sending UDP messages to different specific IP addresses

Similar Questions

• How to send a message to a list of address book as "BCC", not "at"?

  I have different lists for different people on my personal address book of TB. If I press "Write" (for a given group), TB by default creates a message with all recipients in ' to the ' mode - i.e. all recipients will see the e-mail addresses of each and other. How can I change the default message to "bcc" parameter without having to manually change each unique entry in the email?

  Do not start a message in the address book. It is not the best place to do it.
  This is what the window of writing. Open the window of writing and turn on the contact bar by pressing F9.
  Select the contact, contacts or list you want to send to and then use one to add ALSO: buttons at the bottom of the sidebar.
  Hold down the CTRL key while clicking to select multiple items, the items.

• When I try to send an e-mail message to a specific address, I get error "error in mail delivery system.

  When I send a message to * address email is removed from the privacy * I get a message the system of delivery of mail as the mail delivery failure message. Email is a valid email address. I don't seem to have any problems with other e-mail messages. I had them send me an email at the email address and I get correctly, but if I try to respond to email I get again the failure message. Help.

  Windows xp, explorer 8.

  Ron Olszak

  Original title: System of mail delivery error

  Hello

  1. you have any mail client installed on the computer?

  2. which e-mail account do you use?

  3. What is the exact error message you received?

  A failure of delivery of messages/bounce message contains information about the message delivery problems you have encountered. How data are formatted and said in a bounce message can vary on the mail server sends the message to you. Some use technical terms. Some takes paragraphs to tell you that you misspelled probably just your recipient's e-mail address.

  I suggest you to check your Inbox; If it is full, you will receive the error. In the same way, if the other party's email box is full, you will receive the error.

  If you use Windows Live Hotmail, you can post the question on the link provided below for assistance.

  http://answers.Microsoft.com/en-us/windowslive/Forum/email

  It will be useful.

• text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.

  Text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.  This has happened recently.  My two girls have used their respective ipods and texting, without their messages of duplication for each of the other ipods for more than a year.  Somehow recently, both addresses seem to be synced with them or something, so that both see each and other messages.  I've recently updated two ipods, iTunes on my computer--not the cloud and added music for two ipods, but has not changed anything by email email settings or message I know.  Help, please!

  Welcome to the Apple community.

  I can't fully follow how you have everything set up, but a glance at the settings > messages > send & receive

• How to send UDP packets to multiple IP addresses

  I can see the full dissemination of forwarding UDP (IP value FFFFFFFF) but I do not see how to send the UDP packet even two or three specified multiple IP addresses.

  Is it still possible?

  Thank you

  Pawel says:

  The multicast would work with other receivers of udp (no-LabVIEW) operating in a mode normal unitcast? Or all networking needs receivers operate in multicast mode?

  Clients must join a multicast group in order for the multicast work. This essentially means that you tell the OS you want traffic received on a specific IP address (multicast groups are the IP addresses within a specific range) and on a specific network interface.

• How can I configure Outlook Express to receive messages to different mailboxes (via POP3) but to send messages and responses using a single SMTP account?

  How can I configure Outlook Express to receive messages to different mailboxes (via POP3) but to send messages and responses using only a single SMTP account?

  In other words, I need to download via POP3 messages sent to the * address email is removed from the privacy *, * address email is removed from the privacy *, * address email is removed from the privacy * but I want to send messages using Mar SMTP service associated to * address email is removed from the privacy *

  If I get a message like * address email is removed from the privacy * I want to answer as * address email is removed from the privacy *.

  Is this possible?

  How can I configure Outlook Express?

  Concerning

  Marius

  You can do this if the Server SMTP allows you to send from a location that you are not connected via their internet service.  So if you have this permission, go to tools | Accounts | Add mail.  Then under the account of property | You want to set the server for incoming mail to the POP3 account, and then the SMTP protocol for the other account that you use to send servers.  And then indicate whether or not the server requires authentication, and if yes, then you will need to put in the user name and password for the SMTP server it.  Under properties. Advanced to define appropriate ports that may be different from the default value according to e-mail accounts.  You can also check the "leave a copy of messages on the server" for accounts POP3, if you access messages from multiple computers.

  Once you have an account set up, then you can set others upward in the same way, but change the POP3 properties for each while leaving the SMTP ones the same.

