fan noise noisy dv6 when you turn on / prior bios version?

Similar Questions

• Fan noise noisy 'as' when using PC

  When that I first start my Desk Top HP Pavilion a1101n I get a noisy fan 'as' at the beginning of the process start sound which is OK. But this same intermittent playback sound while using the PC. Anyone know what could cause this noise?

  As noted earlier, some fans will accelerate at initial startup (according to the model # and the version of the BIOS) .so relax.

  The fans will increase with changes in internal time. It is more common.

  Here's a nice its surveillance program, called CPUID HWMonitor

• Satellite Pro L500 stuck when you turn it on and got the loud noise

  I use Toshiba for a long time, this is my 3rd Toshiba laptop (I bought it in June 2010), today I bought the helmet, when I plugged it in, it did not work. (When I talk with my friend through sky, I use the laptop speaker instead) Then my friend got me to download a driver for the sound.

  After the download, the helmet worked perfectly. BUT the speaker on the laptop did not work. Then I restarted computer again and this time when you turn on, it's stuck. stop boot on Toshiba logo later process, there are peep sound (not speaker, he is very strong), I can hear it from the inside. I can't do anything else, JUST close.

  Please help or advise where can I take my laptop to the service because I think that if people reply to my post and I don't know if I can fix it myself.

  I'm going overseas week next to the presentation and need to use the laptop. Do you think that if I take the laptop to the center of toshiba, they immediately understand problems? I am now using my old toshiba, and it is slow to make any presentation.

  Hey Buddy,

  You use normal headphones with headphone jack or USB?
  Headsets with headphones are usually easier handling in my opinion.

  In any case, at the time where your computer laptop doesn't boot and stuck on Toshiba logo, right?
  In this case, you must remove the battery and the AC adapter at a time and test it again.

  Check this box!

• Stor.e TV + loader error keeps coming up when you turn it on

  I experienced ongoing problems accessing the hard drive. Error message "No Loader" keeps coming up when you turn it on.

  The so-called 'solution' to this problem on this forum is to open the box and play with the cables. While I had some success with this method initially, disassembly of the box 10 times a week is not on.

  In desperation, I tried something else.
  When the message no. Loader is in place, I pass in the box and the new on the remote control.
  After 2 or 3 times, and then the folder of the HARD disk appears generally.

  I did that constantly now with great success. However, this suggests that the error no. Loader is NOT a mechanical connector with the hard drive problem, but (as usual) poor software (what else?).

  Dismantling of the unit is shut down for an extended period of time so may explain why this technique works.

  Put the unit on and off the power several times also solves the problem of file D are not on the network even if Win7 shows shop-TV-Plus as a mapped drive on NTFS (but can not find the file D).

  See the resemblance?

  Another thing that exacerbates the problems is poor ventilation of the device. The first thing that happens with this device, it's rubber feet sticky garbage fall.

  While this may seem trivial, the ventilation slots are under the device and will be blocked if he has no feet. I live in a hot country so this appliance gets very hot and behaves even more erratic, unless it is well ventilated.

  Ideally keep well away from other units and preferably sitting it on a small box in itself with the vents in many exposed.

  I always also have problems to read files FLAC, MKV. The unit sometimes lost synch with files FLAC which generally play OK and crashes or causes a large noise or white noise on the speakers (dangerous).

  Some just MKV files play quite although VLC reads. There are many other inconsistencies, but these are more boring.

  Everyone knows these problems or someone at - it other solutions for these problems?

  I don't think we can expect another software upgrade from Toshiba? Your dreams, pal.

  I m not Stor.E + owner and can not say much about the issues mentioned, but the first sounds of mentioned problem (error no. Loader") for me much more like a hardware problem as a software related issue.

  Files mkv seems to be supported.
  The mkv must be encoded in H.264 and MPEG-4 format
  This is what I found on a Web page.

  In addition, there seems to be an update of the firmware

  [3.5 inches StorE TV + ROM Image 2.12_UI1.0 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 271 & selSeries = 254 & selProduct = 6350 salt ShortMod = null & language = 13 & selOS = all & selType = all & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 80742 & DISO =-1 & driverLanguage = 42]

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Satellite A300 starts sometimes like when you turn it on

  Hey people,

  So my sisters laptop (satellite A300) was more than heating for basically since we bought it, but now I think that has caused a serious problem.
  Now it does not start at times like when you turn the backlight only market not even turn on.

