serious over heating, fan very noisy especially when games

Similar Questions

• Fan noise noisy 'as' when using PC

  When that I first start my Desk Top HP Pavilion a1101n I get a noisy fan 'as' at the beginning of the process start sound which is OK. But this same intermittent playback sound while using the PC. Anyone know what could cause this noise?

  As noted earlier, some fans will accelerate at initial startup (according to the model # and the version of the BIOS) .so relax.

  The fans will increase with changes in internal time. It is more common.

  Here's a nice its surveillance program, called CPUID HWMonitor

• fan noise noisy dv6 when you turn on / prior bios version?

  I just got a brand new Pavilion dv6-2150us. I used it a few hours, with several Turn-off & ons, and everything was nice and quiet in the ignition until I flashed the BIOS to the F.1A version. Now when I turn it on - the second, I click the power button - the fan goes full bore (whooOOOOOOOOOOSSSHHHH) for 3-4 seconds, then settled into a low hum. This happens even after it sat overnight, it is not a question of latent heat. I disabled the 'fan always on' setting in the BIOS, but I still get the WHOOOOSH. Anywhere where I can find the previous BIOS and this flashback in time?

  I get the same thing on m Dv6 after upgrading the BIOS. He was supposed to "improving fan behavior" so maybe it's a function of power management where the fan will operate at different speeds what do your do, rather that running at a constant speed. It's the only thing I can think of. My GPU and CPU appear to be running a little hotter on idle but (I have a model with an i7 and GT 230 M). Who knows, he has installed fine, just different past, thus the exact improvement, I don't know.

• Tecra S2 very noisy fan

  I just got my (used to have a S1) S2, but the fan is very noisy. It is noisy it is even annoying me during labor.

  I updated the driver in power saving mode and the power to register the software. But een noise remains.

  The fan also seems to operate continuously at full speed. Especially when loading the batteries upwards again.

  In battery mode
  In battery mode the fan starts, goes to high speed, stops for a short period, starts, going at high speed, stops for a shotr then that implemented site, etc etc this cycle is repeated over and over again. Very annoying.

  Why as with the S1 series where the fan seems to work constantly but that at low speed if you do not hear it.

  Mode full power
  The fan only is in battery mode back regularly at top and goes down to reduce speed also with regular periods. Why not let the fan turns at average speed?
  And as written above when the battery GET fans continue to run at high speed noisy!

  Is there an update of the material of possibel with a fan with less noise? Maybe by any other type of fan.

  I think to go back to my S1 and sell this S2 as it is very boring school work.

  Hello

  As much as I know on some units the fan running normal.
  It is normal that the fan make such a noise.
  I know that it is possible to run 3rd party tools to let the fan run all the time in slow speed.
  I think that you can find in the net.
  In addition, you can try to do the BIOS update if one available on download from Toshiba site.
  You can find them all on

  http://www.toshiba-tro.de/subpage/BIOS.html

  By the way the only way to change some settings of the cooling fan you can find in power management.

  Good luck

  Good bye

• very noisy fan

  very noisy fan does not stop

  Reset the SMC.

  Barry

• Brand newThinkPad x 1 Carbon20BS very noisy fan

  My new ThinkPad has a very noisy fan. This fan is noisy even with the only window open. Have I not a dud? Anyway to fix this easily?

  Thank you.

  Discouraged, I am hopeful for a solution.

  Good day and welcome to the community.

  As you say this is brand new, I would recommend that you contact the Service (info below) to discuss and get their advice.

  Kind regards.

• Hi I hope someone can help. I find that when I increase the clarity on an image, it becomes very noisy/grainy. I told myself there is a tool to Denoise, but I can't seem to find it on lr5. I watched the tutorials, but they seem to be for lr4

  Hi I hope someone can help. I find that when I increase the clarity on an image, the image becomes very noisy and grainy. I told myself there is a tool to Denoise images but I can't seem to find it on lr5. I saw a couple of tutorials but called lr4 lr5 not. Help!

  Judging by the before and after shots, the original was very underexposed and you he cleared up in LR. Where only a small amount of light enters the camera, these pixels have a weak signal (image) / noise. Subsequent clarification editing software will make the sound a lot more visible, much larger than a dose of clarity. Conversely, lower the tone of an overexposed image will produce an image with less noise because S/N, in camera was higher. For this reason, it is advised to give, if possible, the exposure as much as possible without exceeding the point of clipping to the brightest highlights. In this case, with the sky in the background, you probably might not have increased the exposure of many, but you could bring the sky just before clipping, relying on the capabilities of Lightroom's sophisticated recovery allow to darken the sky during editing, which would have reduced the amount of required clarification for the pilot and the trees.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• My MacMini3, 1 is over heating

  OK my mac Mini started yesterday more than heating. I noticed a few weird black it flashes on the screen when it froze. then he did say to reboot the entire screen. I left it a trendy but from what I've read until its over heating so that I opened it upward and have tried to do jump out which way. (Out more dust) is there a better way to stop heating. I raised him like 6 inches to help get more air. Should I put a small fan to him from downstairs?