  Once you have all that in place, you might want to backup things in case something goes wrong: www.oehelp.com/OETips.aspx#6

  Steve

• Suddenly cannot send mail. Message 4.7.1: Recipient address rejected: rejection policy - your host has been blacklisted for e-mail abuse.

  When I try to send a message an error box apperars:

  An error occurred while sending mail. The mail server responded:
  4.7.1 < ***@***.com >: recipient address rejected: rejection policy - your host has been blacklisted for e-mail abuse. Please configure your email client to use authentication SASL - contact support if in doubt how...

  Please check the message recipient "*********@******.com" and try again.
  

  This happened while I was sending about #3 4 or 5 that I must send. Nothing I know has been changed has been changed! I have downloaded the latest version while I was in the program.

  This seems to be a message from a server. The word 'host' is not clear to me. In the language of networking, it can mean your own computer, but more generally, it could mean your ISP provider or by e-mail.

  Anyway, this means that something has decided that you are, or are on a network that has been identified as a source of spam. I suggest that ask you this from your ISP.

• I tried to send a message and received a message about a wrong address. Now every time I have send a message to anyone I always get this message so I think it's a hol

  I tried to send a message and received a message about a wrong address. Now every time I have send a message to anyone I always get this message so I think it's a place of conservation somewhere and I want to erase it.
  Where it stands? I do not see any mail folder out as there was in Outlook.
  Thank you, Karen

  What is the exact error message?

• Windows Mail - how to send a message to multiple addresses without showing the e-mail addresses

  I want to send a message in Windows Mail to multiple e-mail addresses at the same time, but I don't want everyone to see who all send it. Outlook used to have an option "bcc"... Cc of the blind.

  Open a new message window. View | All the headers. Or simply click on the button to.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Send e-mail to a specific address

  Hello

  I've hidden the text boxes, etc. and depending on the response to the fall of downs, then I would like to be able to create an email button that doesn't send a message to a recipient pre defined with data from text boxes, I don't want to send the form.

  Is this possible?

  Thank you

  Using the PDF, you can not send a specific text in email. E-mail to PDF option is to send the complete PDF / XML form / XDP...

  If you want to send an email with specific text in form fields, then you must use the messaging service provided with LiveCycle Server installation.

  Hope that clarifies...

  Thank you

  Srini

• Alert - an error occurred sending a message - mail server has sent a wrong message: 5.7.1 &lt; unknown - what it means?

  When using Mozilla Thunderbird - when I try to send emails, the following will occur;

  "ALERT".

  Error sending mail. The mail server has sent a wrong message: 5.7.1 < unknown [14.137.73.189] > client host rejected: access denied.

  Why I was able to send emails to specific email addresses - but now, for some reason that I don't understand - I can't.

  How can I solve this problem?

  What is your SMTP server?
  What is the part of your e-mail address or your email provider?
  What is your ISP?

• The vulnerability is the CC and the fields of e-mail when sending group messages?

  I have a friend who is a challenge to me when I advised her to use the BCC field instead of the CC field to send group messages.
  I've been in there for years and this was one of the fundamental pieces of advice that we would give users on our network to prevent the spread of the virus and spam and to be perfectly honest, I thought it was a given since e-mail is sent in plaintext and therefore can be analyzed.  The question I have, are vulnerable to what Email address when it is used in the CC field or virus and malware seeks to steal addresses?  Also to throw away spammers as well.

  Thank you, sugi2k.

  Hi sugi2k,

  With assistance from the ICC is also how to send group messages, but I do it mainly for individual members of the group do not get to see all addresses of electronic mail to any person to whom I sent the message.  As far as I know, there is no almost difference between using the field or the CC field to send emails (although IAB a little better to hide the address, but it can still be found if you are the recipient or the sender of this JIU).  In general, this isn't how the malware and hackers work.  That's all simply too cumbersome and time-consuming to do by checking the addresses in the individual emails (if it is possible and very difficult to defend against if they can intercept the mail-, but generally found from the account of the recipient and not the sending account and generally because that most people choose to automatically add new senders of e-mail to their list of contacts and this is where the vulnerability usually occurs).

