried to fix my Norton security and one of the options that he has been to change the settings of the user account and I finished my account 'Administrator' to 'Standard' user switching. Now,