Server hosted locally for Cocomo

Similar Questions

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• Host process for Windows Services stopped working and was closed & Windows must now restart because the DCOM Server process Launcher service terminated unexpectely

  my computer keeps stopping and restarting itself. I get the same messages of 2 error: host process for Windows Services stopped working and was closed and; Windows must now restart because the DCOM Server process Launcher service terminated unexpectely. How can I fix? I used the norton support, run analyses of many, nothing has helped.

  None of the above works though... I didn't know by another forum to download Hitman 3.5 http://www.surfright.nl/en/downloads/home that he got rid of a virus that norton, Norton 360 and Malwarebytes antivirus support could not. I had no problem since :)

• (3) maximum number of hosts allowed for this edition of vCenter Server has been reached.

  The following error message appears in my events of vCenter server every minute or so:

  "(3) maximum number of hosts allowed for this edition of vCenter Server has been reached.

  I have a license of vCenter Server Foundation (4.0) with three hosts. I am aware that this license only supports three hosts. Why vCenter should log an error every minute to tell me that? Can I have it also ignored it clutter visually the events list?

  And to meet me once again, VMware has just contacted me and he was recorded as a bug and will be fixed in update 1 when coming out.

• VMware vCenter Server 5 Essentials for vSphe

  Ho una licenza VMware vCenter Server 5 Essentials for vSphere labor-intensive. Devo aggiornare UN host currently che ha una licenza di free vmware 5.

  -Posso installare versione 5.5U2 e usare the licenza in oggetto?

  -Can I download ed installare versione 5.5U2 o devo partire dalla 5.5?

  Grazie. Gianni

  Se you want to upgrade an ESXi 6 prima di tutto verificare che devi he tuo sia nella HCL di VMware Server: VMware Compatibility Guide: search system, check all the components, BIOS e controller compresi. SE aggiorni an ESXi 6 you attiva una versione 60 giorni di Enterprise Plus trial. In the meantime fai della licenza Upgrade alla versione 6 (to hai active UN contratto di supporto e following) e enter it shows.

  ISP attenzione durante aggiornamento, clear no I locali datastore: http://pubs.vmware.com/vsphere-60/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-60-upgrade-guide.pdf

• NAS Server esxi local?

  Hi all

  I'm kinda new to ESXi, even if I'm running a server with it for a little over a year now. I use a HP Proliant ML350 G6 with a P410i raid (on-board) controller. I'm running a VM Windows Server 2012 R2 I want to use as an IIS server, but also as a file server. For a starter, I had 2 1 TB sata discs I have work in raid 1 (for storage) and 2 300 GB scsi drives in raid 1 (for the OS). When I go into the VM options, I click on add a device and under hard drive I see raw device mapping, but it is grayed out.

  I heard that it's a bad idea to use vmdk for storing files (discs virtal) because it may be corrupted on the 2 discs. I was wondering if there is a way to ungray raw device mapping and map of the Bay of Windows server VM 1 TB HARD drive? I heard I could buy a NAS box and plug it in, but I don't want to waste money if I can do this directly from the ESXi.

  Thank you very much!

  > because it may be corrupted on the 2 discs.

  Who said this? Both disks are presented to the ESXi hosts as a single logical volume, and the RAID1 is maintained by the controller P410.

  I see no reason why you should not create a VMFS data store and use a virtual drive for the file server. Don't forget to leave a free space on the disk on the data store if you want to use snapshots or change the settings of the virtual drive to "independent" persistent in order to exclude the virtual disk snapshots.

  BTW. local disks and volumes are not supported in the ROW, so they are filtered by default.

  André

• How to stop a pop up called GENERIC HOST PROCESS for Win32 Services.

  My girlfriend told me to make sure that my computer is Service pack 3 and she told me how to tell by going to START and in RUN type winver. I did it and I don't know

  If it is only a coincidence, but every time I turn on the computer this windo appears

  who says GENERIC HOST PROCESS for Win32 Services. That there is a problem

  How can I stop this?

  @Cookie: I did not reply to your previous post because you not answered all my questions. That being said...

  You see the effects of a hijackware infection.

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now post the logs required in a forum appropriate for support by an expert in the field. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3

  How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.

  When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.
  someone has a better solution that take care of this problem.

  Hello

  Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:

  http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx

  Hope the above information is helpful.