  Here is an article on the differences between the BCC and CC: http://email.about.com/od/emailnetiquette/a/cc_and_bcc.htm.  You will notice that it addresses of anonymity than the main on safety (but there are benefits of security regarding anonymity and the inabiility of other recipients to view the BCC recipients).

  Most malware and piracy occurs because someone comes to your contact list or address book or see everything simply your email address somewhere (maybe of you sent to someone who has been infected or a real pirate) and uses different techniques to make it look like SPAM and other things they send is from you when you're not actually send anything.  If they arrived at your list of book or contact addresses or someone that you are listed as a contact (probably using another method - I don't think these fields themselves are more susceptible to malware or hacking than anything else on your computer - if they have installed the keystroker malicious software or programs (everything that you type can be made available to them, unless detect you and remove malware or hacking tool), they can send to each of them (probably with an attempt to infect their systems included as well).

  In short, while they are not invulnerable, they are as safe as anything else (although IAB will limit the number of people who see the addresses of any group that can help their share where you don't know if they have been compromised) on your system.  The real problem with the e-mails is not sending them, but to receive for having "a surprise" with her that compromise your system and allows a person access to your contacts or address book - but they will not often also for entries in the messages sent and if they do, then the entries to one of these fields on your computer If it has been compromised is possible (not only e-mails but documents and about anything).

  If you are concerned that these things, use a program to encrypt messages and require recipients to have a decryption code to open.  It can still be broken by a pirate, but is much more difficult and requires a much more sophisticated hacker.

  I hope this helps.

  Good luck!

• 9.2 messages will not send any messages on MacBook

  I am running OS X El Capitan version 10.11.6 on a MacBook Pro 15 "retina (mid-2015) with 9.2 Messages. I also have an iPhone running iOS 10.0.1 6.

  A few days ago, I got an alert that someone had logged on to iMessage on iPhone 4S that I didn't own. I changed my password, and since I was not able to use the Messages on my MacBook. If I try to send a message using my phone number, he is trying to send a text message and fails. If I try to send from an email address, it sends as an iMessage and fails immediately. Everything works fine on my iPhone, but the conversations from my iPhone will not sync to my MacBook.

  I signed into messages on my MacBook and iPhone. I signed out and back several times on both. My phone number and email are all verified in the context of "you are reachable by iMessage to. I tried to remove the content in ~/Library/Messages/ and empty the trash. I rebooted my MacBook several times. Nothing has worked so far.

  Anyone know what I need to do?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.iChat.plist.  Move the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  If this does not work, repeat the above, but remove the com.apple.imagent.plist

  Thank you Leonie and Ralph Johns (UK) , that some information contained in the present.

• After that iOS 10 Upgrade, Siri can send text messages.

  I have an iPhone 6.  I have upgraded to iOS 10 (10.0.1) this morning.  Everything seems to work very well with the exception of Siri is unable to send text messages.  It was working fine before the upgrade.

  'Hey Siri' addresses.  I say to "send a message to Patti mobile xxxx."  Siri says and asks what I want to say.  I said the message.  It saves the message as usual and asks me if I want to send it.  I say 'yes '.  He says "your message has been sent.

  Then, I get an error message saying that the message could not send.  The message is then listed with a recipient of: _ $! < mobile >! $_ the message below is "Message send Failure."

  Any thoughts?  Thanks for your time.

  10 iOS update resets some parameters according to me.  It worked for me to go to Options - LTE data - cell - cell settings enable and toggle either 'Off' or 'Data Only'.  Texting non-Apple do not seem to work if "Voice & Data" is selected.

• When I send a message, how can I get Thunderbird to save it in a local folder, not "sent"?

  I use pop. I have a number of local folders where I want to store messages on specific topics. I can move there messages in my Inbox and I can move there messages sent from the folder "sent" on the mail server, but it's tedious. When I was with Pegasus mail, I could set up so that every time that I sent a message he would ask me where to save it, and I found it really useful. Is there such a feature in Thunderbird? If so, I have not found. I can't even see how to redirect messages sent to my Local Outbox folder.

  Thanks for your help.

  Tony

  Tools / account settings / Copies & folders "when sending a message...". »

  Outbox is a system box for messages that must be sent later. If you are working offline, or you decide to send later, they will remain in the Outbox until the envoys and then moved to "sent" folder.

  POP is sent is a local folder. but under the local-file account.