Separate initialization and card settings

Similar Questions

• is there a way to create a single video file of two separate video and have their output to two separate projectors?

  I started using the first less than two months ago and my tech video background is rather limited . I'm doing an art project where I am projecting two different projections on a large wall that are designed to be in harmony and interact with each other.   I intend to use two laptops, one for each projector.  This is a possible problem.  The docents Gallery in this gallery of the University will have to turn everything on every morning, having to click on both computers at the same time to synchronize the images play together perfectly.  That simple I'd like to think, I know year 19 former students who are the docents sometimes fail to grasp what is obvious.  Is there a way to take two project files and create a single file that could play for two projectors from a laptop outside?  As a split screen monitors?  That way they click on a button. I don't know if it's possible, it can't be.  I just thought to deal with this problem as possible before that happens.   

  Has ny advice would be greatly appreciated.

  You can create a sequence on the front which is double width. For example, 1280 x 720 (720 p) becomes 2560 x 720, which is TWO 720 p side by side videos in a clip. For reading, you may be able to implement the graphics card settings to do it for you, or - get a Matrox DualHead2Go box. You must set the graphics card in your computer to the display size double width, such as 2560 x 720, and the single output of the computer goes in the DH2G unit, which separates the entry into two outputs independent of 1280 x 720.

  There are many models available, depending on whether you are working analog or digital graphics card. There is a ton of information available, including tools for configuration and testers to run on your system. It is important to seek and choose carefully, to make sure that the connections are compatible and that map display of your computer (and Matrox unit) will support both the specific resolution you are looking for.

  Matrox DualHead2Go Digital SE | Multiple monitors for laptop computers

  Thank you

  Jeff Pulera

  Safe Harbor computers

  www.sharbor.com

• This will remove all your custom settings and the settings of many extensions.

  Hello

  I was reading this article of knowledge and he says:
  "This will delete all your custom settings and many extensions settings."
  What are the custom settings?

  for example one of these and what else
  bookmarks?
  Add - ons?
  Top toolbar - Customize the toolbar
  Add on the toolbar
  Firefox/preferences
  Authorization Manager settings
  the new page open

  Corrupted preference file
  File preferences may be corrupt, Firefox prevents writing to it. If you delete this file, Firefox will automatically create another when it comes to.

  Here's how to delete the prefs.js file.

  This will remove all your custom settings and the settings of many extensions.
  Open your profile folder:

  In the menu bar, click the Help menu and select troubleshooting information. The troubleshooting information tab will open.

  In the section the Application databases, click view in the Finder. It will open a window with the folder of your profile.
  Note: If you are unable to open or use Firefox, follow the instructions for finding your profile without having to open Firefox.

  In the menu bar, click Firefox and select Quit Firefox

  Locate the prefs.js file (and, if applicable, the prefs.js.moztmp file).
  Delete these files and files prefs - n.js where n is a number (e.g. prefs - 2.js).
  If there is, remove the Invalidprefs.js.
  Restart Firefox. You should now have reset all preferences.

  Based on information from preferences not saved (mozillaZine KB)

  See also http://kb.mozillazine.org/Profile_folder_-_Firefox

  #1: there are too many pref for all kinds of adjustment which will offer a recipe of what you lose and how to keep certain parameters.
  It is possible to copy specific lines of a prefs.js to this file in another profile or restore some settings after deleting this file in the current profile folder.

  All the prefs that show as a user defined and appear in bold on the topic: config page are stored in the prefs.js file.
  
  This includes the changes you make and data Firefox itself and extensions store as data/parameters in a pref.
  It's

  #2,3: the localstore.rdf file stores the toolbar configuration and other data.

  #4: the current versions of Firefox shows the menu entry "Tabs" at the top menu ' display > toolbars "and" Firefox > Options ' and in the menus toolbar pop-up if the tabs are not in the default position on the top.
  
  If the notches located on the top and the menu entry is not available and you want to move the tabs under the navigation toolbar, then you have to toggle the pref browser.tabs.onTop false on the subject: config page.
  
  A restart of Firefox is necessary for updating the menu entry to display or remove.

  Note that this pref will no longer effect when the code Australis lands on the output channel (code Australis will probably land in Firefox 29).

  #5: see https://support.mozilla.org/kb/Clear+Recent+History

  Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-ups, installing the software, stored passwords in permissions.sqlite and other site specific data stored in content - prefs.sqlite (including zoom on the page).

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  #6,7: history of search bar is the story of the search bar (Google) on the Navigation toolbar.
  
  All recorded data to a form on a web page is included in the data in the form, but you can not separate and distinguish the two.
  
  Browsing history is the history of the web pages you have visited.

  • Form history control: https://addons.mozilla.org/firefox/addon/form-history-control/
  • Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/

  #8: session cookies are always kept in memory and never stored on the disc in cookies.sqlite
  
  You can only delete specific cookies manually in the Cookie Manager or leave cookies expire when you close Firefox to make them behave like session cookies.
  
  Cookies of other compensation will include all cookies and don't obey the exceptions that you have made.

  #9
  Data stored in storage DOM is not stored in cookies.sqlite, but it is generally stored in the webappsstore.sqlite file or possibly in the form of data in IndexedDB.

  • https://developer.Mozilla.org/en-us/docs/Web/Guide/API/DOM/Storage
  • https://developer.Mozilla.org/en-us/docs/IndexedDB
  • https://addons.Mozilla.org/en-us/Firefox/addon/Foundstone-HTML5-local-storage/

• Hub BT 1800 HG wireless and card PC Laptop/1060

  Hello

  I have a portable S2410-304 Toshiba without a Wireless LAN mini. I connected the laptop to the BT Wireless Hub via the Ethernet connection without no problems whatsover, and the broadband connection is great. However, I tried to get the BT Voyager 1060 portable Wireless PC Card to work with no joy either.

  The laptop has Windows XP SP2 and wireless broadband is via the supplied software, rather than through Windows XP. The laptop recognizes the card in the PCI slot, but for some reason any does not have a signal coming through the router.

  I have another laptop and I have the Ethernet connection and wireless LAN works without any problem. I've uninstalled and reinstalled the software, swapped the PCI slots and (as I have two cards) even tried the other card (and they both work in my notebook to another). I contacted BT and they told me to try uninstalling Norton and make sure that the Windows Firewall has been turned off and re - install. Still no joy.

  Does anyone have any ideas as to why the router and the map don't communicate wireless, and yet they're fine an Ethernet cable?

  Thank you

  Steve

  [Edited by: admin]

  Hi Lim

  If the card is recognized and installed properly there must be a problem with BT card settings and configuration of the card. The only thing I can recommend is to check all the settings, especially in the Center BT wireless.

  Good bye

• Maps of initialization and closing of HW

  Hello

  Earlier in each test case, I used to initialize the card, then close the cards once the test is completed. Why I use for each test case. But I think that's not good way of programming to initialize and close the cards each time. I want to initialize all the cards once the user connections and close all the cards when the user opens a session stop/exit. Yes, by doing this it will not affect my program or execution? or y at - it a better method?

  Kind regards

  Renaux

  Yes.

  You can open the task ID in the first instance and run the software, generating signals, close the ID/task when you exit the software.

• My wife and I use an address e-mail, but with separate wallpaper and parameters of separate accounts. How do I do this in W8?

  I just bought two new Dell computers, which are set up side by side on a LAN, one for me and one for my wife.  When configuring the computer of my wife, she is not able to create a new user account because mine has already used the same email. I woke up, the menu wallpaper tiles and start my computer appeared on my wife until I started to put in place, and the changes made on his computer appeared on mine.

  I want to be able to create two accounts separate, each able to read email family, but with different images of wallpaper and screen settings, arrangements of different start menu and names of different accounts and passwords that are independent.  In fact, I want several user accounts on each computer in the privacy for files between users.  I had it on XP.  How he do on W8?

  Thank you for your attention.

  If you want to change your current account at the local level and then put your mouse in the top right Conner and go on settings and click on it need to change PC settings "found inside" click on it then go to users in the left menu and click on that and then pressing the switch to a local account This can be found under the user name

  Sean

  hope that this help please reply if you need more help then please answer if it worked for you answer please

  Thank you

• ePrint and change settings

  I've seen many people ask how to change the file formats which are sent to ePrint. How to change the police, or the control, where the image on the page. Or not the printer prints the body of the email, just attachments.  The answer to all of these types of applications is this: as of today, the way a print/attachment work is sent to the ePrint printer is how it will print.

  All editing must be done in the file before sending it to the ePrint. Images and attachments will be printed on a separate sheet and the body of the email will be printed separately of the spare part.

  The settings that you can change in ePrint Center are the color modes and the size of the paper that lies under ePrint settings.

  As always, I hope this helps the community.

• Record WLST scripts for the card settings

  Hello

  I'm new to the WLST Script recording tool.

  I am trying to save my settings for JmsAdapter create a new Pool of outbound connections, but the registration tool does not seem to be able to capture changes in the settings of the map file is empty after the changes have been made.

  Anyone know why this is?

  Is there a way make the folder working tool for the card settings?

  If this is not the case, if anyone knows the necessary functions/directories in a WLST to create outbound connections Pools in the JMSAdapter settings?

  Any help will be very appreciated!

  Thank you

  Al

  JMS adapter uses the deployment plan where wlst can't save this.

  The recording feature intercepts calls JMX and translated into corresponding WLST scripts, as well as features that use deployment plans fall outside the coverage area of the "Record" feature.

  Best regards

  Vivek Vishal

• Merger of option buttons that are on separate pages and contained in the same subform

  My question can best be described as follows:

  1. I have a two page (form) document... PAGE A and PAGE B, which are considered as subforms.

  2 page A is set on "flowed - high to low" and has a total of 4 pages when rendered.

  3 A page PAGE 1 contains a group of buttons radio Page 2 contains also a group of radio buttons that should be part of the radio group on page 1, but due to the design running to a second page, it does not.

