Sensor data store

Similar Questions

• Lost access to local data store

  Hi people:

  I have ESXi 6.0 running on an Intel S2600CWTS motherboard using the LSI SAS controller onboard and six readers Samsung 850 Pro SSD in a RAID 5 configuration.  This server is about a month and a half, and it worked fine for the first month, but in the last few weeks I started to do in the case where journal messages saying that ESXi has lost access to the data store, then, most of the time, about 15 seconds later access is restored.   Several times it took more time, which one crashed the server.  On these long, the motherboard Intel event log showed that a player had failed and began a regeneration and once the motherboard has shown that two different drives had failed, and it took both offline originally ESXi crashing.  On it that I was able to bring the two records back online via the RAID bios and everything worked fine again.  I suspect that I have hard disk problems because these discs are new and because different readers have been reported as failed, and also because no data has been lost even if 2 drives went offline at the same time.   I guess I could have a bad controller LSI, or a cable has come loose somewhere, but I expect to happen if it is really the case of data loss.

  I also noticed that lost access messages tend to appear in the log at the moment I start a virtual machine.  At first I thought that it would be one thing to flow, thinking a VM departure did a lot of IO, but this happens immediately, before even the bios of the virtual screen machine disappears, so I don't think that the virtual machine is actually reading the disc again.  In addition, as a precaution, I started the migration of some virtual machines on the server to the old server I still had available, and there is no lost access messages in the event log while that was happening, while about 50 megabytes per second of i/o has reached the disk during transfers.  I put the last patch on ESXi in mid-May, about two weeks before this started, and I begin to suspect that the patch may have something to do with it, because it seems to me that if something is happening between ESXi and the disk controller making hang up or lose interruptions during a short period of time , and I wonder if it goes pretty long if material in the motherboard sensors interpret this as some sort of hardware and simply brand failure according to readers I / O was hooked as bad then.

  Unfortunately I'm out of town now so I wanted more I had to the remote server, lest I do not not get back to the top.  I moved a couple of the most critical virtual machines from the old server which I was remotely start and transfer to virtual machines.  I also noticed that this issue tended to occur more frequently when I got to the top of the VCenter Server apparatus that any other (sometimes to others, but has happened every time I tried to start the device VCenter).  So who was the first that I moved to the old server, but strangely enough there is no error logged when I transferred the files, so the issue is not that ESXi had trouble reading the VMs vmdk file when I started it.

  I also wanted to ask you if there are any vibs for the LSI Megaraid controller on motherboard S2600CWTS I could install that would allow me to access the RAID controller without having to pick up the server and do it from the BIOS configuration screens, similar to how you can access the controller RAID from Dell while ESXi is running via a vib add-on.  So far I have not found one.

  My intention when I go to the server is to run an integrity check against the RAID 5 array via the controller and then use the AIMÉ ESXi utility on the data store to see if something is wrong here.  If not, then I guess I'll rewritten can patch.

  Ideas or suggestions welcome.

  Success!  I finally understood what the problem was corrected.  The problem is the fact that although the last vib driver LSI has been installed, for some reason any it would not automatically replace the default ESXi pilot lsi_mr3.  I did not notice that even though the latest driver package vib properly installed LSI controller was still using the original driver.  This could be considered by a 'esxcfg-scsidev - a' command showed that even "vmhba1 lsi_mr3 link-n/a sas.5001e67ca647e000 (0000:0: 00.0) controller LSI MegaRAID SAS Fury."  The second field after the controller (vmhba1) is the current manager used.  The pilot, which was to be used was: "vmhba1 megaraid_sas link-n/a unknown.vmhba (0000:03:00.0) Avago (LSI / Symbios Logic) Invader MegaRAID SAS controller.

