serious problem sync with Palm TX

Similar Questions

• Smartphones blackBerry sync with Palm Desktop.

  When I bought a "Bold" yesterday, AT & T, I asked the saleswoman if sync with Palm Desktop and if she would support Palm OS add-on.  I was told 'YES' at the same time to these two questions.  I tried to sync with Palm Desktop, without success.  Someone can explain to me how to synchronize with Plam Desktop and use Palm add, such as games and utilities?

  Thank you.

  linco1

  Hi linco1 and welcome to the forums!

  Here is the procedure to switch device Wizard and buy versions of Palm OS supported.

  I couldn't find articles referencing the Palm OS addons.

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB05459&sliceId=SAL_Pub...

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you 

• List of books of clients/email address that syncs with palm desktop 6.2

  Is there (and if not, I think that there should be) a list somewhere of whose books address e-mail clients can be synchronized with a palm Treo (palm Desktop 6.2 release)? I have fortunately use several palm handheld computers for about 6 years now and have been synchronization of AddressBook with Mozilla and Thunderbird now for the last few years. I currently have an m130, but it is time for a "smart phone" that I am a prioritization of all about two transport devices. Unfortunately, the Treo requires the 6.2 palm Desktop version that is not compatible with Thunderbird palm synchronization. I had the idea that Outlook (which I have never used or been exposed to) can be synchronized with the Palm, but something I read gave me the impression that I would need to buy third party software to make this happen, plus the $110 they want for Outlook. I'd like to think there are other choices for someone who simply wants to synchronize their smart phone with the address book of their e-mail client. It seems that this ability to sync would be essential to the turnover of palm and a list of all these possibilities of synchronization would be extremely beneficial for sales, including new sales to individuals are not already initiated on this kind of subject. The absence of possibility to synchronize with Thunderbird can cause just sticking with my old m130 awhile longer and give up the idea of a new nice smart phone.

  Hello and welcome to the Community Forums of Palm.

  I haven't looked lately at the T-Bird plugin for Palm Desktop synchronization... What do you use (apparently successfully)?

  Also what version of Palm Desktop are you using currently?  And what version of Windows?

  In short, unless your desktop is Windows Vista, there is no need to use Palm Desktop 6.2.2.  All new Palm OS Treo or Centro syncs with Palm Desktop 4.1.4E.  The only practical thing PD 6.2.2 is Vista compatibility... it works equally well on Windows XP, but there is no need to use it.

  Hope this helps your decision.

• Centro of contacts will not sync with palm desktop

  My centro palm contacts are not syncing with my palm desktop. I checked my user name and parameters, and they are all correct. Who is wrong?

  What error do you get?

  Can you post the log of hot sync?

  Message relates to: None

• Problem syncing with iPod Nano

  I have an iPod nano 3rd generation. He stopped properly syncing with iTunes. I have the latest version of ITunes and Windows 10. It is always synchronized automatically before. The computer recognizes the iPod and it's synchronization on iPod, but not on the computer screen. None of the songs I bought on iTunes since it began have been added to my iPod. I also noticed that new Playlists, I added to iTunes also syncs.  Maybe it's the same cause.  I appreciate your help. I'm nervous about what he is going to erase my iPod and then Resync.  I don't want to end up with nothing on my iPod!  I spent hours trying to understand, without a bit of luck. Thanks a lot for your help!

  One thing to check is the parameter to sync music on settings of music from the iPod screen.  Here is a screenshot showing the screen.

  

  Perhaps the box sync music got disabled for some reason any.  If it is not checked, the iPod is currently set to manually manage the music.  It will always 'sync' when it is connected, but the content does not sync automatically. However, existing content on the iPod.

  NOTE: If you change this setting (and apply) Sync music is currently not checked, all the songs on the iPod that are not in your iTunes library will be lost.

• Visor in sync with Palm access 6.22

  I am running Windows & and can visit Palm 6.2.2 on my desk.  I have a visor with Palm OS 3.1H3.

  I'm trying to synchronize your handheld with the desktop and nothing seems to move in both directions.

  I lost my system and had to reinstall and I lost all my programs.

  I also can't seem to find a copy of the addresses and calendar files I had until I lost everything.

  I tried to register on a regular basis, and I think I should have a recent copy of the DBA to import.

  I think remember someone wrote an app to allow synchronization to work, but I don't remember where I found.

  Hello and welcome to the Palm support community.

  The application you are looking for is www.pimlicosoftware.com PalmHotsyncSetup.  Good luck.

• Sony clie hot-sync with Palm desktop on Vista (32 bit)

  I got my Clie TH-55(Palm OS 5.2.1) for some time now, say 2 years, but recently, I made the switch to Vista (not by choice, I got a new laptop for free). I had been synchronize my CLIÉ Palm Desktop and so when I got my new laptop, I went and download desktop 4.1.4e in the hopes that I could continue the sync on vista. The installation went well, it is, I can do a hot sync but none of my data transfers. If I create a new contact on my handheld, it will not be displayed on the desktop and even vice versa. When I check the hot sync log, it says that there are no errors. I didn't know if I should go to the forums of Palm or Clie forums so I apologize if this is no longer a Clie problem which should be in the forums of clie. Thanks in advance...

  
  

  Message relates to: None

  I found the problem, it had to do with the running of the Office to palm as an administrator. Once that I thought that was the problem, I put it to always run as administrator.

• Help of Smartphones blackBerry to sync with Palm Desktop

  Hello:

  I need help on how to synchronize or transfer all my files, calendar address etc... my Palm Desktop to my Blackberry 9000 "BOLD".

  I saw the switch device Wizard in the Office Manager, but when I clicked in there the option click in Palm is not accessible.

  Thank you.

  Hi olive_cin:

  I just did this last night, synchronize Palm with Outlook, then synchronize Outlook with Blackberry with all my categories intact in my BB.

  You can also create new categories in your Outlook Express.

  Thank you Bold_Sue and olive_cin for your advice and your entries.  My problem is now solved and I have no need to carry a separate Palm and a separate cell phone.

• Problems syncing with GPIB Read on a SR400

  I'm using LabView to control a meter of photons SR400 of Stanford research systems. Can control the box easily, I'm having problems with reading the correct data in the box of. I get incorrect values of 0 ', 6 and 134' rather than real account numbers. I see the correct values on the display screen, but GPIB reads bad.

  It's what I've tried and what I've learned:

  • At first, I was getting random 6 error LabVIEW (from reading GPIB) which would prevent my program to run. To resolve this problem, I put a case Error statement after she and simply write the word ERR in my data file and move on to my next point data. This stopped my cessation program, but started badly reading the values using reading GPIB.
  
  
  • The SR400 takes data for N periods on two channels, A & B. The first column of the channel A every 6 seconds and the rest of the columns on both channels would be regular values. However, the problem got worse and my first column of the channel began to write 0s, the second column of the channel A would be 6 s with some 134 s and the rest of the columns would be nice. But, if I had only 1 time for each column, I now have data lost on two channels A and B. A channel would be of 0 s and channel B 6s and 134 s.
  
  
  • This problem is sporadic. I can't control when it arrives. Today he works. Yesterday's didn't.
  
  
  • It seems to be a timing issue, but I don't know what I can do about it.

  My questions for you are:

  1. Is it better to use GPIB or VISA to communicate? I use GPIB cabling, so be it.
  
  
  2. How can you correct problems of timing in GPIB?
  
  
  3. Any suggestions on how to improve this?

  I joined code of 8.2 and 2011. I'm trying to convert our code in 2011 to see if it solves the problems. The VI with GPIB Read is CollectData/TakeData and it is called by a VI, where he gets called frequently, but the reading and writing of all MTP recharge time is done by data files CollectData/Take.

  Thank you all in advance for your help. I'm a grad student and still learn from these electronic and LabVIEW.

  Start by lowering of the busspeed. I think that 1 uS is more fast enough for the handshake and then I would disable autopolling.
  You can do it in Max settings for your gpib card.
  Low level visa uses gpib, but never use it directly. In any case the speed is completely determined by the slowest device on the bus, complaining the sr400

• Zire 72 s sync with Palm Desktop 6.2.2?

