SequenceFilePostResultListEntry call does not change output result

Similar Questions

• Change the size of the resolution and the image does not change the result on the screen?

  
  I use Photoshop CS3. I'm changing the resolution of several images that will be printed in a newspaper. So the current images are 72 dpi and really huge - for example 36 x 27 inches (size of the document), and when I change it to 300 dpi, the size of the image to reduce to about 8 x 6 inches, as I hope. But the image I see on the screen does not change. Thus, for example, when I open the image originally, it's 33% and the entire image is visible. After I change the resolution and the size of the image has changed accordingly, the image appears to be always the same and it remains at 33%. The image should not shrink on the screen because its size has been reduced? Or if she stays the same on the screen, the percentage should not change? I mean if the size of the document is now 8 x 6, it should be able to display at 100% and not to fill my whole screen... I'm so confused. Thank you...

  Gradded,

  The "Size of the Document" of the dialog box size of the Image is just to specify the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor does not care something about PPI. The monitor contains a number of pixels and after you change this setting, ppp, the monitor will always be the same number of pixels.

  As long as you leave the box "Resampling" disabled, will not change the size of your image (pixel Dimensions). You won't see any change on your monitor. If you check "Resample", then the size (in pixels) of your image will change.

  I hope this helps.

• I have a desktop computer and a laptop. When I change a bookmark on one, it does not change on the other, even if I am connected to sync

  I have a desktop computer and a laptop.
  When I change a bookmark on one, it does not change the other even though I am connected to the sync.

  Sync is meant to do?

  Most probably one of the two computers has corrupted data which does not allow the sync complete.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• Application file name does not change

  After I go to BUILD > CONFIGURATION > MANAGE CONFIGURATION > RELEASE > EDIT > TARGET SETTINGS, then type a new name in the APPLICATION FILE field, or actually browse and select the file I wanted he call to, and select OK > DONE > DONE. It does not change.

  Worm 2010

  Have you tried to give him directly into the Build > parameter control targets, by selecting the Release configuration, by typing the name? I always do this way and the name actually changes.

• Global VI on the low level does not change from front panel indicator

  I attributed to a global variable (CMM_SN_Global 3.vi) to a value in a Subvi two levels down from the façade. When I run the VI of Panel before a flag set by the overall does not change even if the global variable is assigned the correct value until later in the program. Shouldn't be an indicator on the Panel before the value assigned to the global as soon as the world is assigned a value. Or is it not true?

  Thank you.

  Chuck M.

  Hi Chuck,

  If you asked for examples:

  

  What we have here:

  -the select node with these 3 Boolean constants is really absurd (aka RubeGoldberg) the output is always TRUE!

  -l' 'position' indicator belongs outside the case statement, any write on this indicator ("unnecessary local"!)

  -Why is there an additional wait inside the case? Do you really need that as you expect in the while loop?

  -It is not recommended to compare floats for equality - as you do here with the structure of your case when wire you a DBL to the input switch. Why not convert the data itself in full to be on the safe side?

  Then you say: "my plan is to have ten independent loops like the top.

  This is the reason for using subvis. You can have as many loops as you want, but only need to code once the algorithm ("duplicate code").

  More comments on why I recommend some "realignment"?

• DMZ-Link bandwidth does not change the routing table countin traffic

  Hey guys

  I'm INE laboratories dong and shoved a weird one that delivers.

  I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.

  Here is my configuration:

  Rack1R6 (config) #do sh run | dry BGP

  router bgp 100

  no synchronization

  The log-neighbor BGP-changes

  BGP dmzlink-bw

  155.1.146.0 netmask 255.255.255.0

  aggregate-address 155.1.0.0 255.255.0.0 summary only

  neighbour 54.1.1.254 distance-54

  neighbor 54.1.1.254 dmzlink-bw

  neighbour 155.1.67.7 distance-300

  neighbour 155.1.146.1 distance-100

  155.1.146.1 neighbor send-community times

  No Auto-resume

  Rack1R6 (config) #.

  Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  Version of BGP table is 35, local router ID is 150.1.6.6

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 54.1.1.254 0 54 I

  * > 28.119.17.0/24 54.1.1.254 0 54 I

  * > 112.0.0.0 54.1.1.254 0 0 54 50 60 I

  * > 113.0.0.0 54.1.1.254 0 0 54 50 60 I

  * > 114.0.0.0 54.1.1.254 0 0 54 I

  * > 115.0.0.0 54.1.1.254 0 0 54 I

  * > 116.0.0.0 54.1.1.254 0 0 54 I

  * > 117.0.0.0 54.1.1.254 0 0 54 I

  * > 118.0.0.0 54.1.1.254 0 0 54 I

  * > 119.0.0.0 54.1.1.254 0 0 54 I

  r > 155.1.0.0 0.0.0.0 32768 I

  Rack1R6 (config) #do sh ip bgp

  Version of BGP table is 35, local router ID is 150.1.6.6

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * i28.119.16.0/24 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254                             0 54 i

  * i28.119.17.0/24 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254                             0 54 i

  * i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I

  * > 0 0 54 50 60 54.1.1.254 I

  * i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I

  * > 0 0 54 50 60 54.1.1.254 I

  * i114.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i115.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i116.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i117.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i118.0.0.0 204.12.1.254 0 100 0 54 I

  Network Next Hop path metrics LocPrf weight

  *>                  54.1.1.254               0             0 54 i

  * i119.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  r i155.1.0.0 155.1.146.4 0 100 0 I

  r>                  0.0.0.0                            32768 i

  s > 155.1.146.0/24 0.0.0.0 32768 0 I

  * > i205.90.31.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  * > i220.20.3.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  * > i222.22.2.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  Rack1R6 (config) #.

  # now R4 configuration

  Rack1R4 (config) #do sh run | dry BGP

  router bgp 100

  no synchronization

  The log-neighbor BGP-changes

  BGP dmzlink-bw

  155.1.146.0 netmask 255.255.255.0

  aggregate-address 155.1.0.0 255.255.0.0 summary only

  neighbour 155.1.45.5 distance-200

  155.1.45.5 route-neighbour card GAME-54 on

  neighbour 155.1.146.1 distance-100

  155.1.146.1 neighbor send-community times

  neighbour 204.12.1.254 distance-54

  neighbor 204.12.1.254 dmzlink-bw

  No Auto-resume

  Rack1R4 (config) #.

  Rack1R4 (config) #do sh ip bgp Synt.

  Local router BGP 150.1.4.4 identifier UNDER number 100

  BGP table version is 18, table 18 main routing version

  15 entries for network using 1980 bytes of memory

  18 entries for path using 936 bytes of memory

  9/7 BGP path/bestpath attribute entered using 1512 bytes of memory

  3 entries for BGP AS-path ACCESS using 72 bytes of memory

  1 entries PMO community, using 24 bytes of memory

  0 cache entries of BGP route-map with 0 bytes of memory

  0 cache entries of filter-list BGP using 0 bytes of memory

  Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory

  BGP using 4620 total number of bytes of memory

  Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds

  Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd

  155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3

  155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3

  204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10

  Rack1R4 (config) #do sh ip bgp

  BGP table version is 18, local router ID is 150.1.4.4

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 204.12.1.254 0 0 54 I

  * > 28.119.17.0/24 204.12.1.254 0 0 54 I

  * > 112.0.0.0 204.12.1.254 0 54 50 60 I

  * > 113.0.0.0 204.12.1.254 0 54 50 60 I

  * > 114.0.0.0 204.12.1.254 0 54 I

  * > 115.0.0.0 204.12.1.254 0 54 I

  * > 116.0.0.0 204.12.1.254 0 54 I

  * > 117.0.0.0 204.12.1.254 0 54 I

  * > 118.0.0.0 204.12.1.254 0 54 I

  * > 119.0.0.0 204.12.1.254 0 54 I

  * > 155.1.0.0 0.0.0.0 32768 I

  s > 155.1.146.0/24 0.0.0.0 32768 0 I

  * i205.90.31.0 155.1.13.3 0 100 0 200 254?

  *>                  155.1.45.5                             0 200 254 ?

  * i220.20.3.0 155.1.13.3 0 100 0 200 254?

  *>                  155.1.45.5                             0 200 254 ?

  * i222.22.2.0 155.1.13.3 0 100 0 200 254?

  Network Next Hop path metrics LocPrf weight

  *>                  155.1.45.5                             0 200 254 ?

  Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  BGP table version is 18, local router ID is 150.1.4.4

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 204.12.1.254 0 0 54 I

  * > 28.119.17.0/24 204.12.1.254 0 0 54 I

  * > 112.0.0.0 204.12.1.254 0 54 50 60 I

  * > 113.0.0.0 204.12.1.254 0 54 50 60 I

  * > 114.0.0.0 204.12.1.254 0 54 I

  * > 115.0.0.0 204.12.1.254 0 54 I

  * > 116.0.0.0 204.12.1.254 0 54 I

  * > 117.0.0.0 204.12.1.254 0 54 I

  * > 118.0.0.0 204.12.1.254 0 54 I

  * > 119.0.0.0 204.12.1.254 0 54 I

  * > 155.1.0.0 0.0.0.0 32768 I

  * > 205.90.31.0 155.1.45.5 0 200 254?

  * > 220.20.3.0 155.1.45.5 0 200 254?

  * > 222.22.2.0 155.1.45.5 0 200 254?

  Total number of prefixes 14

  Rack1R4 (config) #.

  # and where is the real problem, R1

  Rack1R1(config-Router) #do sh ip bgp

  Version of BGP table is 15, local router ID is 150.1.1.1

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * i28.119.16.0/24 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i28.119.17.0/24 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I

  * > I 204.12.1.254 0 100 0 54 50 60 I

  * i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I

  * > I 204.12.1.254 0 100 0 54 50 60 I

  * i114.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i115.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i116.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i117.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i118.0.0.0 54.1.1.254 0 100 0 54 I

  Network Next Hop path metrics LocPrf weight

  * > I 204.12.1.254 0 100 0 54 I

  * i119.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i155.1.0.0 155.1.146.6 0 100 0 I

  * > I 155.1.146.4 0 100 0 I

  * > 205.90.31.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  * > 220.20.3.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  * > 222.22.2.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0

  112.0.0.0/8, version 4 BGP routing table entry

  Paths: (2 available, best #2, table by default-IP-Routing-Table)

  MPIO: eBGP iBGP

  Announced for the update-groups:

  1          2

  54 50 60, (from a customer-RR)

  54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)

  Origin, IGP, 0, 100, valid, internal multipath localpref metric.

  DMZ-Link Bw 250 KB

  54 50 60, (from a customer-RR)

  204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)

  Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best

  DMZ-Link Bw 12500 KB

  Rack1R1(config-Router) #do sh ip route 112.0.0.0

  Routing for 112.0.0.0/8 entry

  Known through 'bgp 100', 200, 0 distance metric

  54, internal type tag

  Last update of 204.12.1.254 ago 00:15:30

  Routing descriptor blocks:

  204.12.1.254, 155.1.146.4, there is 00:15:30

  Path metric is 0, number of shares of traffic 1

  AS hop 3

  Beacon road 54

  * 54.1.1.254, 155.1.146.6, there is 00:15:30

  Path metric is 0, number of shares of traffic 1

  AS hop 3

  Beacon road 54

  Rack1R1 (config - Router) #.

  as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...

  can you please help me if I makeover anything in my setup?

  Hello

  Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.

• Old image does not change when replaced

  I have a form with an image that uses a relative file location URL.  When I open the resulting PDF form, the image appears without any problem.  Then I go out to the location of the file and replace the image with a new one.  The new picture has the exact name as the old image.  When I open the form the old image will appear in the form.  This happens even when I remove the old image of the server.

  I have not incorporated the image in the form I want to be able to change the image without having to re - open the form in the designer and reregister the outside.

  Can you please explain why the picture does not change even if I replaced with one that has the correct name and path as the original relative.

  See you soon,.

  Barry Graham

  Hello

  Have you set the relative relationship in the LC Designer?

  Once the form is rendered, it uses the link to display the image file in the ImageField object. Once the form is rendered the image data is stored in the PDF form and becomes part of the file.

  So there no need to return the server to get the data again.

  In addition, the image Embed in Designer checkbox can be confusing (he made me at least until John Brinkman put me straight). When you select embed, it means that the image data be available for other developers who open the form in the designer of the LC. When it is unchecked, the image data is already contained in the PDF file, when the user opens the form in Acrobat/Reader.

  See an example here: http://assure.ly/mcFrC6.

  Hope Steph,

  Niall

• Why Muse does not change the names of certain images or property when exporting to HTML format?