  Hard drive does nothing basically nothing just the power light comes on it is all.
  But when I remove the charger and close the lid and open it again, wait like 2 minutes it magicly towers, so it's the startup problem.

  This may have something to do with it, but when you plug the cable that the tactile area (above the keyboard) lights up if laptops or disable but don't market not turn on if not plugged Chargers... also touch dosen't work area.

  So many things hope you understand all this, thank you!

  Hello

  I think that this is related to the problem of equipment; Maybe this problem of motherboard or power suply electronics problem.
  But that's just a guess and no one here will be able to say what's going wrong with your laptop until it has been checked by a technician.

  That's why I put t think you could solve this problem, install the new OS or new BIOS.
  I therefore recommend to request a laptop technician help and equipment to check.

• Satellite A100 has sometimes unresponsive when you turn it on

  I have a computer laptop Satellite A100, Centrino Duo. Sometimes I have problem when you turn on the laptop. The computer stops responding while it is turned on and when I reboot without disk scan is started which is usual when windows does not start successfully.

  Sometimes the computer starts and I log in the system but then the screen turns white and even when no disk scan is started when I restart the system.

  Pls advise.

  Hello

  In my office, I have the Satellite A100-504 and so far, everything is OK. I didn t notice something similar to described issue. Have you noticed this problem since the first day?

  Can you please tell me what A100 you have exactly? Is - this WXP or Vista preinstalled laptop?

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Hello

  Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Concerning

  It depends, but generally, no..

  Guidelines for the minimum system requirements are especially on what we and won't fix the bugs for.  Flash Player probably works on Windows Server 2000 and we will not intentionally break it or prevent you from installing, but we will also not fix it if it breaks.  In cases where it will crash on launch or some other out-of-box horrible experience, like trying to install on a Mac PowerPC, then we will prevent pure and simple installation.

• When you buy creative Cloud, what version of InDesign are your purchases?

  When you buy creative Cloud, what version of InDesign are your purchases?

  Hi arr1976,

  If you want to learn, you must sign up for InDesign - CC2014, as it is the last of all and allow you to use all the new features.

  We also telephone support for InDesign CC2014 case face no matter you what trouble with him, for CS6 and CS5, we have telephone assistance, support is available through Forums and Chat.

  See the links below for more information on InDesign CC2014.

  Using InDesign | Summary of new features

  Using InDesign | Using InDesign

  I would recommend if you can use Indesign CC2014 as a trial from the link below.

  Download trial version: https://creative.adobe.com/products/download/indesign

  Download help: CC help | Install, update, or uninstall applications

  Buy plans: plans pricing and membership creative cloud | Adobe Creative Cloud

  InDesign with commitment annual $19.99 / mo : https://creative.adobe.com/join/single_app/year/indesign

  InDesign without commitment annual $29.99 / month: https://creative.adobe.com/join/single_app/month/indesign

  InDesign with commitment annual $239,88 / year: https://creative.adobe.com/join/single_app/annual_pmt/indesign

  Please come back in case you have other queries.

  Thank you

  Atul Saini

• Satellite P100 locks when you turn on the WLan switch

  Hello

  My Satellite P100 turns off.
  It would not restart until I turned off the switch wireless lan.

  When it works, if you turn the switch back to a black screen occurs.

  Anyone can shed some light.

  Thank you

  It looks like a hardware problem.

  So in your case, I'd go to an ASP. Technicians can check your laptop and share the material if necessary.

  But before you go to a ASP try a BIOS update. You will find it on the Toshiba site and maybe this will solve your problem.

• My computer takes 9 minutes to start when you turn on. Where can I find the system configuration to abandon some of the start up programs that I don't need.

  I said the reason that my computer takes 9 to 15 minutes to complete the commissioning is there are too many programs that start automatically when I turn it on. They said to click on start and type system configuration and deselect some of the programs to start automatically. I typed in the run dialogue box but nothing.  How do I know where to find it and can you tell me which ones I should NEVER disable? Thank you.

  You type: msconfig in the Run dialog box.

  Under the Startup tab disable this you never or rarely use.

  You will always be able to use them whenever you want without going back to msconfig.

  On the Services tab, click Hide all Microsoft Services, and then choose the ones you want to start when you start your computer.