  Until now I used Palm Desktop version 4.1, which seems to have "disappeared" from my PC. I was HotSync with my 72 s Zire. It seems that the latest version of Palm OS downloadable Desktop (excerpt from the HP site) is version 6.2.2. Does anyone know what to download this latest version on my PC, then I'll be able to download information from my 72 s Zire and continue in the future HotSync. Or, put in other words, Version 6.2.2 work with Zire 72 s? If not, can you tell me where to download the 4.1 version of?

  Here are all versions of Palm Desktop. Officially, Zire 72 came with version 4.1.4e.

  http://KB.hpwebos.com/wps/portal/KB2/common/article/33529_en.html

• Problems syncing with my Mac and my "BOLD" blackBerry Smartphones

  Help! I'm new to Blackberry and tried to synchronize my 9000 "BOLD" on my Mac (Entourage). My computer does not even recognize my device. I read a lot of posts in this BB site, the PocketMac site and Apple's site, but there is no definitive solution to this problem.

  I installed the latest version of the PocketMac and have also installed the recommended update. When I plug the USB cable from my phone to my computer, it tries to sync but I get this error:

  [04:50:26.621] unable to connect to BlackBerry (error 1); jump.

  Can someone tell how to fix this?

  Hello richchin,

  This error almost always means that PocketMac struggled to find the device for one reason or another. I have included an article that should be very helpful in this work.  My experience is that uninstalling and reinstalling PocketMac, followed by deleting .kext files (as described in the article) and then the installation of the update of the driver will give the best results for you.  Please also restart the computer when you are prompted, and then at the end of the process before trying to synchronize.

  Here's the article I mentioned:

  Title of article: mistake1. (jump) is displayed whensynchronizing

  Item number: KB15429

  Link: http://www.blackberry.com/btsc/KB15429

• Problem Bluetooth with Palm Treo Pro

  I just bought a Jensen with Bluetooth receiver and I can't seem to get my Treo Pro to connect so I can use the hands-free function. I tried even after installing the latest patch. I tried with my 680 and it worked like a charm. Can someone tell me if this problem is common with the Treo Pro? And also how can I solve this problem.

  Thanks for the tip. The hard reset worked perfectly. Now I can enjoy the world of hands-free.

• Problems syncing with FK

  Hello
  i ' AM trying to use Data Modeler and problem met:
  
  At first, I imported the data folder (Oracle 11). Right after that, I try to synchronize the model in the data directory. And I get differences (but nothing is changed in the database or in the model). Each FK in my model is marked with (!). Why is this? It's bug, or I did something wrong?
  
  In compare model that every CF has 'Primary key' colored red and the checked checkbox.
  
  In these links, you will find screenshots:
  http://ImageShack.us/photo/my-images/827/comparew.jpg/
  
  http://ImageShack.us/photo/my-images/197/ddlot.jpg/
  
  Also note the FK column preview of the DDL order! they are wrong! I tried the same actions to Oracle 9 the problem with differences is the same, but the column in FK ddl order is just (at least to the table I checked).

  Hello

  Thank you for pointing out these problems.

  I assume you are using the 3.1.2 more recent version of the fix. FK highlighted incorrectly is a unexpected side effect of an update that went into this release.

  I connected a bug on the incorrect order of the FK columns in the preview of DOF for comparison/merging of views.
  It seems that this problem occurs if the referenced primary key columns are not in the same order as in the Table definition.

  David

• BlackBerry Smartphones problems syncing with Outlook 07? Look here for a guide on how to solve this problem!

  
  

  Thank you for your comments. It's the kind of contributions that make the valid community forum. I hope this will help a lot of people using Outlook 2007.

  Good day.

• Palm Pre is no longer syncing with Google Calendar

  I had my pre for 4 to 5 weeks, and when I got it, I configured the calendar to sync with my Google Calendar.  Everything worked well.  At one point, he stopped synchronization.  If I add something to the calendar via Google, I do not see on my pre and if I add an event on the pre, he never appears on Google.  Of course, I tried the option sync nothing helps.  I don't know whether or not this happened around the V1.1.0 update.  Is anyone having problems syncing with Google Calendar?

  THX,

  Brett

  Hello Bartman,

  You can try remove and add the gmail account to the pre.  If this does not work, try to create a test gmail account and add it to the front.  This will tell you if your email account or the Palm Pre.

  Let us know what happens...

  Thank you

  Cola