  4. in view of the foregoing, I am looking for a way to "merge" the games of buttons two radio one, while they remain on separate pages. I know you can merge the Group of exclusive radio buttons that are on the SAME page, but I did not understand how to proceed when they reside on different pages. At first, I was able to do work by giving the two groups of radio the same name and the same parameter of overall liaison, but it became a question with question #5 below.

  5 PAGE also has an ' Add' button which creates a new instance of A PAGE, when you press on. Having the option button global value binding, it automatically value groups radio every time that a new instance of the subform is/has been created... who must be provided.

  The question now is... is there a way to separate radio button group merge two that are on separate pages and they have still work properly as new instances of the subform are created?

  You can probably achieve this by writing script...

  If you want to exclude two radio buttons that are on separate pages:

  (1) change them boxes. and bottom of properties...

  Appearance: Solid circle

  Check the Style: Circle.

  In this way they looks like you are using a radio button.

  (2) write the script to the Click event of the checkbox to disable the check box on the second page.

  Page2.CheckBox2.RawValue = 0; (Or what ever you want when it is not checked.

  (3) Similarly, write code in the Click event of the checkbox in the second page.

  Page1.CheckBox1.RawValue = 0; (Or what ever you want when it is not checked.

  (4) write the code below in the initialization event of each check box, as below...

  The Initialize event Page1.checkBox1

  If (this.rawValue == "1") {//(Or what ever value you want when it is checked.

  Page2.CheckBox2.RawValue = 0;

  }

  The Initialize event Page2.checkBox1

  If (this.rawValue == "1") {//(Or what ever value you want when it is checked.

  Page1.CheckBox1.RawValue = 0;

  }

  Thank you

  Srini

• I can not find where to change the privacy and security settings.

  I looked towards the top of the article about what said you to check / uncheck the boxes, but don't tell me where these boxes are.

  Hello

  1. Open the Firefox Preferences tab as follows: click the menu button

     

     and select Preferences.

  2. In the Firefox Preferences tab, click the Security tab (for Security and password settings) or Privacy (for confidentiality, and-not-track browsing history settings)

  Thank you.

• Yahoo email won't load and store settings in the OS x mail application

  I tried to mail yahoo mail OSX El Capitan. Using the Yahoo tab in the box menu for the establishment of new accounts I can get the drop-down list to enter my email address that is recognized by Yahoo saying welcome + the address just entered. I press next to enter my password it is accepted. seconds after the drop falls again ask for the e-mail address and the password again. This time, I get the loading wheel which runs forever. After going to the doctor of connection I find mail forgot all my e-mail address and yahoo settings. It doesn't let me manually as some of the input fields are eliminated. My web yahoo mail warns me that my iMac has connected twice to my yahoo account. I went back into the box selection of accounts once again, before other suppliers named and pressed (other) then I found a button with a blue representative logo email that I have lived the same as before proceeder. Guess what? It loaded perfectly! The only problem is that this article only gives me the apps. Mail and Notes.Nothing else is available. If the Yahoo logo button had loaded, I would also have other Contacts apps.like & calendars + two other institutions. How can I get the missing apps to work using the mail icon settings?

  Is this your first attempt using Yahoo! mail on Mac? I had some weird problems with my own Yahoo! account today, and I know that sometimes he just goes a bit wonky and correct itself on its own. Unfortunately, it's a big part of the reason I do not use my Yahoo! account more.

  Have you tried to manually configure the account as an IMAP account? Y at - it none of the settings of your Yahoo! account to restrict connections and others? You have two-step verification enabled for your account?

• Equium L20-198: error 0271 check date and time settings.

  My apologies if this appears twice, I tried to change and I somehow lost my thread.

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  > Is it possible that the CMOS battery charge the main battery and this is my problem?
  Well, the CMOS battery can be charged with AC adapter but the laptop must be turned on for about 18 to 20 hours.
  It s not I known if battery CMOS takes the power of the main battery
  Usually the CMOS battery should always charge in work and when the laptop is plugged in
  So, theoretically the main battery has no influence on the CMOS battery.

  I think it might be a mobo problem, I think this could be a reason for it

  By the way; in most cases the CMOS battery is not removable... so I wonder how did you repalce this CMOS battery...

• L20-198 error 0271 check date and time settings

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

• Toshiba 40TL938G - find the date and time settings

  I have a 40TL938G and I can't find the date and time settings.
  Can someone help me?

  SSY
  I read the manual and it does ' t say anything about these settings.

  THX

  In the settings of digital television, you should see the option called local time settings

  To display the time on the TV you press the sign of the small clock on the remote control while watching a normal TV show (analog only)

• Tecra S1 - USB ports (all) and card reader does not

  Hello

  Just got a 2nd user Tecra S1. I was told that the drive SD card and USB ports do not work. Card reader (and card PCMCIA USB ports) works as well as the ps/2 port.

  Any ideas anyone? USB ports turn on power on indicators key USB etc but nothing is recognized under XP.

  See you soon

  Hello

  Maybe the USB ports listed in the devices with exclamation points Manager yellow. Did you check that?
  In addition, I would recommend updating the chipset driver. Visit the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you also received a Toshiba Recovery disk you may have to use it. The HARD disk will be wiped and XP will be installed all the drivers and tools.

  Good bye