• Generic host process for win32 services has encountered a problem and cannot update windows

  Whenever I start my computer, I get this error message "generic host process for win32 services has encountered a problem and needs to close." The details of this problem are:

  (szappname:svchost.exe), (szappver:5.1.2600.5512), (szmodver: 0.0.0.0), (offset: 001 has 6240), (szmodname: unknown)

  c:/DOCUME~1/owner/locals~1/temp/wer94ea.dir00/Svchost.exe.mdmp

  c:/DOCUME~1/owner/locals~1/temp/wer94ea.dir00/appcombat.txt

  I also send an error report whenever this happens.

  The computer is running XP, but lately some settings have been changed such that the display is windows classic instead of XP.

  In addition, I can't run Windows Update completely. It freezes / hangs up in the middle of the update. I have also no audio.

  Please help, I ran SuperAntispyware, Spybot, and Avira. I'm lost!

  Reinstalling the operating system is unable to solve your problem. There is no need to do this if the problem is not related to the operating system and you find that you are back where you started.

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on that more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  Hope this helps, Gerry Cornell

• Please help: System freezes with error message "generic host process for win32 services has encountered an error and needs to close."

  Please can anyone offer help - whenever I start my PC it freezes
  then displays an error message "generic host process for win32 services has.
  encountered an error and needs to close. »

  In this error message, I get more information:

  szAppName: svchost.exe szAppVer: 5.1.2600.2180 szModName: ntdll.dll
  szModVer: 5.1.2600.2180 offset: 000122ba

  more information:

  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\svchost.exe.mdmp
  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\appcompat.txt

  I tried a lot of things: update drivers, run Ccleaner to check the registry,.
  checked for malware, Virus, uninstall xp service pack 3... Is there
  anything else I can try?

  After I clicked through the error messages above appears the taskbar
  Crash, then reappears, but with graphic reduction (gray color)

  I checked "Event Viewer" in "control panel" from here I get
  the following error message:

  Failed application svchost.exe, version 5.1.2600.2180, failed module
  ntdll.dll, version 5.1.2600.2180, fault 0x000122ba address.

  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 73 76 63 ure svc
  0018: 68 6f 73 74 2nd 65 78 65 host.exe
  0020: 20 35 2 2 31 32 36 30 5.1.260
  0028: 30 2 32 31 38 30 20 69 0.2180 I
  0030: 6th 6f 20 74 64 6 c 6 c 2nd n ntdll.
  0038: 64 6 c 6 c 20 35 2e 31 2nd dll 5.1.
  0040: 32 36 30 30 2 32 31 38 2600.218
  0048: 30 20 61 74 6f 20 66 66 0-off
  0050: 73 65 74 20 30 30 30 31 the value 0001
  0058: 32 32 62 61 22ba

  also an another error at the time of the accident

  0000: 42 75 63 6 b 65 74 3 has 20 bucket:
  0008: 31 32 39 36 37 35 38 33 12967583
  0010: 36 0D 0 to 6...

  Fault 129675836 bucket.

  I am extremely grateful for any help, this problem is about to drive me
  crazy!

  I solved my problem...

  To temporarily disable closing kick, after that the warning popup will appear, I went the prompt commands and typed in 'shutdown-a' so I could help out.

  Then I went in under the Application Event Viewer and saw that some services weird I don't need anyway did not start because they had missing information/dll registry info.  It was originally the svchost.exe service to fail (and default recovery for this is to reboot)

  I stopped the weird service (in this case, it was Hello) because I didn't need anyway, and went into the properties of this service and past earlier in "Manual" "automatic".

  Good luck

• Someone at - it smart enough to: «host process for Windows Services has stopped working...» » ?

  I have spent a week on this problem, looking all over the internet and doubt that someone knows enough to solve this problem. I've been a software engineer for 30 years and never worked on an operating system such as buggy windows Vista (or windows)

  I got TWO errors. They may be related.

  = The first is with Windows Update

  -If you know, I tried:

  At ran windows BITS difficulty
  ran sfc/scannow (it found and fixed some iexplorer 8 _)
  has ran defrag and
  has ran chkdsk
  drivers replaced with the latest news from Toshiba
  has run hardware diagnostics - no problem

  I tried with and without firewalls and AV running.
  I don't run AVG control and malware - no problem

  Windows Update always fails.

  Machine: Vista 32 Home Premium SP2 on a Toshiba Qosmio computer laptop X 305-Q705 4 Gig Duo P7350 Intel with nvidia

  Otherwise, Windows works fine. Net access is fine using Mozilla. Even correctly downloaded files. BUT

  I get this error: windows update does NOT. It gives an error "failed", whose code is:

  0X80072EFE-2147012866 ERROR_INTERNET_CONNECTION_ABORTED

  Also, sometimes strange, windows displays an error dialog box:

  "Host process for Windows Services stopped working and was closed"

  A check with AppCrashView (wer reports) gives these data:

  Version = 1
  EventType = APPCRASH
  EventTime = 129402052692496014
  ReportType = 2
  Consent = 1
  Response.Type = 4
  SIG [0]. Name = name of the Application
  SIG [0]. Value = svchost.exe
  GIS [1]. Name = Version of the Application
  GIS [1]. Value = 6.0.6001.18000
  GIS [2]. Name = timestamp of the Application
  GIS [2]. Value = 47918b 89
  GIS [3]. Name = name of the Module fault
  GIS [3]. Value = ntdll.dll
  GIS [4]. Name = Fault Module Version
  GIS [4]. Value = 6.0.6002.18005
  GIS [5]. Name = Fault Module Timestamp
  GIS [5]. Value = 49e03821
  GIS [6]. Name = Exception Code
  GIS [6]. Value = c0000005
  GIS [7]. Name = offset of the Exception
  GIS [7]. Value = 0004714e
  DynamicSig [1]. Name = OS Version
  DynamicSig [1]. Value=6.0.6002.2.2.0.768.3
  DynamicSig [2]. Name = locale ID
  DynamicSig [2]. Value = 1033
  DynamicSig [22]. Name = additional Information 1
  DynamicSig [22]. Value = 4a3d
  DynamicSig [23]. Name = additional Information 2
  DynamicSig [23]. Value = c79c8c21b0e4702d54b9aebf158b2ec4
  DynamicSig [24]. Name = additional Information 3
  DynamicSig [24]. Value = f371
  DynamicSig [25]. Name = additional Information 4
  DynamicSig [25]. Value = 3b5338b3aed6dc4728911b2d00a3b11f
  UI[2]=C:\Windows\system32\svchost.exe
  UI [3] = host process for Services Windows has stopped working
  UI [4] = Windows can check online for a solution to the problem.
  UI [5] = check online for a solution (recommended)
  UI [6] = check for a solution later (recommended)
  UI [7] = close
  UI [8] = host process for Services Windows has stopped working and was closed
  UI [9] = a problem caused the application to stop working correctly. Windows will notify you if a solution is available.
  UI [10] = & close
  FriendlyEventName = Stopped Working
  ConsentKey = APPCRASH
  AppName = host process for Windows Services
  AppPath=C:\Windows\system32\svchost.exe

  AppCrashview also shows the fault as module: ntdll.dll and once urlmon.dll

  The system event logs says:

  Application failed application svchost.exe, version 6.0.6001.18000, time stamp 0x47918b89, failed module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e03821, exception 0xc0000005, offset error 0x0004714e, process 0x7cc id code, start on time 0x01cbbafdcd8a8edc.

  = Error n ° 2

  I can work in SafeMode with networking (I'm in it now) using Firefox WITHOUT blue screens.

  Now, BOD (bluescreens) seems to be related to the use of the damndable IExplorer 8

  the crashdump gives:

  ==================================================
  Dump file: Mini012311 - 01.dmp
  Crash time: 23/01/2011 08:02:10
  Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x000000d1
  Parameter 1: 0x00000a54
  Parameter 2: 0x00000002
  Parameter 3: 0x00000000
  Parameter 4: 0x8304c49a
  Caused by the driver: iaStor.sys
  Caused by the address: iaStor.sys + 4349 a
  Description of the file: Intel Matrix Storage Manager driver - ia32
  Product name: Intel Matrix Storage Manager driver
  Company: Intel Corporation
  File version: 8.5.0.1032
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\Mini012311-01.dmp
  Number of processors: 2
  Main version: 15
  Minor Version: 6002
  Size of the dump file: 138 424
  ==================================================

  The drivers loaded in the memory range were:

  ==================================================
  File name: iaStor.sys
  Stack address: iaStor.sys + 4349 a
  Address: 0 x 83009000
  Address: 0x830e2000
  Size: 0x000d9000
  Time stamp: 0x4883d53b
  Time warp: 2008-07-20 19:15:55
  Product name: Intel Matrix Storage Manager driver
  Description of the file: Intel Matrix Storage Manager driver - ia32
  File version: 8.5.0.1032
  Company: Intel Corporation
  Full path: C:\Windows\system32\drivers\iaStor.sys
  ==================================================

  ==================================================
  File name: ndis.sys
  Stack address: ndis.sys + ce3b5
  Address: 0 x 83201000
  Address: 0x8330c000
  Size: 0x0010b000
  Time stamp: 0x49e02080
  Channel time: 2009-04-10 23:45:52
  Product name: Microsoft® Windows® Operating System
  File description: driver NDIS 6.0 wrapper
  File version: 6.0.6002.18005 (lh_sp2rtm.090410 - 1830)
  Company: Microsoft Corporation
  Full path: C:\Windows\system32\drivers\ndis.sys
  ==================================================

  ==================================================
  File name: ntkrnlpa.exe
  Stack address: ntkrnlpa.exe + b40e0
  Address: 0x82a3f000
  Address: 0x82df8000
  Size: 0x003b9000
  Time stamp: 0x4c0e557c
  Time string: 08/06/2010 09:36:44
  Product name: Microsoft® Windows® Operating System
  File description: NT kernel & system
  File version: 6.0.6002.18267 (vistasp2_gdr.100608 - 0458)
  Company: Microsoft Corporation
  Full path: C:\Windows\system32\ntkrnlpa.exe
  ==================================================

  Hey Joe,

  I see that you have updated your drivers.

  Have you updated your chipset for this PC drivers?

  Are you overclocking PC or running a RAID configuration?

  I suggest to remove all external devices during the diagnostic process, except the keyboard, mouse and monitor.

  If you think this error is with IE, you can try running it without Add - ons.

  Alternatively, you can try to reset the Internet Explorer settings.

  Here is some information on this process:

  http://support.Microsoft.com/kb/923737

  You can also check your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• host process for services windows at startup error

  This error pops up at startup - here is the report

  Product
  Host process for Windows Services

  Problem
  Stopped working

  Date
  31/01/2011 17:29

  Status
  Not reported

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: ole32.dll
  Fault Module Version: 6.0.6002.18277
  Timestamp of Module error: 4c28da13
  Exception offset: 0000000000181958
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: f91d
  More information 2: d1fbfad02eeb43414a2d21f43796e3d3
  Information additional 3:6918
  Additional information 4: 783907203602a4235922784fd8b07dfd

  Files helping to describe the problem
  Version.txt
  AppCompat.txt
  Memory.HDMP
  minidump.mdmp

  Thanks for any help!

  See if this answer can help you:

  THS response came from Savan H, Microsoft Support, moderator.
  Date: September 18, 2009

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/365fc5fc-5edf-427d-a4d8-859b74b05b7c For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• "Host process for windows has stopped working". It will then come my computer change Classic theme and eventually everything just stops and I have to restart my computer.

  Product

  Host process for Windows Services

  Problem

  Stopped working

  Date

  04/08/2010 17:28

  Status

  Solution available

  Signature of the problem

  Additional information about the problem

  Bucket ID: 1288359239

  Problem event name: APPCRASH

  Application name: svchost.exe

  Application version: 6.0.6001.18000

  Application timestamp: 47918b 89

  Fault Module name: ntdll.dll

  Fault Module Version: 6.0.6002.18005

  Timestamp of Module error: 49e03821

  Exception code: c000071b

  Exception offset: 000888f5

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: 0e02

  More information 2: b21b56b606e7544720668ce364087082

  3 more information: 0e02

  Additional information 4: b21b56b606e7544720668ce364087082

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Host process for windows has stopped working and was closed - another

  Hello, I had this problem for a month, can anyone identify and have a solution? Thank you!

  On the event viewer:

  Log name: Application
  Source: Application error
  Date: 2010-06-23 03:45:51
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Computer laptop-fan
  Description:
  Application failure application svchost.exe, version 6.0.6001.18000, time stamp 0x47918b89, failed module unknown, version 0.0.0.0, time stamp 0x00000000, exception 0xc0000005, offset error 0x0124f5c0, process 0x1fc0 id code, start on time 0x01cb12a81a351c94.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      27572
      Application
      Computer laptop-fan
     
   
   
      Svchost.exe
      6.0.6001.18000
      47918b 89
      unknown
      0.0.0.0
      00000000
      c0000005
      0124f5c0
      FC 1-0
      01cb12a81a351c94
   
  

  Reports on the problems and Solutions:

  Product
  Host process for Windows Services

  Problem
  Stopped working

  Date
  2010-06-19 10:47

  Status
  Not reported

  Signature of the problem
  Problem event name: BEX
  Application name: svchost.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47918b 89
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 0126f5c0
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Files helping to describe the problem
  Version.txt
  AppCompat.txt
  Memory.HDMP
  minidump.mdmp

  Thanks again!

  Hello

  IE was running is very important to the solution to the issue - check below.

  -----------------------------------

  BEX errors often are caused by toolbars such as Google, TrendMicro and others. You use one
  3rd toolbars in IE? Cause and solution is the same for Vista and Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave remnants behind which emits causes).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore advanced settings, and then click RESET - APPLY / OK

  IE - Tools - Internet Options - Security tab - click on Reset all areas - APPLY / OK

  Close and restart IE or IE with no addons

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java still
  installs and it causes problems - you never update Java to go back in and turn it off again). Look for other
  possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right.
  Allowed are usually OK and "unauthorized" are not always bad. If in doubt about a program, ask
  topic here.

  Could be that a BHO - SpyBHOremover - free - program of autonomous, needs no installation, download, unzip
  and run. Also not all the BHO is bad, that some managed bars of tools and features that you added.
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you never think malware updated, then
  run as a scanner.
  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• ISE server receives requests for authentication of the bridge VLAN, not the IP Address of the switch management

  Hello

  A 3850 catalyst switch has VLAN 20 (10.18.4.32/29) defined on it, which has a 10.18.4.38 gateway:

  D01-01-BWY #show ip short int vlan 20
  Interface IP-Address OK? Method State Protocol
  Vlan20 10.18.4.38 YES manual up up

  A server of ISE (SNS3415) is connected to a port configured on VLAN 20, with IP address of 10.18.4.33.

  01-BWY-D01 has to a management interface of 10.18.4.17.

  I created this switch as a device network in ISE and activated the RADIUS config and then configured the switch with the following commands:

  RADIUS attribute 6 sur-pour-login-auth server
  RADIUS attribute 6 support-multiple server
  Server RADIUS attribute 8 include-in-access-req
  RADIUS attribute 25-application access server include
  dead-criteria 5 tent 3 times RADIUS server
  RADIUS-server host 10.18.4.33 auth-port 1812 acct-port 1813 borders 7 1521030916792F077C236436125657
  RADIUS-server host 10.18.4.35 auth-port 1812 acct-port 1813 borders 7 02350C5E19550B02185E580D044653

  radius of the IP source-interface GigabitEthernet1/0/1

  The problem:

  When I test the functionality of RADIUS using the following command, it fails. HOWEVER, the customer (switch) IP listed in the error log in the front door of the VLAN 20 (!):

  test the aaa group RADIUS server 10.18.4.33 auth-port 1812 Capita123 user radius acct-port 1813! new-code

  10.18.4.38 is the gateway IP address of the VLAN that hosts the servers of the ISE, I don't understand why its listed in error as IP device logs!

  ource Timestamp 2016-06-22 16:38:02.826 Receipt of timestamp 2016-06-22 16:38:02.841 Policy Server GLS-ISE-01 Event 5413, accounting RADIUS-Request dropped Reason for failure 11007 could locate no device network or Client AAA Resolution Check if the device network or AAA client is configured in: Administration > network resources > network devices First cause Could not find the network device or the AAA Client while accessing NAS by IP during authentication. Type of service Box NAS IPv4 address 10.18.4.38

  Other attributes ConfigVersionId 118 Port of the device 1646 DestinationPort 1813 Protocol RADIUS ACCT-status-Type Update-intermediate ACCT-Delay-Time 15 ACCT-Session-Id 00000000 ACCT-Authentic RADIUS AcsSessionID GLS-ISE-01/255868885/32 IP address of the device 10.18.4.38

  If I reconfigure the switch to the ISE - peripheral network and give it the IP address of 10.18.4.38 (the ip of the gateway), my radius authentication tests suddenly becomes successful.

  can someone clarify the situation what is happening here?

  I need to be able to define multiple switches by their unique IP addresses.

  Thanks for your time

  m

  Hello

  The only time I saw that it was due to use a deprecated command: radius server host.  There was a bug on the IOS XR platform as well.

  Could you please reconfigure your order of RADIUS by using the new command: radius server? And test again?

  The doc of Cisco for the new order:

  http://www.Cisco.com/c/en/us/products/collateral/iOS-NX-OS-software/iDEN...

  Thank you

  PS: Please do not forget to rate and score as good response if this solves your problem