  To fix this I had to disable the lsi_mr3 driver so that ESXi is forced to use it.  The procedure to do is the following:

  (1) make sure you have the new EXSi driver you want to use already installed.  I assume that bad things would happen if you have disabled the only driver who could run your disk controller.  Use this command to view the drivers installed: "esxcli software vib list" and you should get something similar to the following:

  [root@intelserver:~] esxcli list of software of vib

  Name Version Date seller installation acceptance level

  -----------------------------  ------------------------------------  ------  ----------------  ------------

  MegaRAID SCSI-sas 6.608.11.00 - 1OEM.600.0.0.2494585 Avago VMwareCertified 2015-07-19

  LSI - mr3 6.606.10.00 - 1OEM.550.0.0.1391871 LSI VMwareCertified 2015-06-19

  mtip32xx-native 3.8.5 - 1vmw.600.0.0.2494585 VMWARE VMwareCertified 2015-04-28

  ATA-pata-amd 0.3.10 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-atiixp 0.4.6 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-cmd64x 0.2.5 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-hpt3x2n 0.3.4 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-pdc2027x 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-serverworks 0.4.3 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-sil680 0.4.8 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  ATA-pata-via 0.3.3 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  block-cciss 3.6.14 - 10vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  CPU-microcode 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

  EHCI-ehci-hcd 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  elxnet 10.2.309.6v - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  Emulex-10.2.309.6v - 0.0.2494585 VMwareCertified-2015-04-28 VMware esx-elxnetcli

  ESX-based 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

  ESX-dvfilter-credits-fastpath 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

  ESX-tboot 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

  6.0.0 - 0.0.2494585 of xserver-ESX VMware VMwareCertified 2015 - 04 - 28

  IMA-qla4xxx 2.02.18 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  IPMI-ipmi-devintf 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  IPMI-ipmi-paremeter 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  IPMI-ipmi-TR-drv 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LPFC 10.2.309.8 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LSI-msgpt3 06.255.12.00 - 7vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LSU-hp-hpsa-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LSU-lsi-lsi-mr3-plugin 1.0.0 - 2vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

  LSU-lsi-lsi-msgpt3-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LSU lsi megaraid sas plugin 1.0.0 - 2vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

  LSU-lsi-mpt2sas-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  LSU-lsi-mptsas-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  Misc-cnic-register 1.78.75.v60.7 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  Misc-pilots 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

  NET-bnx2 2.2.4f.v60.10 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-bnx2x 1.78.80.v60.12 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-cnic 1.78.76.v60.13 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-e1000 8.0.3.1 - 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-e1000e 2.5.4 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-enic 2.1.2.38 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-forcedeth 0, 61 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-igb 5.0.5.1.1 - 5vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  NET-IGB 3.7.13.7.14iov - 20vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-mlx4-core 1.9.7.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-mlx4-en 1.9.7.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-nx-nic 5.0.621 - 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-tg3 3.131d.v60.4 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  NET-vmxnet3 1.1.3.0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  nmlx4-core 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  nmlx4-en 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  nmlx4-rdma 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  nVMe 1.0e.0.35 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  OHCI-usb-ohci 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  qlnativefc 2.0.12.0 - 5vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  REST 2.0.2.0088 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  Ahci SATA 3, 0 - 21vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

  ATA-SATA-piix 2: 12 - 10vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  NV-sata-SATA 3, 5 - 4vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  SATA-sata-promise 2: 12 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SATA-sata-sil24 1, 1 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SATA-sata-sil 2, 3 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SATA-sata-svw 2, 3 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-aacraid 1.1.5.1 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-adp94xx 1.0.8.12 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-3, 1 - aic79xx 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-bnx2fc 1.78.78.v60.8 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-bnx2i 2.78.76.v60.8 - 1vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

  SCSI-DNI 1.5.0.45 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-hpsa 6.0.0.44 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-ips 7.12.05 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-megaraid-mbox 2.20.5.1 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-megaraid2 2.00.4 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-mpt2sas 19.00.00.00 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-mptsas 4.23.01.00 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-mptspi 4.23.01.00 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  SCSI-qla4xxx 5.01.03.2 - 7vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  UHCI-usb-uhci 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

  VMware-esx-dvfilter-maclearn-1, 00 1.00 VMware VMwareCertified 2015-05-12

  xHCI-xhci 1, 0 - 2vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

  Tools-light 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

  [root@intelserver:~

  Verify that the scsi-megaraid-sas driver is installed before proceeding.

  (2) to disable the lsi_mr3 driver do the following: "esxcli set of module system - enabled = false - module = lsi_mr3 '

  (3) reboot

  After restarting, do: "esxcfg-scsidev - a" to check megaraid_sas driver is assigned to your disk controller.

