Serial number DPS app builder

Similar Questions

• DPS App Builder requires a serial number for assets

  I am a user of creative cloud and wonder a serial number inside DPS App Builder.

  This is a known issue and adobe has released a fix, this however doesn't fix it for me:

  http://helpx.Adobe.com/Digital-Publishing-Suite/KB/DPS-CCM-users-get-activate.html

  I have the latest indesign CC and you follow the steps to remove and reinstall DPS App Builder three times with the digital edition Patch. If you follow the instructions to select "create app' inside the constructor folio in indesign - it launches DPS App Builder." It automatically connect me and takes me to the "start page" where I can eith "learn more" or manage.
  

  I expect that I would take to another screen having recognized that I am creating an application - in which I can add the assets directly.

  From there I selected "continues to manage view" and then click on 'New' and load in the .zip (which had been created by the DPS producer: Organizer) and assets (icons).

  The next step is to activate but I amd asked a serial number.

  

  After update indesign, following the instructions to remove and delete the DPS App Builder and reinstall. Ensuring that I clear the cache of the browser and sign everything - why, after following the instructions I I always request a serial number?

  A few details:

  DPS App Builder is V 3.0.0 (r30.16)

  InDesign 9.2.1 (CC)

  Mac OSX 10.9.3

  I followed the installation instructions: AdobeDigitalPublishingPatch-CC - 30.0.1

  I also tried (as recommended by adobe) reinstall the Panel of Folio Builder - strangely for CS 5.5 (FolioPanel - CS5.5 - 30.0.1)

  Really want to support. Thank you!

  Good question and check what I think I spotted the problem with that.

  A secondary account is joint membership plan.

  It was my mistake forgetting it - the license should have set up at the main account, however after moving from country Adobe would not be welcome.

• Continue to request a serial number when downloading the application through DPS App Builder

  I have already created an app via InDesign and DPS App Builder, but the program won't let me download the app! He says I need to activate the product with a serial number, but since I bought a creative cloud membership, I don't have any number. Anyone know what I can do to make it work?

  Here are the prints with messages

  

  

  Make sure that you follow Cloud Creative workflow by clicking Create App Panel Builder Folio. Also your remove your current build, reinstall DPS App Builder and try again. If you do not have the button supprimer delete in your App Builder, let us know.

• DPS App Builder: Large number of folios - where the setting?

  In accordance with article

  http://helpx.Adobe.com/Digital-Publishing-Suite/help/whats-new-release.html

  It should be possible to speed up the update of the library when you have a large amount of sheets.

  "Improved behavior of applications with a large number of folios (business) If an app includes a large (for example, 1,500) number of folios, it takes a long time for the updated library. If you select a setting DPS App Builder, you can use your right to control what pages are included in the library is updated. »

  Can someone tell me where this "DPS App Builder layout"?

  Found, but it is in the section titled "bar of Navigation.

• Updated an application enabled in DPS APP Builder

  Hello

  I have a question of understanding, and the guide adobe is not clear about this:

  1. I created an application (simple edition) with the developer App Builder, active and tested version DPS.

  2. the article of my folio was published to kill a few errors.

  3. now I want to update my app, but how? If I create a new application, which is with my serial number, I've used for my first version.

  4. There seems to be no way to update the folio in the DPS App Builder...

  The guide Adobe says:

  ' If the application needs to be changed, change the folio, and then use the DPS App Builder to modify and . create another development App. delete the previous iTunes and your iPad application install the new application and retest. »

  Does create a new application? It's fine with me, but once again: How can I activate the new version with my serial number. It would suffice to remove the first version?

  Thank you very much in advance!

  Florian

  Hi Neil,

  I had help by Laxman Negi. To avoid these problems in the future I will join the creative cloud. Planed to do this anyway.

  Best regards

  Florian

• DPS App Builder: Created App is not available after activation

  That's what I did:

  1 created an application in the DPS App Builder

  2 activate the application with my serial number for simple editing

  3. download the version of app development

  4 tests

  5. mounting of the folio

  6. creating another development in the DPS App Builder application

  Here's the problem:

  1. There is no first version of the application (with serial number enabled) available in the DPS application builder

  2. I can't use the serial number, once again, because it is already activated

  Additional information (maybe useful):

  1. I opened https://digitalpublishing.acrobat.com and identify yourself. If I check the download for the DPS App Builder it is said, that there was no App Builder not found on my system. In other words, of course, not true.

  2. I use a different adobe ID to work with DPS and creating folios I used for licening CS 5.5...

  3. I reinstalled the DPS App Builder after discovering, that enabled application has disappeared.

  My question:

  1. How can I find the application enabled and disable serial number?

  2. How can I make sure, that the new app disappear?

  Thanks in advance and best regards

  Florian

  Hi Florian.

  I can help you, please PM me the email ID used to connect to the application builder to activate your app

  Thank you

  Lohrii

• update my .ipa in DPS App Builder for the test does not work

  Hello

  I create my .ipa file in DPS App Builder for the test on my iPad, before I have to publish on the app store. No problem. I have tested and seen a few changes to make. I made the changes on my folio, updated in the generator of folio of indesign (in the cloud). Then I go back to DPS App Builder and rebuild a file .ipa from 'Manage' and 'Edit', download and test my certifates, windows seems to work ok. Then I created the new .ipa file (after deletion of the one on my desktop and iTunes) but when I sync it back on my iPad is not up-to-date. It is always the first version of my folio without changes.

  I tried to create a new application from the beginning, but the serial number unique edition no longer works. So my only solution is to update my folio, right? But what is the right way to do it? Am I missing something? I found no answer in the guide step by step on this issue.

  Or is it possible to completely delete the first version in DPS App Builder to recreate it without losing my serial number unique edition I have has not itself present Apple yet?

  I have something to do in the Folio Producer?

  Thanks for your help.

  Julien.

  Single edition series is a use of time, so change is not possible your end directly in case you want to use the same serial number. In this case, you must contact the technical support of DPS, who can get an approval on a serial number reset after reviewing the need.

  In this case, I'll take this offline with you regarding the forum post # http://forums.adobe.com/message/5597607.

• License y DPS App Builder / License & DPS App Builder

  Hola:

  I have a license the Creative Master Suite 6 old. Estoy doing una con publication Indesign y DPS y cuando, una vez terminada paso por el DPS App Builder not me already crear el .ipa.

  It against correctamente todos los have me pide, tanto como archivos DEV graphic y Mobile de Desarrollador of Apple. El problema viene cuando introduzco el serial number in the part of activation of the publication. I don't dice as ese serial number none are valido y no puedo crear the publication.

  The publication puedo ver sin problemas in el Adobe Content Viewer.

  ¿Sabeis if tengo tener una license Edition simple o Creative Cloud one parte of the CS6?

  MUCHAS gracias.

  *---------------------------*

  Hello:
  
  I a purchased license of Creative Master Suite 6. I do a publication with InDesign et DPS and when it s done and I put the throug DPS App Builder he doesn't let me create the. Ipa.
  J’ai entered all requirements, two graphics files and Mobile and DEV Apple. The problem comes when I get home serial number on the activation of publication. He told me this serial number is not valid and I can not create publication.
  I can see the publication with any problems in the Adobe Content Viewer.
  You know if J’ai to buy a simple edition license or Creative Cloud membership apart of the CS6 license?
  
  Thank you very much .

  You must either purchase a full subscription to creative cloud or a single edition license. The converted copy Creative Suite Master Collection 6 does not include a license for simple editing.

  Neil

• Bundle ID @ DPS App Builder

  Hi all

  I have a problem, I want to publish my application with the DPS App Builder but undortunately I put false profiles provisioning inside - so I can not complete the process. My problem now is that I can't change the provisioning profiles - Builder app dps says "the Bundle in mobileprovision ID is not the same beam used in the application ID".

  I ve given running the process and everything worked - I put in the provisioning profiles right but now, of course, my serial number is already used by the application that is not over.

  What can I do now?