  End of 2009 Mac Mini. I'm on it now other then that its been a wonderful mac

  Install a speed temp app and the fans to see what happens. Maybe a fan problem. I use

  http://www.CrystalIDEA.com/Macs-fan-control

  Yu can post a screenshot of what apps shows

• Qosmio F20-149 is very noisy

  My laptop is very noisy. Constanstly it is vey, can someone help me please? Any updates?
  Thank you!

  Hello

  Qosmio F20 is a laptop upscale with a heavy performance.
  The strong CPU and graphics card produce a lot of heat, which increases the temperature. It must be cooled. The fact is that for cooling this laptop you need a high-end modules, and cooling fans. These fans make a noise.
  There is a possibility to control the fans. In the energy saver, you'll find options that are responsible for the use of the CPU and fans.

• my lap top was close without warning or command especially when I watch movies online

  my lap top was close without warning or command especially when I watch movies online.i just ts will puff and must be reseeded again and again

  my lap top was close without warning or command especially when I watch movies online.i just ts will puff and must be reseeded again and again

  Looks like it's overheating.

  Use Bing or Google to search for information on your particular laptop (maybe the support forum for your Dell, Toshiba, HP, etc.) and determine how to combat overheating.  You may be able to 'fix' it's using compressed air to clean the vents and/or using a cooling pad under the computer laptop and even run a small fan external imed in the inlet.  May not be recommended by people IT but I often run my old laptop without battery to reduce heating.  And of course, you might have a fan does not properly.

  Doubtful that the malware is causing your problem.   You have every reason to think otherwise - no evidence of infection

  Kind regards...

• Laptop over heating is while playing games

  my laptop over heating when I play games, someone knows why!

  Inadequate, cooling, of course.  It is a common problem with most laptops.

  Make sure that all the laptops Airways are clear and work fans.  Consider getting a computer laptop cooling pad.

  http://www.NexTag.com/laptop-cooling-pad/stores-HTML

• Fans not correctly detect when you present to the RPM

  Why my 13 "2015 MB Pro fan not totally crank when the cpu temperature is like 100ᴼ? For example my CPU Core 1 is 80ᴼC and my Core 2 CPU is 100ᴼC, my GPU Core even 78ᴼC yet the rest fan 1300 rpm, whereas at this stage at 4000-6000 RPM.

  Is it because I have iStat Menus active? I put rules fan on this OFF application preference so he shouldn't meddle with the fan in addition to giving my sound status.

  I also wonder, Google Chrome would heat my laptop for the h

  Check your MacBook Pro with Apple Hardware Test if thermal sensor is something wrong.

• Camileo SX900 photo very noisy

  Hello

  I just buyed a SX900 camcorder.

  All right, next to the fact of the camera specifications seems very noisy even in daylight on a room lit not so high...

  I'we used both level ISO Auto or manual (like 800) with or without LED activated.

  Is it normal? I want to say I am very disappointed by that, because I took the camera for most due to fact was "announced" as works very well even in low light environments...

  Hello

  I think it's normal.

  I have another camcorder to another manufacturer and the quality of the image is lower when the lighting conditions are not so good
  But the image quality is very good in daylight.

• Tecra M5 - fan is noisy and constantly lit

  I have a new Tecra M5, to replace a M400... The M400 at first had a very noisy fan but Toshiba provided an update of the BIOS to reduce, which was good!

  The M5 does not have this luxury, the fan is constantly on and I know that the goal is to keep cool.
  But I know from experience we Shouldna´t have to be this strong. Someone at - it experience the same problems or know of a fix?

  Powersaver tool does not appear to reduce this and I noticed that the two options is grayed out and disabled now.

  Hello

  > The tool powersaver doesn t seem to reduce ve all and I noticed that the two options is grayed out and disabled now
  What options are just grayed out?

  I just read your first thread on the wrong BIOS update. It seems that you have updated the wrong BIOS on your laptop. Am I wrong?
  Have you noticed this fan behavior before update BIOS?