  I don't know how ESXi decided to prioritize if two or more drivers are applicable to a single hardware device, or if the installation of the new driver LSI process is supposed to disable or remove default lsi_mr3 driver and simply failed to do so.  Also, I don't know what's going to happen when I put on the next patch of ESXi, specially if the lsi_mr3 driver will be once more the priority.  If anyone knows how the driver installation process is supposed to work in this situation, please let me know.  I am so happy that I finally got this problem because the server has been seriously covered with the data store become unaccessable for 5 to 10 seconds every time a VM started or stopped, and the former driver at least once done something bad enough to deceive the controller into thinking that one of the disks has went wrong and began a RAID Resync.

• root properties in the connected data store: error when accessing the date/time storage

  When you browse the properties my connected data store I get an error message when you try to read the value of the property of 'storage date/time': object doesn't support this property or method.

  Here is a minimal example:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
  Next

  Why can I not access this particular property by default?

  Hi Phex,

  for the date/time properties, an object called UsiTimeDisp is returned. This object allows to that extend features of service as access to each part separately (day, year, hour, seconds,...) of your date/time value. If you want to print the value of time with MessageBoxDisp, you can use the VariantDate this object property.

  Your code might look like this then:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    MyProperty.DataType = eTime Then
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value. ' ") VariantDate)
  
    On the other
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
    End If
  
  Next

  I hope this helps.

  Good day

  Eva

• Connection to the AOP with several NIC data store

  I have a situation where I need to have the computer that is running the tiara to be connected to two different networks.  I have two NIC installed in the machine, NIC A and B NIC, we will call them.  The reason for this is that I use Diadem to access the server on a machine of AVL PUMA AO.  If I connect to the local network PUMA, PUMA sometimes breaks down, probably something to do with the IP address.  So PUMA has need to be on a network that is not a router.  My tiara computer must communicate with PUMA, as well as with local shared drives on our corporate network.

  In any case, I have the company LAN hung on A NIC and hung on NIC B PUMA network.  Tiara fails to connect when the two networks are connected, but connects to the data store no problem when that network PUMA is hung. Any ideas how to solve this problem?  It seems tiara is looking for NIC - A instead of NIC B, as appropriate.

  For reference, when the two NIC is connected, I can access other than readers, and separate computers to ping on both networks, without problem, is not a connection problem.

  Any help would be appreciated.

  -Russ

  I guess poth NIC have different IP.

  -Did you use IP instead of the server name.

  -Do you use RPC or CORBA to access the PUMA Server?

  -What version of DIAdem.

  You can create a log file when the connection has failed?

  Greetings

  Andreas

• Need help with a Citadel of DIAdem data store opening.

  Hello

  I was wondering if someone can help me to connect to a Citadel of DIAdem data store. I've read all the online help and cannot operate.

  On my PC, I use DIAdem v11.1 and v6.1 Lookout installed as a plugin. I am trying to connect to a data of Citadel store 5 on a server visible in the image below, specifically the default database on HPSERVER1. The installation of MAX on HPSERVER1 tells me that there are 2 versions of LabVIEW Run-Time installed, 8.2.1 and 9.0.1 (I don't know if this is relevant).

  

  When I select \\hpserver1\default_database, I then set the properties as follows:

  

  In the Advanced section, I'm the deadline set to 90 seconds. When I hit OK, then I get the following message, which then brings back me to the previous screen.

  

  Any help is very appreciated,

  David.

  Hi David,

  6.2 Lookout CLIENT is for people who do not have installed Lookout but still want to connect to a database of Citadel with DIAdem.  This works for databases Citadel created by Lookout as long as those created by LabVIEW DCS, is said by the way.

  In your case, you have already installed Lookout, you don't need this additional client software.  There is no improvement in functionality in this interface between 6.1 and 6.2, so you do not miss anything, and youre data import is already working.

  I don't know about lookout not appearing is not in the License Manager, etc.  I'm sorry.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Getting property of type 'Date' from a PDO data store

  It is therefore a question of both parties.  Part A: when I search for data in a data store, to find data by using the object Navigator returns the correct number of results, using the object. GetElementList does not work.  I'm looking in the data store for steps created between a certain date (using the iStartTime property).  It seems that they must return the same results.  Please see part A of my code pasted below.  Any suggestions?  Perhaps it is - that it is related to part B of my question.

  Part b: iStartTime property is the data type 30, or of type Date.  When I try to access the value of the property of iStartTime I got an error stating that ' the object does not support this property or method ".  Is there a special way to get the value of a property when the property is a date?

  Any suggestion would be appreciated!

  -Russ

  Option Explicit  ' force explicit declaration of all variables in a script.
  
    Dim MyElementList, oMyDataStore, StartDate, EndDate, MySearchString
  
  MyDataStorePlugin Sun: myDataStorePlugin = 'PDO '.
  
  	MyDataStoreParam Sun: myDataStoreParam = "AVL7D667E7B1EBFBAB6736F66010CCAB1AC8CB28FD2ROCMSAPP01600000000YESYESYESauto"
  
  	Set oMyDataStore = Navigator.ConnectDataStoreByParameter (myDataStorePlugin, myDataStoreParam)
  StartDate = Cdate (DateAdd("d",-3,Date)) + TimeSerial (0,0,0)
  
    EndDate = Cdate (DateAdd("d",0,Date)) + TimeSerial (23,59,59)
  '------------------------------------------------------------------------------------------------------------------------------------------------
  
    ' PROBLEM A:  THESE TWO SEARCH SHOULD BE THE SAME, BUT THEY RETURN DIFFERENT results.
  
    "This returns zero search results."
  
    Set MyElementList = oMyDataStore.GetElementList ("Action", "iStartTime > =" & StartDate & ") iStartTime<=" &="">
  
    MsgBox ("GetElementList count:" & MyElementList.Count)
  «That returns 18 results»
  
    Dial the navigator. Display.CurrDataStore.Browser.refreshALL
  
  	Call Navigator.Display.CurrDataStore.QueryForm.Clear
  
  	Call Navigator.Display.CurrDataStore.QueryForm.Conditions.Add("Measurement","iStartTime",">=",Startdate)  ' here is where I add a new condition.
  
  	Call Navigator.Display.CurrDataStore.QueryForm.Conditions.Add ("action", "iStartTime" "<=",EndDate) 'here's="" where="" i'm="" adding="" a="" new="">
  
  	Navigator.Display.CurrDataStore.QueryForm.Conditions.Logic = "C1 AND C2.
  
  	Navigator.Display.CurrDataStore.ResultsList.Elements.MaxCount = 10000
  
  	Call Navigator.Display.CurrDataStore.QueryForm.Search ()  ' and that triggers the search according to my requirements and the data store I went.
  
    MsgBox ("browser search count:"& Navigator.Display.CurrDataStore.ResultsList.Elements.Count ")
  '------------------------------------------------------------------------------------------------------------------------------------
  
    «PROBLEM B:  iStartTime IS DATA TYPE 30 OR DATE TYPE.» HOW TO ACCESS THE VALUE?
  MsgBox ("identification data type:" & Navigator.Display.CurrDataStore.ResultsList.Elements.Item (1).) Properties.Item ("Id"). DataType)   "Message:" data type Id: 3 ""
  
    MsgBox ("Id value:" & Navigator.Display.CurrDataStore.ResultsList.Elements.Item (1).) Properties.Item ("Id"). Value)   "Message:" Id value: 266888 ""
  MsgBox ("iStartTime data type:" & Navigator.Display.CurrDataStore.ResultsList.Elements.Item (1).) Properties.Item ("iStartTime"). DataType)   "Message:" type of identification data: 30 ""
  
    MsgBox ("iStartTime value:" & Navigator.Display.CurrDataStore.ResultsList.Elements.Item (1).) Properties.Item ("iStartTime"). Value)   ' results in error, the object does not support this property or method

  Sorry, I've replaced iStartTime by measurement_begin to make it work on my local database :-)

  The point is that the syntax of GetElementList is the following

  "iStartTime > = 20121201033; iStartTime<>

  When converting a CDate to str it cause string locale-dependent.

  But the suggestion would be to use the

  Dim query: query = oMyDataStore.CreateQuery set

  instead of the query string. Because he avoid conversion errors. Be aware that even a double value to a string in Germany for example will convert a written decimal number while the stringquery expects at this point notation.

  Set MyElementList = oMyDataStore.GetElementList ("Action", "measurement_begin > =" & RTT (StartDate, "#YYYYMMDDhhnnss") & ") measurement_begin<=" &="">

  must provide correct results.

• Search by wildcard characters in the data store

  I'm trying to search with a wildcard in a PDO data store.

  This produces a result:

  Back EMF Date: time 2012-08-20: 14:16:04

  But that does not

  Return *.

  How can I use wildcards in a search for data store?

  I guess that all of the following conditions must create correct results

  Dim query: query set = store. CreateQuery
  
  query. ReturnType = "measure".
  
  query. Conditions.Add 'Measure', 'name', 'is', ' back. "
  
  store. Search (Query)

  store. GetElementList ("Action", "name = % rear", true)

  store. GetElementList ("Action", "name = back *", false)

  store. GetElementList ("Action", "name = back *")

  Please take into account the fact that the PDO does not support case-insensitive query.

  I assume you are using an AVL Puma. You may need to set a switch in advanced the PDO connection dialog box. 'Use as instead of GAME'.

  In the connection setting, it appears as

  YES

• permit request for the data store

  I recently bought a license of data store for my virtual machine host. My question is, can I just replace the current key on existing servers with the key data store? Also, is the key to good for the 2008 and 2012 on the host servers?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to use the command to move the machine to a data store in another data store in WTT(Windows Test Technology) Atlas (2.7)?

  I searched doc help WTT Atlas, just found this: "the MoveMachine command allows users to move client computers between the basins of the machine. This command assumes that the user has permissions of correction to carry out operations and generates an error if this is not the case. "

  Note: this command just explain machine displacement between the watersheds of the machine instead of the data store.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I need to delete files from data store. Get the message "could not open because it was in use" How can I work around?

  9 my Windows update does not work. It is said to open "Datastore" and del; files allow you updates. When I try to open the data store in a first time, I wonder what program to use, and then said "can not open because it is used by another program."  This Windows Vista bit. I can't install Explorer 9 until I have a workaround. Help.

  Hello

  What is the exact error code or error message?

  I suggest to reset the Windows update components and then try to check updates, and then install the updates and check if it helps.

  How to reset the Windows Update components?: http://support.microsoft.com/kb/971058

  Solve problems when you can not install Internet Explorer 9: http://support.microsoft.com/kb/2409098

  I hope that helps!

• No network traffic VM being withdrawn and any data store Info

  I am running a trial of Foglight Enterprise visualization and upward and running things and an agent installed to my VMWare vCenter server infrustructure.  He shoots a lot of info, but none of the basic data store info is pulled (not the stuff that requires the Foglight for integration of storage) and none of the information network is taken for the individual virtual machine.  Guests and parents have netowrk showing traffic, but nothing on the side of the virtual machine.  The environment is configured with dvswitches for data, iscsi, vmotion, etc..  Any idea of what might happen, or I can look at?

  I see some errors in the agent log if I pull it down on data warehouses... Here's a sample:

  ERROR [Quartz [0] - 6] com.quest.agent.esx.task.HardwareTask - DatastoreInfo is missing for Datastore:datastore - 162
  2015-03-17 13:57:16.165 ECHO ERROR [Quartz [0] - 6] com.quest.agent.esx.task.HardwareTask - DatastoreInfo is missing for Datastore:datastore - 131
  2015-03-17 13:57:16.165 ECHO ERROR [Quartz [0] - 6] com.quest.agent.esx.task.HardwareTask - DatastoreInfo is missing for Datastore:datastore - 10985

  But apart from that, I don't see much... I do not see what seems to be warnings of Java, like this:

  2015-03-17 13:57:17.291 ECHO [Quartz [0] - 6] WARN com.quest.agent.esx.task.ESXAgentTask - inventory and relationship - FGLAM submission error: null
  java.lang.NullPointerException
  at com.quest.vmware.agent.history.samples.VMWHostVirtualSwitch__IMPL.__addPropertiesToNodeTree(VMWHostVirtualSwitch__IMPL.java:2418)
  at com.quest.vmware.agent.history.samples.VMWHostVirtualSwitch__IMPL.__addToNodeTree(VMWHostVirtualSwitch__IMPL.java:2348)
  at com.quest.vmware.agent.history.samples.VMWESXServerNetwork__IMPL.__addPropertiesToNodeTree(VMWESXServerNetwork__IMPL.java:1339)
  at com.quest.vmware.agent.history.samples.VMWESXServerNetwork__IMPL.__addToNodeTree(VMWESXServerNetwork__IMPL.java:1078)
  at com.quest.vmware.agent.history.samples.VMWESXServer__IMPL.__addPropertiesToNodeTree(VMWESXServer__IMPL.java:5015)
  at com.quest.vmware.agent.history.samples.VMWESXServer__IMPL.__addToNodeTree(VMWESXServer__IMPL.java:4213)
  at com.quest.vmware.agent.history.samples.VMWCluster__IMPL.__addPropertiesToNodeTree(VMWCluster__IMPL.java:10666)
  at com.quest.vmware.agent.history.samples.VMWCluster__IMPL.__addToNodeTree(VMWCluster__IMPL.java:10010)
  at com.quest.vmware.agent.history.samples.VMWClusterCollection__IMPL.__addPropertiesToNodeTree(VMWClusterCollection__IMPL.java:780)
  at com.quest.vmware.agent.history.samples.VMWClusterCollection__IMPL.__addToNodeTree(VMWClusterCollection__IMPL.java:702)
  at com.quest.vmware.agent.history.samples.VMWVirtualCenter__IMPL.__addPropertiesToNodeTree(VMWVirtualCenter__IMPL.java:9298)
  at com.quest.vmware.agent.history.samples.VMWVirtualCenter__IMPL.__addToNodeTree(VMWVirtualCenter__IMPL.java:8979)
  at com.quest.vmware.agent.history.samples.VMWModel__IMPL.__addPropertiesToNodeTree(VMWModel__IMPL.java:1304)
  at com.quest.vmware.agent.history.samples.VMWModel__IMPL.__addToNodeTree(VMWModel__IMPL.java:974)
  at com.quest.vmware.agent.history.samples.VMWModel__IMPL.buildSubmission(VMWModel__IMPL.java:919)
  at com.quest.vmware.agent.history.samples.VMWModel__IMPL.submit(VMWModel__IMPL.java:810)
  at com.quest.agent.esx.task.HardwareTask.submitData(HardwareTask.java:813)
  at com.quest.agent.esx.task.ESXAgentTask.submit(ESXAgentTask.java:208)
  at com.quest.agent.esx.task.ESXAgentTask.run(ESXAgentTask.java:201)
  at com.quest.agent.esx.ESXAgent.runTask(ESXAgent.java:518)
  at com.quest.agent.esx.ESXAgent.esxHardwareCollection(ESXAgent.java:718)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
  at java.lang.reflect.Method.invoke(Method.java:606)
  at com.quest.glue.core.services.EquivalenceInvocationHandler.invoke(EquivalenceInvocationHandler.java:76)
  at com.quest.glue.core.agent.AgentInteractionHandler.invoke(AgentInteractionHandler.java:177)
  to com.sun.proxy. $Proxy65.esxHardwareCollection (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
  at java.lang.reflect.Method.invoke(Method.java:606)
  at com.quest.glue.core.agent.scheduler.CollectorCallback.invokeCollector(CollectorCallback.java:246)
  at com.quest.glue.core.agent.scheduler.CollectorCallback.execute(CollectorCallback.java:146)
  to com.quest.glue.common.util.scheduler.quartz.QuartzScheduler$ ScheduledTaskSequentialJob.execute (QuartzScheduler.java:738)
  at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615)
  at java.lang.Thread.run(Thread.java:745)

  Thanks in advance!

  -Jake

  Hey Jake,

  I don't know what could cause this problem, it's a bit you added the role of travel data store for the Foglight service account in vCenter. Could you please create a Service request with support?
  https://support.software.Dell.com/

  Could you also attach a support package for FglAM to the case? Please put the number of file here, or send it to me via private message.

  Thank you.

  Gaston.

• Machine virtual IOPS / s report, how to display the name of the data store?

  Hi guys

  I am new to the Foglight community, this is a great tool, and I learn a lot.

  Currently I am trying to create a simple table that will show me metric of my VMware environment: Virtual Machine name, Datastore IOPS and data store.

  However I can't find how to include data store name in the table, because it is not a measure of the Virtual Machine. I think I need to expand the scope of my table to include VMware Datastore, but I don't know how to do this.

  -Mark

  

  Check the options available it seems that it can be done with WCF (the frame behind the Foglight dashboards).  We recommend generally customers who plan to build views WCF take adequate training or our PSO people engaged in it.

  In any case I can help show a quick example of how it's done.

  Please try this on a local/test server.

  Go to Configuration > definition >

  

  Make sure that you are in my definition, and click the icon to add a view. then choose from the tables and trees - oriented line table

  

  Give a name to the view, go public and make a portlet/reportlet and apply

  

  Switch to the configuration tab and click the change for the lines and choose a query

  Under query, expand the VMware and scroll down

  

  Until you can select the query for virtual machines

  

  And press the set button.

  Your view should look like this

  

  Now you must select the columns.

  Each column has a value you can edit and there is a button + to add additional columns.

  Lets start with the name of the virtual machine - click on the button to change to your default column and choose the context.

  

  Click on the drop down menu to enter key and choose the current line (virtual vmware machine)

  

  Click on the drop down menu to access path and scroll down until you can select the name and then click on set.

  

  You have created a table that lists the names of all virtual machines.

  You can click on save. and then click test, choose a time and click the result. A new window will open a show the list you of virtual machines.
  From here you can continue to add additional columns, each time choosing the key entry in the current line and the path to the metric/string to display.

  For example, the name of the data store.
  I change the module

  

  Click the configuration tab and click the icon to add a column

  

  For the column value, that I chose defined context once again, the key input is the current row and for the path, I expand the node for the data store

  

  And scroll until I see the Proprietename

  

  If you save and test you will see the result

  

  Keep adding columns and the data you want, notice that you have arrows that allow you to control the order of the columns.

  Note that you can click Show advanced configuration properties

  

  This will give you the opportunity to see the properties of the extra table, such as header - giving you the opportunity to give a more meaningful name (name of the data store, the name of the virtual machine, etc.) to the column header.

  

  You can now go you drag and drop the table edge/report and under my eyes, you will see your new view

  

  Drop it in the main view

  

  I hope this has given you the starting point to build this table.

  As I said, I strongly recommend going through our WCF training if you plan build more custom views or hire software Dell PSO Organisation to help build you views that correspond to your need.

  Best regards

  Golan

• Time range of statistical performance data store

  When I look at the performance of the data store tab in the performance monitor what time slot is used to generate the statistics?

  Hi Michael,

  The time slot is for 24 hours.

• I need a few persistent data store help of Pentecost

  Hi, I have a problem, try to store persistent data, I m using Eclipse 3.4.2 and BlackBerry plugin, as I check my work with the correct laboratory and my code hasn´t issues only a warning I see on the laboratory code it s normal, but when I try to run the Simulator I get this:

  "Eception exception: lack of measurement of the resource.

  and this is the code

  package com.rim.someguy;
  
  //Import section
  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.system.*;
  import net.rim.device.api.util.*;
  import net.rim.device.api.i18n.ResourceBundle;
  import java.util.*;
  
  public class measure extends UiApplication implements measureResource{
  
      //Variables for user interface fields
      private EditField numMeasureDev;
      private AutoTextEditField observation;
      private EditField lecture;
      private ObjectChoiceField choice;
      private EditField date;
  
      //Persistent data
      private static Vector data;
      private static PersistentObject store;
  
      //Resource bundle variable
      private static ResourceBundle _res;
  
      //MAIN
  
      public static void main(String[] args){
          measure app = new measure();
          app.enterEventDispatcher();
      }
  
      //Save Menu
      private MenuItem saveItem = new MenuItem(_res, SAVE, 110, 10){
          public void run(){
              StoreInfo nfo = new StoreInfo();
              nfo.setElement(StoreInfo.NUM, numMeasureDev.getText());
              nfo.setElement(StoreInfo.LEC, lecture.getText());
              nfo.setElement(StoreInfo.DAT, date.getText());
              nfo.setElement(StoreInfo.SEL, _res.getString(choice.getIndex()));
              nfo.setElement(StoreInfo.OB, observation.getText());
              data.addElement(nfo);
  
              //Storing data
              synchronized(store){
                  store.setContents(data);
                  store.commit();
              }
              Dialog.inform(_res.getString(APP_SUCCESS));
              numMeasureDev.setText(null);
              lecture.setText(null);
              date.setText(null);
              choice.setLabel(null);
              observation.setText(null);
          }
      };
  
      //Get Menu
      private MenuItem getItem = new MenuItem(_res, GET, 110, 10){
  
          protected int index;
  
          public void run(){
              synchronized(store){
                  data = (Vector) store.getContents();
                  LabelField label = new LabelField();
                  label.setText("Selecciona el dato a mostrar: ");
                  BasicEditField bef = new BasicEditField();
                  index = Integer.parseInt(bef.getText());
                  if (!data.isEmpty()){
                      StoreInfo nfo = (StoreInfo) data.elementAt(index);
                      numMeasureDev.setText(nfo.getElement(StoreInfo.NUM));
                      lecture.setText(nfo.getElement(StoreInfo.LEC));
                      date.setText(nfo.getElement(StoreInfo.DAT));
                      choice.getIndex();
                      observation.setText(nfo.getElement(StoreInfo.OB));
                  }
              }
          }
      };
  
      //Persistent Object
      static{
          //Resource Bundle
          _res = ResourceBundle.getBundle("measure");
  
          //Get the reference to PersistentObject and set value to Vector if is empty
          store = PersistentStore.getPersistentObject(0xdec6a67096f833cL);
          //key is a hash
          synchronized(store){
              if (store.getContents() == null){
                  store.setContents(new Vector());
                  store.commit();
              }
          }
      }
  
      //Class created for a persistent object StoreInfo
      private final static class StoreInfo implements Persistable{
  
          //Data for elements
          private Vector elements;
  
          //Fields
          public static final int NUM = 0;
          public static final int LEC = 1;
          public static final int SEL = 2;
          public static final int OB = 3;
          public static final int DAT = 4; 
  
          //in StoreInfo, add a new empty Vector with capacity of 4 elements and persist
          public StoreInfo(){
              elements = new Vector(5);
              for(int i = 0; i < elements.capacity(); ++i){
                  elements.addElement(new String(""));
              }
          }
  
          //Retrieve Vector element
          public String getElement(int id){
              return (String) elements.elementAt(id);
          }
  
          //Set Vector Element
          public void setElement(int id, String value){
              elements.setElementAt(value, id);
          }
      }
  
      //Measure constructor declaration
      public measure(){
  
          //Create a main screen
          MainScreen mainS = new MainScreen();
          mainS.setTitle(_res.getString(APPLICATION_TITLE));
          numMeasureDev = new EditField(_res.getString(TEXT1),"",
                  Integer.MAX_VALUE, EditField.FILTER_NUMERIC);
          lecture = new AutoTextEditField(_res.getString(TEXT5),"",
                  Integer.MAX_VALUE, EditField.FILTER_NUMERIC);
          date = new EditField(_res.getString(TEXT6),"");
          choice = new ObjectChoiceField(_res.getString(TEXT2),_res.getStringArray(OPTION));
          observation = new AutoTextEditField(_res.getString(TEXT3),"");
  
          //Adding elements to Screen
          mainS.add(numMeasureDev);
          mainS.add(lecture);
          mainS.add(date);
          mainS.add(choice);
          mainS.add(observation);
  
          //Adding menuItems to menu
          mainS.addMenuItem(saveItem);
          mainS.addMenuItem(getItem);
  
          //Push all elements to screen
          pushScreen(mainS);
      }
  }
  

  If anyone knows what I m hurt you showme how please!

  Two thoughts:

  1. If you have changed somehow the object type that you want to keep, you must remove the Simulator files before running again.
  2. How about you provide a clue as to where the class cast exception that happens? You are more likely to help in this way.

• How can I select a different data store for vm swap files?

  In Esxi 5.5, how can set up a separate data for the swapsfiles store.

  5.5, default will be in the same data store