  Please help ;(

  Thanks in advance

  Seems that you own a unique edition of DPS. Can you PM your serial number and phone number, I will update your seial number.

• series DPS app builder cloud creative membership

  Hello

  I have a creative cloud subscription, but I can't find my serial voor my DPS App Builder. Anyone?

  Simple editing DPS is more included with Creative Cloud.

• DPS App Builder does not CS6 Folio Builder Panel

  I am trying to test an application and to Create App step. However, when I use the Panel Builder Folio > Create App to order, enter a loop of DPS App Builder telling me I have to go to disconnect from DPS App Builder and go through Folio Builder Panel > Create App order.

  So I disconnect, go through the process again. Then in the App DPS generator, I can only "manage" my apps (I didn't as I have now deleted) I'm not able to create a new application of the table edge DPS or via App Builder.

  I am really struggling with this now as given that the upgrade to V28 DPS tools, nothing works and I can't move on Adobe for some techinical on DPS support.

  Can anyone throw any light why a person with a creative cloud account, not published applications, and all the correct certificates generated does not have the ability to create a new application for a complete Folio, with a. Zip file ready and waiting to go...?

  I'd appreciate it really any contributions to this number

  After a difficult journey, this simple solution cured this issue:

  1. Quit InDesign and all the other CS apps.
  2. First file, delete the opm.db is "your username" in /Users/ / Library/Applicationopm.db, and then start InDesign and try to connect to the control panel.

  I also remove the InDesign file (hold SHIFT, CTRL, ALT, CMD on startup of InDesign) as advised but don't know if that makes a difference.

  I'm really happy it seems to work again. Phew

• Cannot start DPS App Builder

  Hi

  After a long time only working with DPS2015, I do some chores with DPS2014 SE.

  That's why I tried to start the DPS APP Builder. But I can't launch:

  * In Indesign with folio chosen, I can click on 'Create' App. then I see a gauge "App Builder is underway" but subsequently no app Builder.

  * Apple Spotlight or in Applications I find DPS App Builder. But clicking on it does not start the application.

  * I already downloaded the latest Version (32.4.5) from the Adobe website and installed.

  * I already removed the app and installed the new.

  * I rebooted my macbook.

  * I uninstalled App Buiolder DPS by moving it to the trash

  * I emptied the trash, too (and emptied the download folder, too)

  * I deleted the browser cache

  * I re-uploaded the DPS App Builder Image and installed again - no problems

  But I can't throw :-(

  Any other ideas?

  Thanks

  Hans

  PS: I also can not start previewer folio (tool that I did not really, because I test better with the Adobe Viewer on my iPad. But maybe the two things have the same reason.

  Yes, these are the two most recent versions. I do not know why you can no longer launch DPS App Builder. Have you entered in the Applications folder and tried by double clicking on the app? If so, I would like to delete it in the Applications folder, reinstall it, and then try again. If this does not work, contact technical support.

• DPS App Builder does not work

  Hi, the DPS App Builder does not work, I can not move the App and cointue details screen fill info. The 'next' button does not work. Do I have to pay a company account?

  

  Creative cloud no longer supports DPS Edition single starting from May 1. You can learn more about how to get a license DPS looking ions.html https://helpx.adobe.com/digital-publishing-suite/help/digital-publishing-suite-pricing-opt.

  Neil

• I need DPS App Builder.

  I need DPS App Builder. I have a CC account (individual). Any upgrade I should take into account?

  DPS app builder is only available for MAC OS, it can be downloaded from this link: http://www.adobe.com/go/digpubsuite_vb_mac

• Cannot advance in DPS App Builder

  Hello, I'm in DPS App Builder App details stage. I have tabled on behalf of the application, and the title, but cannot advance to the next screen. Have updated Indesign 2014, restarted - still have the same result. The button 'Next' highlights, but is not active. Thank you! James

  This occurs when you try to create a simple editing application and did not start App Builder via the menu item Create App in Folio Builder Panel. To create simple editing applications, you must launch App Builder for Panel Builder Folio.

  Neil