  Why Muse does not change the names of certain images or property when exporting to HTML format? and how can I keep the integrity of the name that the image/file has been saved as?

  General Muse renames a file imported image if the image is modified to achieve the design or the exit, or if the name change was necessary due to a name conflict (two different images which had the same file name when importing).

  The design-time features that will modify an image include cropping, rotation, rounded corners and effects (drop shadow, bevel or glow). It is also true that, in rare cases, Muse will merge an image with other content to optimize page download performance. An example of this would be to place a background image on a block of text that contains the text using system fonts. In this case, rather than a single image for text output and a separate image for the background, Muse will combine the two into a single image.

  If an image is placed or imported by Muse and not tampered with, the image is crossed without modification (including the file name) at export/publish (with him except that Muse will always rename if two different images with the same name).

• Access policy does not change the status of resource

  I have a set access policy to assign a role and a resource to anyone in a specific group. The policy work very well for those who have never had the resource before. For people who were in a disabled state resource - access policy is to add the role, but it does not change the State of the resource from disabled to enabled (or put into service).
  
  How can I do so it adds not only the role, but he changes the State of the handicapped resource? Thanks in advance.

  Simple!

  -Create an adapter of the entity during the prior insertion of the Members Group.Group of the user who will be called on the user being part of the group. Add custom java code that will check the resource assigned to this user and confirm if its there and in a disabled state. If its disabled and then turn it back on, otherwise just hang on and do nothing.

  Thank you

  Sunny

• New IMac does not, Apple does not change

  https://www.YouTube.com/watch?v=UdUY038FwCI

  I have this problem since I was the imac. I pointed out in 3 days. Apple does not change because I didn't buy that at its retailer. 3 months, still waiting.

  What should I do?

  Everyone pays even, but I get nothing (same lack offers as a freelancer). I think it's fair. What am I, I guess what to do?

  Run the Apple Hardware Test > Apple Hardware Test - Apple help

• iPad smart keyboard does not change the language after updating iOS 10

  Smart keyboard on the iPad (in English) does not change after updating to iOS 10, put in language. He's stuck in English. Pressing on the globe (change language button) displays the language menu, but after selecting the language, the keyboard is still in English.

  I have reset all settings. Erase all keyboards, adding them again.

  Any ideas? Does anyone have the same problem?

  Howdy, rapretzan! Thank you for using the Apple support community!

  Great work to solve your problem until now! Apparently to reset all the settings and erasing/re-adding keyboards for iPad Pro still isn't allowing you to change the language since the upgrade to iOS 10. I'll be happy to help you.

  How to back up your iPhone, iPad and iPod touch - in order to get your keyboard working properly, I'll have reinstall you the iOS. Please backup your personal data to keep it safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on a computer to clear completely your iPad you can install a new copy.

  The first time, select "Set up as new iPad" and ignore connecting them to iTunes and App Store and iCloud. See if you are able to get back with your Smart keyboard languages. If you are, go to the next step.

  Restore your iPhone, iPad or iPod touch from a backup - use this article to guide you through the steps to send your personal information to your iPad Pro.

  Have a great weekend!

• Home page does not change!

  My home page has changed to http://search.findwide.com/v/10?guid={C764CB4C-DADB-47E9-83F6-A1585921345D} & noredirect = 1.
  I restored it by default, but the home page does not change.
  I uninstalled Firefox so that twice but the homepage does not change!
  It's boring. Please help me restore the default home page.
  Best

  See this - http://malwaretips.com/blogs/remove-findwide-search-virus/

• Link color does not change after you click in Firefox for Android.

  Why the link I click does not change its color in Firefox for Android from blue to purple?

  Depends on the specificity of the site you click on links on.

• Why the police does not change in itself?

  I use a Mac, and continue to change my fonts. Today, they are italicized in the browser and my gmail.

  It does not change everytime I open, and sometimes it changes while it has already been opened for awhile... I know weird.

  The fonts changed to arial, I hope it will work.

  THX

• Zoom percent does not change

  I have 29 installed Firefox and I added the zoom to the new menu box.

  When I touched the most or minus the percentage does not change, but it is at the origin of the content of the page get the smaller or more.

  Hello, you can try to replicate this behavior while you run firefox in safe mode, once?

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox